WINDOWS 8.1 FINGERPRINT IS NOT WORKING AND IS NOT SHOWING IN MY SIGN UP OPTION
My windows 8 fingerprint was working but when i upgraded my laptop to windows 8.1. My fingerprint is not now working with my windows 8.1 and it does not show on my
Hello VICTOR1234567890,
What is your current situation?
Have you tried to enable the Biometrics group policy and install the related software from the manufacturer website as MVP Arnav Sharma mentioned?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Similar Messages
-
my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes
OK, and when you searched for information on iPhone error 4005 what did you find?
-
EZ Vinyl Converter problem transferring to iTunes - window appears "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again. I have now tried many times.
The deck is ION TTUSB05XL Laptop Asus V550C with Windows 8.
Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
JJREZ Vinyl Converter problem transferring to iTunes - window appears "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again. I have now tried many times.
The deck is ION TTUSB05XL Laptop Asus V550C with Windows 8.
Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
JJR -
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..
How do you know its charging very very slowly? Is the screen back on?
Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
Just leave the phone in and do what is said above.
How long do you think it will take to charge to 100%? -
How can I set up icloud phote streaming to my home computer?
When I follow their directions my comuter does not show the Icloud icon uner the control panel / netwrok internethttp://www.apple.com/icloud/setup/pc.html
To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required). -
Windows 8.1 laptop computer not showing in SCCM 2012 devices collection
Hi,
I am trying to do a POC on license management from SCCM 2012. I have configures a SCCM 2012 server and intune subscription also. I have Android, iOS and desktop apps uploaded (.msi). when I enrolled android and ios devices its shows up in SCCM,
devices collection but do not show in Intune.
my company portal is nicely coming up on android and iOS tabs. on the other hand company portal showing only Web apps, on a win8.1/7 laptop.
When I tried to enroll 2 windows 8.1/ 7 laptop (intel x86), they donot show up in SCCM. clients of intune manually installed, endpoint protection of SCCM installed also on both boxes.
I tried updating membership in SCCM for both know and unknown type, many time and also triggered Deployment of some desktop app, to the win 8.1 laptops. the desktops are showing in Intune All devices -> all computers nicely. But
not in SCCM2012.
what did I missed, I tried to add all the logical roles. below is some details what shows up in Intune:
indranilIf you installed the Intune agents on the Win 8.1 and Win 7 systems, then they will never show up in ConfigMgr.
There are basically two parts of Intune -- a Mobile Device Management piece and a Windows management piece. The Intune connector in ConfigMgr takes over the MDM piece and nothing more. When ConfigMgr takes over this MDM piece, as Torsten said, all MDM devices
enrolled show up in ConfigMgr and not Intune because that's now controlled by ConfigMgr. The Windows management piece remains unchanged and separate though and so those systems will be directly managed by Intune only or ConfigMgr only.
So you have three options there:
- Install the ConfigMgr agent and managed using COnfigMgr
- Install the Intune agent and manage using Intune
- Enroll the systems using OMA-DM which manages them as if they were devices. This means so you don't get SCEP or Windows Updates or most of the other ConfigMgr functionality. This is only valid for Win 8.1 though.
Jason | http://blog.configmgrftw.com -
The capture window in Premiere Pro does not show video feed from Beta SP
Dear Sirs
The capture window in Premiere PRO CC with blackmagic 4k extreme (Desktop Video 10.1 for Windows) does not show a live video feed in, from analog beta sp, It works only in media express.
Can you help us?
Thanks
AlessandroStarting from a fresh new win7 installation, all problems solved
Bye
Alessandro -
Preview window in premiere 10 will not show view video images
My Premiere 10 preview window will not show video images. There has been some on-line discussion that nVidia GeForce video card automatic updates is the problem and it has been suggested that I roll back to a previous card however the rollback button does not light up and can not be activated. Also I'm not sure that I'm using the correct settings for the preview window, what are the default settings?
I recommend that you try your question in premeire forum, so you have a better chance of getting an answer.
http://forums.adobe.com/community/premiere_elements - premeire elements
http://forums.adobe.com/community/premiere - premeire pro -
As said above...cannot put a reserve price on my add... I did put a buy now price... but it does not show up on the add!!!
pylapatus wrote:
As said above...cannot put a reserve price on my ad... I did put a buy now price... but it does not show up on the ad!!! For an auction you do not need a reserve price -- just start the auction at the minimum price you want. You should not start at 0.01 -- most auctions these days rarely get 2 bidders. And you need at least 2 bidders for an auction to work for you. If there is a bid, the buy-it-now option will disappear. You do have a bid showing for that item -- so Buy-It-Now is removed for your auction. Option of last resort: You can (1) cancel the bid, (2) then cancel the auction and (3) list again with options properly set up. -
whenever i try t open iBooks from my newly Updated OS Mavericks it asked me to sign in but there are no textbox or form where i can fill the credentials but it is giving me 3 options cancel, create new apple id and sign in when i click on sign in it reappears and the same thing happens for other two options also, i am not able to login into iBooks, Someone help me....
I'm having exactly the issue, but found that itvdoes not happen all the time.
