Windows 8.1 fails to boot

HP ENVY dv7t-7200 CTO Notebook PC - Unable to boot Win8. Error: "0xc0000098". "The boot configuration data file doesn't contain valid information for an operating system".
I had installed easyBCD 2.1.2 to dual boot win 7 and win 8.1

Hi Skkumbu,
I understand you are looking for your serial number for your HP ENVY dv7t-7200 Notebook. Here is a link that will help you find that out.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108
Please let me know if I can help further.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Windows 8.1 Fails to Boot Error 0xc000000f

My friend's notebook developed an error message on booting after less than a week's usage. The error reads:
Windows failed to start. A recent hardware or software change might be the cause. Ti fix the problem:
1. Insert Windows installation disk and restart your computer.
2. Choose your language settings, and then click "next".
3. Click Repair your computer"
If you do not have your system disk contact your administrator
File: \Boot\BCD
Sastus: 0xc000000f
Info: An error ocurred while attempting to read the boot configuration data.
My friend tells me that there were no external devices attached to the notebook and he was working on Excel at the time. Windows updates were being installed and the notebook run out of battery and turned off. On restarting the computer, he got the error above.
System information:
Processor: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
Current processor speed: 1700 MHz
Memory size: 8192MG RAM
BIOS date: 09/20/2014
Bios Revision: M74 Ver 01.05
I have the operating system DVD but when I select to boot from it, I get the saem error. I have tried the application and driver recovery DVD but that takes me straight into the restore to factory settings menu (I get no option to repair). I have tried running system diagnostics (Quick test). It starts with the battery and after about 10 seconds goes back to the previous menu. On looking at the logs, it says that the diagnistic was cancelled but certainly not by me. I managed to run individual tests on componenents such as the battery, processor and hard drive and they all passed.
How can we try to repair Windows rather than re-image?
This question was solved.
View Solution.

If you create a USB or Windows 8.1 installer you should be able to access the advanced recovery options that will allow you to use Safe Mode. If you are able to boot into Safe mode then using system recovery may very well be the answer to the BCD store issue that you are facing.
Follow the instructions at the following third party website to create a usb Windows 8.1 installer by using a generic Windows 8.1 key and use it to access the Windows environment.
https://www.winhelp.us/non-destructive-reinstall-of-windows-8-and-8-1.html#media
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows 8.1 fails to boot with error code 0x5c after moving physical drives

Hi,
i just rearranged hard drives on my desktop PC. I removed 4 RAID drives, installed a single drive and reattached all drives into different SATA connectors on the motherboard.
After this, my PC doesn't boot. IT always fails with errorcode 0x5c. My OS is on SSD drive, which was not part of the RAID drive so it should boot up just fine - except it doesn't.
I've tried safe mode, I've tried starting with driver signature enforcement disabled - but it never does boot up properly.
What else do i do apart from reinstalling the OS?

Hi,
This error 0x5c indicates that the HAL initialization failed. A hardware abstraction layer (HAL) is an abstraction layer, implemented in software, between the physical hardware of a computer and the software that runs on that computer.
It seems that the issue can be cause by interface compatible. Please enter BIOS and change SATA to AHCI to see what’s going on.
Also, I suggest you arrange your 4 RAID drives back to original SATA connector and connect the new single drive to another to check the results.
Hope this could be helpful.
Kate Li
TechNet Community Support

