Windows 8.1 installation problems
Hello Support team,
I have an issue upgrading my system to windows 8.1. When I try it to update via the store i get the following error message:
Something happened and Windows 8.1 couldn't be installed. Please Try again. Error Code
0x80073bc3
I already contacted Microsoft first level and second level support but they could not help me. When trying to install Windows 8.1 fresh we got the following error message:
But my Windows partition C: has 90.6 Gigs of free space. Sounds enough.
Second level support found out that I don't have an entry in my msconfig boot tab page:
Not silly I think this can be fixed with the HP troubleshooting tools but then I got the following when trying to start them:
This error code I know. Its the same as in the first one. So HP support how get I an entry into my msconfig boot tab like the Microsoft level 2 support say it is needed and that I can update my laptop to windows 8.1?
Regards
Michael
I found this page on the forums at answers.microsoft.com. Towards the bottom there is someone saying they had the problem and the cause was software for a specific brand of mouse or headphones. If you are using the same type, maybe this is the cause of your issue.
0x80073BC3 - 0x40017 Error - Updating to Windows 8.1
Have you made a backup of the data on the hard drive? If you do have a your data safely backed up then you may want to try a system recovery, which will restore your notebook to its factory installation. Then try your operating system upgrade.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
When you do your upgrade to windows 8.1 though, make sure to also update the drivers for your computer to the windows 8.1 versions if required.
HP Pavilion g7-2245sg Notebook PC Drivers
It may be the fastest alternative, since you have already been trying to resolve this with Microsoft.
Let me know, and good luck.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!
Similar Messages
-
Windows 8.1 installation problem (photosmart 3180c)
When trying to install the full suite the installer says the Computer I am running does not have USB hardware nor software devices that are supported.
However the Photoshop TWAIN acquire has no trouble using the scanner in the printer. It for some reason reads the device as photosmart 3100 instead of 3180c
Now, I would like to get just the printer drivers, I have no need for the full suite either so if possible it can be left out.Hi,
You can check setupact.log and setuperr.log in c:\windows.~BT\Sources\Panther. If this folder not exit, please check setupact log in C:\Windows\Panther. You may find the reason for this problem.
You can also provide this installation log to us, we can help analyze this log together.
Roger Lu
TechNet Community Support -
I can install all other programs in this Suite including photoshop and AI ..in design...etc
But installation failed for Acrobat X pro with the following message even I tried turning off my Anti-Virus or restarted my machine to use Safe mode ....
the following is the error message:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 11 error(s), 5 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5.1 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
ERROR: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has required dependency on:
Family: InDesign
ProductName: Adobe InDesign CS5.5 Icon Handler x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Player for Embedding x64 3.1
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: Shared Technology
ProductName: Photoshop Camera Raw (64 bit)
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeCMaps x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe Linguistics CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobePDFL x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: AdobeTypeSupport x64 CS5
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has required dependency on:
Family: CoreTech
ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} has recommended dependency on:
Family: Adobe Web Suite CS5.5
ProductName: Adobe Media Encoder CS5.5 X64
MinVersion: 0.0.0.0
This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
Removing this payload from the dependency list.
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failedmy window 7 is English version, which is the same as this design Suite. I can install other programs like Photoshop which is included in this Suite, but I just can't install Acrobat X Pro...so I think it's not language problem... anything else could possibly cause this? thanks!!
-
Windows 2k3 Universal Installer Problem
Hey all,
Let me apologize if this problem has already been answered, but I wasn't able to find any other posts for the particular issue Im having.
Im trying to install 10g rel. 2 on my win 2k3 sp1 platform. When I run setup.exe I get Oracle's splash screen and then attempt to install oracle by just doing the basic installation. I also uncheck the check box to create a starter db. Finally I click "Next" and the Universal Installer just disappears and nothing ever happens. Any help is appreciated. Thanks in advance!
