Windows 8.1 joining domain

Fails to join domain with error:
Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\WINDOWS\debug\dcdiag.txt.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "hali88.org":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.hali88.org
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
10.10.10.1
- One or more of the following zones do not include delegation to its child zone:
hali88.org
org
. (the root zone
Joining domain with Windows 7 64bit works fine.

WIN7
Windows IP Configuration
   Host Name . . . . . . . . . . . . : HP-AST0000467
   Primary Dns Suffix  . . . . . . . : hali88.org
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : hali88.org
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix  . : hali88.org
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : 6C-3B-E5-30-4F-6A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::b811:b004:6a95:1628%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.164(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Monday, March 17, 2014 9:40:49 AM
   Lease Expires . . . . . . . . . . : Tuesday, March 25, 2014 9:40:51 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.65
   DHCPv6 IAID . . . . . . . . . . . : 275528677
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-E0-0E-D7-6C-3B-E5-30-4F-6A
   DNS Servers . . . . . . . . . . . : 192.168.1.65
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.hali88.org:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : hali88.org
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
WIN81
Windows IP Configuration
   Host Name . . . . . . . . . . . . : AST0000466
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
   Physical Address. . . . . . . . . : 1A-D2-24-31-BD-CC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 48-D2-24-32-03-86
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Qualcomm Atheros AR8162/8166/8168 PCI-E Fast Ethernet Controller (NDIS 6.30)
   Physical Address. . . . . . . . . : 00-8C-FA-6C-5A-43
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::9578:3910:989:e14d%4(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.10.10.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Monday, March 17, 2014 6:46:24 AM
   Lease Expires . . . . . . . . . . : Tuesday, March 18, 2014 6:46:24 AM
   Default Gateway . . . . . . . . . : 10.10.10.1
   DHCP Server . . . . . . . . . . . : 10.10.10.1
   DHCPv6 IAID . . . . . . . . . . . : 251694330
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-A6-E2-6D-00-8C-FA-6C-5A-43
   DNS Servers . . . . . . . . . . . : 10.10.10.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wi-Fi:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Qualcomm Atheros AR956x Wireless Network Adapter
   Physical Address. . . . . . . . . : 48-D2-24-31-BD-CC
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{3137AE13-57A6-47D2-9B53-D70D67F464FC}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 2:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:34e3:39b1:b49c:ea41(Preferred)
   Link-local IPv6 Address . . . . . : fe80::34e3:39b1:b49c:ea41%9(Preferred)
   Default Gateway . . . . . . . . . : ::
   DHCPv6 IAID . . . . . . . . . . . : 150994944
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-A6-E2-6D-00-8C-FA-6C-5A-43
   NetBIOS over Tcpip. . . . . . . . : Disabled
NSLOOKUP:
WIN7 SYSTEM:
Default Server: haliserv2.hali88.org
Address: 192.168.1.65
WIN81 system:
DNS request timed out
Default server: Unknown
Address: 10.10.10.1
Active Directory entries verified.
AST0000466
User and password verified.
DCDIAG WIN81
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "haliserv2.hali88.org":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.haliserv2.hali88.org
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured
to use DNS servers with the following IP addresses:
10.10.10.1
- One or more of the following zones do not include delegation to its child zone:
haliserv2.hali88.org
hali88.org
org
. (the root zone)

Similar Messages

  • Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

    Hi,
    Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
    DC:windows Server 2008 R2
    Domain functional level:Windows Server 2003
    When Winxp join domain, have no this error message.
    I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
    There have 3 suggestion in this article:
    1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
    Doesnt's work.
    2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
    On my DC, I run netstat -an, reslut as below:
     UDP    192.168.20.3:137       *:*
    3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
    We are not using IPV6.
    This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
    Please help to check this issue.
    Thank you very much.
    BR
    Guo YingHui 

    Hi Guo Ying,
    I have faced this critical error which makes over-writes the host names in the domain when you join.
    For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
    When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
    Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
    Final Resolution is as follows:
    You need to start the dns console on the DC & drop down the domain name.
    Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
    You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
    After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
    Regards
    Anand S
    Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

  • Windows 8.1 Pro has error while joining domain, while windows 7 pro has no problem to join in the same network

    I am having the same issue as posted in http://social.technet.microsoft.com/Forums/windows/en-US/6ea57e5f-6e9d-49bd-9dd7-832ea84c0276/windows-81-pro-will-not-join-domain?forum=w8itpronetworking
    There are a few other people have the same issues.  However there was no real solution provided although the post was marked as answered.  I am posting it here again and hopefully I can get some help to solve this issue.
    We got two new PCs, one with windows 7 and the other with windows 8.1 Pro.  In the same network with domain, the windows 7 pc has no problem at all to join the domain.  However the windows 8.1 Pro won't join the domain. On the windows 8.1 Pro computer,
    I can ping the other computers in the network.  The error message says:
    An Active Directory Domain Controller (AD DC) for the domain "cmi" could not be contacted. ...
    In my case, the domain name is "CMI".  I am sure the DNS setting is correct.  What did I do wrong?  Any help is greatly appreciated.  Thanks.

