Windows 8.1 is not detecting blank/recorded cds

I tried serveral ways to fix this problem but the CD/DVD rom still did not recocognize my recorded cds. movie DVD and antivirus software installation DVD work perfectly. I read some topics online and they said that windows 8 and 8.1 won't allow laptop reading/playing unlicensed CDs and DVDs, am I correct? If it is so, how can I play my recorded cd on laptop? Thanks!

Thanks for helping me!
Here is my laptop information:
HP ENVY m6-1125dx Notebook PC
Here are the results after checking three discs:
Update: Jan 17 2014
1. DVD movie
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
2. Kaspersky installation for PC
sequential read test: PASSED
random read test: PASSED
read and write compare test: The media in the drive is not te type required for tje selected test
3. blank CD
sequential read test: The selected test requires non blank media for testing
random read test: The selected test requires non blank media for testing
read and write compare test: PASSED
I already refreshed the PC but it's still so
I don't have a OS installation CD/DVD. the PC comes with the recovery partition (reinstallation and refresh PC)

Similar Messages

XL Reporter Do Not Display Blank Records

hey all,
I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02. However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account. Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected? Is this a bug?
thanks in advance!
Kevin Lee

Hi Kevin,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
Bugs should anyway be reported to SAP Support!
HTH
Frank

"Adobe Captivate could not detect a recording device ..."

Adobe Captivate shows my Snowflake USB microphone but doesn't record sound from it. When I choose Calibrate I get "Adobe Captivate could not detect a recording device". However, I can record from the microphone in all my other apps (Rosetta Stone, Sony SoundForge, etc.), so I know it's not a hardware issue.
When I go to "Sound" in Vista Pro's "Sound" option on control panel the Microphone is chosen as the default recording device, and I see the bars moving up and down when I talk.
What can I do to get "Captivate" to see the Mic?
A temporary workaround I found is to plug the Microphone into my laptop, then select SPDIF in as the input source. Captivate still gives the "... could not detect a recording device..." error, but the sound records anyway. This is kludgy, however.

Hi there
You may well just be out of luck. I heard Captivate 2 and Vista Pro used together. I don't believe Captivate was fully compliant with Vista until version 3. So that may explain things.
Unless someone pops in with a better idea, you should be able to record the audio separately, save as WAV or MP3 and import into your slides.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Windows 10 upgrade does not detect external hdmi monitor

Hi I have just upgraded my laptop yoga 2 11 to windows 10.I use an external hdmi monitor at the office desk with the previous windows 8.1 and no problems, but once I upgraded two hours ago to windows 10I my external monitor is not detected by windows10. what should i do?? Best regards, Martin

I have ENVY 15 K101TX; and I'm facing the same problem after upgrading to WIN10.Whenever I try to shut down the Laptop, it just doesn't shutdown completely. The screen goes blank but the power light and fan stays on. I have to press & hold to shut down the laptop. And we all know it's not a solution.And it also doesn't come back after sleep mode. I have to force shut down and start it again.I have checked all the power options and have tried all the things possible.Any one?

My windows 7 computer will not detect my ipod since updating both itunes and windows. I've tried downloading them again and testing the ipod on a different computer which does detect it.

My Windows 7 laptop won't detect my iPod since the last update of iTunes and Windows. I've tried downloading them again. The apple device manager has an error message.

http://support.apple.com/kb/ts1538

My windows and iTunes is not detecting to my iPod.

I'm having trouble loading my iPod onto my computer and iTunes. I reinstalled and reset several times, but it still didn't work. When I installed my iTunes with the CD, it didn't detect my iPod. When I plugged in my iPod, the wizard window popped up, and I tried to install it that way. Then while it's installing, a "Hardwar Installation" window comes up. It says, "The software you are installing for this hardware: USB Mass Storage Device has not passed Windows Logo testing to verify its compatibility with Windows XP", and I should STOP INSTALLATION. So, I do and the wizard says that I cannot install this hardware. I don't know what to do. Anybody have any ideas?

Hi, I'm having a similar problem, except I didn't get a "Windows Logo Test" thing. Anyway, if it asks you that again, just say yes. The iPod should do no harm to your computer, seeing how you've connected it before. Some people think the problem w/ this is that a windows update blocks the iPod from working.