Random I/O errors (hdd) and failing to boot, Windows not affected

I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
Partition layout:
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs System Reserved D8B40750B4073094
├─sda2 ntfs 00EA107FEA107360
└─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
sr0
All three are primary partitions. Using ext4 yields the exact same result.
The problem is easy to reproduce:
Install Windows 7 to first half of HDD and Arch on the second half
At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
Windows seems to work just fine
Dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
[ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
[ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x9FB7C000 000040
[ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1668MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
[ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
[ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
[ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
[ 0.000000] On node 0 totalpages: 649053
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3337 pages used for memmap
[ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 5234680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146853a - 0xc162ec80 (1817 kB)
.text : 0xc1000000 - 0xc146853a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1896.408 MHz processor
[ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20140424
[ 0.009582] ACPI: All ACPI Tables successfully acquired
[ 0.015209] Security Framework initialized
[ 0.015217] Yama: becoming mindful.
[ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015472] Initializing cgroup subsys memory
[ 0.015491] Initializing cgroup subsys devices
[ 0.015498] Initializing cgroup subsys freezer
[ 0.015502] Initializing cgroup subsys net_cls
[ 0.015507] Initializing cgroup subsys blkio
[ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.015531] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015536] mce: CPU supports 7 MCE banks
[ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016347] ftrace: allocating 19356 entries in 38 pages
[ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
[ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.162668] ... version: 0
[ 0.162670] ... bit width: 48
[ 0.162671] ... generic registers: 6
[ 0.162672] ... value mask: 0000ffffffffffff
[ 0.162674] ... max period: 00007fffffffffff
[ 0.162675] ... fixed-purpose events: 0
[ 0.162676] ... event mask: 000000000000003f
[ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
[ 0.186179] x86: Booting SMP configuration:
[ 0.186182] .... node #0, CPUs: #1
[ 0.218942] Initializing CPU#1
[ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
[ 0.226179] #2
[ 0.258736] Initializing CPU#2
[ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
[ 0.266180] #3
[ 0.276300] Initializing CPU#3
[ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[ 0.279379] x86: Booted up 1 node, 4 CPUs
[ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
[ 0.280484] devtmpfs: initialized
[ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
[ 0.281973] pinctrl core: initialized pinctrl subsystem
[ 0.282053] RTC time: 22:28:26, date: 09/21/14
[ 0.282107] NET: Registered protocol family 16
[ 0.282225] cpuidle: using governor ladder
[ 0.282228] cpuidle: using governor menu
[ 0.282436] ACPI: bus type PCI registered
[ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.282558] PCI: Using MMCONFIG for extended config space
[ 0.282559] PCI: Using configuration type 1 for base access
[ 0.293370] ACPI: Added _OSI(Module Device)
[ 0.293374] ACPI: Added _OSI(Processor Device)
[ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.323484] ACPI: Interpreter enabled
[ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.323519] ACPI: (supports S0 S3 S4 S5)
[ 0.323522] ACPI: Using IOAPIC for interrupt routing
[ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
[ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.335971] PCI host bridge to bus 0000:00
[ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
[ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
[ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
[ 0.336266] pci 0000:00:01.0: supports D1 D2
[ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
[ 0.336417] pci 0000:00:01.1: supports D1 D2
[ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
[ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
[ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
[ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
[ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
[ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
[ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
[ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
[ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
[ 0.340177] pci 0000:00:12.2: supports D1 D2
[ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
[ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
[ 0.343004] pci 0000:00:13.2: supports D1 D2
[ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
[ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
[ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
[ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.344446] pci 0000:01:00.0: supports D1 D2
[ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
[ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
[ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
[ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
[ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.356487] pci 0000:03:00.0: supports D1 D2
[ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
[ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[ 0.363129] pci_bus 0000:00: on NUMA node 0
[ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.367456] vgaarb: loaded
[ 0.367458] vgaarb: bridge control possible 0000:00:01.0
[ 0.367505] PCI: Using ACPI for IRQ routing
[ 0.369255] PCI: pci_cache_line_size set to 64 bytes
[ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
[ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
[ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
[ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
[ 0.369516] NetLabel: Initializing
[ 0.369518] NetLabel: domain hash size = 128
[ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369532] NetLabel: unlabeled traffic allowed by default
[ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.371730] Switched to clocksource hpet
[ 0.378213] pnp: PnP ACPI init
[ 0.378231] ACPI: bus type PNP registered
[ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
[ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
[ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.378841] system 00:04: [io 0x04d6] has been reserved
[ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.378846] system 00:04: [io 0x077a] has been reserved
[ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
[ 0.378850] system 00:04: [io 0x0c14] has been reserved
[ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
[ 0.378855] system 00:04: [io 0x0c6c] has been reserved
[ 0.378857] system 00:04: [io 0x0c6f] has been reserved
[ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
[ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
[ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.382206] pnp: PnP ACPI: found 6 devices
[ 0.382211] ACPI: bus type PNP unregistered
[ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
[ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
[ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
[ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
[ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
[ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
[ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
[ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
[ 0.420484] NET: Registered protocol family 2
[ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.420733] TCP: reno registered
[ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.420798] NET: Registered protocol family 1
[ 0.420831] pci 0000:00:01.0: Boot video device
[ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.038759] PCI: CLS 64 bytes, default 64
[ 1.038818] Unpacking initramfs...
[ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
[ 1.112753] Simple Boot Flag at 0x44 set to 0x1
[ 1.113077] perf: AMD NB counters detected
[ 1.113122] LVT offset 0 assigned for vector 0x400
[ 1.113138] perf: AMD IBS detected (0x000000ff)
[ 1.113149] apm: BIOS not found.
[ 1.113200] Scanning for low memory corruption every 60 seconds
[ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.116388] zbud: loaded
[ 1.116669] VFS: Disk quotas dquot_6.5.2
[ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.116962] msgmni has been set to 1707
[ 1.117034] Key type big_key registered
[ 1.117325] bounce: pool size: 64 pages
[ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.117448] io scheduler noop registered
[ 1.117452] io scheduler deadline registered
[ 1.117524] io scheduler cfq registered (default)
[ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.118114] GHES: HEST is not enabled!
[ 1.118129] isapnp: Scanning for PnP cards...
[ 1.513691] isapnp: No Plug & Play device found
[ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.514746] rtc_cmos 00:01: RTC can wake from S4
[ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.515246] TCP: cubic registered
[ 1.515386] NET: Registered protocol family 10
[ 1.515657] NET: Registered protocol family 17
[ 1.516096] Using IPI No-Shortcut mode
[ 1.516269] registered taskstats version 1
[ 1.516866] Magic number: 14:856:502
[ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
[ 1.517032] PM: Hibernation image not present or could not be loaded.
[ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.517350] Write protecting the kernel text: 4516k
[ 1.517388] Write protecting the kernel read-only data: 1332k
[ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
[ 1.529660] systemd-udevd[57]: starting version 216
[ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
[ 1.568048] ACPI: bus type USB registered
[ 1.568103] usbcore: registered new interface driver usbfs
[ 1.568141] usbcore: registered new interface driver hub
[ 1.568537] SCSI subsystem initialized
[ 1.574578] usbcore: registered new device driver usb
[ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594746] ehci-pci: EHCI PCI platform driver
[ 1.594935] QUIRK: Enable AMD PLL fix
[ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.595002] ehci-pci 0000:00:12.2: debug port 1
[ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
[ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.595830] ohci-pci: OHCI PCI platform driver
[ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.602284] libata version 3.00 loaded.
[ 1.602306] hub 1-0:1.0: USB hub found
[ 1.602325] hub 1-0:1.0: 5 ports detected
[ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.602912] ehci-pci 0000:00:13.2: debug port 1
[ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
[ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.612308] hub 2-0:1.0: USB hub found
[ 1.612317] hub 2-0:1.0: 5 ports detected
[ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
[ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.613374] hub 3-0:1.0: USB hub found
[ 1.613388] hub 3-0:1.0: 2 ports detected
[ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.616754] hub 4-0:1.0: USB hub found
[ 1.616768] hub 4-0:1.0: 2 ports detected
[ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
[ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.673072] hub 5-0:1.0: USB hub found
[ 1.673098] hub 5-0:1.0: 5 ports detected
[ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
[ 1.729803] hub 6-0:1.0: USB hub found
[ 1.729831] hub 6-0:1.0: 5 ports detected
[ 1.730166] ahci 0000:00:11.0: version 3.0
[ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
[ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.731131] scsi0 : ahci
[ 1.731321] scsi1 : ahci
[ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
[ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
[ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
[ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
[ 2.218438] ata2.00: configured for UDMA/133
[ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.318651] ata1.00: configured for UDMA/133
[ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
[ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
[ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.338885] sda: sda1 sda2 sda3
[ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 2.438989] ata1.00: irq_stat 0x40000008
[ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
[ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 2.439127] ata1.00: status: { DRDY ERR }
[ 2.439166] ata1.00: error: { ICRC ABRT }
[ 2.439207] ata1: hard resetting link
[ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586950] usbcore: registered new interface driver usbhid
[ 2.586953] usbhid: USB HID core driver
[ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
[ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
[ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
[ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
[ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.039928] ata1.00: configured for UDMA/133
[ 3.039955] ata1: EH complete
[ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
[ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
[ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
[ 3.089128] ata1.00: irq_stat 0x40000008
[ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
[ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.089265] ata1.00: status: { DRDY ERR }
[ 3.089304] ata1.00: error: { ICRC ABRT }
[ 3.089346] ata1: hard resetting link
[ 3.115583] Switched to clocksource tsc
[ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.694602] ata1.00: configured for UDMA/133
[ 3.694621] ata1: EH complete
[ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
[ 3.809168] ata1.00: irq_stat 0x40000008
[ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
[ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 3.809305] ata1.00: status: { DRDY ERR }
[ 3.809343] ata1.00: error: { ICRC ABRT }
[ 3.809385] ata1: hard resetting link
[ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.404835] ata1.00: configured for UDMA/133
[ 4.404858] ata1: EH complete
[ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
[ 4.453760] ata1.00: irq_stat 0x40000008
[ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
[ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
[ 4.453894] ata1.00: status: { DRDY ERR }
[ 4.453932] ata1.00: error: { UNC }
[ 4.637639] ata1.00: configured for UDMA/133
[ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
[ 4.637691] sd 0:0:0:0: [sda]
[ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
[ 4.637695] sd 0:0:0:0: [sda]
[ 4.637697] Sense Key : 0x3 [current] [descriptor]
[ 4.637700] Descriptor sense data with sense descriptors (in hex):
[ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 4.637710] 00 00 09 b8
[ 4.637714] sd 0:0:0:0: [sda]
[ 4.637716] ASC=0x11 ASCQ=0x4