    I tried the solution in that article.
    In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters folder, there is no
    NeutralizeNT4Emulator.  So I followed the instructions and created one, and set the value to 1. Then I restarted the computer and tried to join the domain again.  I got the same error.  Below is more from the netsetup log file:
    06/04/2014 21:36:37:256 -----------------------------------------------------------------
    06/04/2014 21:36:37:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 1 name
    06/04/2014 21:36:40:256 NetpCheckNetBiosNameNotInUse for 'XPS8700' [MACHINE] returned 0x0
    06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 1
    06/04/2014 21:36:40:256 -----------------------------------------------------------------
    06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 5 name
    06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 5
    06/04/2014 21:36:40:256 -----------------------------------------------------------------
    06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'cmi' is valid as type 3 name
    06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid for cmi returned 0x54b, last error is 0x0
    06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid [ Exists ] for 'cmi' returned 0x54b
    ----------------below is the error message from the pop up window
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "cmi" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "cmi":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.cmi
    The following domain controllers were identified by the query:
    cmi-dc2.cmi
    cmi-dc1.cmi
    However no domain controllers could be contacted.
    Thanks.

  • Windows 7 not joining to domain with SCCM OSD Task sequence

    Iam having trouble with Windows 7 deployment through SCCM, where the systems dont get joined to the domain if the system name is not already present in the AD.
    If I have the system name already in AD it works fine also Iam able to join the system to the domain with the same account Iam using in SCCM TS for domain join.
    Searched around and not able to find a resolution. I checked the setupact.log and found the follwoing messages.
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Begin
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Loading input parameters...
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: AccountData = [NULL]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: UnsecureJoin = [NULL]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: MachinePassword = [secret not logged]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: JoinDomain = [xposure.com]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: JoinWorkgroup = [NULL]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Domain = [xposure]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Username = [domain.join]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Password = [secret not logged]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: MachineObjectOU = [CN=Computers,DC=Xposure,DC=com]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: DebugJoin = [NULL]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: DebugJoinOnlyOnThisError = [NULL]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Checking that auto start services have started.
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Joining domain [xposure.com]...
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Calling DsGetDcName for xposure.com...
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: DsGetDcName returned [NJYAD01.xposure.com]
    2011-01-03 21:00:31, Info                         [DJOIN.EXE] Unattended Join: Constructed domain parameter [xposure.com\NJYAD01.xposure.com]
    2011-01-03 21:00:35, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:00:40, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:00:46, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:00:51, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:00:56, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:02, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:07, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:12, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:17, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:23, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:28, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:34, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:39, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:44, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:49, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:01:55, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:00, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:05, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:10, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:16, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:21, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:26, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:32, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:37, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:42, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:48, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:53, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:02:58, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:04, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:09, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:14, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:20, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:25, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:30, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:35, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:41, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:46, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:51, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:03:56, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:02, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:07, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:12, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:17, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:23, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:28, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:33, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:39, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:44, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:49, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:04:55, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:00, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:05, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:10, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:15, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:21, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:26, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:32, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:37, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:42, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:48, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:53, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:05:58, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:04, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:09, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:14, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:20, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:25, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:30, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:35, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:41, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:46, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:51, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:06:57, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:02, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:08, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:13, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:18, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:24, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:29, Warning                      [DJOIN.EXE] Unattended Join: NetJoinDomain attempt failed: 0x2, will retry in 5 seconds...
    2011-01-03 21:07:34, Error                        [DJOIN.EXE] Unattended Join: NetJoinDomain failed error code is [2]
    2011-01-03 21:07:34, Error                        [DJOIN.EXE] Unattended Join: Unable to join; gdwError = 0x2
    2011-01-03 21:07:34, Info                         [DJOIN.EXE] Unattended Join: Exit, returning 0x0
    Any help is much appreciated. Thanks

    It is possible.  You could do this with either a script or Task Sequence steps.  If you go the TS route, use 'Set Task Sequence Variable' and set the MachineObjectOU variable equal to OU=ABC,DC=Contoso,DC=COM or whatever with the condition (on
    the Options tab for the Step) Select * from Win32_ComputerSystem WHERE Name LIKE 'ABC%' 
    And that should do it for you.
    If this post was helpful, please vote up or 'Mark as Answer'! More of this sort of thing at www.foxdeploy.com

  • Can A Windows 2000 Client Join A Windows 2012 Domain ?

