Windows 8.1 narrator issues
i activated the narrateur and now i can't disable it in fact i can't even go further than my lock screen i don't know how to use it is kinda weird, please if someone has the same proble or has a solution help me thank you
If you're using a touch tablet then you can probably disable Narrator by simultaneously pressing the Windows key and the Volume Up key.
Drag a single finger to hear about the items you drag over. Double tap will activate a button.
Tap three times with four fingers to review the full set of touch gestures supported by Narrator.
--Rob
Similar Messages
-
Playing to DMP100 in Windows 7 - firewall setting issue?
Hi,
I set up my DMP100 today and installed the Cisco media client and media server on my Windows 7 box - I can play to the DMP 100 just fine using that approach. But I really want to use my Windows Media Player instead and use the "Play To" feature. However when I try to do that I get an error that the media server cannot be contacted. I messed around a long time and finally figured out that turning off my Windows Firewall makes this issue go away - the "Play To" in Windows Media Player works. However I don't want to leave my firewall turned off and I can't find anything that tells me what program/port/protocol I need to create a new firewall rule for so I can turn it back on. Does anyone have any ideas about what I should do hear? It looks like the DMP is trying to call the Windows Media Server and failing to punch through the firewall. At least that's my best guess.
Thanks,
AlexHi!
Try creating exceptions on the firewall for these three applications on your computer.
WHASetup.exe
AVMediaServer.exe
CiscoMediaPlayer.exe
FAQ on firewall configuration for Wireless Home Audio Setup
Message Edited by Mared1784 on 12-27-2009 07:03 AM -
Windows Vista iPod Nano Issues
I just bought an iPod Nano 8GB today and when I tried to connect it to my Windows Vista System after installing iTunes, I get an "Add new Hardware" wizard asking me to install the driver for the iPod which obviously doesn't work.
Of course, I've tried the 5Rs several times and none of them work. Asking here is my last resort.
I know there are currently issues with Vista but clearly this isn't one of those listed under the article on the site. So I was wondering if this is only specific to my PC.
Thanks in advance to whoever who can help.try what I posted here and report back
http://discussions.apple.com/thread.jspa?messageID=9071165� -
I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-JohnI think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed". -
Windows 8.1 upgrade issues on Satellite P870 - PSPLFA
Hi there,
For better or worse over the weekend I have downloaded windows 8.1 onto a toshiba laptop (p870 PSPLFA model) that was running windows 8. Video card is NVIDIA GeForce GT 630M 2GB with Optimus + Intel HD Graphics 4000
http://www.mytoshiba.com.au/support/computers/satellite/p870/psplfa-019001/specifications
couple of issues:
(a) I am having a few problems getting windows 8.1 to work properly on this laptop and can't get/find new drivers from the toshiba website to sort out the video card properly.
Any ideas of how or when I can download video drivers that are suitable for this laptop?
Not overly keen on uninstalling and rolling back to windows 8 now that I have gone this far...
I have a call in yesterday with microsoft yesterday that seems to be going nowhere to fix a couple of other things following this upgrade.
(b) On the windows 8.1 machine my internet connection when running IE11
now seems a bit flaky and suspect this is a internet explorer 11/windows 8.1 issue (other laptops on my wireless network running windows 7 and XP are working fine and not dropping out as well as can access all the info I can't on the win 8.1 machine) which seems to be a bit of a common issues looking at some other forums and
(c) I can't download or open files from google docs (screen just freezes most of the way through the download) on the upgraded windows 8.1 machine.
Any help appreciated,
KenHi
Your notebook belongs to the PSPLFA series. This series was released in Australian
The same notebook series PSPLFE is available in Europe.
On the Toshiba EU driver page you will find all Win 8.1 update drivers
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
_Importnat:_ the Win 8.1 drivers have to be installed in the right order!
