Windows 8.1 freeze after running HYPER-V and can't reboot
Hello,
For my student projet I need to buid 2 VM using Hyper-v on my PC.
But when I activate the Hyper-v role in Windows 8.1 Pro and create a VM or import one, the system freeze when loading it and if I want to resrtart the PC, I see desktop but il freeze instantly...
My configuration : MSI GX60
AMD A8-5550M ES
AMD 7970M
8 Go RAM DDR3 1600MHz
Thank you for your help
(sorry if I do some errors in english, I'm french..)
# for hex 0x80070003 / decimal -2147024893 :
COR_E_DIRECTORYNOTFOUND corerror.h
# MessageText:
# The specified path couldn't be found.
# 1 matches found for "0x80070003"
Hi,
First,run this dism command to repair Windows:
DISM /Online /Cleanup-Image /RestoreHealth
Then,reinstall .NetFrame to check the result.
Also,please find more error log in the event view.
It seems this issue was caused by application crash.
Regards,
Kelvin Xu
TechNet Community Support
Similar Messages
-
Satellite P200 freezes after 5-10 min and need multiple reboot to work fine
Sorry in advance for my poor level in english because im french ...
My p200-1de has a strange problem :
Every day when i start a new session, it work fine (booting until the desktop) and i start to work.
After 5-10 min, windows vista (ultimate) freeze and i need to stop/reboot many time to finally success and boot until the desktop.
Sometime i need to boot in safe mode without network and wait on desktop for 5 min
It seems like some part or piece of the notebook need to be hot to work fine (something twisted maybe)
I cleaned with dry air the fans windows without improvements. I bought new memories from toshiba in france and the problem is still there. The hard disks are ok (scanned and tested)
The warranty is ended last january so ...
Does someone have any idea?
thanksHi!
Have you cleaned the notebook with compressed air spray? This could blow out the dust from the cooling ventilators and therefore you must not disassemble the notebook.
Im not sure but it could be also a software issue. Have you reinstalled the notebook with the Toshiba recovery disk?
This disk contains the factory settings with all drivers and tools. So you can determine if its a hardware or software issue.
Bye -
Youtube videos freeze after a certain point and can't be played
Every time I get on Youtube I can watch up to like 30 seconds of a video and then it freezes and I can't play. I've cleared my cache, I've checked for updates, I've restarted the computer etc. Its not my computer I know because when I use Chrome the videos work.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.
Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard. -
My Mac computer freezes after running for 15 min even after seeting the energy saving to 3 hours. Any ideas how to stop the freezing/
Hi Teodorafrombc,
Thanks for visiting Apple Support Communities.
If your computer is becoming unresponsive, you may want to see if specific applications are causing this behavior. Try using the Force Quit menu to check for unresponsive applications:
Using the Force Quit feature of OS X makes an application close, even when it is not responsive.
Important: Normally you should not need to force quit an app to close it. When an app is forced to quit, any unsaved changes to open documents are not saved, so try these methods to normally close the app first:
Choose Quit from the app menu. For example, in Safari, choose Safari > Quit Safari.
Choose Quit by right-clicking or control-clicking on an app's icon in the Dock
You can find the article with these steps here:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
If your display is going blank or seems to be going to sleep unexpectedly, try these steps first:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the article with these steps and more information here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
If these steps don't resolve the issue, feel free to reply with more information about the symptoms you are experiencing.
Best,
Jeremy -
I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??
Have you opened Acrobat and gone to Help>Updates to get an updated install?
-
I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process: iTunes [5092]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [111]
Date/Time: 2011-07-26 12:08:18.568 -0500
OS Version: Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report: 504736 sec
Crashes Since Last Report: 20
Per-App Crashes Since Last Report: 13
Anonymous UUID: B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/secSame thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari -
I cannot install creative cloud after running the cleanup tool can any one help
I cannot install creative cloud after running the cleanup tool can any one help?
Hi len@iostudios,
Please follow the link https://helpx.adobe.com/download-install.html to install creative cloud.
Incase you have any issue
Please let us know with the exact error or attach the screenshot if possible.
Regards -
A1145 imac g5 isight 2.1GHz
, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
Apple HardWare Test Passed
10.5.11
Orginal DVD's 9.2Could be a heat problem.
Also, try these:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436 -
Video freeze after 9 second playing then need to reboot, help?
video freeze after 9 sec play, then need to reboot, help?
video freeze after 9 sec play, then need to reboot, help?
-
Windows XP SP3 Freezes After Installation of Nvidia Quadro FX3000
Greetings to all! I have an older Dell running Windows XP SP3. It had an Nvidia Quadro FX1000 which began going bad and I replaced with a Quadro FX3000 model. The drivers I downloaded from Nvidia's web site were the most recent qualified
drivers (yep, they were old, but still the correct drivers). After of the installation of the card and the drivers Windows boots normally to the logon screen. After typing in my password Windows tells me its loading my personal settings, then freezes
with no further activity. I'm unable to use the mouse at that point and can't shut down gracefully.