[ 4.637718] sd 0:0:0:0: [sda] CDB:
[ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
[ 4.637727] end_request: I/O error, dev sda, sector 2488
[ 4.637786] Buffer I/O error on device sda1, logical block 55
[ 4.637826] Buffer I/O error on device sda1, logical block 56
[ 4.637866] Buffer I/O error on device sda1, logical block 57
[ 4.637905] Buffer I/O error on device sda1, logical block 58
[ 4.637945] Buffer I/O error on device sda1, logical block 59
[ 4.637984] Buffer I/O error on device sda1, logical block 60
[ 4.638024] Buffer I/O error on device sda1, logical block 61
[ 4.638063] Buffer I/O error on device sda1, logical block 62
[ 4.638105] Buffer I/O error on device sda1, logical block 63
[ 4.638188] ata1: EH complete
[ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
[ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
[ 4.879364] ata1.00: irq_stat 0x40000008
[ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
[ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 4.879502] ata1.00: status: { DRDY ERR }
[ 4.879540] ata1.00: error: { ICRC ABRT }
[ 4.879583] ata1: hard resetting link
[ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5.469816] ata1.00: configured for UDMA/133
[ 5.469845] ata1: EH complete
[ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
[ 5.582859] ata1.00: irq_stat 0x40000008
[ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
[ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 5.582997] ata1.00: status: { DRDY ERR }
[ 5.583036] ata1.00: error: { ICRC ABRT }
[ 5.583078] ata1: hard resetting link
[ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.191135] ata1.00: configured for UDMA/133
[ 6.191166] ata1: EH complete
[ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
[ 6.256073] ata1.00: irq_stat 0x40000008
[ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
[ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.256212] ata1.00: status: { DRDY ERR }
[ 6.256250] ata1.00: error: { ICRC ABRT }
[ 6.256292] ata1: hard resetting link
[ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 6.845773] ata1.00: configured for UDMA/133
[ 6.845806] ata1: EH complete
[ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
[ 6.986223] ata1.00: irq_stat 0x40000008
[ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
[ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 6.986360] ata1.00: status: { DRDY ERR }
[ 6.986399] ata1.00: error: { ICRC ABRT }
[ 6.986440] ata1: hard resetting link
[ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7.578097] ata1.00: configured for UDMA/133
[ 7.578124] ata1: EH complete
[ 7.587216] random: nonblocking pool is initialized
[ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
[ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
[ 7.602850] ata1.00: irq_stat 0x40000008
[ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
[ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 7.602982] ata1.00: status: { DRDY ERR }
[ 7.603020] ata1.00: error: { ICRC ABRT }
[ 7.603061] ata1: hard resetting link
[ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.188490] ata1.00: configured for UDMA/133
[ 8.188517] ata1: EH complete
[ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
[ 8.216361] ata1.00: irq_stat 0x40000008
[ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
[ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.216500] ata1.00: status: { DRDY ERR }
[ 8.216539] ata1.00: error: { ICRC ABRT }
[ 8.216581] ata1: hard resetting link
[ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 8.809726] ata1.00: configured for UDMA/133
[ 8.809758] ata1: EH complete
[ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
[ 8.836295] ata1.00: irq_stat 0x40000008
[ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
[ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 8.836429] ata1.00: status: { DRDY ERR }
[ 8.836467] ata1.00: error: { ICRC ABRT }
[ 8.836507] ata1: hard resetting link
[ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 9.430994] ata1.00: configured for UDMA/133
[ 9.431018] ata1: EH complete
[ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 9.837542] ata1.00: irq_stat 0x40000008
[ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
[ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 9.837680] ata1.00: status: { DRDY ERR }
[ 9.837719] ata1.00: error: { ICRC ABRT }
[ 9.837761] ata1: hard resetting link
[ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 10.515900] ata1.00: configured for UDMA/133
[ 10.515972] sd 0:0:0:0: [sda]
[ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
[ 10.515978] sd 0:0:0:0: [sda]
[ 10.515979] Sense Key : 0xb [current] [descriptor]
[ 10.515983] Descriptor sense data with sense descriptors (in hex):
[ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 10.515992] 5e 89 08 20
[ 10.515997] sd 0:0:0:0: [sda]
[ 10.515998] ASC=0x47 ASCQ=0x0
[ 10.516001] sd 0:0:0:0: [sda] CDB:
[ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
[ 10.516010] end_request: I/O error, dev sda, sector 1586038816
[ 10.516148] ata1: EH complete
[ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
[ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
[ 10.529786] ata1.00: irq_stat 0x40000008
[ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
[ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 10.529924] ata1.00: status: { DRDY ERR }
[ 10.529962] ata1.00: error: { ICRC ABRT }
[ 10.530004] ata1: hard resetting link
[ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.139673] ata1.00: configured for UDMA/100
[ 11.139723] sd 0:0:0:0: [sda]
[ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
[ 11.139728] sd 0:0:0:0: [sda]
[ 11.139730] Sense Key : 0xb [current] [descriptor]
[ 11.139733] Descriptor sense data with sense descriptors (in hex):
[ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.139743] 5e 89 08 d4
[ 11.139747] sd 0:0:0:0: [sda]
[ 11.139749] ASC=0x47 ASCQ=0x0
[ 11.139751] sd 0:0:0:0: [sda] CDB:
[ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
[ 11.139761] end_request: I/O error, dev sda, sector 1586038992
[ 11.139889] ata1: EH complete
[ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
[ 11.153169] ata1.00: irq_stat 0x40000008
[ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
[ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.153306] ata1.00: status: { DRDY ERR }
[ 11.153345] ata1.00: error: { ICRC ABRT }
[ 11.153386] ata1: hard resetting link
[ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 11.749884] ata1.00: configured for UDMA/100
[ 11.749918] sd 0:0:0:0: [sda]
[ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
[ 11.749923] sd 0:0:0:0: [sda]
[ 11.749925] Sense Key : 0xb [current] [descriptor]
[ 11.749928] Descriptor sense data with sense descriptors (in hex):
[ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 11.749938] 5e 89 08 28
[ 11.749942] sd 0:0:0:0: [sda]
[ 11.749944] ASC=0x47 ASCQ=0x0
[ 11.749946] sd 0:0:0:0: [sda] CDB:
[ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
[ 11.749956] end_request: I/O error, dev sda, sector 1586038824
[ 11.750093] ata1: EH complete
[ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 11.763206] ata1.00: irq_stat 0x40000008
[ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
[ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 11.763343] ata1.00: status: { DRDY ERR }
[ 11.763382] ata1.00: error: { ICRC ABRT }
[ 11.763424] ata1: hard resetting link
[ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.360321] ata1.00: configured for UDMA/100
[ 12.360370] sd 0:0:0:0: [sda]
[ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
[ 12.360375] sd 0:0:0:0: [sda]
[ 12.360377] Sense Key : 0xb [current] [descriptor]
[ 12.360380] Descriptor sense data with sense descriptors (in hex):
[ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.360390] 5e 89 08 c8
[ 12.360394] sd 0:0:0:0: [sda]
[ 12.360395] ASC=0x47 ASCQ=0x0
[ 12.360398] sd 0:0:0:0: [sda] CDB:
[ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
[ 12.360407] end_request: I/O error, dev sda, sector 1586038984
[ 12.360543] ata1: EH complete
[ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.370005] ata1.00: irq_stat 0x40000008
[ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
[ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.370143] ata1.00: status: { DRDY ERR }
[ 12.370182] ata1.00: error: { ICRC ABRT }
[ 12.370224] ata1: hard resetting link
[ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.959379] ata1.00: configured for UDMA/100
[ 12.959426] sd 0:0:0:0: [sda]
[ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
[ 12.959432] sd 0:0:0:0: [sda]
[ 12.959433] Sense Key : 0xb [current] [descriptor]
[ 12.959437] Descriptor sense data with sense descriptors (in hex):
[ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 12.959447] 63 89 08 3a
[ 12.959462] sd 0:0:0:0: [sda]
[ 12.959464] ASC=0x47 ASCQ=0x0
[ 12.959466] sd 0:0:0:0: [sda] CDB:
[ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
[ 12.959476] end_request: I/O error, dev sda, sector 1669924920
[ 12.959616] ata1: EH complete
[ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
[ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
[ 12.973247] ata1.00: irq_stat 0x40000008
[ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
[ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 12.973384] ata1.00: status: { DRDY ERR }
[ 12.973423] ata1.00: error: { ICRC ABRT }
[ 12.973464] ata1: hard resetting link
[ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.569691] ata1.00: configured for UDMA/33
[ 13.569750] sd 0:0:0:0: [sda]
[ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
[ 13.569755] sd 0:0:0:0: [sda]
[ 13.569757] Sense Key : 0xb [current] [descriptor]
[ 13.569761] Descriptor sense data with sense descriptors (in hex):
[ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 13.569771] 5e 89 08 c0
[ 13.569775] sd 0:0:0:0: [sda]
[ 13.569777] ASC=0x47 ASCQ=0x0
[ 13.569779] sd 0:0:0:0: [sda] CDB:
[ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
[ 13.569789] end_request: I/O error, dev sda, sector 1586038976
[ 13.569933] ata1: EH complete
[ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
[ 13.583360] ata1.00: irq_stat 0x40000008
[ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
[ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 13.585478] ata1.00: status: { DRDY ERR }
[ 13.585516] ata1.00: error: { ICRC ABRT }
[ 13.585558] ata1: hard resetting link
[ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.180020] ata1.00: configured for UDMA/33
[ 14.180069] sd 0:0:0:0: [sda]
[ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
[ 14.180074] sd 0:0:0:0: [sda]
[ 14.180076] Sense Key : 0xb [current] [descriptor]
[ 14.180079] Descriptor sense data with sense descriptors (in hex):
[ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.180089] 63 89 08 30
[ 14.180094] sd 0:0:0:0: [sda]
[ 14.180095] ASC=0x47 ASCQ=0x0
[ 14.180098] sd 0:0:0:0: [sda] CDB:
[ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
[ 14.180108] end_request: I/O error, dev sda, sector 1669924912
[ 14.180245] ata1: EH complete
[ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
[ 14.190153] ata1.00: irq_stat 0x40000008
[ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
[ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.190290] ata1.00: status: { DRDY ERR }
[ 14.190328] ata1.00: error: { ICRC ABRT }
[ 14.190371] ata1: hard resetting link
[ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 14.779168] ata1.00: configured for UDMA/33
[ 14.779214] sd 0:0:0:0: [sda]
[ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
[ 14.779218] sd 0:0:0:0: [sda]
[ 14.779220] Sense Key : 0xb [current] [descriptor]
[ 14.779223] Descriptor sense data with sense descriptors (in hex):
[ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 14.779233] 63 89 08 80
[ 14.779237] sd 0:0:0:0: [sda]
[ 14.779239] ASC=0x47 ASCQ=0x0
[ 14.779241] sd 0:0:0:0: [sda] CDB:
[ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
[ 14.779251] end_request: I/O error, dev sda, sector 1669924976
[ 14.779391] ata1: EH complete
[ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
[ 14.793513] ata1.00: irq_stat 0x40000008
[ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
[ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 14.793651] ata1.00: status: { DRDY ERR }
[ 14.793690] ata1.00: error: { ICRC ABRT }
[ 14.793733] ata1: hard resetting link
[ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.378218] ata1.00: configured for UDMA/33
[ 15.378240] sd 0:0:0:0: [sda]
[ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
[ 15.378245] sd 0:0:0:0: [sda]
[ 15.378247] Sense Key : 0xb [current] [descriptor]
[ 15.378250] Descriptor sense data with sense descriptors (in hex):
[ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 15.378260] 63 89 08 28
[ 15.378264] sd 0:0:0:0: [sda]
[ 15.378266] ASC=0x47 ASCQ=0x0
[ 15.378268] sd 0:0:0:0: [sda] CDB:
[ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
[ 15.378277] end_request: I/O error, dev sda, sector 1669924904
[ 15.378427] ata1: EH complete
[ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
[ 15.390148] ata1.00: irq_stat 0x40000008
[ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
[ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.390285] ata1.00: status: { DRDY ERR }
[ 15.390324] ata1.00: error: { ICRC ABRT }
[ 15.390366] ata1: hard resetting link
[ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.977410] ata1.00: configured for UDMA/33
[ 15.977500] ata1: EH complete
[ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
[ 15.986916] ata1.00: irq_stat 0x40000008
[ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
[ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 15.987054] ata1.00: status: { DRDY ERR }
[ 15.987093] ata1.00: error: { ICRC ABRT }
[ 15.987135] ata1: hard resetting link
[ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 16.576437] ata1.00: configured for UDMA/33
[ 16.576509] sd 0:0:0:0: [sda]
[ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
[ 16.576514] sd 0:0:0:0: [sda]
[ 16.576516] Sense Key : 0xb [current] [descriptor]
[ 16.576519] Descriptor sense data with sense descriptors (in hex):
[ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 16.576529] 63 89 08 20
[ 16.576533] sd 0:0:0:0: [sda]
[ 16.576534] ASC=0x47 ASCQ=0x0
[ 16.576537] sd 0:0:0:0: [sda] CDB:
[ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
[ 16.576546] end_request: I/O error, dev sda, sector 1669924896
[ 16.576642] ata1: EH complete
[ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
[ 16.586847] ata1.00: irq_stat 0x40000008
[ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
[ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
[ 16.586980] ata1.00: status: { DRDY ERR }
[ 16.587018] ata1.00: error: { ICRC ABRT }
[ 16.587058] ata1: hard resetting link
[ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.175907] ata1.00: configured for UDMA/33
[ 17.175963] sd 0:0:0:0: [sda]
[ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
[ 17.175968] sd 0:0:0:0: [sda]
[ 17.175970] Sense Key : 0xb [current] [descriptor]
[ 17.175973] Descriptor sense data with sense descriptors (in hex):
[ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 17.175983] 5e 89 08 54
[ 17.175987] sd

