Windows 8.1 Errow in all 3 of my computers

Firefox is not working correctly in windows 8.1 computers. It does not shut down completely and then does not open with this error message. Attaching.... [email protected].. The window displays the message firefox is already running but is not responding. To open a new window you must first close the existing firefox process or restart your system. This is very annoying it happens all the time.

The first solution seems to have taken care of it for good....

Similar Messages

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
any help would be greatly appreciated, thanks

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

I'm using Firefox version 3.6 on my '02 Mac G4. When I installed it, it worked fine, But then all of a sudden the "save" and "save as" windows stopped coming up at all when I selected "save" anywhere in Firefox. What happened and how do I fix it?

I downloaded and installed Firefox on my '02 Mac G4. It worked great. Now I have version 3.6. But my weird problem is one day when I ran it, the "save" and "save as" windows stopped popping up at all. I'd left click a picture and select "save as" and nothing would happen. I'd go to the menu and select "save" and still no window would pop up. It would just act as if nothing had been clicked. No loading icon or anything and no "save as" window. I've never been able to get it to work. The volunteer in the live support chat typed "That IS weird.." I tried his suggestion but it did nothing. I may have deleted the plist preferences file in the preferences library folder to get it started again after a freeze up threw it out of whack but I've never had this happen before.And i've tried doing that again to see if that would restore it. But the plist always regenerates itself and the "save as " window still never appears when I run Firefox. The "save" window works just fine in every other program on my Mac, but not in Firefox. Weird..

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

The Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes

since yesterday 08/10/2011 the Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes. When I click on the desktop short-cut the Firefox windows starts loading but before open is crushing.I have sent several messages to you but no answer and my Firfox is not working.

Which version of Firefox and which OS are you using?
There are other ways of opening safe mode given at http://kb.mozillazine.org/Safe_Mode - See if that helps.

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

Flash Player will not resize gaming window, or show screen at all.

I have been having issues with this for years, ever since I installed Internet Explorer 8 when it came out a few years ago. (Keep in mind that I have a 2nd computer, and a lap top, all with the newest software as well, and neither of those have this issue). I always have the latest software with Flash Player with this computer that I use the most, but it doesn't seem to make a world of difference. Half of the flash games I play on the internet won't fit inside of the browser window. As a crude quick image example of what I mean, see below. (If you would like me to insert an actually print screen of this occurring in my browser window, let me know). Imagine the ENTIRE grid is the flash player browser, which any working system is supposed to see. My flash image gets cut off in the equal sign areas, which makes game play almost completely impossible some times. Therefore, all I am ever able to see is the plus section (Which is actually larger than normal in flash windows since it can't resize). Not very helpful at all. This is the typical problem I have run into and endured for a steady 3 to 4 years. And it won't just happen with some newly created games, but with some older games as well (which older games are more understandable). But I don't have this problem with EVERY flash window I come upon, only about half that I've ever encountered.
+++++++++++++++++++
+++++++++++++++++++
+++++++++++++++++++
=====
=====
=====
===================
===================
=====
=====
My newest issue involves a gaming site I frequently visit. Crazy4jigsaws.com. They recently reformatted their site, and all I get is a blank white screen when I actually get to the interactive puzzle window, but I'm able to see the picture icons and tool bars just fine. (I already had the newest updated Flash Player when I first encountered the site). When I open the site on the laptop, it now shows the same symptoms of not being able to resize and fit the flash into the window.
I have looked for answers everywhere. I've uninstalled and reinstalled Flash Player multiple times. Fiddled with Java (just in case). Attempted compatibility views in my browser. Checked the internet options to make sure my activex is enabled or prompted, as well as anything else that may have prevented it. I've checked the bit rate of my Internet Browser (128). I've tried to install that "32 bit" link for the browser, but all I get is an error message. I've clicked on every single option in the View tab at the head of the browser. I'm always clicking the refresh button.
Does anyone have the same issues as me? I'd like to at least know that I'm not alone.