    I have set up a Server 2012 VM that I have configured as a DC.  The desktop environment consists of Windows 7, Windows XP and a few Windows 2000 machines.  All desktops can JOIN the 2012 domain, but when I try to add domain users to any of the
    Windows 2000 (SP4) workstations, it fails with the error "The trust relationship between this workstation and the primary domain failed".
    Unjoining the workstation from the domain (or going into ADUC and deleting the Win 2000 computer from the domain) and trying again yields the same result.  I do not have this problem when the Windows 2000 machines are joined to a Server 2008 R2 domain.
    At this point, I'm leaning towards setting it up as a 2008 R2 DC, and moving to a 2012 DC once we have weaned ourselves off of the Windows 2000 desktops.  Is there any hope of getting things to work with a 2012 DC from the start ?

    Hi,
    Based on my research, Windows 2000 client is not supported for Windows 2012 DC.
    Windows client and Windows Server operating systems that are supported to join Windows Server 2012 domains
    The following Windows client and Windows Server operating systems are supported for domain member computers with domain controllers that run Windows Server 2012:
    Client operating systems: Windows 8, Windows 7, Windows Vista, Windows XP
    Computers that run Windows 8 are also able to join domains that have domain controllers that run earlier version of Windows Server, including Windows Server 2003 or later. In this case however, some Windows 8 features may require additional configuration or
    may not be available. For more information about those features and other recommendations for managing Windows 8 clients in downlevel domains, see
    Running Windows 8 member computers in Windows Server 2003 domains.
    Server operating systems: Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003 R2, Windows Server 2003
    Cataleya Li
    TechNet Community Support

  • OVM Server takes long time to boot up - gets stuck for minutes after joining domain

    Server takes a long time to reboot. Seems to get stuck for 8-10 minutes every time after joining domain.
    See below extract from /var/log/messages:-
    Feb 1 16:39:49 svrshir441 kernel: OCFS2 1.8.0
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000E5144BF336A244A4 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,4) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB00000500000328DE591E03F0DB ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,2) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB000005000024F2772BB88DAA6A ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,5) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B8721C8850D2C515 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,1) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000EE77A2D3C8C7383B ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,0) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B96BA1B4B79D765E ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,3) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain ovm ( 0 1 2 ) 3 nodes
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_BRM_status_show: BRM attribute is only forwarpdrive
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_size_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: qla2xxx [0000:30:00.0]-1020:7: **** Failed mbx[0]=4006
    No idea why it seems to pause for 8 minutes.