I have only Arch installed, 64 bit, UEFI boot.
The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
Sep 24 06:13:59 kernel: ata6: hard resetting link
Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:13:59 kernel: 00 00 0e 87
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
Sep 24 06:13:59 kernel: ata6: EH complete
Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
Sep 24 06:14:30 kernel: ata6: hard resetting link
Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Sep 24 06:14:30 kernel: 00 00 10 08
Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
and so on... It somehow booted, but now journalctl says:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
while the Error hasn't occured yet.
I think I wil take the emergency procedure, and start backing up my files and system ...
I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

New Windows server 2003 Hyper-V guest fails to boot

Hello,
I'm currently doing some virtualization experiments on my new server hardware. The host hardware is:
IBM x3650 M4
x2 Xeon E5-2609
32GB RAM
x2 480 GB SSDs
Server OS: Windows server 2012
I'd like to test some legacy app virtualization. I've configured a VM and have installed Windows server 2003. The install is done via DVD. The issue at hand is that after the initial installation, the server fails to boot. The VM goes into a reboot loop
and so far the only error logging I'm able to find is in the hosts event log.
Log Name: Microsoft-Windows-Hyper-V-Worker-Admin
Source: Microsoft-Windows-Hyper-V-Worker
Date: 7/8/2014 2:14:48 PM
Event ID: 18560
Task Category: None
Level: Critical
Keywords:
User: NT VIRTUAL MACHINE\A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D
Computer: CCSTS1.cnet2k.cornerstonecredit.net
Description:
'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault. If the problem persists, contact Product Support. (Virtual machine ID A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
<EventID>18560</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-07-08T21:14:48.544007000Z" />
<EventRecordID>159</EventRecordID>
<Correlation />
<Execution ProcessID="1512" ThreadID="3536" />
<Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
<Computer>CCSTS1.cnet2k.cornerstonecredit.net</Computer>
<Security UserID="S-1-5-83-1-2698121124-1264104059-3615998341-769460811" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>LegacyTS</VmName>
<VmId>A0D20FA4-B27B-4B58-85C1-87D74B0ADD2D</VmId>
<Rax>0x0</Rax>
<Rbx>0x0</Rbx>
<Rcx>0x0</Rcx>
<Rdx>0x0</Rdx>
<Rsp>0x804de00c</Rsp>
<Rbp>0x0</Rbp>
<Rsi>0x0</Rsi>
<Rdi>0x0</Rdi>
<R8>0x0</R8>
<R9>0x0</R9>
<R10>0x0</R10>
<R11>0x0</R11>
<R12>0x0</R12>
<R13>0x0</R13>
<R14>0x0</R14>
<R15>0x0</R15>
<Rip>0x80547c7c</Rip>
<Rflags>0x10046</Rflags>
<FpControlStatus>7F030000000000000000000000000000</FpControlStatus>
<XmmControlStatus>0000000000000000801F0000FFFF0000</XmmControlStatus>
<Cr0>0x8001003d</Cr0>
<Cr2>0x804ddffc</Cr2>
<Cr3>0xa02000</Cr3>
<Cr4>0x20</Cr4>
<Cr8>0xf</Cr8>
<Xfem>0x1</Xfem>
<Dr0>0x0</Dr0>
<Dr1>0x0</Dr1>
<Dr2>0x0</Dr2>
<Dr3>0x0</Dr3>
<Dr6>0xffff0ff0</Dr6>
<Dr7>0x400</Dr7>
<Es>0000000000000000FFFFFFFF2300F3C0</Es>
<Cs>0000000000000000FFFFFFFF08009BC0</Cs>
<Ss>0000000000000000FFFFFFFF100093C0</Ss>
<Ds>0000000000000000FFFFFFFF2300F3C0</Ds>
<Fs>00F0DFFF00000000FF1F0000300093C0</Fs>
<Gs>0000000000000000FFFFFFFF00000000</Gs>
<Ldtr>00000000000000000000000000000000</Ldtr>
<Tr>90685580000000006800000050008B00</Tr>
<Idtr>000000000000FF0700F4038000000000</Idtr>
<Gdtr>000000000000FF0300F0038000000000</Gdtr>
<Tsc>0x148e4294</Tsc>
<ApicBase>0xfee00900</ApicBase>
<SysenterCs>0x0</SysenterCs>
<SysenterEip>0x0</SysenterEip>
<SysenterEsp>0x0</SysenterEsp>
</VmlEventLog>
</UserData>
</Event>
My VM config
<?xml version="1.0" encoding="UTF-16" standalone="yes"?>
<configuration>
<_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<ChannelInstanceGuid type="string">{E4E9CD0E-4BBF-4C1B-B655-715781690655}</ChannelInstanceGuid>
</_24984ed0-bdad-4b90-82b2-5d59f874e91e_>
<_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<address type="string">5353,00000000,00</address>
<version type="integer">1</version>
</_7d80d3db-61ee-4879-8879-5609f1100ad0_>
<_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<controller0>
<drive0>
<pathname type="string">E:\Hyper-V\VHD\LegacyTS.vhdx</pathname>
<pool_id type="string"></pool_id>
<type type="string">VHD</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller0>
<controller1>
<drive0>
<pathname type="string">SCSI\CDROM&VEN_IBM_SATA&PROD_DEVICE_81Y3681\4&1864BF9E&0&010000</pathname>
<pool_id type="string"></pool_id>
<type type="string">ISO</type>
</drive0>
<drive1>
<pathname type="string"></pathname>
<type type="string">NONE</type>
</drive1>
</controller1>
<version type="integer">5</version>
</_83f8638b-8dca-4152-9eda-2ca8b33039b4_>
<_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<port0>
<connection type="string"></connection>
</port0>
<port1>
<connection type="string"></connection>
</port1>
<version type="integer">2</version>
</_8e3a359f-559a-4b6a-98a9-1690a6100ed7_>
<_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<controller0>
<drive0>
<pathname type="string"></pathname>
<type type="string">VFD</type>
</drive0>
</controller0>
<version type="integer">1</version>
</_8f0d2762-0b00-4e04-af4f-19010527cb93_>
<_a80e9c62-750a-4a6b-9548-d46677e806be_>
<ChannelInstanceGuid type="string">{23c9c636-93de-4aec-9bef-220766177a24}</ChannelInstanceGuid>
<Connection>
<AltPortName type="string">Dynamic Ethernet Switch Port</AltPortName>
<AltSwitchName type="string">Intel(R) I350 Gigabit Network Connection - Virtual Switch</AltSwitchName>
<AuthorizationScope type="string"></AuthorizationScope>
<ChimneyOffloadWeight type="integer">0</ChimneyOffloadWeight>
<Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<DisplayName type="string"></DisplayName>
<Flags type="integer">0</Flags>
<Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Data type="bytes">AAIAAGQAAAAAAAAAAQAAAAAAAAA=
</Data>
<Version type="integer">256</Version>
</Setting_97274751-A1EC-4DC2-941D-B7F9A1AED814>
<Settings>
<Id type="string">97274751-A1EC-4DC2-941D-B7F9A1AED814</Id>
</Settings>
</Feature_C885BFD1-ABB7-418F-8163-9F379C9F7166>
<Features>
<Id type="string">C885BFD1-ABB7-418F-8163-9F379C9F7166</Id>
</Features>
<HostResources>
<HostResource type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</HostResource>
</HostResources>
<PoolId type="string"></PoolId>
<PreventIPSpoofing type="bool">False</PreventIPSpoofing>
<TestReplicaPoolId type="string"></TestReplicaPoolId>
<TestReplicaSwitchName type="string"></TestReplicaSwitchName>
</Connection>
<FriendlyName type="string">Network Adapter</FriendlyName>
<IsConnected type="bool">True</IsConnected>
<MacAddress type="string">00-15-5D-01-18-02</MacAddress>
<MacAddressIsStatic type="bool">False</MacAddressIsStatic>
<PortName type="string">E7F02418-A1EB-4FF9-84F8-BF461B2D00C6</PortName>
<SwitchName type="string">8758EB1A-9687-41FC-9319-AE867D46BA5C</SwitchName>
<VpciInstanceGuid type="string">{E9444985-111B-404A-82FE-48608A397676}</VpciInstanceGuid>
</_a80e9c62-750a-4a6b-9548-d46677e806be_>
<_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<base_board>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</base_board>
<bios_guid type="string">{B54BE7B5-05A4-4C4A-A2BD-D63272C7CCCD}</bios_guid>
<bios_serial_number type="string">9595-3600-2199-6834-7686-3927-30</bios_serial_number>
<boot>
<device0 type="string">Optical</device0>
<device1 type="string">HardDrive</device1>
<device2 type="string">Network</device2>