I have Windows XP.
In regards to my blank white page, the flash is now working again (Whether I needed to restart again or if it was a site thing).
And I'm not sure how to go about changing my display resolution with the browser, or know where to find it for that matter. Of course there's the one you can find in the control panel/display for the whole computer in general, but that doesn't do anything except make everything larger (Since I originally had it on the highest: 1024 x 768 pixels) and doesn't change the resize compatability for flash player at all.
Above is a screen shot of the jigsaw site I use (which is not the worst game resizing issue I've run into.) On the left side of the flash window, there are options to choose during game play, and the last option gets cut in half b/c the window won't resize correctly. And I haven't any idea if there are more options below it or not.
Below is one of the worst resizing issues I HAVE run into. I don't play farmville anymore since this problem, among it being boring, makes it literally impossible to play the game. I brought up the marketplace option since it's the most drastic. This is all of the flash game window, which would resize anything normally on my other computers, but the images get cut off along the sides with this one. I have tried playing this game on its home site, hoping that facebook was the problem, but it's the same issue there as well.

Is there a way to open a playlist in a second window in iTunes 11 - like all previous versions of iTunes could?

Is there a way to open a playlist in a second window in iTunes 11 - like all previous versions of iTunes could?
To build a playlist, I would open a newly created one in a separate window, then in the main widow I would roam through the full music collection adding songs to the playlist - by simple drag and drop - as I find them. But this doesn't work when I have to jump between full list view and playlist view in the same window - that kind of confuses the process. I need to be able to see the playlist I am building while I roam through the main list, using two windows to see both lists of songs at the same time. Is this no longer possible in iTunes 11?
Using iMac 10.7.5

Apple never officially comments on these posts, true, and I have no idea if they pay much attention to this very helpful user to user forum set-up here, but they do let you provide feedback at-( http://www.apple.com/feedback/ )-for any product concerns you may have, though they don't respond there either, which I think is understandable. I think they do consider feedback while developing updates and I expect they try to incorporate feedback concerns as they create updates and revisions. But it is probably exceedingly difficult to include all feedback concerns or please everyone all the time.
A long time ago I was complaining to them about how the full music library view would jump to show next song playing every time a new song started and that would take my view away from wherever I had scrolled to while the last song was playing. That was annoying and they eventually fixed that issue in iTunes 11.
I have sent apple my feedback concerns (more than once) about how it really helps to open separate windows to do playist creations and edit, revise, and manage playlists - and how that split window method is not easy to use (linked to in a previous post I made on this thread). The more people they get feedback from asking to be able to open multiple iTunes windows, then the more likely they will bring that feature back. So don't forget to provide feedback (go to feedback link provided herein).
Hopefully it won't take them years to return the multiple window capability in a future update.

Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

Whenever I launch a new Google window, Google immediately re-opens all other windows I happen to have open but minimized. I then have to either close or re-minimize each window, one at a time. What a pain!!

Just to address the last point: check your History menu to see whether you have the Restore Previous Session option and use that if you can. If that is grayed out or doesn't restore everything, check the Recently Closed Windows and Recently Closed Tabs lists for other pages.
The unwanted window may be generated by an add-on. Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
Here are some other things to check:
(1) user.js file that changes Firefox startup behavior and overrides your preferences. This article describes how to track that down and delete it if you have one: [[How to fix preferences that won't save]].
(2) Possible hijacked shortcut. Check the "target" of the desktop icon you use to start Firefox to see whether it lists the unwanted page. To do that:
right-click the icon > Properties > Shortcut tab
For 64-bit Windows 7, the Target should be no more and no less than this:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
(3) Possible undisclosed bundle items. If you have installed any free software recently, check your Windows Control Panel, Uninstall a program for surprises. If you click the "Installed on" column head to group by date, it is easier to spot bundled junk. Remove everything suspicious or unrecognized.
(4) Supplemental clean up scans. Our support article lists tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
Hopefully that cures it.

I have windows vista home premium and all other versions of iTunes worked on my laptop iTunes 10 won't work, I get a message saying I'm not connected to the Internet when I am. Why isn't iTunes recognizing my browser configuration?

