Windows 8.1 Installation error

When trying to install windows 8.1 update I am getting an error saying the reserved drive space cant be changed. Can anyone suggest how to avoid this?

Hi,
According to your description, I would like to know if the system prompt is “We couldn't update system reserved partition”, right? If I misunderstand your true meaning, please feel free to let me know.
I think the reason is no enough free space in the system reserved partition.
Please check your system reserved partition to see if the size is 100M.
I suggest you use the command as the following article mentioned to check the result:
http://social.technet.microsoft.com/Forums/en-US/1d347ff4-4d33-4bad-8bd5-ab415dbebc6f/upgrade-from-win-8-pro-to-win-81-pro?forum=w8itprogeneral
In addition, you can also refer to the similar thread about this issue:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/we-couldnt-update-system-reserved-partition-error/0630b5e9-7913-40c4-908f-37648ddb29ef?page=2
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
denise

Hi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Envy 5640 - Windows Vista Driver Installation Error - Please Help

Hi
Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
The printer is up and running and working perfectly on our iOS and OSX Mac devices.
The PC can see and communicate with the Printer.
But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
<<
Install Failed
The software required for your printer could not be installed.
For more information click the Details button below.
DETAILS...
The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
>>
Then when DETAILS... button pressed:
<<
Installation Error
Key not valid for use is specified state.
>>
I haven't entered a key, nor a state? I'm in the UK.
Any ideas?
Thanks in advance
Dave

Hello there! Welcome to the forums @Stodgy70
I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
Here is the direct link for you to download and install the printer on Windows Vista:
HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
Please let me know the results, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

"Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support

IDES 46E with windows 2003 server Installation errors..

Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
Sreedhar

Hi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar

Windows 7 SP1 Installation Error - 0x80070002 - ERROR_FILE_NOT_FOUND

Hi,
I use Windows 7 Professional x64. I installed Readiness tool. It was completed successfuly.
CheckSUR.persist
Summary:
Seconds executed: 597
No errors detected
When I try to install Win7 Service Pack 1 (standalone installer), I get File not found error (0x80070002 - ERROR_FILE_NOT_FOUND). In CBS log, I see this error entry:
Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
I checked whether Firewall.cpl exists in SP1 or not. When SP1 installer gave error message, I didn't close SP1 window (in order to avoid cleanup). I copied
windows6.1-KB976932-X64.cab file from temporary folder which was created by SP1 installer. I extracted this cab file to new folder by 7-Zip program. I looked into this folder.
I found x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85
folder that mentioned in CBS log. Firewall.cpl file didn’t exist in this folder.
Finally, I see that Firewall.cpl file doesn’t exist in required location in SP1 standalone installer
How can I solve the problem?
Thank you
CBS Log Details:
2011-04-04 19:57:19, Info                  CBS    Exec: Staging Package: Microsoft-Windows-RemoteFX-VM-Setup-LanguagePack~31bf3856ad364e35~amd64~tr-TR~6.1.7601.17514,
Update: INF_ts_wpdmtp, PinDeployment: amd64_synth3dvsc.inf-languagepack_31bf3856ad364e35_6.1.7601.17514_tr-tr_dcea92f58067a8c3
2011-04-04 19:57:40, Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all required files. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CSI
0000000e@2011/4/4:16:57:40.453 CSI Transaction @0x1253f30 destroyed
2011-04-04 19:57:40, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Perf: Stage chain complete.
2011-04-04 19:57:40, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x80070002, failure source: Stage, start state: Resolved, target state: Staged, client id: SP Coordinater Engine
2011-04-04 19:57:40, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
2011-04-04 19:57:41, Info                  CBS    Reboot mark refs: 0
2011-04-04 19:57:41, Info                  CBS    SQM: Reporting package change for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current:
Resolved, pending: Default, start: Resolved, applicable: Installed, target: Staged, limit: Staged, hotpatch status: StillGoing, status: 0x0, failure source: Stage, reboot required: False, client id: SP Coordinater Engine, initiated offline: False, execution
sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeBegin_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457923, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
current: Resolved, original: Resolved, target: Staged, status: 0x80070002, failure source: Stage, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: stage time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457924, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    Enabling LKG boot option
2011-04-04 19:57:42, Info                  CBS    Restored system sleep block state: 0x80000000
2011-04-04 19:57:42, Info                  CBS    SPI: Error callback - 0x80070002
2011-04-04 19:57:42, Info                  CBS    Exec: Processing complete. Session: 30143207_2763256607, Package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    Failed to perform operation. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    Session: 30143207_2763256607 finalized. Reboot required: no [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::ChangeState:519)Failed to finalize CBS session to install package hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPCInstallTask::Execute:1010)Failed to install package with identity Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
hr=0x80070002

From the CheckSUR log, I find one error regarding atiilhag.inf has been fixed. Please run SFC and the update readiness tool again until the logs give the all clear.
From CBS log, I notice the following error message.
"Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SPReview. er=0x2"
I suggest booting in Safe Mode and take the ownership of the registry.
1. Click Start -> type
regedit in the search box and press Enter.
2. Navigate to the following registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup]
3. Right click
Setup folder, choose permission, add everyone account into list with full permission.
4. Click
Advanced button, select the option for Replace all child object permissions with inheritable permission form this object.
After that, reboot in Safe Mode and run Standalone installer again to check the result. If the issue persists, I think the best efficient way is in-place.
In-place upgrade
http://support.microsoft.com/kb/2255099
http://www.sevenforums.com/tutorials/3413-repair-install.html
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks & Regards
Mark Louis

Obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error

Hi,
I have installed obiee11.1.1.5.0 on windows 7 OS with 64bit,while instalation i got below attached error..after that can't able to see sample dashboard on dahsboard page but all services are up only
also i can able to login RPD in online mode,as well as Presntaion,weblogic EM,Console..
1) 1st i have installed JDK
C:\Program Files\Java\jdk1.6.0_27 and,Environmental path setted,Lookback adaptor installed,
2) SQL server 2008 installed ,RCU script are executed and RCU installed
3) weblogic server10.3.50.0 installed
4)obiee11.1.1.5.0 installed with "Software only install" option
5) then C:\Oracle\Middleware\Oracle_BI1\bin\config.bat (OBIEE confuration steps) installed that last step only i got below kind of error
Error:
http://imageshare.web.id/images/lx5kryulumzdf0mdxeg.jpg
Kindly help me on that.
THanks
Deva
http://obieeelegant.blogspot.com/

Hi,
Windows 7 Home Premium edition is not supported for installation of OBIEE Server 11.1.1.5.
Issue: 1
while installing obiee11.1.1.5.0 (software only install ) on win7 64 bit SP1 version i am getting Executing:opmnctl start coreapplication_obisch1 error at the last step
Issue 2:
OBIEE 11g Install On Windows 7 Hangs At Creating Domain Step (Doc ID 1209259.1)
Refer:http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Solution:
Please kindly refer to the Certification matrix available from :
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Windows 7 Home Premium edition is not supported for installation of OBIEE Server 11.1.1.5.
Install OBIEE 11.1.1.5 only on certified platform
ie. Windows 2003 with SP2/R2+
or Windows Server 2008 with SP1+
Window 7 is only certified as an OBIEE client.
For more Refe:SR 3-4684846891: Executing:opmnctl start coreapplication_obisch1 while installing obiee11g (11.1.1.5.0) win64bit
Alternatiove Option: Go with Virual Box in win 7
Thanks
Deva

Windows 8.1 installation Error code 0x80004005

I am trying to upgrade my windows 8 pro to 8.1 pro via the windows store but I keep getting the same error code 0x80004005.
I have tried the following:
1) Simply restart the update.
2) Clean boot
3) Safe mode but I couldn't access the store.
4) Registered the following dlls via cmd:
regsvr32 Softpub.dll
regsvr32 Wintrust.dll
regsvr32 Initpki.dll
Nothing worked!! help.

Hi,
Please perform clean boot
and try the update again. If the issue persists, help me collect the following logs.
%windir%\panther\Setupact.log
%windir%\panther\Setuperr.log
%windir%\panther\unattendGC\Setupact.log
$windows.~bt\Sources\Rollback
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mac Mini late 2012 BootCamp 5 Window 8.1 installation error "EFI Boot"

I've been trying to install Windows 8.1. I use bootcamp 5. Nothing went wrong in the processes. Until the computer reboot and came to partition seletion for booting windows intallation. it didn't let me go any further from this process. I got the message telling me that to install EFI system file, I need GPT partition table. Then, I checked my HDD on disk utility which confirms that my HDD is GPT. But somehow, in the process, it is reconised as MBR. I've tried it several times. I don't know how to fix this issue. - Is there anyone knows how to fix this?

Well, arguably bootcamp 5.0.1 does support Widows 7 or higher, there no reference anywhere that it doesn't.
I was able to fix issue by updating driver using intel audio driver. Everything works now...

My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

tools is at the top of the apple updater but dont get your hopes up

ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.

Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Windows 7 Production Premium CS4 language pack installation error + solution

Ok. Long story short...(For solution scroll all the way down)
Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
...BUT
Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
Ok. So...Questions shortly:
How to get my Production Premium installation work in Windows 7 and get back to work?
How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
EDIT:
Well...This is what I got from the error report:
Adobe After Effects CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Encore CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Flash CS4 Extension - Flash Lite LangPack Common
Error:
Error 2.
Adobe Flash CS4 Payload LangPack (en_GB)
Error:
Error 2.
Adobe Illustrator CS4 LangPack (en_GB)
Error:
Error 2.
Adobe OnLocation CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack_x64
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Soundbooth CS4 LangPack (en_GB)
Error:
Error 2.
LangPack (British) for DeviceCentral
Error:
Error 2.
Tried installing different language but it still won´t work...
Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
Any ideas anyone?
EDIT:
Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
EDIT:
SOLUTION...
Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
Hope this tip is helpful!
Now...Back to work!

WOH, just what I needed.
My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen!

Windows 7 installation error: "Apple Mobile Device" failed to start.

Towards end of recent iTunes software update on Windows 7, I had an installation error within starting services "Apple Mobile Device" failed to start, etc. Pressed IGNORE option. Appears to install but fails to load saying msvcr80.dll missing.
Any ideas. The old version of iTunes now loads ok but will not connect to my iPhone 4S. It crashes when the iPhone option is clicked.

You need to follow the instructons of tt2 in https://discussions.apple.com/thread/5822086 to straighten that out.

Trying to download iTunes on Windows Vista, get system administrator won't allow this kind of installation error. How do I get around that?

I'm trying to download iTunes on Windows Vista, get system adminstrator won't allow this kind of installation error. What should I do? It's 64-bit.

Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Windows 8.1 Installation error

Similar Messages

Maybe you are looking for