<device3 type="string">Floppy</device3>
</boot>
<chassis>
<asset_tag type="string">8437-8592-0329-9603-9215-1886-12</asset_tag>
<serial_number type="string">9595-3600-2199-6834-7686-3927-30</serial_number>
</chassis>
<num_lock type="bool">False</num_lock>
<version type="integer">2</version>
</_ac6b8dc1-3257-4a70-b1b2-a9c9215659ad_>
<_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<version type="integer">0</version>
</_db8b9818-b4bb-4725-b99d-b4612716b6b4_>
<global_settings>
<devices>
<allow_reduced_fc_redundancy type="bool">False</allow_reduced_fc_redundancy>
<generation_id type="string">883d11122d9b7b2c521be0c045ef3760</generation_id>
<storage_allow_full_scsi_command_set type="bool">False</storage_allow_full_scsi_command_set>
</devices>
<disk_merge_pending type="bool">False</disk_merge_pending>
<metrics>
<devicetype>
<deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">B637F347-6A0E-4DEC-AF52-BD70CB80A21D</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">3F6F1051-C8FC-47EF-9821-C07240848748;0</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">B637F346-6A0E-4DEC-AF52-BD70CB80A21D</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">394DCE66-458F-4895-AE56-41D7C9602A49</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">FF85EA46-9933-4436-BE5D-C96827399966</typecode>
<value type="integer">0</value>
</metric>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">4764334E-E001-4176-82EE-5594EC9B530E</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">04BDF59E-580D-4441-8828-FFFE44472D2D</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">4764334D-E001-4176-82EE-5594EC9B530E</guid>
</devicetype>
<devicetype>
<deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
<metric>
<enabled type="bool">False</enabled>
<lastcomputedtime type="integer">0</lastcomputedtime>
<peaktime type="integer">0</peaktime>
<poolid type="string"></poolid>
<resourcetypeid type="string">70BB60D2-A9D3-46AA-B654-3DE53004B4F8</resourcetypeid>
<starttime type="integer">0</starttime>
<typecode type="string">AD29978B-AAB6-44AE-81CD-0609BF929F18;0\0\L</typecode>
<value type="integer">0</value>
</metric>
</deviceinstance>
<guid type="string">83F8638B-8DCA-4152-9EDA-2CA8B33039B4</guid>
</devicetype>
</metrics>
<owner>
<sid type="string">S-1-5-21-1940488291-1951097212-1584025624-1392</sid>
</owner>
<power>
<host_shutdown>
<action type="integer">1</action>
</host_shutdown>
<host_startup>
<action type="integer">1</action>
</host_startup>
</power>
<snapshots>
<list>
<size type="integer">0</size>
</list>
</snapshots>
<unexpected_termination>
<action type="integer">1</action>
</unexpected_termination>
<vhd_path_acled type="bool">True</vhd_path_acled>
</global_settings>
<manifest>
<size type="integer">11</size>
<vdev001>
<device type="string">58f75a6d-d949-4320-99e1-a2a2576d581c</device>
<flags type="integer">1</flags>
<instance type="string">58F75A6D-D949-4320-99E1-A2A2576D581C</instance>
<name type="string">Microsoft Synthetic Mouse</name>
</vdev001>
<vdev002>
<device type="string">197f74e3-b84b-46de-8ae6-82f1cd181cdc</device>
<flags type="integer">1</flags>
<instance type="string">197F74E3-B84B-46DE-8AE6-82F1CD181CDC</instance>
<name type="string">Microsoft Synthetic Keyboard</name>
</vdev002>
<vdev003>
<device type="string">f3cf6965-e8d3-44a9-9b7d-a04245ea7525</device>
<flags type="integer">1</flags>
<instance type="string">F3CF6965-E8D3-44A9-9B7D-A04245EA7525</instance>
<name type="string">Microsoft Synthetic Video</name>
</vdev003>
<vdev004>
<device type="string">84eaae65-2f2e-45f5-9bb5-0e857dc8eb47</device>
<flags type="integer">1</flags>
<instance type="string">84EAAE65-2F2E-45F5-9BB5-0E857DC8EB47</instance>
<name type="string">Microsoft Heartbeat Component</name>
</vdev004>
<vdev005>
<device type="string">2a34b1c2-fd73-4043-8a5b-dd2159bc743f</device>
<flags type="integer">1</flags>
<instance type="string">2A34B1C2-FD73-4043-8A5B-DD2159BC743F</instance>
<name type="string">Microsoft Key-Value Pair Exchange Component</name>
</vdev005>
<vdev006>
<device type="string">9f8233ac-be49-4c79-8ee3-e7e1985b2077</device>
<flags type="integer">1</flags>
<instance type="string">9F8233AC-BE49-4C79-8EE3-E7E1985B2077</instance>
<name type="string">Microsoft Shutdown Component</name>
</vdev006>
<vdev007>
<device type="string">2497f4de-e9fa-4204-80e4-4b75c46419c0</device>
<flags type="integer">1</flags>
<instance type="string">2497F4DE-E9FA-4204-80E4-4B75C46419C0</instance>
<name type="string">Microsoft Time Synchronization Component</name>
</vdev007>
<vdev008>
<device type="string">5ced1297-4598-4915-a5fc-ad21bb4d02a4</device>
<flags type="integer">1</flags>
<instance type="string">5CED1297-4598-4915-A5FC-AD21BB4D02A4</instance>
<name type="string">Microsoft VSS Component</name>
</vdev008>
<vdev009>
<device type="string">6c5addb9-a11a-4e8e-84cb-e6208201db63</device>
<flags type="integer">1</flags>
<instance type="string">6C5ADDB9-A11A-4E8E-84CB-E6208201DB63</instance>
<name type="string">Microsoft RDV Component</name>
</vdev009>
<vdev010>
<device type="string">2fc216b0-d2e2-4967-9b6d-b8a5c9ca2778</device>
<flags type="integer">1</flags>
<instance type="string">A80E9C62-750A-4A6B-9548-D46677E806BE</instance>
<name type="string">Synthetic Ethernet Port</name>
</vdev010>
<vdev011>
<device type="string">d422512d-2bf2-4752-809d-7b82b5fcb1b4</device>
<flags type="integer">1</flags>
<instance type="string">24984ED0-BDAD-4B90-82B2-5D59F874E91E</instance>
<name type="string">Synthetic SCSI Controller</name>
</vdev011>
<version type="integer">260</version>
</manifest>
<properties>
<global_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</global_id>
<highly_available type="bool">False</highly_available>
<last_powered_off_time type="integer">130493284127496105</last_powered_off_time>
<last_powered_on_time type="integer">130493284065876653</last_powered_on_time>
<last_state_change_time type="integer">130493284127496105</last_state_change_time>
<name type="string">LegacyTS</name>
<notes type="string"></notes>
<type_id type="string">Virtual Machines</type_id>
<version type="integer">1024</version>
</properties>
<settings>
<global>
<logical_id type="string">B37E54CD-FFBB-44DA-8B7C-322B922EAD72</logical_id>
</global>
<memory>
<bank>
<dynamic_memory_enabled type="bool">True</dynamic_memory_enabled>
<limit type="integer">1048576</limit>
<priority type="integer">5000</priority>
<reservation type="integer">512</reservation>
<size type="integer">4096</size>
<target_memory_buffer type="integer">20</target_memory_buffer>
</bank>
<vnuma>
<max_size_per_node type="integer">14770</max_size_per_node>
</vnuma>
</memory>
<processors>
<count type="integer">1</count>
<features>
<limit type="bool">False</limit>
</features>
<limit type="integer">100000</limit>
<limit_cpuid type="bool">False</limit_cpuid>
<reservation type="integer">0</reservation>
<vnuma>
<count_per_node>
<max type="integer">4</max>
</count_per_node>
<node_per_socket>
<max type="integer">1</max>
</node_per_socket>
</vnuma>
<weight type="integer">100</weight>
</processors>
<stopped_at_host_shutdown type="bool">False</stopped_at_host_shutdown>
<vnuma>
<enabled type="bool">False</enabled>
</vnuma>
</settings>
</configuration>
If its relevant, the host is not yet activated license wise. I downloaded the demo version so I could test my idea before making a purchase to go ahead with full implementation.
As it stands right now I'm not sure how to troubleshoot this. Many searches on google have not turned up any helpful info. Does anyone have any ideas?
Thanks,
D