I have windows vista home premium and all other iTunes worked on my laptop, I downloaded iTunes 10 and now the iTunes will not connect to the Internet. I use Mozilla firefox on my laptop and for some reason it keeps saying the connection timed out and I'm not connected to the Internet when I am. Why isn't iTunes recognizing my web configuration?

It probably has to do with your security and/or browser configuration.
When my laptop crashed last year and I had to get a new one, I dealt with the same thing. First, go to your control panel and select the security section. See if your firewalls are up or not. If they are, turn them off. If you have any software to speed up your browser, that can affect the connection as well. Go into that software and disble/turn it off. If this doesn't work, contact customer support. They have a few other tricks they had me try that worked, but I can't remember them now.

Itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software

itunes 12.1.1.4 not run cd rom on windows xp sp3. have removed all cd burning software.

Thanks Alex,
I performed all of the steps you suggested and iTunes v-12.1.1 installed correctly.
The problem is, that version of iTunes now does not recognize my HL-DTST DV-DRAM GMA-4082N, CD/DVD DRIVE.
When I insert a CD to rip into my iTunes library nothing happens.
If I click on the properties for that D-drive nothing shows using the Explore function.
If I open Microsoft Media Player v-11.0.5721.5262 I can see all of the tracks on the disk, and the player rips the songs to the Microsoft Media Player library which I can then play.
I then reinstalled VLC media player v-2.1.5, and was able to play cd's and watch DVD's. When I performed that install I again received the iTunes banner:
Earlier versions of iTunes worked just fine:
iTunes v-11.4 (32-bit) 10 September, 2014, (6 months ago), size: [106.11 MB], for Windows XP SP3 worked on this same Toshiba laptop.
The latest version: iTunes v-12.1.1 seems to want to be the only piece of software allowed on the 32 Bit XP system.
To me, it looks like Apple does not want any other applications running on this system. Not very thoughtful for customers that cannot afford to purchase more expensive computers when they are on a fixed income. I have been a long time user of Apple equipment when employed by Motorola, development engineering.in my younger years.
Is there any way to get the earlier versions of iTunes back on this laptop?
Thanks,
Jay

Windows 7 Driver fro HP All-in-One - 20-2210x

Hi everyone,
is there any way to download driver for Windows 7 x64 on HP All in one 20-2210x.
As on their website its only supported by Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=7308...
I dont want to use windows 8 at this time.
Many thanks

Hello @Oszh,
I understand that you are looking for Windows 7 64-bit drivers for your HP All-in-One - 20-2210x. Unfortunately, your computer at this time only has Windows 8.1 drivers. If you move down to Windows 7 you may lose some functionality as you will be stuck using the basic Windows 7 drivers if there are any for your computer.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work

hi guys,
My photoshop cs6 is not working in windows 7 64 bit while all other cs6 programs are working.. what should I do make it work?
My OS is windows 7
RAM - 8gb
HDD - 1 TB

are you getting any errors?
and secondly and I know this from experience, ( but on 32 bit ) is it loaded already as in sat in task manager, but not actually get at able, killing the processes cures it or a reboot of course

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

Spotlight does not open a finder window when i choose Show all in finder menu?

I have a significant number of files in my Macbook Air. A lot of them are research papers and medical literature.
About a month ago I updated the operating system from snow Leopard to mountain Lion and I had no reasons to complain except a smaller battery time.
Since then I installed every OS update.
After the last update, a few days ago, Spotlight does not open a finder window when i choose Show all in finder menu.
Spotlight continues to work properly if I write a name or expression in spotlight in a finder window but not in the upper left corner at the menu bar
As this been described yet?
Thank you in advance
Miguel Tavares

I had the same problem yesterday after performing a clean install of Mountain Lion (10.8.2) on my MacBook Pro.
I resolved the problem by booting from the Mountain Lion Recovery Partition and then running Disk Utilty (Repair) for the primary disk on which Mountain Lion is installed. It identified (and repaired) many permissions issues...
When I rebooted following the repair, Spotlight worked again properly -- including the "Show All in Finder" function.

Windows 8.1 Errow in all 3 of my computers

Similar Messages

Maybe you are looking for