Windows 8.1 Hyper-V virtualization rights

So in Windows 7 Pro we had XP mode. It was a full copy of XP which was licensed under the Windows 7 Pro license. Do I have the licensing rights to install Windows 7 Pro on my Windows 8/8.1 machine using Hyper-V?
Quite often my company uses XP mode to run 16 bit applications, or apps that just seem to work better on a 32 bit system, but I really don't want to have to keep getting Windows 7 machines when 8/8.1 works fine except for these old apps which I need an older/32
bit system.

Hi,
The Windows 8 x86 can run the 16-bit application， please refer to the following link.
http://social.technet.microsoft.com/forums/windows/en-US/d03a56cb-0039-42b7-962d-a389caab99f9/installing-windows-8-32bit
I don’t think you have the license right of the Windows 7 Pro in Windows 8 Hyper-v, if you don’t buy it.
Please refer to the license agreement as follow.
http://download.microsoft.com/Documents/UseTerms/Windows_8_English_ca383862-45cf-467e-97d3-386e0e0260a6.pdf
Additionally, if you install the Windows 7 in Hyper-v, you will not be able to use XP mode, because XP mode is a vitual mode and the Hyper-v is a virtual machine.
You can't use vitual mode in a virtual machine. Please refer to the following link.
http://social.technet.microsoft.com/forums/windows/en-US/78578f0d-4891-4bbf-8bbb-6b9eb05bc031/want-to-run-xp-mode-on-windows-7-vm-on-hyper-v
If there are any problems, please let me know.
Best regards

Similar Messages

Windows Server 2012 - Hyper-V - Cluster Sharded Storage - VHDX unexpectedly gets copied to System Volume Information by "System", Virtual Machines stops respondig

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM. This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM. This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched off.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, VMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation:
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with two 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair.
Our Problem:
Our problem is that for some reason a random VHDX gets copied to System Volume Information by "System" of the Clusterd Shared Storage (i.e. C:\ClusterStorage\Volume1\System Volume Information).
All VMs stops responding or responds very slowly during this copy process and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
This happens at random and not every day and different VHDX files from different VMs gets copied each time. Some time it happens during daytime wich causes a lot of problems, especially when a 200 GB file gets copied (which take a lot of time).
What it is not:
We thought that this was connected to the backup, but the backup had finished 3 hours before the last time this happended and the backup never uses any of the files in System Volume Information so it is not the backup.
An observation:
When this happend today I switched on ShadowCopy (previous files) and set it to only to use 320 MB of storage and then the Copy Process stopped and the virtual Machines started responding again. This could be unrelated since there is no way to see
how much of the VHDX that is left to be copied, so it might have been finished at the same time as I enabled ShadowCopy (previos files).
Our question:
Why is a VHDX copied to System Volume Information when scheduled ShadowCopy (previous version of files) is switched off? As far as I know, nothing should be copied to this folder when this functionis switched off?
List of VSS Writers:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
   Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
   Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
   State: [1] Stable
   Last error: No error
Writer name: 'VSS Metadata Store Writer'
   Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
   Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
   State: [1] Stable
   Last error: No error
Writer name: 'Performance Counters Writer'
   Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
   Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
   State: [1] Stable
   Last error: No error
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {7848396d-00b1-47cd-8ba9-769b7ce402d2}
   State: [1] Stable
   Last error: No error
Writer name: 'Microsoft Hyper-V VSS Writer'
   Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
   Writer Instance Id: {8b6c534a-18dd-4fff-b14e-1d4aebd1db74}
   State: [5] Waiting for completion
   Last error: No error
Writer name: 'Cluster Shared Volume VSS Writer'
   Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}
   Writer Instance Id: {d46c6a69-8b4a-4307-afcf-ca3611c7f680}
   State: [1] Stable
   Last error: No error
Writer name: 'ASR Writer'
   Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
   Writer Instance Id: {fc530484-71db-48c3-af5f-ef398070373e}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {3792e26e-c0d0-4901-b799-2e8d9ffe2085}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {6ea65f92-e3fd-4a23-9e5f-b23de43bc756}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {71dc7876-2089-472c-8fed-4b8862037528}
   State: [1] Stable
   Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
   Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   Writer Instance Id: {cb0c7fd8-1f5c-41bb-b2cc-82fabbdc466e}
   State: [1] Stable
   Last error: No error
Writer name: 'Cluster Database'
   Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}
   Writer Instance Id: {23320f7e-f165-409d-8456-5d7d8fbaefed}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {f23d0208-e569-48b0-ad30-1addb1a044af}
   State: [1] Stable
   Last error: No error
Please note:
Please only answer our question and do not offer any general optimization tips that do not directly adress the issue! We want the problem to go away, not to finish a bit faster!

