Windows 8.1/IE 11 Does Not Automatically Connect to the Internet

Windows 8.1/IE 11 Does Not Automatically Connect to the Internet
I can't find the dial and redial options anywhere.
I' m connecting through PPPOE but only manual.
I know that in windows 7/8 a program like IE9 or IE10 could connect to the internet, but now it just says that I am not connected to the internet.
How to connect automacally to the internet and how to let IE to connect automatically to the internet, and why I don't have the options for dialing and redialing like in Windows 8?
Thank You

Hi,
Sorry for my dilatory reply, what does your mean that IE dialing to connect to internet?  Did your system can connect to Internet? or just IE 11 couldn't connect to internet. you can
check your IE poxy setting in Connections of Internet options.
If you encountered any IE problem, you can try to reset IE for test to resolve this problem.
If you need further assistance on this particular issue or any other Windows related issue, let us know and we will be glad to assist you.
Roger Lu
TechNet Community Support

Similar Messages

  • TS1398 After leaving a wi-fi connection my iphone will not automatically connect to the internet via the 3G network unless I turn it off and then on again. Is there a setting that can be changed to overcome this issue?

    After leaving a wi-fi connection my iphone will not automatically connect to the internet using a mobile 3G network unless I turn my phone off and then back on again. Is there a setting that can be changed to overcome this?

    Then I'm at a loss. Mine has switched automatically from the start, favoring Wi-Fi, any of its registered networks, whenever available. Only thing I can think of is trying a Force Restart and see if that clears things up: hold down Home and Sleep till the screen goes black and a white Apple logo pops up. Release and allow it to restart.
    May be similar, when I got the i5 about 16 months ago, the local carrier was starting to roll out 4G service. The phone would regularly lose all carrier connection, voice and data. Haphazardly would reconnect when it felt like it afterwards. Initially did the Off/On dance to speed things up, but discovered that using Airplane Mode would do the same without the lengthier power cycle. After awhile, the carrier 'fessed they were having capacity issues and later the problem went away. So yours too may also be a carrier issue.

  • Wifi does not automatically connect on iMac

    When turning on my imac intermittantly the wifi internet connection does not automatically connect and when this happens i have trouble manually connecting it, resulting in me turning airport wifi on and off upto 5 times.
    I am running OSX Lion V 10.7.4.
    Any sugestions?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    old... http://docs.info.apple.com/article.html?artnum=106653
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • IPad (3rd generation) does not automatically connect to wi-fi.

    iPad (3rd generation) does not automatically connect to wi-fi.  It is fully updated to 5.1.1 but you have to manually connect after turning off and back on.  I also have an iPad 2 with the same OS but it automatically connects.  The wi-fi has no security. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone does not automatically switch off the display light when locked. How do I fix this?

    I have an iPhone 5 with iOS 8.2 software.
    My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
    The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
    I have tried restarting the phone (using home and lock button), but that did not work.
    Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
    I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
    Thank you x

    Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

  • My 5800 does not automatically connect to Bluetoot...

    Hey Folks,
    I have the following problem with my 5800 X-Press Music: I paired my Bluetooth Headset with my mobile and everything works fine. Then I accepted the question about automatic connection between headset and mobile. But when I turn the headset off and on, my mobile does not (re)connect to the headset. I did a lot of research and found a lot of topics where people says that this is a bug in the bluetooth firmware. I just upgraded my firmware to the newest version, but that did not solve it. 
    any hints and help would be appreciated, but answers from nokia officials would be the best for me!
    Thank you in advance

    It's more likely to be a bug in the bluetooth earpiece. I too have one and it does reconnect automatically when I switch it on, provided bluetooth is switched on on the phone, obviously.
    Message Edited by grschinon on 29-Jul-2009 12:14 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Wicd does not automatically connect to eth0

    Wicd works fine using my wireless network. It does not automatically connect to eth0 when I plug in a cable, but I can connect to it by pressing connect manually.
    I already have ethtool installed (do I need to run ethtool as a daemon???)

    stabele wrote:I have two maybe naive question:
    1)are you connected to wireless network before you plug in ethernet cable? If yes, than wicd does not automatically switch to wired network. Maybe you can get it done by custom scripts wicd support for each connection, but I never used this thing in wicd.
    2) do you have disabled in rc.cong interfaces you want wicd to manage INTERFACES=(!eth0 !wlan0) ?
    Thanks for your answers, 1) no I'm not connected to wireless, and 2) eth0 is disabled.
    I found out it works fine if I connect eth0 manually and then I can remove and plugin the cable all I want and it automatically connects. This is because dhcpcd is already running for eth0 so maybe I should run dhcpcd eth0 in a boot script (although I think wicd should do this).

  • Does not automatically connect to wireless network anymore

    Mac Book does not automatically connect to know networks any longer.