    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:270) Trying to mount /dev/mapper/360080e500036115200000b315294458d to /poolfsmnt/0004fb00000
    50000e5144bf336a244a4
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:295) /dev/mapper/360080e500036115200000b315294458d mounted to /poolfsmnt/0004fb0000050000e51
    44bf336a244a4
    [2015-02-01 16:38:24 10441] INFO (notificationserver:213) NOTIFICATION SERVER STARTED
    [2015-02-01 16:38:24 10443] INFO (remaster:140) REMASTER SERVER STARTED
    [2015-02-01 16:38:24 10444] INFO (monitor:23) MONITOR SERVER STARTED
    [2015-02-01 16:38:24 10447] INFO (ha:89) HA SERVER STARTED
    [2015-02-01 16:38:24 10448] INFO (stats:26) STAT SERVER STARTED
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:307) Oracle VM Agent XMLRPC Server started.
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:316) Oracle VM Server version: {'release': '3.2.8', 'date': '201404161506', 'build': '736'}
    , hostname: svrshir441, ip: 10.90.17.41
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdb-7:0:0:0 (unde
    f:0x20470080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdh-9:0:0:0 (acti
    ve:0x20460080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdd-7:0:0:2 (unde
    f:0x20470080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdj-9:0:0:2 (acti
    ve:0x20460080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdf-7:0:0:4 (unde
    f:0x20470080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdl-9:0:0:4 (acti
    ve:0x20460080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdc-7:0:0:1 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdi-9:0:0:1 (unde
    f:0x20460080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sde-7:0:0:3 (acti
    ve:0x20470080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdk-9:0:0:3 (unde
    f:0x20460080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdg-7:0:0:5 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdm-9:0:0:5 (unde
    f:0x20460080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-5 (360080e5000
    36115200000b39529448ba)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-1 (360080e5000
    36115200000b36529447cb)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-0 (360080e5000
    37683a00000b1652944694)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-2 (360080e5000
    37683a00000b18529448bf)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-3 (360080e5000
    37683a00000b1a529449ac)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-4 (360080e5000
    36115200000b315294458d)
    [2015-02-01 16:38:29 10444] DEBUG (monitor:36) Cluster state changed from [Unknown] to [DLM_Ready]
    [2015-02-01 16:38:29 10444] INFO (notification:47) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [D
    LM_Ready]
    [2015-02-01 16:38:29 10441] INFO (notificationserver:139) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Unkn
    own] to [DLM_Ready]
    [2015-02-01 16:38:33 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:33 {NETWORK} net : ADD : eth4 (1)
    [2015-02-01 16:38:36 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:36 {NETWORK} net : ADD : eth5 (1)
    [2015-02-01 16:38:39 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:39 {NETWORK} net : ADD : eth6 (0)
    [2015-02-01 16:38:42 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:42 {NETWORK} net : ADD : eth7 (1)
    [2015-02-01 16:38:45 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:45 {NETWORK} net : ADD : eth0 (1)
    [2015-02-01 16:38:48 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:48 {NETWORK} net : ADD : eth1 (1)
    [2015-02-01 16:38:51 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:51 {NETWORK} net : ADD : eth2 (0)
    [2015-02-01 16:38:54 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:54 {NETWORK} net : ADD : eth3 (1)
    [2015-02-01 16:38:57 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:57 {NETWORK} net : ADD : bond0 (1)
    [2015-02-01 16:39:00 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:00 {NETWORK} net : ADD : bond1 (1)
    [2015-02-01 16:39:03 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:03 {NETWORK} net : ADD : bond1.590 (1)
    [2015-02-01 16:39:06 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:06 {NETWORK} net : ADD : bond1.90 (1)
    [2015-02-01 16:40:56 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) None&c=8&s=
    1422808694292&lb=p&t=2&p=%3Ccom.oracle.odof.OdofIdentifier%3E%3Clong%3E943%3C%2Flong%3E%3C%2Fcom.oracle.odof.OdofIdentifier%3E%2Ccom
    pareTo%2Cjava.lang.Object%2CNone%2C5'
    [2015-02-01 16:41:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:47 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] INFO (notificationserver:276) Service stopped.
    [2015-02-01 16:42:26 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:42:29 10441] ERROR (notificationserver:244) Error initializing notification server: 'Invalid URL Request (send) https
    ://10.90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1
    767abc'
    [2015-02-01 16:42:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:42:59 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:46 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:53 11242] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:44:54 11242] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:45:03 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call start: get_api_version
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call complete: get_api_version
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:47:22 11470] DEBUG (service:76) call start: discover_hardware
    [2015-02-01 16:47:23 11470] DEBUG (service:76) call complete: discover_hardware
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call start: discover_storage_plugins
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call complete: discover_storage_plugins
    [2015-02-01 16:47:24 11501] DEBUG (service:74) call start: discover_physical_luns('',)
    [2015-02-01 16:47:25 11501] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:25 11523] DEBUG (service:74) call start: discover_physical_luns('360080e500036115200000b315294458d 360080e50003611
    5200000b36529447cb 360080e500037683a00000b1652944694 360080e500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e5000
    36115200000b315294458d 360080e500037683a00000b1a529449ac 360080e500036115200000b36529447cb 360080e500037683a00000b1652944694 360080e
    500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e500037683a00000b1a529449ac',)
    [2015-02-01 16:47:25 11523] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call start: discover_repository_db
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call complete: discover_repository_db
    [2015-02-01 16:47:26 11546] DEBUG (service:74) call start: storage_plugin_listMountPoints('oracle.ocfs2.OCFS2.OCFS2Plugin', {'status
    ': '', 'admin_user': '', 'admin_host': '', 'uuid': '0004fb000009000090ee9ab5a5966c67', 'total_sz': 0, 'admin_passwd': '******', 'fre
    e_sz': 0, 'name': '0004fb000009000090ee9ab5a5966c67', 'access_host': '', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': []
    , 'used_sz': 0, 'storage_desc': ''})
    [2015-02-01 16:47:26 11546] INFO (storageplugin:109) storage_plugin_listMountPoints(oracle.ocfs2.OCFS2.OCFS2Plugin)
    [2015-02-01 16:47:27 11546] DEBUG (service:76) call complete: storage_plugin_listMountPoints
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call start: get_yum_config
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call complete: get_yum_config
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call start: discover_cluster
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call complete: discover_cluster
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:48:53 11704] DEBUG (service:74) async call start: start_vm('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff93
    af0676e8c83')
    [2015-02-01 16:48:53 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {START
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {VNC}
    5900
    [2015-02-01 16:48:54 11706] DEBUG (base:269) async call complete: func: start_vm pid: 11706 status: 0 output:
    [2015-02-01 16:48:54 11706] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:55 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLVNC} 6
    900
    [2015-02-01 16:48:55 11958] DEBUG (service:74) call start: configure_vm_ha('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff9
    3af0676e8c83', True)
    [2015-02-01 16:48:56 11958] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:48:56 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLTTY} 7
    900
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:50:01 12076] DEBUG (service:74) async call start: start_vm('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d7
    ad27e9d7b63')
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {START
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VNC}
    5901
    [2015-02-01 16:50:02 12078] DEBUG (base:269) async call complete: func: start_vm pid: 12078 status: 0 output:
    [2015-02-01 16:50:02 12078] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLVNC} 6
    901
    [2015-02-01 16:50:04 12516] DEBUG (service:74) call start: configure_vm_ha('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d
    7ad27e9d7b63', True)
    [2015-02-01 16:50:04 12516] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:50:04 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLTTY} 7
    902
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"alive","alive"
    :{"hostname":"GIS-DB-SVR1","domainName":"gloscc.gov.uk","osType":"Windows","osVersion":"Windows Server 2008 R2 Service Pack 1","kern
    elVersion":"6.1.7601.18700","arch":"AMD64","guestType":"PVHVM","guestDriverVersion":"3.2.2.0","vmapiVersion":"100"}}}}
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"IPChange","IPC
    hange":{"intrface":"Oracle VM Virtual Ethernet Adapter","mac":"0021f6000001","ipv4info":{"ipinfo":[{"address":"10.90.0.66","netmask"
    :"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]},"ipv6info":{"ipinfo":[{"address":"fe80::993f:d5f4:599d:fa4%14","netma
    sk":"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]}}}}}