Hi ,
First , please refer to the supported guest OS of windows 2012 hyper-v :
http://technet.microsoft.com/library/hh831531.aspx
2003/R2 should be with sp2 and max 2 virtual processors .
"'LegacyTS' was reset because an unrecoverable error occurred on a virtual processor that caused a triple fault."
If the issue is not due to the above items , you can try to check the "CPU compatibility " in that VM settings for troubleshooting:
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows server 2008 R2 Failed to boot

Hello,
i need help on the following issue:
i have a win 2008 R2 server failing to boot with a blue screen containing:
stop: c000021a {fatal system error}
the verification of a knownDLL failed. system process terminated unexpectedly with a status of 0x0000020 (0x005b0110 0x0000000000).
the system has been shutdown.

Hi,
As far as I know, the STOP 0xC000021A error occurs when either Winlogon.exe or Csrss.exe fails. When the Windows NT kernel detects that either of these processes
has stopped, it stops the system and raises the STOP 0xC000021A error. This error may have several causes. Among them are the following:
Mismatched system files have been installed.
A Service Pack installation has failed.
A backup program that is used to restore a hard disk did not correctly restore files that may have been in use.
An incompatible third-party program has been installed.
Regarding this error and how to troubleshoot it, the following article can be referred to as reference.
How to troubleshoot a "STOP 0xC000021A" error
http://support.microsoft.com/kb/156669/en
Best regards,
Frank Shen

Working windows install on ssd but fails to boot when old hdd is removed

I bought a Samsung 840 ssd for my Thinkpad T510 to use as my primary hdd and an Ultrabay Sata adapter to mount an additional hdd. I clean installed Windows 7 64 bit on the ssd . Previously I was using 32 bit Windows but I because I also upgraded to 8 gb ram I needed to switch to 64 bit. I used the Windows USB DVD tool to create a bootable USB to install Windows from.
Everything went fine. Because I have two hdds both running windows, when I boot the computer it prompts me to pick which Windows 7 to run. Both run fine. However, and this is the problem I need help with, when I remove the original hdd leaving only the Samsung ssd the computer won't boot - it says no valid operating system.
I tried updating the BIOS but that didn't help.
Any ideas?
Thanks!!*
*Update: I used EasyBCD to copy the boot file to the ssd. Now I am able to boot fine on the ssd with the old hdd removed. So it would seem as if not having the boot file on the ssd was the problem. Still, when I boot up, I'm prompted to pick between booting Windows 7 (new ssd) and Windows 7 (old hdd thats no longer connected). Obviously if I pick the latter it fails to boot. If I pick the former it works fine (problem solved!), but I'd like to be able to skip this prompt when I turn on my comp. Any ideas?
Also, I'm curious why the boot file wasn't on the ssd already once I installed windows 7 on that drive. Is it because the old hdd was still physically connected while windows was installing? If re-installing windows on the ssd without any other drives present would likely make all these problems go away I'm inclined to just do that, but does anyone know for a fact why this would be necessary?
Thanks!!

I have had similar issues in the past, but it was nothing to do with the T510. It is solely a windows issue. It is happening because , with both the drives installed the system can "see" the modified boot file. When you take out the ultrabay hard drive the system can no longer see the boot file, hence no valis operating system.
For me to fix it in the past, was a bit of mucking around. First off see if you can download "vistaboot" pro v3.3. With that you should be able to copy the bootfile to the SSD. If you can't do that you'll probably have to use a Windows install disk, booting from the DVD drive, wait till it loads up, select keyboard info, and at the next screen choose "start up repair" .
Sad to say, even that is not a guaranteed fix; it failed for me last Friday and I had to do a fresh install. If you don't have a Windows DVD, google for X17-59465 or GSP1RMCULXFRER_EN_DVD. They are the latest version of Windows 7 x64 Ultimate.You should find valid, and legal, download links at digitalriver, the official microsoft site and they most likely be posted somewhere on the mydigitallife forums.
Have fun !!

Windows XP Fails to Boot

Hello all,
Just bought , K7N2 Delta ,
Promptly installed everything .
The problem I have is Windows XP fails to boot.
I get the message "No Drive attached to Fastrack Controller, Bios could not be started".
Which is not a problem.
I then get the page , stating Windows failed to load please choose an option .
1. Safe Mode
2. Safe Mode with Networking.
3. Command prompt.
4. Last known good config
or Load Windows normally.
No matter what option I select , the PC reboots , bringing me back to this page every time .
Hard drive is a Western Digial 80GB
This is what I have done so far.
1. Changed to CSL no differance
2. Changed cables for HD , and ensured ends are correctly seated in MOBO, no differance
3. Changed to Master no differance
4 . Tested HD on brothers PC ....no problems , boots straight to Windows XP .
I am totally unclear as to what the problem is here . I have read that on ASUS boards a way around this is to disable onboard promise controller.....but I dont see an option in the BIOS for that ....for this MSI board.,
Hope someone can help.

Hmm ok,
Odd indeed that the HD boots fine on my brothers PC, which is substantially older
than this new mobo,
Also different manufacturer as well,....
Anyway , thanks for the help Wonkanoby.

Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
I've tried a Windows DVD install disk plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
I have tried both wireless and USB keyboards and mouse. Same failure.
I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
Has anyone had the same problem?
Has anyone succeeded? If so, any special actions or ideas?