Check the installation instruction which is available in the driver list too and follow exact this order! -
Windows 7 Pro DNS issue with static IP
0
down vote
favorite
I have been unable to solve a DNS problem I am having as follows:
I have a Windows 7 Professional (64 bit) computer running VirtualBox with a couple of Windows XP guests (not sure if this bit is relevant). After heavy file copying/transfer on both of the Windows XP machines, both the guest machines AND the host loose anything
DNS related, so I cannot call anything by name, but by direct IP works fine. The only resolution is to reboot the (host) machine and it will then work OK for a while until it happens again. The only trigger to make it seem to happen quicker is to re-initiate
the heavy file transfer and this then causes the DNS resolution to stop working again.
The machine has a fixed IP address, so it isn't related to DHCP.
I've tried the machine connected wired and wireless, no difference.
The IP settings are manual and I have tried giving it the DNS settings of the router (normal settings) and I have also tried giving it Google's DNS servers (8.8.8.8 & 8.8.4.4). No difference.
It seems to happen (sooner) during heavy traffic.
Other Windows 7 machines in the network work fine (though they are Home version, not Pro).
ONLY DNS fails, direct IP works OK.
Reboot seems only solution at the moment.
I am now lost as to what to try to resolve this issue, I do not really want to reload Windows 7 as it is a relatively new install... I have read about issues with wired connections on my router (BT Home Hub 2.0) so tried a wireless connection, still the
same.
Here is my ipconfig /all (it shows the BT Home Hub router DNS settings, but it also failed with Google's 8.8.8.8 and 8.8.4.4 entered here and also with the routers 192.168.1.254 (default).
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\G>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : e1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 30-85-A9-AD-07-81
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::59f:484a:827f:42ba%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.87(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 238060969
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
DNS Servers . . . . . . . . . . . : 217.32.171.21
213.120.234.30
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-28-56
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8d2d:7418:381b:8dc0%15(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.56.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 336068647
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{486D4DCC-9CB7-417E-A796-596E0E6B1D54}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{67455999-75A5-436E-9EAC-12B093363132}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\G>
Any ideas where to look, or what other info to provide for any assistance?
Many thanks in advance.Hi,
This has just happened again, here is the content of the netstat results as requested...
If I kill the VirtualBox virtual machines, it starts working again. It is as if there are no ports left, but I am not occupying that many? Surely Windows 7 can cope with this?
I feel I am missing something important, but cannot put my finger on it...
Further below, I have re-run the netstat command AFTER I have closed the VirtualBox machines and the system works OK.
netstat results DURING ISSUE:
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:21 0.0.0.0:0 LISTENING 1444
[FileZilla Server.exe]
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING 1692
[MESMTPC.EXE]
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 0.0.0.0:110 0.0.0.0:0 LISTENING 1660
[MEPOPS.EXE]
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 752
RpcSs
[svchost.exe]
TCP 0.0.0.0:143 0.0.0.0:0 LISTENING 1524
[MEIMAPS.exe]
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 0.0.0.0:1221 0.0.0.0:0 LISTENING 4796
[VirtualBox.exe]
TCP 0.0.0.0:2199 0.0.0.0:0 LISTENING 4820
[VirtualBox.exe]
TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING 1756
[mysqld.exe]
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING 1104
CryptSvc
[svchost.exe]
TCP 0.0.0.0:6901 0.0.0.0:0 LISTENING 4636
[WinVNC.exe]
TCP 0.0.0.0:6901 0.0.0.0:0 LISTENING 4636
[WinVNC.exe]
TCP 0.0.0.0:8300 0.0.0.0:0 LISTENING 3464
[sc_serv.exe]
TCP 0.0.0.0:8301 0.0.0.0:0 LISTENING 3464
[sc_serv.exe]
TCP 0.0.0.0:8360 0.0.0.0:0 LISTENING 3080
[sc_serv.exe]
TCP 0.0.0.0:8361 0.0.0.0:0 LISTENING 3080
[sc_serv.exe]
TCP 0.0.0.0:9022 0.0.0.0:0 LISTENING 4804
[VirtualBox.exe]
TCP 0.0.0.0:9023 0.0.0.0:0 LISTENING 4804
[VirtualBox.exe]
TCP 0.0.0.0:9080 0.0.0.0:0 LISTENING 4804
[VirtualBox.exe]
TCP 0.0.0.0:10001 0.0.0.0:0 LISTENING 4828
[VirtualBox.exe]
TCP 0.0.0.0:10002 0.0.0.0:0 LISTENING 4828
[VirtualBox.exe]
TCP 0.0.0.0:10003 0.0.0.0:0 LISTENING 4828
[VirtualBox.exe]
