Windows 8.1 error message

i'm having sony notebook with i3,8gb ram,4gb graphics 320gb hdd....in the last month i'm using 8.1,due to some reasons i uninstalled 8.1 and came back to factory setting...and now i'm unable to install 8.1 in my note
it is showing an error message
something happened
setup has failed to validate the product key

Hi,
Let’s get things clear:
How do you install Windows 8.1 on your notebook?
Which edition are you going to install, Windows 8.1 or Windows Pro or Enterprise?
Which phase goes wrong during installation?
Alex Zhao
TechNet Community Support

Similar Messages

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix?

I-tunes won't download onto Windows XP. Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

Dv6 Notebook "Black Screen" following "Windows Blue Screen" error message. Caps Lock blinking!

I have a HP DV6 notebook. I left my computer on overnight and the next morning I woke up to find a Windows Blue Screen error message. It said to restart my computer. I was in a rush so I just closed the lid. When I returned I opened the lid and the screen was black. I pressed the power button to restart it and I haven't been able to restart it since. I now have a power light, a black screen and the CAPS LOCK light is blinking twice then a pause! Please help!

Hi btgclark,
I understand that you are having an issue with turning on your notebook and the CAPS LOCK light blinks twice and then pauses. The following document 'Computer Does Not Start and the LEDs Blink or the Computer Beeps' will walk you through the steps that you need to follow. For your error code, it means that the BIOS has a corruption failure. This document will walk you through the necessary steps to get this resolved.
If for some reason this document does not resolve the issue please provide me with the model number to your notebook. I have included a document 'How Do I Find My Model Number or Product Number?'
Please let me know how this works out for you, thank you.
I worked on behalf of HP

CM1312 NFP: WIndows 7: USB Error message ~"Lost Connection"

With the 1312 connected to my Windwos 7 desktop, periodically Windows gives an error message that indicates that it has lost connection to the printer. Unplugging and replugging the USB cable fixes the problem. Otherwise the print & scan functions work perfectly. Symptomatically it appears as if the printer goes to sleep and stops responding to whatever "keep alive" messages Windows might be sending. Is there a setting in the printer, in Windows or in the printer driver software that can prevent this message?
BTW, the other way to work around this problem is to just access the printer via the Ethernet but the scan funciton is not accessible via the network (an unfortunate limitation).

aluniewski,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

ITunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times.

iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

IQ525A - Two Windows Script Host Error messages, plus folders won't close

How do I get folders to close, when right clicking will not close them? I am running Trend Micro security and also have two Windows Script Host error messages appearing. I need to click OK to proceed each time I use IQ525A/
assume IQ is running in safe mode, as start menu and bar is white.Any suggestions
Thanks
Kitcat

Crash report:
https://crash-stats.mozilla.com/report/index/ab4ee242-57f1-4a84-baef-ca2202150308
Signature shutdownhang
Start your '''Computer''' in safe mode with networking. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Wait a few minutes (don't go anywhere), then close it.
Is the problem still there?

Syncing iphone with windows 7 contacts - error message outlook.pst not foun

I have set set up ITunes to sync my Iphone GS with Windows Contacts. When I sync I get an error message :
The file c:\Program Files\Common Files\System\Mapi\1033\Outlook.pst could not be found
Sometimes the error message comes up 2 or 3 times.
Secondly, my Iphone is syncing with something because an old version of my windows address book is now on my iphone. Of course if I add a new contact to Windows Contacts, it does not appear on my iphone.
I dont have Outlook installed on my PC. It was removed, but I guess I do have an old outlook.pst file from my old times with Windows XP.
So how does Itunes manage the sync and how can I stop it syncing with my old address book and use Windows Contacts? I have tried resetting my sync history but it did not work.
I am running Windows7 (upgrade from Vista).

I am also having issues with syncing my Iphone 3GS with the latest version on Itunes. I have for a long while now been doing just great. My contacts, phone numbers, emails have all synced very nicely, no problems. As soon as I downloaded the new Itunes 9.1 I can no longer sync contacts, and calendars, as usual.
I tried several things that were suggested to me in the troubleshooting but nothing has helped. It usually tells me that my computer is not set up for syncing, and after arranging that it still doesn't work. As well, it says it cannot find the requested services.
Please help.
I am running windows 7, and have been for a while, it's not windows 7, it's the new Itunes upgrade.

Windows Easy transfer , ERROR message when trying to copy settings to Win 8 PC

I have a new hp-TouchSmart Envy 23. It has 2TB drive.
I want to use Windows Easy Transfer to move all my settings and data from the Windows 7 machine to the new hp-TouchSmart (my older PC is hp desktop is model # m9177c and has Win 7 OS) .
I have used easy transfer many times and I am reasonably experienced user .
I just cannot transfer my settings and data to my new PC. I have therefore copies all my data to the hp-TouchSmart . However I need to use Windows easy transfer to move all my settings. I have a very large number of settings , macros and much else that would take a very large amount of time to re-type.
I get an ERROR message when I want to transfer my settings. It says I don’t have enough disk space. The file I want to transfer is only 10.5 GB (after I removed all my data). The new machine has 2TB and yet I keep getting this error.
I have tried every possible way of transferring the settings , including : external drive; flash drive; direct wire ; easy transfer cable etc. I keep getting the same ERR message .
I am sure Easy transfer must allow transfer from Win 7 to Win 8. BUT HOW?
PLEASE do help. I would really appreciate very much .
THANK YOU
Adam