The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
<quote>
If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
</quote>

[SOLVED] Arch Linux Duke (2007) Fails to Boot

Folks, I have a unique and challenging problem that has exhausted my Arch Linux skills, and so I am now turning to you.
I have a vintage Pentium Pro 200 system (that’s 200 MHz folks! – 200 MHz 686 architecture – the original 686!), two CPUs, running a dual boot between Windows NT 4.0 and Arch Linux Duke (2007). It has 512 MB of RAM and a 120 GB hard drive, partitioned up between Windows NT and Linux. I built this system new in 2007, hence the dated version of Arch. It has run like a charm all these years, granted not getting that much use. After about a year of no use at all, I fired the system up last week to help with a little research for a blog post I was writing on networking Windows NT 4.0 and Mac OS 8.6. Windows NT 4.0 fired right up with no issue, and after I was done testing what needed to be tested I tried to boot over to Arch.
After a year of disuse, Arch unexpectedly and stubbornly refused to boot. The boot process started up just fine, but towards the end, it declared that it could not mount the root file system on the root device and took a kernel panic and stopped. My Arch skills have gotten a bit rusty in the last few years, but I dusted them off and went to work. My guess was a file system or superblock error. Arch wouldn’t boot, but I dragged out my trusty RIPLinux 2.9 Rescue Live CD and fired it up. It came right up and ran, and I was able to mount the Arch partition and view all the files… everything seemed to be there; it just wouldn’t boot. Windows NT 4.0 AND RIPLinux both boot and run on the machine, so the hardware is fine as well.
A little information on the disk layout. Windows NT 4.0 is in the first partition on the hard drive. The extended partition has a second Windows NT 4.0 partition (sort of a /home partition for Windows NT 4.0), followed by the main Arch partition (the one I am trying to boot), followed by a swap partition and then the largest partition, which I use to share data between Arch and Windows NT 4.0 (I have loaded an ext2/3 driver into Windows NT 4.0 and it happily accesses the Linux partitions on the box).
RIPLinux’s e2fsck did find some issues with the Arch partition and I had it repair them all. I checked again afterwards that all the files were still there, and they were. With the partition now known to be clean, and the superblock repaired from one of the backups, all should have been well. However, Arch still wouldn’t (and still won’t) boot.
RIPLinux has a kind of a chain loader function, so I had it attempt to start up Arch for me. However, this was flummoxed by the fact that Arch addresses all my hard drive partitions as /dev/sdax and RIPLinux addresses them as /dev/hdax. Hence, without a common language, it was hard to get the one to start the other. Still, using this function, I have been able to get a crippled version of Arch running on the machine again. No modules had been loaded, and so it couldn’t do almost anything, but there it was (and is), Arch Linux Duke, at the CLI level. From there, I can see all the files, I can move freely in and out of my user account and the root account, but I can’t make the thing actually boot properly.
If you have read this far, you are a trooper. Summarizing what I know, the hardware is good, the file system is clean, the superblock is good, I can mount it cleanly from a live CD and I can chain load a crippled version of Arch. Here is the boot process blow-by-blow. When I try to do a normal boot, the Windows NT 4.0 loader passes control to the Lilo boot sector I have placed on hda1 (sda1 in Duke’s parlance). Lilo takes over, present a menu and when I select Duke, takes off. Arch Linux Duke starts to boot. It gets a good long way along, all the way along to:
:: Loading udev events [Pass]
:: Mount root Read-only
:: Checking file systems
This is where it stops.
The next thing I see is:
/dev/sda6
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else) then the superblock is corrupt and you might try running e2fsck with an alternate superblock:
E2fsck –b 8193 <device>
I then get a sort of character based splash screen that says
**********FILE SYSTEM CHECK FAILED ****************************
* Please repair manually and reboot. Note that the root file system
* is currently mounted read-only. To remount it read-write, type:
* mount –n –o remount,rw /. When you exit the maintenance
* shell, the system will reboot automatically
Give root password for maintenance
At this point, I give the root password and enter the maintenance shell as root. I typed in “mount” and the first entry I got back is
/dev/sda6 on / type ext3 (rw)
This is exactly the root partition that the start up complains about. It is clearly there. I can see it, I can walk around it… it is clearly there. Why won’t it boot? Despite the message, the superblock is fine – it passes every test e2fsck can throw at it.
At this point, I did a “e2fsck /dev/hda6 (which is how RIPLinux would have passed it into Arch” and it says it is “clean”. I suspect that the Superblock message is because Arch sees root as sda6, while RIP passed it in as hda6...
Deciding to see what Arch would be seeing as it tried to set things up in the boot sequence, I tried the following next:
# mknod “/dev/root2” b 3 6
(“3” because RIPLinux refers to my hard drive as IDE, while Arch refers to it by major number “8”, which is SCSI. By the way, it IS an IDE drive – not sure why Arch insists on using the sdx nomenclature instead of hdx)
Then I entered “mount /dev/root2 /mnt/hda6” and “ls /mnt/hda6”
All was well. I can make the node, I can mount it, and I can see the contents. All is clearly well, but something is clearly wrong enough that Arch can’t boot.
I am totally out of ideas. I have tried every trick I know and am out of tricks. I would welcome any insights as to what I could try to get this venerable Arch installation back on its legs.
By the way, the key section of the /etc/lilo.conf file (lest anyone want to know) is:
image = /boot/vmlinuz26
root = /dev/sda6
label = ArchLinux-Duke
initrd = /boot/kernel26.img
read-only
I am stumped. Thanks in advance for any and all pointers you may be able to offer.
Last edited by mac57 (2014-06-02 17:42:21)

Folks, thanks for all your helpful comments, and I wanted to report back to you that I finally overcame the issue, and ArchLinux-Duke (2007) is once again executing flawlessly on my old Pentium Pro 200 system. I won't bother reporting here all the blind allies I went down as I tried to figure out what was wrong, but in the end, literally moments before I was about to give up and overwrite my Arch installation with a new Linux variant (antiX seemed well suited for such old and low power hardware), my attention was drawn to a note I had made in my files back in 2007 about a problem with similar symptoms. In that case, I had just deleted ZenWalk Linux from the hard drive (both Arch and Zen had been on the drive), and merged several partitions to make use of the newly free space. This had changed Arch's view of the drive lettering, and what had been its /dev/sddx root device was now /dev/sdcx. Arch failed to boot, throwing off the same errors I was seeing now. I wish I had recalled that note a month or so ago! It would have saved me a lot of work and a lot of frustration.
At any rate, as a last step, and testing the idea that maybe the drive lettering had changed for some reason, I repeatedly manually booted Arch, specifying root=/dev/sda6, then /dev/sdb6, then /dev/sdd6, and finally, /dev/sdc6. Eureka! Arch now considered itself to be on /dev/sdc6 whereas previously it had been on /dev/sda6. This got me part way there, but the boot failed at the filesystem check stage and threw me into root. I disabled the file system check in /etc/rc.sysinit and got farther. Then I cleaned up /etc/fstab to agree with the new sdc naming, and I was back on the air fully.
So, what had happened was that Arch had changed its view of the drive it was on from sda6 to sdc6. While I could not understand why this "sudden" change had occurred, at least I had a solution, and had Arch back up and running.
Trolling through the rest of my notes, I found the answer. In 2012, the Tekram SCSI card in the machine failed, and I ultimately replaced it with an Adaptec card. The Tekram card did not have a BIOS segment on it. The Adaptec card did. My guess is that this caused the two internal SCSI devices I have built into the system (Iomega ZIP and Jaz respectively) to be enumerated first, claiming the "sda" and "sdb". device names. That left "sdc" for the root device, and that is where Arch went next. This is my guess anyway.
I should have caught this issue back in 2012, at the time, but from my notes, I can see that I tested the new card thoroughly using the Windows NT 4.0 side of the machine, but never thought to bring up Arch as well. Hence, this problem lay dormant for two years, before I attempted to fire up Arch last month and blundered right into it.
It has not all been bad. I have learned more about the ext2 and ext3 file systems and superblocks in the intervening time than I will ever need to use. I have learned how to manually boot Linux on a machine whose BIOS is so old that it cannot address the disk cylinder that the kernel is on and I have completely refreshed the many general Linux skills that used to just flow from my finger tips. It has been a frustrating experience, but ultimately a successful and useful one.
Just wanted to let everyone know that this is now [SOLVED]. I would mark the post as such, but I don't see any obvious way to do that. Thanks again everyone.