  • Windows client error joining with Samba 4.2 Active Directory server

    I have a basic samba 4.2 ADC setup on CentOS 7 and I get a RPC server not available whenever I attempt to join a windows client to the domain. The smb.conf is default on created during provisioning. All indicated pre-testing seems to work as expected. The windows client finds the domain and recognizes a valid user or not but the last step of joining the domain ends with the error "Unable to join the Domain RPC server not available. Does anyone have any ideas?
    Thanks Paul 
    This topic first appeared in the Spiceworks Community

    I have a scenario for you in active directory when two passwords may be valid:
    Old passwords can also work on domain controllers that have not received replication yet from either the domain controller the password was changed on, or the PDC emulator in the domain.
    Let's take a scenario where we have a 3 site, 3 domain controller (DC) active directory: Site1 with DC1, site2 with DC2 and site3 with DC3.
    The ACS application resides in Site3 and is configured to use DC3 for authentication. We have a user "user1" with a password of "123".
    User1 decides to call the helpdesk and changes his password to "456".
    The helpdesk uses DC1 to make password changes because they are located in site1. For a period of time (based on replication, which defaults to 3 hours between sites) the 123 password and the 456 password will be
    valid.
    If the user1 user tries the "123" password it will work until DC3 receives the changed password from normal replication. If user1 tries to use 456, DC3 will flag this as a wrong password, and then check the PDC
    emulator of the domain to see if it has received a newer password. The PDC emulator will validate the login, and then trigger an immediate replication with DC3.
    Regards,
    ~JG
    Do rate helpful posts

  • Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

       Hello to all, there are two confliting articles about this topic:
       1-
    http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
    Server 2008 R2 domains". This article was updated in 2013.
       2-
    http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
    2010 and was refered by the first one.
       What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
       Regards, EEOC.