System Stats:
OS: Windows Server 2003
Intel P4 2.4 GHz
512 RAM
1.5 GB Virtual Memory
Java Runtime std ed 1.4.2_08
Message was edited by:
user479747Thanks for your help. I finally got it to work correctly now. I believe it was just a bad download I had of 10g. I went back and re-downloaded the db and performed the above mentioned steps from my first posting and it installed itself correctly.
As far as log files are concerned, there were never any for me to look at. During my successful install of Oracle, with the newly downloaded cd, the log files were put in C:\Program Files\Oracle\Inventory\logs. I never even saw this directory created when I did the install.
Thanks again! -
Officejet 4500 G510g-m | Windows 7 Driver Installation Problems
Hello!
I've just purchased a new Acer Aspire One 722 laptop running on Windows 7 64-bit for work and I'm having some problems getting it to play nice with the all-in-one at work. The model is an Officejet 4500 G510g-m and though I still have the CD, it seems to be of little help. Whenever I run any of the HP diagnostic tools, they attempt to download the full software suite (I assume, since it's the same 373MB package) and extract it, only to go back to step one of discovering the device and starting the download all over again.
I have tried running the Solution Center installer directly from the disk, at which point I get the 2732 error. I've uninstalled and reinstalled Flash to attempt to circumvent that error to no success. I have downloaded both the basic and the full driver suite from the HP site and attempted installation multiple times, using the scrubber in between to ensure a clean slate. I've copied the files from the CD to my computer and tried to install more directly, with exactly the same results, yet the printer continues to show up as problematic under the "Printers and Devices" window, troubleshooting which just returns me to the endless cycle of downloading a driver that seems to not want to install.
At this point, I haven't the faintest clue what's causing the problem, so I'd greatly appreciate any insights!
Thanks for your time in advance.Hey Kyramor,
If you visit this link you can find the print and scan driver without the full feature software:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3919449&
This installation via this method.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal. -
Compaq Presario 420 windows 7 os installation problem
I accidently tried to disk sanitize my laptop and the proggress is incomplete. My computer has an error "BootMgr is missing. Press Ctrl + Alt + Del to restart" when I tried to start it. I tried to put Window 7 installation disk but Expanding window files is stuck in 0% and error appears. When I try to startup repair, there's an error about Boot Manager is missing. There is also no operating system listed after I click repair your computer. I also tried the diskpart method but its no use. I tried to use bootrec /scanos but its 0
@Seyren
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
GS60 Windows 8.1 installation problem
Hello,
Two days ago I bought a msi GS60 2PE-211XPL without the system. I would like to install Windows 8.1 in UEFI mode but during installation when selecting the drive, I get a message that the installation is not possible, because partitions of both SSD and HDD disks are MBR instead of GPT. Is it possible to change the SSD from MBR into GPT before installation? I also have a question about a strange partitions 1. on both drives (size 1,9GB - image included). If I convert SSD into GPT will the partition be removed? Is there anything important on it?
Thanks in advance for your help:)Watch that, it has the solution in it to allow you to change the partitions to GPT and allow you to install.
Bear in mind that doing this will erase all data on those partitions (obviously).
I do not know what your partition setup looks like, and unfortunately I cannot read what language your screen capture shows, but I'm guessing that the small 1.7GB is an installation partition and the other is the main windows partition.
Without knowing if you have any data that you wish to be saved from those partitions, it's difficult to say. -
Windows 8.1 installation problem
i want to update my windows 8 to 8.1 but when i try to update it...its saying that ''setup couldn't start properly. Please reboot your PC and try running windows 8.1 setup again'' plz help me....:(
Hi,
In addition to above suggestion.
Since this issue can also be related to store catch file and corrupted Windows update components or security app.
Please follow these steps:
First, clear Windows store catch by search wsreset.exe, and click to run.
Second, let's reset Windows update components repair them:
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Third, please disable or even remove the security applications before reload the Windows 8.1 since it will always block the upgrade process.