Macbook fails to boot and safe boot won't log in

Hi All,
This is my first post here after owning a mac for about 2 weeks and then having a serious problem that needed a good dose of Unix know how to fix!
Symptoms are:
1. If you try an boot the Macbook you get a blue screen with a working mouse pointer but nothing else and none of the shortcut keys work
2. If you try and boot in to Safe Boot it won't accept a user name and password (not even root) and gets into an infinite loop.
Cause:
Something called ypbind is trying to contact a Domain that doesn't exist so it gets into a loop and fails. This problem seems to be fairly easy to achieve by playing with the Directory Utility (I was trying to connect to a Windows work group).
Solution:
Boot the macbook into Single User mode (by holding Command-S during start-up). You may need to do a hard reboot by holding down the power button to get it to restart.
At the command prompt locate /etc/defaultdomain and clear its contents using Vi or Pico. Some people have suggested that you can delete the file but clearing it works as well. Then reboot (type exit). The machine should reboot fine. Other things I did to be on the safe side were to check the hard disk and check the permissions using the diagnostic tools on the OSX install CD (it's bootable).
This took me ages to sort out so I hope this helps someone else in the same position.
Regards,
Mark

I have just managed to get duped into getting re-infected with that same PC Optimizer Pro virus.
Ordinarily, System Restore does not remove all the damage from a virus.
Now that you're able to back up your important files, it seems best to to restore the hard disk to its original out-of-the-box contents and reload the applications.
   Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
If that doesn't work, you can obtain recovery media from Toshiba. Scroll down to Get Recovery Media here. For instructions, see the section Restoring from recovery media, which begins on p. 57 of the User's Guide.
   Satellite/Satellite Pro C800/L800/S800 Series User’s Guide
If you restore to Windows 8, be sure to follow the instructions when you upgrade to Windows 8.1.
   How to Update from Windows 8 to Windows 8.1
-Jerry

Compaq Notebook CQ-45 137TX fails to boot

Hello,
I own a Compaq CQ-45 137TX (Intel Core 2 Duo P7350, 3 GB RAM, 320GB HDD, nVidia GeForce 9200M GS, Windows 7(upgraded from Vista)) with a broken LCD Screen. Since repairing the screen made no sense for such an old laptop, I started using it as a desktop by attaching an external monitor and input devices. The computer worked fine for the past few months.
Upon restarting the computer after a hiatus of a week or so, the computer failed to boot and display anything on the external monitor. I think it is failing POST.
The laptop gives out multiple beeps continually (not continuous, multiple beeps that don't end).
I thought that the RAM is faulty and tried to reboot the machine by trying one RAM stick at a time (since the laptop has two). It didn't work for either of the two sticks tried in both slots individually.
I think both the RAM sticks may be faulty, however, I am unable to borrow a RAM stick to test on it.
Before buying a new one, I would like someone to clarify or point out other hardware that may faulty in this laptop. I have had people tell me that my Graphic Card may have given up.
Thank you for your assistance.

Hello @root123 ,
Welcome to the HP Forums!
I understand you're unable to boot up your CQ-45 notebook.
It's unlikely to be RAM if neither card worked in either of the two DIMM slots. It is possible that both cards or slots have failed, but highly unlikely.
The beeping should tell you exactly what the error is. Try looking through this document which should help you identify the error: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
You may also want to try this document as well: Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Let me know if you're able to identify the failure with the beep code and we'll go from there.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Arch fails to boot after installation (BIOS mode)

I finished my Arch installation, following the Beginner's Guide, and once I unmounted the partitions and rebooted, GRUB failed to boot into Arch. I'm not exactly sure what the problem is though. Basically what happens is I power on the machine, the Dell splash screen comes up, GRUB loads, I choose
Arch Linux, with Linux core repo kernel
the kernel and ramdisk attempt to load, then some message about "recovering journal" appears, and then I return back to the Dell splash screen. The same thing happens even if I choose the second option
Arch Linux, with Linux core repo kernel (Fallback initramfs)
However, when I choose to boot Win XP everything boots just fine. My apologies for the quality of the videos and pictures.
Here's a video of what happens:
http://youtu.be/uC96kX6iTjI
I suspect this has to do with this error I got when I generated the "grub.cfg". Although I'm not entirely sure because my understanding is that this error would affect booting Win XP which in fact boots perfectly fine.
Error (and no I'm not using any lvm volumes)
http://imgur.com/qqxpoGG
I believe these are the portions of the "grub.cfg" that load Arch and Win XP. I got these by pressing "e" while on their menu entry in the GRUB bootloader.
Arch (I had to scroll down to see the rest, hence two pictures)
http://imgur.com/79dBw2C
http://imgur.com/qusEfL0
Win XP
http://imgur.com/oLnLlT0
Any idea how I can fix this? Any help is greatly appreciated and please be patient, I know, I'm a noob.
* I'm not sure if this is of any significance but I had a problem very similar to this when trying to get the Arch install to boot via usb (this computer doesn't have CD/DVD drive). I solved it by following this excerpt from the Beginner's Guide.
Troubleshooting boot problems
If you are using an Intel video chipset and the screen goes blank during the boot process, the problem is likely an issue with Kernel Mode Setting. A possible workaround may be achieved by rebooting and pressing
e
over the entry that you are trying to boot (i686 or x86_64). At the end of the string type
nomodeset
and press
Enter
Here's a video of what it looked like:
http://youtu.be/vXRcbU0zdto
The computer specs:
OS: Windows XP Professional 32 bit Version 2002 Service Pack 3
CPU: Intel Pentium 4 @ 3.00 GHz
RAM: 2 GB DDR2
HDD: 80 GB

Hi,
why did you not try adding nomodeset with the regular boot? During the net-install no video drivers will be installed;
you have to install them after reboot after installing xorg. The (video)problem you had with booting from usb is still
present.

Windows 7 install failing on brand-new Apple-replaced harddrive

I just got my (8-week-old) computer back from Apple, with a brand new hard drive. Before restoring all my files, I figured I'd get Boot Camp installed so the partitions are set, etc.
Every time I try, the Windows 7 install fails about 10% of the way in, with either a 0xC0000005 error (installation sources are unaccessible) or a 0x80070005 error (the only Apple support document about this talks about an upgrade from Vista, which isn't what I'm doing).
Reading posts, I disconnected my USB hub, and this time I got a BSOD with this error:
iRQLNOT_LESS_OREQUAL
In between tries, I used Disk Utility to remove the boot camp partition, and reset my Mac partition to use the whole drive, so that I could start cleanly with Boot Camp Installer. The one time I tried to launch in Windows and repair, it brought me to the "click any key to launch from DVD" but hitting a key did nothing.
I've installed Boot Camp and Windows 7 twice before with this install DVD, and multiple other times with other DVDs/computers.
Ideas? I'm thinking there's something other than a bad hard drive that was wrong with my computer.

Only by either installing Windows on your iMac as a separate partition through Bootcamp, or setting up a virtual Windows machine via the likes of VMWare Fusion, or Parallels Virtual or Desktop.
Factor in the cost of Windows and I think you'll find a new copoy of Mac Photoshop Elements would be cheaper.
You could also try the excellent Graphic Converter from lemkesoft, or the open-source Gimp,

Upgrading Windows 7 (Legacy BIOS/MBR Disk) to Windows 8 (UEFI/GPT/Secure Boot)

Hi there,
I've recently purchased a W530 with Windows 7 pre-installed. Ultimately, I'd like to replace this with Window 8 + Secure Boot. I believe I can get Windows 8 via the Microsoft Upgrade offer for a reasonable price, since this was a recent purchase.
What's the best way to reach my goal?
The Windows 7 install uses Legacy BIOS to boot with an MBR disk.
I had a quick look at Acronis, and I can see that it's possible that the "OS will be automatically converted to support UEFI booting" (http://www.acronis.com/support/documentation/ABR11/index.html#14021.html) when using it's tool.
If I don't use this approach, what can I do? Can I:
1. Use Rescue and Recovery in Windows 7 (Legacy BIOS/MBR disk)
2. Wipe the drive and reformat it with GPT?
3. Install Windows 7 with UEFI enabled using the Rescue and Recovery made in step 1?
4. At this point, I would now have UEFI and GPT.
5. Perform an Upgrade from Windows 7 to Windows 8 and enable Secure Boot?
Any thoughts as to whether this would work?
Richard.

Hi richii,
The Acronis approach ends up in failure. Didn't give it a second look at the reason, since the tool it's not necessary. I also tried several other "automatic" tools without success.
The recovery approach will fail because it's tied up to BIOS boot.
But I've performed the conversion from BIOS to UEFI two times successfully. After some digging, is not SO hard. It's just... "undocumented". Very, very undocumented, hehe. I made a step-by-step guide: http://social.technet.microsoft.com/wiki/contents/articles/14286.converting-windows-bios-installatio...
Let me know if it helps you...
Anyway, if you don't have data/software, I would go for the clean install approach.
Cheers.
If I helped you, please give me some kudos! ^^

Windows 8.1 fails to boot

Similar Messages

Maybe you are looking for