    Hi,
    I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
    We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
    http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
    So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
    However, the best method for you is make a lab to test the problem firstly.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • MS OUTLOOK PROMPT USERNAME AND PASSWORD REPEATLY WHEN WE LOGIN WINDOWS 8.1 WITH DOMAIN USER ON WINDOWS SERVER 2008R2

    Dear Sir
       My name is sandeep and i have a technical issue with MS office Outlook 2007 standard. the problem is i have windows 8.1 pro. and i have installed office 2007 standard on it. i have also joined this windows 8.1  to Domain Network(I have
    domain Server on Windows server 2008R2) now problem is that when i login with domain user on this windows 8.1 and configure my MS outlook the it prompts user name and password again and again showing error "
    Server responded -ERR access denied"  and if i login windows 8.1 with its local administrator user the all runs file then ms outlook does
    not prompt for username and password. this problem with only windows 8.1 domain login.. please suggest what to do and how this problem will be resolved..
    Regards
    sandeep Kumar

    Hi,
    Did it work correctly before when logging in with domain user account? If so, please try opening Control Panel > Credential Manager and remove the cached credential entry of the Outlook account, and then restart Outlook to test the issue again.
    See:
    https://support.microsoft.com/en-us/kb/2762344/en-us
    Please also try logging into your email account from webmail access to see if there is any error.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Join computer in Domain and how to get Internet access in Joined domain computer

    Dear System Admins,
    Actually I am new to this forum and I need help. Let me explain you my scenario. Ours is a small company and I have configured Cisco router with dedicated Public IP. So the private IP default gateway is 192.168.50.254 and DNS is 218.56.43.22 "DNS is
    given by ISP". Now what I did is I have configured IP address to server 192.168.50.1/24. Default Gateway IPv4 address 192.168.50.254 DNS 218.56.43.22 on Windows domain server computer. Internet is up on Windows Server. Also I have setup Active directory
    successfully. Now I want Windows 7 computer to Join the domain and also it should be able to access to Internet. Let me know how to configure Windows 7 network properties and how to join domain. Please explain me in simple way step by step process. Thank you.

    Dear Arnav,
    I have configured DNS as  218.56.43.22 in windows server computer which has given by our ISP and
    internet is available in  server. For users who wants top join domain. I have configured IP details are as follows. 
    1. Windows 2008 Server IP details
    192.168.50.1
    255.255.255.0
    192.168.50.254
    DNS: 218.56.43.22 <--- Given by ISP with Dedicated Public IP
    Now comes the Windows 7 computer which has to be join in domain for that how should I have to configure Network properties of Windows 7 computer? let me know. Windows 7 IP details are as fallows:
    IPV4 address 192.168.50.2
    Subnet Mask 255.255.255.0
    Default GW   192.168.50.254
    What about DNS? What should I configure in DNS box network properties  for Windows 7 user. Shall I enter Windows Server IP details 192.168.50.1 or "DNS 218.56.43.22 <----which is given by ISP" . Let me know further procedure in order
    to "Windows 7 user join the domain as well as user should be able to access the Internet. At present I have only installed active directory in  widnows 2008 server. Whats Next? please feel free to ask me. Thank you.

  • Domain Users are allowed by default to join domain

    Hi everyone !
    Recently i install Windows Server 2012 Standard
    Configure Active Directory Domain Services
    Create simple user "test1"
    then i go to windows 7 client and join domain with this "test1" user.
    and i shocked how is it possible that a simple domain user which is not a part of any domain admin or admin group and can join or rejoin domain successfully.
    Help me to get out of this how can i restrict simple domain user to join domain and why it was by default ?

    > then i go to windows 7 client and join domain with this "test1" user.
    By default, EVERY user can join up to 10 clients to the domain.
    > and i shocked how is it possible that a simple domain user which is not
     Why shocked? What's the issue when users join computers to the domain?
    > Help me to get out of this how can i restrict simple domain user to join
    > domain and why it was by default ?
    Create a GPO, link it to the domain, move it up to above "Default Domain
    Policy" and configure Computer - Policies - Windows Settings - Security
    Settings - Local Settings - User Rights Assignment: Add Workstations to
    the domain.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Apply network settings join domain issues

    I create a default task sequence in CM 2012 R2. On the apply network settings there is the option to join the domain. If I select to join to the domain, there is an account to set.  I set the account and test the account (test button right there) and
    the test to ad succeeds.
    I then apply and close the task sequence.  if you go back into the task sequence, and check the account to join domain, the password is now much longer than the original (only dots shown of course) and if I click test, the test FAILS.
    I am not sure if that is the expected behavior or the root of my issue. 
    My issue is my machines are failing to join the domain.  Under Windows\Pather\UnattendGC, I see a log file with the error, failed to join domain, error code 5 (something like that).  When I look up that error, I see it means access denied. 
    Any ideas?