Windows nor iTunes does not detect my iphone when I plug it in

Please help, when I first got my iphone 4, itunes and my computer can detect it. Then one day, it didn't detect it anymore. I have tried everything this website has to offer. I even called Apple tech support, and their final solution to my problem was to upgrade to Windows 7. That is BS. It use to work, but I don't know why it is not working now. I have tried all the 5 R's( reinstall, restore, ...etc), but still nothing.
Here is a list of things I have done already:
1) Reinstalled iTunes and all apple mobile software according to Apple tech support
2) was on the phone with apple tech support for close to 2 hours, when finally, they recommended I upgrade to windows 7
3) tried all USB ports in my computer with no change
4) prayed to God for guidance and strength
Please, anybody, please help me. thank you

Hi. Just go a bit further by process of elimination which you've already started. Here's a couple more things you can try.
1. Different USB cable?
2. Try plugging into another computer just to see if your iPhone will get recognised then.
If it still deosn't work then I can only assume that the handset itself has developed some kind of fault, in which case, just book a 'Genius' appointment at your local Apple store asap and get it replaced.

Windows 7 or itunes not detecting my ipod.

My ipod (5th gen) was fine working on windows vista 32bit, but i recently bought a brand new computer, operating system windows 7 premium 64bit. Tried most things, resetting ipod or using disk mode has no effect either.
Plugging my ipod in never got detected, not even as a storage device. So after installing the latest itunes software (itunes for windows 64bit) it still would not be detected by both windows in my computer and itunes.
in device manager though under disk drives it shows "apple ipod usb device".
under storage volumes it shows "unknown device"
and under USB controllers it shows "Apple mobile device USB driver"
I searched the internet before coming here, all i could find was uninstall every single bit of apple software, unplug the ipod then reinstall itunes etc, i tried all this but had bo success.
Obviously the ipod is fine as it works in my old pc and charges in this new one.
Thanks to all who can offer advice.

I've paid for support from Apple for same issue. No solution yet. It's about a month.

Windows 10 Lenovo Settings not detecting battery in Edge 15

Upgraded to Windows 10 on July 30th. No problems. My battery was showing up in conservation mode at 60% and not charging (I always use laptop plugged in). This was the setting in Windows 8.1 and still in Windows 10. All okay until tonight.
Tonight my battery is showing 100% charged and it's no longer in conservation mode. I opened the new Lenovo Settings for Windows 10 and clicked on Power. It is showing “No Battery Installed.” I unplugged the laptop and it is running just fine on the battery. I want to put it back in conservation mode but I cannot because Windows 10 Lenovo Settings isn’t detecting the battery even though it is working fine. This article explains what I should be seeing: http://www.improdia.com/tech-tips/lenovo-battery-conservation-windows-10/, I don’t know how to solve this problem and would appreciate any help. Thanks.

Hi Chaka,
Welcome to Sony Community!
Have you watched those local Canadian TV online before upgrading the operating system? This is probably one of the issues of Windows 10 but I cannot confirm that yet since Sony is still testing Vaio computer and updating the drivers and software for Windows 10.
You may try to use a different computer and check if you'll get the same result. If the same then probably the issue is with the website itself.
You may also run Vaio update and Windows update then try to change again the region.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Lenovo G710 Battery not detected in Windows 8.1 64 bit

Hi there,
I have the Lenovo G710. I haven't used the battery for a while now and I use the laptop by connecting the powerlead directly to mains power outlet. I decided today to plug the battery in. The battery indicator lights up.
Windows 8.1 does not detect the battery and it states "No Battery Detected".
What i have tried:
I have installed all the latest Windows Updates and it still doesnt detect the battery.
I even installed the latest chipset drivers for this laptop and it still doesnt detect it. The only update i cannot install is the BIOS update because it states that "Battery Not Detected".
I uninstalled the following from Device Manager: Microsoft ACPI compliant Control Method Battery. Switched off the laptopRemoved the battery packRemoved the AC power lead from the laptopHeld the power button for 30 seconds to drain the batteryReconnect the battery packReconnect the AC power leadTurn the laptop on.Battery not detected.
Can anyone assist what i could do next please?

bump!

Windows 8.1(64-bit) not detecting hp laserjet printer 1320

I recently replaced windows 7(64-bit) hp pc with windows 8.1 (64-bit) hp pc . Hp laserjet 1320 printer was working fine with Windows 7 but windows 8.1 is not detecting hp printer . Neither detecting in device manager nor in found new hardware wizard. As
i attach / removed USB Printer from pc a voice (dumm) comes from speaker but not show in device manager. Pls help..............

find the correct driver from HP site
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=410624&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4158%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
first thing try to update your chipset, isolate cable or port issue, and follow this instruction for basic TS regarding printer issue
http://windows.microsoft.com/en-CA/windows/printer-problems-in-windows-help#fix-printer-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
share with us what step you've done and the result

Just got second hand iphone4s. Tried to connect to iTunes on laptop running windows 8.1. Does not detect iPhone, iPod or iPad. Can anyone help please?