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • Yoga 13 does not automatically connect to Wifi at times

    My yoga 13 does not automatically connect to WIFI at times thought it has been saved to automatically connect. It will connect after I click on the WIFI icon in the desktop and then it sees the WIFI network and automatically connects to it. Though it is not a big deal it is minor inconvenience that I have to click that icon at times when internet doesn't work. This shouldn't be the case for a laptop that retails over 1000 bucks. Any suggestions?

    This happens to me too. I haven't found a solution yet either.

  • Iphone 4 does not automatically connect to Airport WIFI from i Mac if it does it will not connect to Safari

    iPhone 4 does not automatically connect to my iMac's Airport network. When I do get connection Safari will not open on iPhone?

    Have you tried BT's Support Communities? http://community.bt.com/t5/BB-Speed-Connection-Issues/unable-to-connect-iphone-t o-BTHomeHub-Wi-Fi/td-p/1816

  • N8 Automatically Connects to the internet.

    Hi,
    My new Nokia N8 automatically connects to the internet. When I open applications that need internet connection it connects without asking. For example if I open Ovi Maps, SW update, or games that use the internet it automatically connects without asking me.
    I am using PR 1.2 with the following settings:
    Data Use in home Network: Always Ask
    Data use when abroad: Always Ask
    It never asks me it just connects. This is using my data.
    Thanks

    When you first set up N8 did you sign in to Nokia account or did it time out and you chose "Later"
    I chose later
    Presumably if you go to Menu > Settings > Connectivity > Settings > Destinations > Internet - network access point = Priority1?
    My wireless network is number 1. When im not near my wirless network other applications (such as games) automaticly use data.
    Try opening your browser > Options > Settings > General > Access point - change to "Ask when needed" and see if makes any difference.
    That is the option that I selected. It asks me when I open the browser only. Not other apps.
    In OVI Maps top right of screen does it say "Accounts" or "Hello username" tap on this > Nokia account - does it say "sign in" or "sign out"?
    "Accounts", "Sign in"
    I found an example of this:
    http://www.youtube.com/watch?v=OOro3mowj1Q
    At 11 Seconds "Network Connection" pops up. On my phone it does not. It just connects. Its not just ovi maps its everything.

  • Macbook pro keeps saying connection timeout, and it used to connect to the internet fine. what's up, why can't it find and automatically connect to the internet anymore???

    Macbook Pro keeps saying connection timeout and it used to connect to the internet fine. What's up, why can't it find and automatically connect to the internet anymore???

    Like this: https://discussions.apple.com/thread/2775868?tstart=0  ?

  • HT4061 my memory is low on my ipad and i can not stay connected to the internet.  How do I fix this problem

    My ipad will not stay connected to the internet.  the message in the settings says low memory. How do I fix this problem?

    Go to Settings > General > Usage and you will see the memory consumers.  Remove some of the big stuff.

  • My ipad has suddenly decided not to connect to the internet. My WiFi signal is strong. My PC is connected ok through the same WiFi signal. I have tried pressing the home and off buttons to get the apple logo but this makes no difference

    My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"

    I have done this and no difference
    I have just realised what has caused the problem.
    Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok

  • Ipad mini keeps telling me siri is not available, connect to the internet and i haven't asked for siri to do anything

    just got a new ipad mini. even when its just sitting idle, it will tell me that Siri is not available, connect to the internet. don't find anything in set up that speaks to sensitivity. what gives? anyone else had this issue?

    If you can't turn it off directly on the iPad via Settings > iCloud and you want to put the iPad back to factory defaults (or restore to a backup) then try recovery mode : If you can't update or restore your iPhone, iPad, or iPod touch - you will need to enter the iCloud account's id and password to reactivate the iPad.

Maybe you are looking for

  • I need to refresh Mails mailboxes

    G'day I've struck a real problem with mail. I'm trying to script it so that mail is automatically opened and printed every time a rule shifts mail to a certain mailbox. For reasons too long to explain, i need to do this as a folder action that takes

  • Trash - How long to empty?

    I wasn't sure where to log this inquiry and I hope this category will work. I dumped a few old libraries that I no longer needed on my system drive. As a result there are about 280K files to delete. The system has been processing about 200 per hour.

  • SAP business one application messaging service

    Tried to get mailer working but I am not sure if it s because of SAP business one messaging service is stuck in a starting mode.

  • Adobe Language Issue

    Goodday, I'm having the following problem with interactive forms. I've created a form using Adobe designer via NWDS with some thai character as text fields. When i do a 'PDF Preview', all came out fine. However, when i actually deploy the form, all t

  • OAS 4.0.8.2.1.a and Iplanet Directory Server

    How can I add the schema needed for OAS 4.0.8.2.1a into a Netscape Directory Server so that the OAS can create the objects needed for listener names etc?