    The task sequence will never show the correct length of the password for security reasons, so that's the expected behavior.
    Could you share what permissions you've given that account?
    These are the permissions that I use:
    Scope: This Object and all descendant objects
    - Create Computer Objects
    - Delete Computer Objects
    Scope: Descendant Computer Objects
    - Read All Properties
    - Write All Properties
    - Read Permissions
    - Modify Permissions
    - Change Password
    - Reset Password
    - Validated write to DNS host name
    - Validated write to services principal name
    This will work for every kind of deployment scenario that you may have to use the account in.
    Regards,
    Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

  • Exist OSDComputerName then Join Domain, if not join workgroup

    I add OSDComputerName into Unknown Computer as below 
    Right Click "Unknown Computers" and choose Properties. Open Collection Variables tab.
    Click on the yellow star to add a new variable. 
    Type OSDComputerName
    http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part_9487.html
    I created two tasks, one is join domain ,the other is join workgroup, but I don't know how to write the task sequence variable
    OSDComputerName = "" or Exist OSDComputerName or OSDComputerName = NULL???

    Nial's guide can be found here:
    http://www.windows-noob.com/forums/index.php?/topic/5542-how-can-i-easily-prompt-for-a-computer-name-in-configuration-manager-2012/
    So in short:
    Enable unknown computer support on your Distribution Point
    Add OSDComputerName -variable to 'All Unknown Computers' -collection, remove the checkmark of "Do not display this..." and do not add any value to it
    Deploy your task sequence to 'All Unknown Computers' -collection
    You will be prompted of OSDComputerName -variable during the TS
    Note that this only works for Unknown computers, those that don't show up in the console yet.

  • WDS Join Domain Error

    I have WDS setup and working fine as long as the person logging into the computer to be imaged is a "Domain Admin", but if not the automatic joining of the domain fails.  The user can then join the computer manually, so they do have rights.  There
    is something that is forcing the user to be a full Domain Admin.
    I have tried putting a different security group in the registry setting but it did not make a difference:
    HKLM\System\CurrentControlSet\Services\WDSServer\Providers\WDSPXE\Providers\BINLSVC\AutoApprove\<arch>\User
    The computer is pre-staged and works fine for a domain admin.  It all seems fine for other users, but does not join the domain.
    Does anybody know how to change this?
    Ryan