This thread may be useful.
Windows Easy Transfer will transfer from one drive to the other to mirror the original drive. What I suspect is happening is that the program is grabbing the D drive (recovery partition on most systems) and trying to transfer it to the new system which should also have a D drive. If that is happening,t hen that error will be thrown.
Try using the advanced options and view the report to see what exactly is happening and triggering the message.
Let me know what happens.
The document in the thread is for a previous version of Windows, but you can search for Easy Transfer Reports from the Start screen in Windows 8.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Windows 7 logon error message

I have a laptop with Windows 7 installed when turning on the laptop the windows profile screen loads fine. On selecting any user profile including admin on loading the profile shows the following error message.
C:\Users\C:\Users\<username>\Desktop is not accessible
Then the system freezes.
I have logged into Admin on safe mode with same error message however system operates a little better and functional.
I have checked user profiles on regedit and the paths are correct for the user profiles i.e. C:\Users\<username>
Any ideas on how to restore the correct profile logon paths?

This one might help.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/cwindowssystem32configsystemprofiledesktop-is-not/8adbc6ac-64c5-4418-9223-95c92d2dc958
Also might ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_7-system?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1391380895705
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows - No Disk error message when connecting Ipod to computer

I recently connected my Ipod to the Computer as I have done for the last year and I am now getting an error message reading: "Windows - No Disk". It then asks me to insert a disk. I cannot cancel out, continue or retry which are the three choices. I eventually have to Ctrl + Alt + Del to close out Itunes. Can anyone help? Thank You.
Dell XPS Windows 2000

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

"Windows - No Disk" error message on file transfer

Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas Aas

Toomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

HT4236 Syncing photos using iTunes in windows revealed this error message "iPad Jayvee cannot be synced because it cannot be read from or written to ." Please advise asap how to resolve the issue. Thanks!

Please advise how to resolve error message - cannot be synced because it cannot be read from or written to.

Hello Janet,
I would recommend this article named 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod found here http://support.apple.com/kb/ht1207
Outdated operating system software
Make sure you have the latest updates for your operating system, which may include improvements for device connections. For example, many USB and FireWire improvements have been included in Windows Service Packs.Check for Mac OS X downloads. Check for Windows updates.
Computer needs updates
Make sure you have the latest updates available for your specific computer model (or components for home-built PCs). These are usually available for download on the support website for the maker of the PC (or component). Many USB updates are listed as "Intel chipset" or just "chipset" updates on PC manufacturer's support and download websites.
Software interference
Some software can interfere with iTunes, making it unable to write files to your iPod. Think about what software you have installed, and try disabling any add-ons that might be interfering with iTunes. Check your suspected software's documentation or contact the software maker if you need assistance with disabling the application. Out-of-date or incorrectly configured security software frequently causes this issue. See these steps for identifying and troubleshooting third-party security software.
Damaged files
If one of your music files or photos is damaged, iTunes may display one of these errors when transferring that file to the iPod. If you identify a file that is causing the error, try deleting that file and reimporting it from a backup file or from the original source. You may be able to repair files by repairing the disk (see the solutions in the next section).
Unregistered .dll files (Windows)
Malware or other software may cause an issue with the digital signing of Windows XP drivers. First try restoringthe iPod using the latest version of iTunes.. If you are unable to restore it or the symptom reappears, follow the steps in this document.
Damaged disk structure
These errors can also appear if the format of your computer's hard drive or your iPod disk is damaged.
To repair your computer's hard disk—Mac OS X users, read this article for instructions. Windows users, search the Help system in Windows for chkdsk to get more information on checking and repairing the disk structure.
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
Corrupt iPod photo Cache
If you're getting the error when transferring photos to an iPod photo, try deleting the iPod photo Cache and then starting the photo sync again.
Lost connection
Make sure that the connections from your computer to the iPod are snug and do not wiggle or come loose during transfers. For example, if you use the wrong size dock for your iPod, it can put strain on the connectors and cause a bad connection. See these articles for more information:
Learn about iPod Universal Dock
iPod Dock: Specifications
Conflict with third-party hardware
Third-party USB or FireWire devices may also interfere with iTunes' ability to communicate with your iPod. Remove all USB and FireWire devices except the keyboard and mouse before reconnecting your iPod to the computer.
Bad hardware
Hardware failure or non-compliant hardware can cause these errors. This could be an issue with iPod hardware or with the cable or dock you're using, but more often it's an issue with the USB or FireWire card or interface in your computer. Some USB and FireWire interfaces just don't work very well. If you isolate the issue to the USB or FireWire interface in your computer, you may want to try a different port, get the computer serviced, or replace the card or interface with a better one.
If you isolate the issue to an Apple-supplied cable or dock, or the iPod itself, you can get it serviced here.
Take care,
Sterling

Windows 8.1 error message

Similar Messages

Maybe you are looking for