Just got a second hand iPhone 4s and tried to connect to iTunes on laptop running windows 8.1 does not detect iPhone, iPad or iPod. Can any help please? iPhone is version 7.1 and running latest itunes

Hello HungryHoover,
It sounds like you are not able to see any iOS devices in iTunes on your PC. I recommend the following article to help you troubleshoot that named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Regards,
Sterling

Access Connections Windows 7 Not detecting port

hey everyone, been having this issue where a windows 7 machine does not detect a local lan port when docked in thus not switching off wireless and onto the LAN. I've been running all of the other XP machines and it appears that they detect and ask which location they are. All of the machines don't have gateways on them. is there a way to get the windows 7 machines to detect and switch over without using a gateway?
Thanks

Hi, yesterday i talked to HP customer support executive and he provide me following link : http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_147188_1&swEnvOid=4063# After installing the driver the issue was same but at night when i was surfing internet using LAN cable all of sudden i saw "Device Driver Installation" notification at right down corner of my laptop. I was using LAN cable since my Wifi was creating problems. After that i opened device manager and i was shocked because all network driver including bluetooth, wifi are there in network adapter tab. I reboot my laptop more then 10 times and i observed wifi is working fine. I am not getting why my laptop behaving so random.

Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1
We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD
But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive
https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg
i too test with lasted version of this driver (old F6 in boot to locate hdd driver)
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip
and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1
But always the drive CRUCIAL is not reconized by the boot instalation of windows
The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.
any help?
Thanks

Hi
Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?
I think the additional driver installation while setup procedure isnt necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).
How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?
Feedback would be appreciated.

K7T TURBO2 not detecting either HD (both WD)

Here's my problem...
I start my computer and it will not load Windows because it does not detect a bootable drive.
My motherboard detects both CDROM drives but does not detect either hard drive. I have the jumper settings on the HD's correct (Master - end of IDE cable, Slave - middle of IDE cable), plugged into IDE Slot 1 (using IDE cable). I've tried the following:
Setting all available jumper settings (Master/Slave)
Using only 1 HD at a time set to Master (removed other HD off cable)
Remove IDE2 (attached to CDROM drives) cable... MB detected no drives(!)
Using a different IDE cable (in case other one was bad).
The BIOS displays the correct CPU speed, RAM and CDROM drives, but it will not detect either HD. I am almost positive that I have everything setup correctly, I've successfully built my own system half a dozen times. It just seems that there is a setting or jumper somewhere that I'm missing (I removed the J17 jumper).
Could the problem lie elsewhere and the result is what I'm seeing with no detection of my HD's? It doesn't seem like my RAM would be the problem, as the system boots up fine, detects all attached RAM, but doesn't detect a bootable drive.
Here's my system...
MB: K7T TURBO2
HD#1: WD Caviar AC310200 (10GB) UATA/66
HD#2: WD Caviar WB300BB (30GB) UATA/100
CDROM#1: Samsung 52x
CDROM#2: TDK 48/24/48 CDR/W
FLOPPY: Generic 1.44 3.5'''
CPU: Athlon XP 1500 (Good heatsink/fan)
RAM: 256 PC133 (Generic)/128 PC133 (Crucial)/128 PC133 (Crucial) = 512 PC133 Total
VIDEO: Hercules 3D Prophet 4000XT
SOUND: None (using built-in on MB)
NIC: D-Link 10/100
PSU: 400W COMPUSA Brand
One last note...
I used all of this hardware (MINUS THE K7T MB) in a previous system and everything worked fine together. My previous MB was a K7S5A and the reason I replaced it with the K7T TURBO2 is because I wanted a better board with more features.
I hope I've given enough details to my problem. I appreciate any help given, thank you and if you have any questions for me, I'll be checking this post often so ask away! THANKS AGAIN!!
- Aaron

I'm very close to buying another board, but the problem is, there are no other boards at my computer store that I can use. If there were I'd try one of them in a heartbeat.
I guess I could buy another board online, but my job is dependant upon my computer working, I can't wait a week while a new motherboard is shipped to me.
I know the problem is not with my board because this is the second K7T I've tried and both gave me the same error. The problem must be with a setting/jumper/other hardware component.
I've tried every Jumper combination possible, still no detection.
The exact error when my BIOS attempts to find a bootable drive (a HD to load Windows) is:
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER

Windows 8.1 is not detecting blank/recorded cds

Similar Messages

Maybe you are looking for