Hallo Lawrence!
Thankyou for youre reply, some comments to help you and others who read this thread:
First of all, we use Windows Server 2012 and the VHDX as I wrote in the headline and in the text in my post. We have not had this problem in similar setups with Windows Server 2008 R2, so the problem seem to be introduced in Windows Server 2012.
These posts that you refer to seem to be outdated and/or do not apply to our configuration:
The post about Dynamic Disks:
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx is only a recommendation for Windows Server 2008 R2 and the VHD format. Dynamic VHDX is indeed recommended by Microsoft when using Windows Server 2012 (please look in the optimization guide
for Windows Server 2012).
Infact, if we use fixed VHDX then we would have a bigger problem since fixed VHDX are generaly larger then Dynamic Disks, i.e. more data would be copied and that would take longer time = the VMs would be unresponsive for a longer time.
The post "What's the deal with the System Volume Information folder"
http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx is for Windows XP / Windows Server 2003 and some things has changed since then. for instance In Windows Server 2012, Shadow Copies cannot be controlled by going to Control panel -> System.
Instead you right-click on a Drive (i.e. a Volume, for instance the C drive/Volume) in Computer and then click "Configure Shadow Copies".
Windows Server 2008 R2 Backup problem
http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/0fc53adb-477d-425b-8c99-ad006e132336 - This post is about the Antivirus software trying to scan files used during backup that exists in the System Volume Information folder and we do not
have any antivirus software installed on our hosts as I stated in my post.
Comment that might help us:
So according to “System Volume Information” definition, the operation you mentioned is Volume Shadow Copy. Check event viewer to find Volume Shadow Copy related event logs and post them.
Why?
Furhter investigation suggests that a volume shadow copy is somehow created even though the Schedule for Shadows Copies is turned off for all drives. This happens at random and we have not found any pattern. Yesterday this operation took almost all available
disk space (over 200 GB), but all the disk space was released when I turned on scheduled Shadow Copies for the CSV.
I therefore draw these conclusions:
The CSV Volume has about 600 GB of disk space and since Volume Shadows Copy used 200 GB, or about 33% of the disk space, and the default limit is 10% then I conclude that for some reason the unscheduled Volume Shadow Copy did not have any limit (or ignored
the limit).
When I turned on the Schedule I also change the limit to the minimum amount which is 320 MB and this is probably what released the disk space. That is, the unscheduled Volume Shadow Copy operation was aborted and it adhered to the limit and deleted the
Volume Shadow Copy it had taken.
I have also set the limit for Volume Shadow Copies for all other volumes to 320 MB by using the "Configure Shadow Copies" Window that you open by right clicking on a drive (volume) in Computer and then selecting "Configure Shadow Copies...".
It is important to note that setting a limit for Shadow Copy Storage, and disabaling the Schedule are two different things! It is possible to have unlimited storage for Shadow Copies when the Schedule is disabled, however I do not know if this was the case
Before I enabled Shadow Copies on the CSV since I did not look for this.
I now have defined a limit for Shadow Copy Storage to 320 MB on all drives and then no VHDX should be copied to System Volume Information since they are all larger than 320 MB.
Does this sound about right or am I drawing the wrong conclusions?
Limits for Shadow Copies:
Below we list the limits for our two hosts:
"Primary Host":
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
   For volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (91%)
Shadow Copy Storage association
   For volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
   Shadow Copy Storage volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (0%)
Shadow Copy Storage association
   For volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
   Shadow Copy Storage volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (3%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 320 MB (0%)
C:\>cd \ClusterStorage\Volume1
Secondary host:
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
   For volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 35,0 MB (10%)
Shadow Copy Storage association
   For volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
   Shadow Copy Storage volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 27,3 GB (10%)
Shadow Copy Storage association
   For volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
   Shadow Copy Storage volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
   Used Shadow Copy Storage space: 0 bytes (0%)
   Allocated Shadow Copy Storage space: 0 bytes (0%)
   Maximum Shadow Copy Storage space: 6,80 GB (10%)
C:\>
There is something strange about the limits on the Secondary host!
I have not in any way changed the settings on the Secondary host and as you can see, the Secondary host has a maximum limit of only 35 MB storage on the CSV, but it also shows that this is 10% of the Volume. This is clearly not the case since 10% if 600
GB = 60 GB!
The question is, why does it by default set a too small limit (i.e. < 320 MB) on the CSV and is this the cause of the problem? I.e. is the limit ignored since it is smaller than the smallest amount you can provide using the GUI?
Is the default 35 MB maximum Shadow Copy limit a bug, or is there any logical reason for setting a limit that according to the GUI is too small?