I can boot successfully into Windows via Safe Mode and log on using my password. However, the system always hangs after logging on when I just boot straight into Windows without using safe mode.
Can anyone weigh in with a possible reason for this to occur. It's driving me crazy. I'm sure the answer is right in front of me, I'm just not seeing it.
Thanks in advance!Hi!
I know its almost a month since you posted, but I would boot in to safe mode, remove the display drivers and install an older version of the driver. For instance the driver that was released before the latest one.
This has done the trick for me a few times with other hardware!
Best regards
Andreas Molin
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin -
Logic pro crashes / freezes after running about a hour after updating
Hope anyone can help me.
I use G5 powermac.
Had 10.3.x running with Pro6 with no problems (because of that I'm a big mac fan
I updated to Pro7.2.x and also to OSX 10.4.8 when the problem started
It's a strange problem, it seems something happens in my computer after a period of time.
Logic is always crashing / freezes after working with it for about 1 hour (not sure exact time). When I just leave my mac on for the same period of time not running logic and start up Logic later it also freezes imidiately. But only logicpro seems to have this problem. All other programs working well.
I need to restart my computer to start working again and then again after a period logic crashes again. I also installed logic express but express works well.
I already reinstalled everything a few times and also working with just the basic (no plugs, interal audio, no hardware, no extra memory ect.) didn't help. I did changed discdrives, internal memory ect.
Hope anyone has an idea what it can be
Thanks for helping
Powermac G5 SP 1.8 Mac OS X (10.4.9) 2GB int. memhi,
look here:
http://docs.info.apple.com/article.html?artnum=302212
hier you will find the right downloads for the firmware update for the late 2004 g5 1.8. choose the right updater for your system.
it should also appear if you use the software update.
after that it should work like before.
hope that helps
all the best
andreas -
Windows 7 Pro freezes after a few sec
Hello,
I've installed a some minutes ago Windows 7 on my MBP 13" Mid 2010. The installation process was sucessful and without any problems. Also the driver install.
But when I wanna use Win 7 it freezes after ~30sec and I cant do anything. I didn't see any strange things. One more driver is still installing IEEE 1394.
What can I do? Please help
Greetings from Germany,
MaxAfter Windows gets installed, inserted Apple OS X DVD (in Windows) and install 3.0 and then check Apple Software Update (still Windows) to get 3.1 and 3.2.
Shame that you can't just go straight to 3.2.
Did you give Windows 32-49GB space?
Which version? 32-bit? from DVD? OEM? -
IMac freezes after downloading Macromedia Flash and Shockwave
I just got my iMac less than a month ago. It ran fine until I downloaded the latest versions of Macromedia Flash and Shockwave in order to view certain websites. Since then, my iMac freezes about once a day. How do I uninstall Flash and Shockwave to determine if they are the cause of the freezes?
iMac 20" 2.16GHz Intel Core 2 Duo Mac OS X (10.4.9) 128MB VRAM, 2GB 667 DDR2 SDRAM - 2x1GBI have a gut feeling it's Shockwave that is causing the freezes. If you aren't familiar with Spotlight yet, it's the icon with a blue circle top right in your Menu. Click the Spotlight icon, in the Search field type in Shockwave. That will give you a list of where the Shockwave folders are and the components. Drag the Shockwave files to the Trash and empty the Trash.
As far as Flash is concerned, I've been using Macromedia's Flash with Safari for years without a glitch, but that's just my experience. If it were me, I'd trash Shockwave and see how your iMac behaves before I did anything about Flash
Also, there's a great disk utility that can help keep your iMac running stable and it's free. Here's where you can get it: http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html Download and install. Run the Maintenance and Cleaning scripts... once a week!
Carolyn -
i cannot install update for iOS 8.1.1
it freezes after I click that I agree with the terms and conditions.
same happened for iOS 8.1
i restarted several times the iPad but nothing changedHad the same issue... Saw post on another thread.. you have to be conencted to the internet AND logged into your iCloud account.
Once I logged into iCloud, all worked...
Kev.
Maybe you are looking for
-
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
-
Converting .mkv to mp4 to work on Xbox 360
Using the passthrough method on Quicktime but the resulting file does not playback on my xbox 360. However using the Windows app XenonMKV, the resulting file works. Anyone know how to get all .mkv files through Quicktime to work? Maybe a Xbox 360 pre
-
Hello Gurus, After booked the Dropship order, initially i got the error as workflow stuck in Purchase Release Deferred. After running the workflow background process, i am able to perform the progress order funtions. In the progres order function whe
-
Comment télécharger une versio d'essai de Photoshop cs6
Bonjour, je cherche à télécharger la version d'éssai de photoshop cs6 et n'y arrive pas, merci de votre aide Message was edited by: PECourtejoie
-
Copying of manual conditions from SO to Billing
Hi experts, I am facing some problem in copying manually entered conditions from sales document to Billing document. It is delivery related billing.Service entry sheet. I had checked copy control, ,- In header data Copying requirements 001 Header/