It seems to be dependent on the network I am logged in. -
my iphone4 keeps freezing on me and now it will not unfreeze. None of the buttons are responding and my iphone will not show up in iTunes. Please help!
See: If you can't update or restore your iOS device
-
Netinstall images not showing up when holding down option key at startup
Hi,
I have setup two Netinstall images on my 10.5.5 server. On the clients I can see the two images via the 'Startup Disk' tab in System Preferences. But the images are not showing up when holding down the option key at startup. As I am getting ready to deploy to two labs of new iMacs, I would like to be able to get the Option key at Startup method to work as per the documentation.
Any ideas why these images are not showing up as they should?I am having this problem on a 10.5.5 NetBoot server too. I can NetBoot clients by selecting a network volume in System Preferences > Startup Disk, but I can not see the network volumes when option-booting. I am having problems NetBooting while holding down the N-key too. The funny thing is that it works on new Intel iMacs, but not on Mac Pro1.1 (even with the latest firmware updates). NetBooting the Mac Pro works fine when selecting a NetBoot volume in System Preferences > Startup Disk.
Does anybody have a solution? Is this a problem with Leopard Server 10.5.5?
I am running DeployStudio Server v1.0rc9, and the NetInstall set is made with DeployStudio Assistant.
Everything looks right with my bootpd.plist and log file.
Dec 14 22:08:37 xserve bootpd(6722): server starting
Dec 14 22:08:37 xserve bootpd(6722): re-reading /etc/bootptab
Dec 14 22:08:37 xserve bootpd(6722): Loaded 0 entries from bootptab (0 bad)
Dec 14 22:08:37 xserve bootpd(6722): server name server.example.com
Dec 14 22:08:37 xserve bootpd(6722): interface en0: ip 158.36.32.190 mask 255.255.255.192
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: re-reading configuration
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: shadow file size will be set to 48 megabytes
Dec 14 22:08:37 xserve bootpd(6722): bsdpd: age time 00:15:00
Dec 14 22:08:39 xserve bootpd(6722): BSDP INFORM (en0) 1,0:17:f2:2:d5:9e NetBoot001 arch=i386 sysid=MacPro1,1
Dec 14 22:08:39 xserve bootpd(6722): NetBoot: (1,0:17:f2:2:d5:9e) BSDP ACK(LIST) sent 158.36.32.161 pktsize 310
Dec 14 22:08:39 xserve bootpd(6722): service time 0.000667 seconds
Dec 14 22:08:52 xserve bootpd(6722): BSDP INFORM (en0) 1,0:17:f2:2:d5:9e NetBoot001 arch=i386 sysid=MacPro1,1
Dec 14 22:08:52 xserve bootpd(6722): NetBoot: (1,0:17:f2:2:d5:9e) BSDP ACK(LIST) sent 158.36.32.161 pktsize 310
Dec 14 22:08:52 xserve bootpd(6722): service time 0.000622 seconds -
Why are my mobile pics sent to my email not showing up as a download option?
I am sending pictures from my mobile phone to my email. Normally the pics would show up as a download option. Now they are showing up as a full picture in my email. This is a problem because you cannot save or edit the picture properly. I have not changed anything that I am aware of that would have caused this to happen. Could you please explain to me what I need to do in order to reverse this back to how it has been?
If you did the usual fix of removing battery for a short time and that did not work, try deleting the email address from the BB. then remove battery for a few minutes, then re-enter you email address's.
good luck -
"Compose SMS" not showing up on the messaging options
When I go to the message application and click the menu button, "Compose SMS" does not show up in the list. I am able to receive text messages but I cannot reply to them either. Can anyone help me?
Solved!
Go to Solution.Are You on a BES or using a BIS Service?
If your're on a BES (receiving corporate email on your device) the IT administrator can block the ability to send sms messages.
Which would stop the option to 'compose sms'.
Silly question because it should have been the first thing you did, but have you pulled the battery out with it SWITCHED ON and NOT plugged into anything?
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~
Maybe you are looking for
-
Time [ Quota Generation for Part-time employees]
Hi Experts, I need a help. I have a following issue. 1] Whenever an employee is marked with a tick '' as Part-time], I want the quota to be generation based on the Weekly workdays [field in SAP WKWDY]. 2] I used the option of defining reduction rul
-
How to Download a PDF file from Webdynpro ABAP Screen
Hi, I have developed a input form in webdynpro - ABAP(Not Adobe), As I am not using above services here, but would like to download the information I am capturing into a PDF file. can I do it without using adobe interactive forms ? thanks Siddharth
-
Hi, First I must say I'm sorry if this has already been answered but I haven't been able to find anything that quite fits. I have copied some DVDs I own using Mactheripper and handbrake and have added two audio tracks to use in iTunes and on my iPad
-
Estimation of dbsize in OWB Runtime Repository
Hi, I would like to know the procedure how to estimate the dbsize required for owb runtime repository. Any help would be appreciated greatly. Thank you, Regards, Gowtham Sen.
-
Hi I am doing DS 5.2 migrate to DS6.1. I have DS5.2 and messaging server 6.2 in cluster environment. I am OK with migration process but how to replace existing ldap resource in cluster with the new setting. My messaging resource is dependent on ldap