If the issue still persists, please post back the %windir%\windowsupdate.log and C:\WINDOWS\PANTHER\setupact.log and C:\WINDOWS\PANTHER\setuperr.log for our research.
Kate Li
TechNet Community Support -
Installation problem on Windows 2003
Hi All,
I have installed the saprfc extension on my laptop for testing purposes.
Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
Everything works fine and I can access the SAP through the web server on my laptop without any problem.
Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
As you can see the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server I only located the librfc32.dll under the windows library.
My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
Doe anyone have any idea why?
Thanks,
RoyHi,
I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
Are you sure that in your php.ini is all OK?
Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
Lorenzo -
Windows 8.1 Installation On Mac - Got a Problem
Windows 8.1 Installation On Mac - Got a Problem
Hi everyone,
I'v researched a lot about installing Win on Mac but I still got a problem when everything seems to be fine.
I got a Macbook Pro Retina, Late 2013 with OSX Mavericks and Bootcamp 5 installed on. And for installing windows, I already got an empty 8GB USB Drive formatted as MS-DOS (FAT32). And I've prepared Windows 8.1 ISO in my Downloads folder.
During my last effort, I opened Bootcamp Assist and then Chose the options: "Create Windows 7 or later version installation disk" and "Download the latest windows support software from Apple". Then I chose my Windows 8.1 ISO location and my destination. When it finished ,I was expecting it to run windows setup. But it closed and nothing happened
When I opened BootCamp again, only the first two options were available as before and "Install or remove Windows 7 or later" wasn't.
Now ,what do I have to do exactly? (NOTE: I'm not a professional. So please answer in a simple way. )
Should I restart the Mac and Hold OPTION while booting to run Windows setup? I was thinking about it but I thought I might screw it up all. So I decided to ask it here to be sure.
Any help will be appreciated by heart!Hi Alcatrax,
I would recommend following the steps in this link in order to help you complete your installation of Boot Camp:
Boot Camp Help: Install Windows on your Mac
https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
Prepare your Mac for Windows
Boot Camp Assistant helps prepare your Mac for Windows by creating a new partition for Windows and then starting the Windows installer. Optionally, you can install Windows using an external USB drive that contains a Windows ISO image downloaded from Microsoft and Windows support software.
Important: If you’re using a portable computer, connect the power adapter before continuing.
Insert an external drive into the USB port on your Mac and keep it inserted while you install Windows and Windows support software.
Open Boot Camp Assistant, located in the Other folder in Launchpad.
Select the option to install Windows, select other options you need, then click Continue.
Here are the other options you can choose:
If you want to install Windows from an external USB drive and you have a Windows ISO image, select the option to copy the image to an external USB drive. If this option isn’t available, your Mac doesn’t support installing Windows from an external USB drive.
If you haven’t already downloaded the Windows support software for your Mac, select the option to download it. In a later step, you’ll install the Windows support software on your Windows partition.
Follow the onscreen instructions for the options you selected.
When you’re asked to create a Windows partition, specify a partition size. If you have multiple hard drives in your computer, you can select a different hard drive and create a single partition on that drive, so that the drive is solely used for Windows.
Note: You can’t resize the partition later.
If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
In a later step, you’ll format the Windows partition.
If you are using an installation disc for the 64-bit version of Windows, insert it into the optical drive in your Mac or the external optical drive. Otherwise, keep the external USB drive with the 64-bit version of Windows inserted.
Click Install.
Boot Camp Assistant creates the Windows partition, restarts your Mac, then opens the Windows installer.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Lightroom 3.2 Installation Problem on Windows 7 64-bit
Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets. -
PPStream installation problem on Windows 7
I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch -
Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- NeilHi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28080
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28443 (SSL)
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>----- -
Installation Problem Developer 6i/Oracle 8/Windows NT4 Please help.