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Windows Server 2012 Hyper-V network latencies

Hi All,
I have an issue with our Windows Server 2012 Hyper-V hosts that I can't seem to figure out. Situation:
2 x Dell PowerEdge R815 servers with AMD opteron 6376 16 core CPU's and 128 GB RAM running Windows Server 2012 with Hyper-V.
2 virtual machines running on the same physical host and connected to the same virtual switch show high TCP connection latencies. One virtual machines runs a SQL Server 2012 database instance and a Dynamics AX 2012 R2 instance. The other machine a
SharePoint 2013 instance and the AX client. We see latencies of 20ms and higher on most of the TCP connections that are made from the sharepoint machine to the sql server machine.
At first I thought it might have something to do with the physical NIC's. It turned out that VMQ wasn't correctly supported by the firmware of the Broadcom BCM5709c cards. By default this setting is enabled. Turning off the VMQ setting somewhat improved
the situation but the latencies are still at 8ms and higher.
What I don't understand is what influence enabling/disabling VMQ should have on network performance. As I understand it now virtual machines connected to the same virtual switch bypass the physical altogether. Another point is that VMQ should actually improve
performance, not decrease it.
Another question I have is about the various tcp offloading settings on the physical NIC's. After installing the new firmware and drivers from Dell most of these settings are set to disabled. The documents I have been able to find talk about Windows Server
2008, any thought how these settings relate to Windows Server 2012 and whether they should be enabled?
Thanks in advance for your time and thoughts
Kind regards,
Dennes Schuitema

Hi Denes,
Please try to update your BroadCom NIC driver version ,the newest version should be 7.8.51
For details please refer to following link :
http://www.broadcom.com/support/ethernet_nic/netxtremeii.php
Best Regards
Elton Ji
If it is not the answer , you can unmark it to continue .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2008 r2 guests blue screen on Windows 2012 R2 Hyper-V Cluster with e5 2670-v2 processors

Hello all,
We have a new hyper-v infrastructure deployed in two brand new Dell R720 Servers with 384GB of Memory and dual Intel e5 2670-v2 processors. This infrastructure is replacing an existing hyper-v 2008 R2 and all the guests are being migrated to this new cluster.
The issue we are seeing is our 2008 r2 guests blue screening ocasionally with 0x0000001a,0x0000004e or 0x00000050 bugchecks.
All this guests are configured with dynamic memory and with the integration components up to date. These same guests were running with no problems in the hyper-v 2008r2 cluster.
When searching i found this article from vmware that pretty much describes what we are facing:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2073791
Are you aware of the same problem with this kindd of hardware on windows 2012 r2 hyper-v?
Thanks!
Nuno Carvalho

