Windows 8.1 Fingerprint Reader Will Not Work With IE11
After upgrading to Windows 8.1, I am having issues with Fingerprint Reader in Internet Explorer 11. I have upgraded to the latest Lenovo FPR software for Win 8.1 (6.0.0.8102) which has not helped.
FPR works fine to log-on into Windows 8.1.
When I try to activate the FPR in the LastPass Vault (IE11), I get an error message for a missing file - BIOCPL.DLL. I noticed that this file is present in the System32 directory for Windows 8 but it does not exist in Windows 8.1.
I copied biocpl.dll to the Win 8.1 System32 directory but it still doesn't work.
Any ideas??
E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
Solved!
Go to Solution.
Sounds to me like you are going to need an update to LastPass that is compatible with Windows 8.1.
BIOCPL.dll is the OS component that implements the Biometric Control Panel on Win7/Win8. But Microsoft moved all the Biometrics stuff from desktop into metro, in Win8.1. That's why this file no longer exists in the OS on Win8.1. Sorry to say, I don't think there is any possible solution to this problem other than asking the LastPass people for a new version.
Similar Messages
-
Adobe reader will not work with games
adobe reader will not work with games
That is correct. Adobe Reader is intended for viewing PDF files, not for playing games. Perhaps you are thinking of Adobe Flash Player?
-
Tecra 9000: SD card reader will not work with XP
I have made some progress with this subject, it seems that Cardbus devices cannot share IRQs, although the main issue is that the memory address FFDFB200-FFDFB3FF is shared by both the SD card controller and the SD Card Memory Device. Unless a way to modify the registry can be found to resolve this memory conflict, the simple answer is that the SD card reader won't work under XP.
I think this would take some major surgery of the registry or re-writing of the drivers to move the memory address used by the SD card device, I am still working on this for now.
Can someone from Toshiba Support or Toshiba Marketing please explain to me why my Tecra T9100 has a sticker with "Designed for Windows XP and Windows 2000" on it, when Toshiba don't fully support XP on the 9000 series?
David
[Edited by: admin]Hi David
Unfortunately, I dont think that you will find here someone from Toshiba marketing or other departments. This is ONLY a user to user forum.
What you say is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all this Toshiba images from the Toshiba service partner. Therefore Tecra 9000 does support Windows XP!
Tecra 9100 was delivered with Windows XP and Windows 2000 and supports also Windows XP!
Of course there are different models with different hardware configuration but all supports WinXP.
I dont know why you get this error message or why you cannot use the SD card but I assume you dont use the Toshiba image. Therefore you have installed your OS not correctly. Because youre a newbie you dont know that the whole Toshiba driver installation must be done in the right order and all the Microsoft QFEs must be also installed.
As you see you have to pay attention to many important things if you want to install the OS manually.
Have a nice day -
Finger print reader will not work with password manager
i have the finger print reader working fine to log into windows but when i select advanced options for a password protected site in password manager,and custom security level ,when i click on protect with finger print,it says i have not enrolled any finger prints with client security solution,when i check the fingerprint tab in client security solution it shows my fingerprints what i have stored,why is this conflict happening?when i check my web email i want to be able to swipe my finger and log in not keep typing my password in,anybody know how to sort this??
Hi,
I have the same problem, help me please.
I have the 3000 N200 notebook, when I use the finger print to log on using the windows vista logon it work fine, but if I try to use it with ThinkVantage technology (such password manager) it told me that the device is not installed.
(Sorry for my english.) -
TS1538 Ipod Classic will not work with Windows 8. Is there a fix?
Itunes will not work with Windows 8. I have the latest version of itunes!
When will the fix be available?
When I try to Sync my ipod, nothing happens.Hi,
You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version. -
HDX 9010nr, Radeon 2600 will not work with WIndows 7
Apparently, HP is not going to support the HDX 9010nr for Windows 7. That's the bad news, the good news is that it "mostly" works.
The only big issue is that the display driver stops every few minutes and then restarts. So you sit there for thirty seconds while the machine recovers. But, it doesn’t support a second screen; and worse, every 10th time the video driver crashes; it locks up the whole machine.
ATI has a version of the Radeon 2600 software that worked with the Release Candidate (RC) of Windows 7, but it will not work with the shipped version of Windows 7. ATI recommends that you get a version from your hardware vendor. Which brings me back to the first sentence. HP isn't supporting the 9010nr.
The question is do any of the "supported" HP laptops have the ATI Radeon 2600? If so, might that work on the HDX 9010nr?
This question was solved.
View Solution.Updating the BIOS solved this problem.
-
I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.
-
Product key will not work with this edition of Windows 7
I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag -
Foolishly, I got a message to install the newest version of Firefox and did so without considering the consequences. Now, my Digitalpersona fingerprint reader will not work and I have many many programs that I use this feature. (It enables me to avoid typing username & passwords for different sites). I have tried to find the older version 5 to reinstall it, but so far have not been able to do it. All the Mozilla sites just offer version6. HELP!
Yes, of course.
Here is the link for all of the versions:
[ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ Firefox All Releases]
Don't forget to hit 'Solved it'.
'''IMPORTANT NOTE: Don't forget that the previous versions might have security problems. For the latest security updates you MUST upgrade to latest version. That's what I STRONGLY recommend. If you really want to downgrade the recommended version is 3.6.21. Thank you for paying attention!''' -
PSE13 trial version and it will not work with Windows 7
I have downloaded PSE13 trial version and it will not work with Windows 7
I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne -
HT5634 i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?
i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?
Welcome to Apple Support Communities
You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634 -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you helpWhy don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link. -
MyDAQ fails Self-Test and will not work with any software
I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip 341 KBHi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG 40 KB -
Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
How can I organize a large book collection?
From what I understand iBooks only supports 1-level folders/categories. For instance, what I'd like to have is various genres at a top level (fiction, sci-fi, fantasy, religion, ecc.) and then several folders in each one of them, to group similar boo
-
Calendar Doesn't Show Appointment End Dates in Month View
I'm trying to use iCal as my family calendar, but when I look in month view I only see the start time, not the end time as well. Is there a way to see and print both? Thanks!
-
Creation of new field with the absense of user exit
Helllo Abapians, For one of the T.Code , i dont find any user exits for that T.code.but one customized field is there to that T.CODE. How it is possible???
-
Can I turn my soon to be old Apple TV into a wireless hard drive like TC???
Can I turn my soon to be old Apple TV into a wireless hard drive like the TC???
-
I have sony handycam, trying to import, nearly 20 hours on "Optimizing"...what is wrong?
I just bought mac last night.... Trying to import movies from my sony handycam to my mac, and for the past 20 hours it has said, "Optimizing Video" with no progress bar moving.... What is wrong? Does the video camera need to be converted first? If so