Hi,
I am trying to install Oracle Developer 6i and Oracle 8
under Windows NT platform. I had several kind of problem. Atlast
I found the installation tips very help and followed it step by
step. Still I am facing the problem. Let me explain what i did,
step by step,
1.downloaded the Oracle forms self extract file. Unzipped. Ran
the Setup.exe.
2.This prepared for Oracle Developer installation. I selected
default path and home(d:\ORANT and home_Default). Selected
oracle forms and installed it.
3.Repeated step 2 to install reports 6i.
4.Restarted the system.
5.Created another directory d:\orantnew
6.Used the Oracle 8 CD and installed using the Autorun.Selected
different path and oracle Home this time.(D:\orantnew and
home_New).
7. Selected the Oracle Enterprise Edition option and did the
installation.Rebooted the system.
8. Did the TCP/IP changes explained in the Step (5) and Step (6)
given below in Mr.Krishna's reply.
9. Tried to start the listner by following Step (7) the listener
won't start.
10. Went ahead and copied the TNSNAMES.
Connected to SQL*Plus using Start/Program/Oracle-OracntNew using
SCOTT/TIGER and connect went thru.
Then tried "CONNECT" from form builder, won't connect. I think
the error message was some thing related to TNS..(Since I have
uninstalled all the Oracle components now i can't give the exact
error.Sorry). I would like to know if there is anything I am
doing wrong or missing out something.
Note : While uninstalling the oracle components i had problem
removing the bin directory. So I had to stop some of the
services
(OracleServiceORC1 and OracleStartORC1 from
start/controlpanel/services option) in order to delete the
oracle components.
Please someone let me know how can I install Oracle 8 and Oracle
Developer 6i,in windows NT platform.
Incase if i am doing anything wrong in the above given step or
missing out something pl let me know.
Thanks.
Extracted from another thread
Hi, >Try these steps, but you need to change a few things for Win2000 even I am trying, but Listener does'nt start there is a
problem I am looking into it, If you find the solution pl let me
know, these work fine on Win95/98 I have tried and they all work
fine.>-------------------------------------------->Installing
Personal Oracle 8. 1. 6. 0. 0 with Developer v6i (Reports 6. 0.
8. 8. 3, Forms 6. 0. 8. 0. 9)>On Windows 98>Note: All other
combinations may or may not work.> If you want to install
designer as well, do it now.
** Clean all Oracles off the computer using the following instructions. (Windows 95 and
Windows 98)
1. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
2. Go to HKEY_CURRENT_USER\SOFTWARE\ORACLE
3. Delete the ORACLE key.
4. Delete HKEY_LOCAL_MACHINE\SOFTWARE\ODBC pertaining to Oracle.
5. Delete HKEY_CURRENT_USER\SOFTWARE\ODBC pertaining to Oracle.
6. Edit your AUTOEXE.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path settings.
7. From the Windows Explorer (or from the command prompt), delete the Oracle Directory
(Oracle Base).
8. Delete < System_Drive > C:\Program Files\Oracle (from the Windows NT Explorer or from the command
prompt).
9. Delete Icons from < System_Drive> C:\Windows\StartMenu\Programs\Oracle - <HOME> and <System_Drive>
C:\Windows\StartMenu\Oracle Installation Products. Where<HOME>
is the previous HOME name.
10. Reboot the system.
Installing Developer 6i(Forms and Reports)
1. Download the file from OTN site or Install from the CD. Install the installer. It will go
into a new default Oracle home that it will create. When you go
to install your Developer CD, close the installer that comes up
with the CD autorun. Go to the programs menu and Oracle for
Windows 95 and click on the installer there. Once it is open,
browse to the CD you wish to install. (installr/install/us)
2. Start installer. Install Developer 6i first to default directory, Orawin95 How? Start installer, follow the prompts
that appear on the screen, you may have to do this twice, once
for Oracle Forms and once for Oracle Reports, after the
installation is successful reboot the system.