Meanwhile i found this May 2014 update on the intel specification of the CPU we are using:
CA135 Incorrect Page Translation when EPT is enabled
Problem:
If EPT (Extended Page Tables) is enabled, then a complex sequence of internal processor events may result in unexpected page faults or use of incorrect page translations.
Implication:
Due to this erratum a guest may crash or experience unpredictable system behavior.
Workaround:
It is possible for the BIOS to contain a workaround for this erratum.
Status:
For the affected steppings, see the
Summary Tables of Changes.
This affects VMware as of the today update of the article i referenced in the first post, what about hyper-v?
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-v2-spec-update.pdf
Nuno Carvalho

Windows 8.1 - install windows xp in hyper-v

Ive setup hyper-v on my desktop pc (Windows 8.1 64bit) and Im trying to install windows xp. I followed these instructions
http://www.techrepublic.com/blog/windows-and-office/install-windows-xp-in-windows-8-client-hyper-v/6732/
and have the virtual machine running, seemingly ok. I have created a windows xp install disk and inseretd it into the cd drive and set the operating system to install from cd (my 'E' drive). whenever I start up the vm I get this message
'Boot failure. Reboot and select proper boot device or insert boot media in selected boot device'
The cd contains the setup for xp and it runs ok. I dont know where to go from here, as far as I can see everything is setup ok, but I cant install XP. Can anyone help ?

Hi,
First,we need to confirm the followin setting.
1.If you want to install Windows XP, we must select generation 1 virtual machines.
2.Physical CD/DVD drive setting.
Also,I suggest you install XP by ISO file to check the result.
Regards,
Kelvin hsu
TechNet Community Support

Where i click some thing on facebook a window pops up before i could right click the link in the window but now its got a dot line box around it and i cant help

when i click some thing on facebook a window pops up
before i could right click the link in the window
but now its got a dot line box around it and i cant help

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to remove a small black window that appears on the upper right corner of my iMac and covers everything behind it every time I open iPhoto?

Every time I open iPhoto on my iMac a small black window appears in the upper right of my desk top and covers everything behind it, including iPhoto. The window says "Blocked Plug-In". I cannot move it, delete it, force quit it, etc. I have quit iPhoto, but the black window remains. I have restarted and shut down the computer, but when I open iPhoto the black window comes back. I have right and left clicked on the black window, but I cannot get rid of it. How do I stop the black window from appearing on my screen?

No problem

Crystal Reports XI R2 and Window Server 2008 Hyper-V environment

Hello,
Is there any known issue that Crystal Reports XI R2 running on Window Server 2008 Hyper-V enviroment?
I tested on Development Server which is Window Server 2008 and it is working fine but when tested with another servers which are in Hyper-V enviroment and ASP.NET program keep crushing.
I got the below error on my event log:
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x03976ce8, process id 0x%9, application start time 0x%10.
Thanks,
Yin

Hi Yin,
Hyper-V I assume is the Hyper threading Intel and others enabled correct? Should not make a difference other than performance. You are still using 1 CPU so the cycles are being split between multiple programs. Not really an advantage.
Try using ProcessMonitor and search on access denied to see what is having the problem.
Other issue is CR XI R2 is not supported on windows 2008, or at least you should be running Service Pack 6 to at least get Windows 7 and Vista support, which is about the same as Windows 2008.
Go to our download page and install SP 4 full build and then SP 6. ( assuming you don't have any SP's installed ) or look in the download area and download all of the patches from SP 4 as well as the distribution files for how ever you are deploying your application.
Thank you
Don

Windows 2012 Server Remote Desktop Virtualization + Linux Clients

Hello!
I wonder if anyone could shed a little light on this.
We want to implement a Windows 2012 Server with Remote Desktop Virtualization for our office, which has around 12 users. Our company has its core apps developed in VB6.0, and those apps use MySQL as their database. We want clients to run Linux, which will
have no other function than to connect and to Windows 2012 Server and display the remote session. Users need to work as usual, as they would in a local version of a Windows Desktop.
Can this be done? If yes, is the Standard version of Windows 2012 Server the best to accomplish this?
Thank you!