TCP 0.0.0.0:10011 0.0.0.0:0 LISTENING 4780
[VirtualBox.exe]
TCP 0.0.0.0:10012 0.0.0.0:0 LISTENING 4780
[VirtualBox.exe]
TCP 0.0.0.0:10013 0.0.0.0:0 LISTENING 4780
[VirtualBox.exe]
TCP 0.0.0.0:25566 0.0.0.0:0 LISTENING 3648
[TerrariaServer.exe]
TCP 0.0.0.0:30001 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30002 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30003 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30004 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30005 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30006 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30007 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30020 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30021 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30039 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30080 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30081 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30082 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30083 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30084 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30085 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30086 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30087 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30088 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30089 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30090 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30091 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30092 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30093 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30094 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30095 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30096 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30097 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30098 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30099 0.0.0.0:0 LISTENING 4788
[VirtualBox.exe]
TCP 0.0.0.0:30101 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30102 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30103 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30104 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30105 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30106 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30107 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30108 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30109 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30110 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30111 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30112 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30113 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30114 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30115 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30116 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30117 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30118 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30119 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30120 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30121 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30139 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30180 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30181 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30182 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30183 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30184 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30185 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30186 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30187 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30188 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30189 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30190 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30191 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30192 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30193 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30194 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30195 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30196 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30197 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30198 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30199 0.0.0.0:0 LISTENING 4812
[VirtualBox.exe]
TCP 0.0.0.0:30201 0.0.0.0:0 LISTENING 4796
[VirtualBox.exe]
TCP 0.0.0.0:30239 0.0.0.0:0 LISTENING 4796
[VirtualBox.exe]
TCP 0.0.0.0:33306 0.0.0.0:0 LISTENING 4796
[VirtualBox.exe]
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 440
[wininit.exe]
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 880
eventlog
[svchost.exe]