    Hi Mr Yuan Wang,
    I am having the same issue auto join domain. I am using answer file which was created through using WSIM in Win 2008 r2.
    Every thing went correct except up to the point joining the domain with domain user account(salim) i got the (The username or password is incorrect) error, here is the answer file:
    <?xml version="1.0" encoding="UTF-8"?>
    -<unattend xmlns="urn:schemas-microsoft-com:unattend">
    -<settings pass="specialize">
    -<component language="neutral" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-Shell-Setup">
    <ComputerName>PC</ComputerName>
    <ProductKey>2Y4WT-DHTBF-Q6MMK-KYK6X-VKM6G</ProductKey>
    <TimeZone>arab standard time</TimeZone>
    <RegisteredOwner>Salin</RegisteredOwner>
    <RegisteredOrganization/>
    </component>
    -<component language="neutral" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-UnattendedJoin">
    -<Identification>
    -<Credentials>
    <Domain>bintawfik,local</Domain>
    <Password>P@ssw8rd</Password>
    <Username>amjad</Username>
    </Credentials>
    <JoinDomain>bintawfik.local</JoinDomain>
    </Identification>
    </component>
    </settings>
    -<settings pass="oobeSystem">
    -<component language="neutral" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-International-Core">
    <InputLocale>en-us</InputLocale>
    <SystemLocale>en-us</SystemLocale>
    <UILanguage>en-us</UILanguage>
    <UILanguageFallback>en-us</UILanguageFallback>
    <UserLocale>en-us</UserLocale>
    </component>
    -<component language="neutral" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" versionScope="nonSxS" publicKeyToken="31bf3856ad364e35" processorArchitecture="amd64" name="Microsoft-Windows-Shell-Setup">
    -<AutoLogon>
    -<Password>
    <Value>UABAAHMAcwB3ADgAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
    <PlainText>false</PlainText>
    </Password>
    <Domain>bintawfik.local</Domain>
    <Enabled>true</Enabled>
    <LogonCount>99</LogonCount>
    <Username>Salim</Username>
    </AutoLogon>
    -<OOBE>
    <HideEULAPage>true</HideEULAPage>
    <NetworkLocation>Work</NetworkLocation>
    <ProtectYourPC>1</ProtectYourPC>
    <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
    </OOBE>
    -<UserAccounts>
    -<AdministratorPassword>
    <Value>UABAAHMAcwB3ADgAcgBkAEEAZABtAGkAbgBpAHMAdAByAGEAdABvAHIAUABhAHMAcwB3AG8AcgBkAA==</Value>
    <PlainText>false</PlainText>
    </AdministratorPassword>
    -<LocalAccounts>
    -<LocalAccount wcm:action="add">
    -<Password>
    <Value>UABAAHMAcwB3ADgAcgBkAFAAYQBzAHMAdwBvAHIAZAA=</Value>
    <PlainText>false</PlainText>
    </Password>
    <Description>Built-in Account</Description>
    <DisplayName>Admin/Power User Account</DisplayName>
    <Group>Administrators</Group>
    <Name>Test</Name>
    </LocalAccount>
    </LocalAccounts>
    -<DomainAccounts>
    -<DomainAccountList wcm:action="add">
    <Domain>bintawfik.local</Domain>
    -<DomainAccount wcm:action="add">
    <Group>Domain Users</Group>
    <Name>Salim</Name>
    </DomainAccount>
    </DomainAccountList>
    </DomainAccounts>
    </UserAccounts>
    <TimeZone>arab standard time</TimeZone>
    <RegisteredOwner>Salim</RegisteredOwner>
    </component>
    </settings>
    <cpi:offlineImage xmlns:cpi="urn:schemas-microsoft-com:cpi" cpi:source="wim://dc1/reminst/win7custom.wim#Win7_64_Ulti"/>
    </unattend>

  • Microsoft Store Breaks After Joining Domain (2008)

    After joining a Windows 8 Pro Tablet to domain, store apps are no longer working.
    This is important to us for two reasons :
    1) Users must be able to use OneNote and Photo Apps
    2) Users must be able to access Domain shares and have access to the same files as his regular workstation
    All of this regardless of what user logs in.
    Currently active COMPUTER GPO :
    Enable Offline Files
    Enable Remote Desktop
    Local Admin Group to Domain Users
    NTP Client configuration
    Trusted Zones (Local Intranet/Shared Paths)
    Currently Active USER GPO :
    Map network Drives
    Create Folder Structure at logo on server (VBS)
    Folder Redirection (Desktop and Documents to Server. Favorites, Music, pictures and Video follow Documents)
    I've tried a few tricks found on google and technet, but I seem to only regain partial and temporary access to the store. Apps will open and close immediately (Store/Camera for example).
    Any suggestions would be appreciated and thank your for your time!

    Hi,
    If this issue occurs just after joining domain, you need check this policy:
    Computer Configuration/Windows Components/Store/Turn off the Store application
    If it is not this case, we can re-register Windows Store for a test:
    Fix Store App in Windows 8.1
    http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • Data Guard Agent, Authentication Failure

    I'm working with two Windows 2003 servers, attempting to use one as a standby and one as a primary database use Data Guard. However, I'm having a bit of trouble when trying to get one server to communicate through the Management Agent and Management

  • 11.1.1.6 Column drag problem

    I did a new install of 11.1.1.6 (had some problems with the 11.1.1.5 to 11.1.1.6 upgrade) on Solaris. Then I converted the repository and catalog from 10.1.3. On existing reports when you drag a new column in the criteria pane, it does not show up. H

  • Export as MS Excel

    Hellow. I created BW Reports using level up/down. It's appeared user ID and Password popup window when excel file opened after export as ms excel in the web reports. Thers is no problem without level up/down. Would you help how pass ID/password popup

  • LDAP - find in directory - urgent

    hi, i have configured a RFC destination (connection successful) i have configured the ldpa connector. (green light) and i have logged on successfully (green light) But now i want to make a query with the find button. -> LDAP server is not active I ha

  • Configurator updating iPad's OS

    Hi Guys Has anyone else found Configurator is updating the OS on iPads that are already running the latest version? We have a number of clients running Profile Manager and Apple Configurator and in most cases if the iPad is up to date then it skips t