Hi,
Add to Tim, you need to acquire CALs for every user (About 12 in your case).
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Client Access Licenses and Management Licenses
http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx
In addition, although AD is recommended, you can run RDS in a workgroup.
Regarding how to setup RDS on a single server, you can refer to the following:
Deploying the RDS Quick Start deployment type in Windows Server 2012 (for Session Virtualization)
http://social.technet.microsoft.com/wiki/contents/articles/10421.deploying-the-rds-quick-start-deployment-type-in-windows-server-2012-for-session-virtualization.aspx
Deploying RDS 2012 Single Server – Session Based deployment
http://ryanmangansitblog.wordpress.com/2013/03/11/deploying-rds-2012-single-server-session-based-deployment/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Jeremy Wu
TechNet Community Support

When Safari is in full screen, the window slides off screen to the right after a short period of time. How do I fix this?

When Safari is in full screen, window slides off screen to the right after a few seconds. Does not happen if Safari is not full screen. How do I fix this?

You are probably inadvertently swiping to another full-screen app. Are you using a magic trackpad? Does this happen without you touching anything?

Windows 2012 R2 Hyper-V event id's 20144 and 15130

Windows 2012 R2 Hyper-V.
After installing the May 2014 MS updates we can no longer start any of the guest VM's. When attempting to start a VM the following is logged in the event logs:
Event id 20144 from Hyper-V-VMMS "Failed to start the virtual machine XYZ' because one of the Hyper-V components is not running" and
Event id 15130 from Hyper-V-VMMS "XYZ' failed to start"
We've looked at http://support.microsoft.com/kb/2761004/en-us and as far as we see the I/O verification option in Driver Verifier is disabled.   We also uninstalled the May
2014 updates that we applied just before the problem started but this did not make a difference.
Help please.

Hi,
I don’t found the similar issue when update, but from the event id, it seems is the incompatible hardware driver, please try to update all your hardware driver and firmware.
Or you can try the following example command to confirm your Hyper-V service is running or not.
=================================================
C:\Users\Administrator>sc queryex vid
SERVICE_NAME: vid
TYPE
: 1 KERNEL_DRIVER
STATE
: 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE    : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT         : 0x0
WAIT_HINT
: 0x0
PID
: 0
FLAGS
C:\Users\Administrator>sc queryex vmbus
SERVICE_NAME: vmbus
TYPE
: 1 KERNEL_DRIVER
STATE
: 1 STOPPED
WIN32_EXIT_CODE    : 1077 (0x435)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT         : 0x0
WAIT_HINT
: 0x0
PID
: 0
C:\Users\Administrator>
===========================================
The related KB:
You cannot start Hyper-V virtual machines after you enable the I/O verification option on a Hyper-V host computer that is running Windows Server 2012 or Windows 8
http://support.microsoft.com/kb/2761004/en-us
The similar thread:
Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d7e13a44-a9c3-4cb6-b45a-6b347f32b97c/hyperv-failed-to-start-the-virtual-machine-test-because-one-of-the-hyperv-components-is-not?forum=winserverhyperv
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Live ID -service is unavailable right now....

Nokia users this problem is solved.
-open network setup app.
-touch on add APN.
-now specify your network APN there. And save it.
The problem will get solved

is not solve up till now, what can i do.... pls help me
ive reset my phone
i've reconfigure it but anytime i try to download or update any of my application it gives this error- Windows Live ID -service is unavailable right now. Please try again later
please help me

Does Windows 7 support Hyper-V Manager?

Does Windows 7 Support Hyper-V Manager?

It already does. You can get the RSAT tools from here
They include the Hyper-V manager for Windows 7.
After installing the above download, go to Windows Features in Control Panel and choose the 'Role Administration Tools'. Select Hyper-V Tools from there.

Windows VM Installation on para-virtualization platform

Hi,
Is it possible to install windows VM as a para-virtualization type,because once you select the para-virtualization type during VM creation Windows option is not listing but when it comes to full virtualzation it has that option to select it.
Server which we have currently doesn't have VT support
Regards,
Shanthakumar K

791581 wrote:
Is it possible to install windows VM as a para-virtualization typeNo. Windows can only run in Full Virtualization mode.

Windows 8.1 Hyper-V virtualization rights

Similar Messages

Maybe you are looking for