Windows 8.1 evaluation install on XP PC

During the installation process of Windows 8.1 enterprise evaluation I format the disk drive so I think don't have XP anymore. And now the evaluation period expire. I need to know if I have to install a full version of Windows 8.1 or an upgrade for
my running evaluation copy?
Thanks.

You have to do a clean install as noted above.
Other than the fact that you'll be running Windows 8.1 after you've installed it, what problem would you think you could have? If Windows 8.1 Enterprise Eval runs on it, Windows 8.1 Pro (and the lesser editions) will run on it.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Similar Messages

"The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.

Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 8.1 frozen install

Hello, I am trying to install windows 8.1 enterprise evaluation but once I boot from the DVD to install I am stuck at a black screen with the blue windows logo.
Not even a loading indicator.
How can I fix this?

Hi,
As an alternative, you can try to create a bootable USB to install Windows 8.1 evaluation.
Just a reference for this:
http://blogs.msdn.com/b/devschool/archive/2013/09/03/preparing-for-windows-8-1-rtm-correct-link-to-make-usb-drive-bootable-and-load-the-iso.aspx
Alex Zhao
TechNet Community Support

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login new one they given the error. Pls help

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login they given the error. Pls help

This may help, it allows you to reset the application, it also may be worth clearing out the app store cache and temp files.
http://www.ryanragle.com/index.php?/site/comments/where-does-the-mac-app-store-d ownload-temp-files-to
To contact Apple use the feedback form, this is a user forum and I don't think they will respond here.
regards

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed. I get the opening window where it says installing plugins searching etc, after which PS opens in full screen. Just moments after that there's a fail warning, no code number, only

Hi, after installing Adobe CC I tried opening Adobe Photoshop. This failed.
I get the opening window where it says installing plugins searching etc, after which PS opens in full screen.
Just moments after that there's a failure warning, no code number, only the warning that PS failed to open and PS will close.
I tried downloading it for a second time, but this did'nt solve the problem.
Befor the CC version I used a one year student version of Adobe CS6.
What can I do?

Regarding the Flash Player problem, disable Hardware Acceleration to circumvent driver incompatibilities.
Regarding the Flash Pro installation problems, post in the Flash forums or http://forums.adobe.com/community/download_install_setup

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

On a Windows 7 computer I installed Firefox 9.0.1 and in my edit menu I have NO Preferences at the bottom, so there is no way to adjust any settings

On a Windows 7 computer I installed Firefox 9.0.1 and in my edit menu I have NO Preferences at the bottom, so there is no way to adjust any settings The edit menu opens up and I have undo, redo, cut, copy, paste,delete,select all, find....but NO Preferences at the bottom. This is a new laptop and nothing like skype is installed. The Firefox install is new today 1/6/12

Hi bruce,
What are you actually looking for? On Windows 7 your options will be under ''Tools > Options''. If you have the ''Firefox'' menu, you can hit ''Alt'' to temporarily enable the menu bar.
Your System details say Linux. Your say you are on Windows 7 though, correct?

I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

Yes, it's possible, but if your Windows system is on a Boot Camp partition then you have to first remove it. Then create however many partitions you want for the operating systems. You have OS X on one, so you need two more - one for Windows and one for Linux. You then install Windows and Linux separately to their respective partitions. Download rEFIt
Use it as the replacement bootloader so you can properly boot from each OS properly.

How to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

how to get reading list in my all my devices and computer (window 7). i have installed ios 6 on iphone and icloud control panel on both PC's (home and office) but i dont get updated reading list on all my devices.

Hi bluegrandpanash,
Thanks for visiting Apple Support Communities.
If you backed up your iPhone to iCloud before updating the software, first try the steps under "Restore from an iCloud backup" in this article to recover your data:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Best Regards,
Jeremy

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode. Display is at recommended 1920x1080. Is there a solution or is it a flaw in the program?

Don't have a direct answer. But did you install the updates. They might resolve the problem.

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver.

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting the iPhone with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver for Windows 8, iTunes and iPhone. MS does not care! This seems to be a general problem with Windows 8 that a number of drivers that used to work with Windows 7 now do not work, ie. iPhone to iTunes, HTC to HTCSync, Samsung to Kies etc. I need this connection to work in order to syncronize with Outlook and my iTunes library.

diesel vdub wrote:
Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
Like the fact that you just called most of us stupid there

Windows installer won't install v. 10.5 on laptop-any suggestions?

When windows installer runs download of v. 10.5 it fails to install due to program error. Is there a way to bypass the windows in staler
And install the update to iTunes? Running Windows XP on laptop.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

Windows 7 won't install any Audigy 2 ZS drivers

I did a clean install of Windows 7 and noticed right away, that the drivers for my Audigy 2 ZS didn't get installed. Here is the error I was given via device manager / properties for card:
The drivers for this device are not installed. (Code 28)
This operation requires an interacti've window station.
Drivers I've tried:
From Windows Update, dated October 4, 2008<
Creative's website, Driver version?2.8.00, dated July 3 2009
Creative's website, Beta driver version 2.8.00, dated Oct 2009
Creative's website, Vista driver 2.2.0002, dated March 6, 2007
danielk's audigy support pack 3.5
When I tried the Creative executables and danielk's support pack, I do not get any errors during any parts of the install(s).
Windows Updates says the install failed with unknown reason. When I attempt to "update driver" through device manager, it says it finds the driver but it gives me the same error as mentioned?above: This operation requires an interactive window station.
What else can I try? I've also done an "upgrade" install of Windows 7 on top of the clean install (out of desperation). At this point, I feel like reloading my XP imaged install,?so I can have working audio again.
So, please, if there is something I can try, then please help. Is there a way to do a "logged" install and send it to someone at Creative?
Thanks for your time

So, just to update everyone on my situation. I think my issue was caused by the migration tool, Windows Easy Transfer.
I formatted the partition the partition that Windows 7 was installed on, and did a fresh reinstall. Upon first boot of the new reinstall, the audio drivers were still not installed. I then immediately tried to "update drivers" via device manager and Windows installed the latest beta drivers from October , 2009 with no errors.
Is there any reason why the install won't install the drivers on its own? Did it not ship with Audigy 2 ZS drivers?

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

Windows 8.1 evaluation install on XP PC

Similar Messages

Maybe you are looking for