3. If you want to install Designer 6 as well, do it now. (But I have not installed
the Designer ) Designer has to be installed before PO 8. 1. 6,
because PO816 can detect only one Oracle_home.
4. Create a new folder on your root directory called Orawin98. Start the installer set-up from where you downloaded it and
select Orawin98 to install it in this time. You also need to
give this second home a name whatever you want, but through out
the process, you have to use the identical name, that is
critical. Orawin98 indicates this name in these instructions. Do
not reboot. Install Oracle 8.1.6 to the directory Orawin98 using
the installer. Reboot the system.
5. Go to Start/Setting/Control Panel/Network, if you do not have TCP/IP installed, install it
now, if you do, highlight TCP/IP, click properties. Select DNS
tab, select enable DNS, at the host area, type "Orawin98", leave
domain empty. Go to Identification Tab and enter your database
name, in this case BBM. Reboot the system after you finish.
6. Configure your database listener. Go to Start/Programs/Oracle- Orawin98/Network Admistration/Net8
Assistant, a window will pop
up, at the window expand Local and expand Listeners and double
click it, you will see a new window, go through all the tab
menus. At location address 1, Host name: use "Orawin98", Port
use: 1521 (default). And at location address 2, Host name:
use "Orawin98", Port use: 2481, go to the file/ save, close Net8
Assistant.
7. Start listener how? Go to Dos Window, type LSNRCTL, return, at LSNRCTL>, type Start. Listener should start
successfully, if not, you need to go back to Net8 Assistant to
check configuration.
8. Copy file "TNSNAMES" in directory C:\Orawin98\Net80\Admin to C:\oraein95\Net80\Admin.
9. You are finished.
10. To connect Forms/Reports/SQLPLUS to database - First start the
Listener, then start the database. Next, go to File menu in
Forms/Reports and select Connect. Type in user name and password
(system/manager or whatever) in this case it is SCOTT/TIGER and
the database name is your "DATABASENAME". When you want to quit
you need to exit from file menu of Forms/Reports, then you need
to stop Listener and then shut down database.
11. You can rename your computer name in your original name. (for local networks)
Let me know if it is working.>nullInstall Forms in one directory (You can have reports in the same
directory).
Install oracle DB in another directory.
Don't change any file and reboot.
The listener will start automatically as a service.
(If not from a command line write "lsnrctl start" to start it).
To connect from forms/report to the DB you need to activate the
sqlnet easy config tool from the directory where forms is.
Follow the wizard to define an entry in the tnsnames.ora file
automatically.
Then you can use your forms with the DB.
(IF you get problems it usually helps to let us know the error
code you get so we can direct you in the correct direction).
Maybe you are looking for
-
Ok My Itunes will no longer burn a CD. I put a blank CD in...it checks the playlist, starts to intialize...says the title of the first song, like its getting ready to start burning. Then it says "The attempt to burn a disc failed. An unknown error oc
-
How can I put report parameters and report on the same page?
I want to have a page that has user input (text fields, checkboxes, radio buttons, etc.) at the top of the page, with a submit button. When the user submits the page, I want the resulting report (returned from a query) to display below the input area
-
Reg: material cash discounts
hello friends, I understand that cash discounts taken from vendors will do settings in OBXU, OBB8. for MIGO cash discounts where we do the cash discount configuration, is that in OBYC, if so let me know the transaction we use for that. i knew that fo
-
IDOC conevrsion through ABAP mapping
Hi, I am trying to map to an IDOC MATMAS05 with an extension ZMATMAS05, using ABAP mapping. The source and target structures are external definition formats(xsd) of the IDOC.(I did this because I am using a BPM and used the xsds as abstract interface
-
Help! Existing .aif changes tempo in Logic
Newbie here. Your help is much appreciated. I have an .aif that does not contain any tempo info. When I drag it into Logic, it plays back at a much higher tempo. Changing the tempo of the song doesn't change how the .aif plays. Stumped!