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 1000
Schedule
[svchost.exe]
TCP 0.0.0.0:49156 0.0.0.0:0 LISTENING 508
[lsass.exe]
TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING 500
[services.exe]
TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING 3048
PolicyAgent
[svchost.exe]
TCP 127.0.0.1:8361 127.0.0.1:49364 ESTABLISHED 3080
[sc_serv.exe]
TCP 127.0.0.1:14147 0.0.0.0:0 LISTENING 1444
[FileZilla Server.exe]
TCP 127.0.0.1:14147 127.0.0.1:49162 ESTABLISHED 1444
[FileZilla Server.exe]
TCP 127.0.0.1:49162 127.0.0.1:14147 ESTABLISHED 3156
[FileZilla Server Interface.exe]
TCP 127.0.0.1:49212 127.0.0.1:49213 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49213 127.0.0.1:49212 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49214 127.0.0.1:49215 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49215 127.0.0.1:49214 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49216 127.0.0.1:49217 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49217 127.0.0.1:49216 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49218 127.0.0.1:49219 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49219 127.0.0.1:49218 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49220 127.0.0.1:49221 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49221 127.0.0.1:49220 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49222 127.0.0.1:49223 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49223 127.0.0.1:49222 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49224 127.0.0.1:49225 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49225 127.0.0.1:49224 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49226 127.0.0.1:49227 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49227 127.0.0.1:49226 ESTABLISHED 4288
[java.exe]
TCP 127.0.0.1:49364 127.0.0.1:8361 ESTABLISHED 3100
[Instore_Radioboss.exe]
TCP 192.168.1.87:139 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP 192.168.1.87:3389 217.156.134.12:22971 ESTABLISHED 1104
CryptSvc
[svchost.exe]
TCP 192.168.1.87:8360 81.148.248.221:1026 ESTABLISHED 3080
[sc_serv.exe]
TCP 192.168.1.87:25565 0.0.0.0:0 LISTENING 4288
[java.exe]
TCP 192.168.1.87:50644 37.139.0.151:8233 ESTABLISHED 4796
[VirtualBox.exe]
TCP 192.168.1.87:51019 81.27.96.46:21 TIME_WAIT 0
TCP 192.168.1.87:53126 192.168.1.86:445 ESTABLISHED 4
Can not obtain ownership information
TCP 192.168.1.87:60462 192.168.1.86:445 CLOSE_WAIT 4
Can not obtain ownership information
TCP 192.168.1.87:65029 37.139.0.151:8231 ESTABLISHED 4796
[VirtualBox.exe]
TCP 192.168.56.1:139 0.0.0.0:0 LISTENING 4
Can not obtain ownership information
TCP [::]:21 [::]:0 LISTENING
1444
[FileZilla Server.exe]
TCP [::]:25 [::]:0 LISTENING
1692
[MESMTPC.EXE]
TCP [::]:80 [::]:0 LISTENING
4
Can not obtain ownership information
TCP [::]:135 [::]:0 LISTENING
752
RpcSs
[svchost.exe]
TCP [::]:445 [::]:0 LISTENING
4
Can not obtain ownership information
TCP [::]:3306 [::]:0 LISTENING
1756
[mysqld.exe]
TCP [::]:3389 [::]:0 LISTENING
1104
CryptSvc
[svchost.exe]
TCP [::]:30239 [::]:0 LISTENING
4796
[VirtualBox.exe]
TCP [::]:49152 [::]:0 LISTENING
440
[wininit.exe]
TCP [::]:49153 [::]:0 LISTENING
880
eventlog
[svchost.exe]
TCP [::]:49154 [::]:0 LISTENING
1000
Schedule
[svchost.exe]
TCP [::]:49156 [::]:0 LISTENING
508
[lsass.exe]
TCP [::]:49157 [::]:0 LISTENING
500
[services.exe]
TCP [::]:49158 [::]:0 LISTENING
3048
PolicyAgent
[svchost.exe]
TCP [::1]:14147 [::]:0 LISTENING 1444
[FileZilla Server.exe]
UDP 0.0.0.0:123 *:*
964
W32Time
[svchost.exe]
UDP 0.0.0.0:500 *:*
1000
IKEEXT
[svchost.exe]
UDP 0.0.0.0:3702 *:*
964
EventSystem
[svchost.exe]
UDP 0.0.0.0:3702 *:*
964
EventSystem
[svchost.exe]
UDP 0.0.0.0:4500 *:*
1000
IKEEXT
[svchost.exe]
UDP 0.0.0.0:5355 *:*
1104
Dnscache
[svchost.exe]
UDP 0.0.0.0:53274 *:*
4780
[VirtualBox.exe]
UDP 0.0.0.0:53727 *:*
4788
[VirtualBox.exe]
UDP 0.0.0.0:54111 *:*
4828
[VirtualBox.exe]
UDP 0.0.0.0:54112 *:*
4828
[VirtualBox.exe]
UDP 0.0.0.0:54113 *:*
4780
[VirtualBox.exe]
UDP 0.0.0.0:55421 *:*
964
EventSystem
[svchost.exe]
UDP 0.0.0.0:58596 *:*
964
EventSystem
[svchost.exe]
UDP 0.0.0.0:59838 *:*
4812
[VirtualBox.exe]
UDP 0.0.0.0:62498 *:*
4796
[VirtualBox.exe]
UDP 127.0.0.1:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP 127.0.0.1:55045 *:*
4172
SSDPSRV
[svchost.exe]
UDP 192.168.1.87:137 *:*
4
Can not obtain ownership information
UDP 192.168.1.87:138 *:*
4
Can not obtain ownership information
UDP 192.168.1.87:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP 192.168.1.87:55043 *:*
4172
SSDPSRV
[svchost.exe]
UDP 192.168.56.1:137 *:*
4
Can not obtain ownership information
UDP 192.168.56.1:138 *:*
4
Can not obtain ownership information
UDP 192.168.56.1:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP 192.168.56.1:55044 *:*
4172
SSDPSRV
[svchost.exe]
UDP [::]:123 *:*
964
W32Time
[svchost.exe]
UDP [::]:500 *:*
1000
IKEEXT
[svchost.exe]
UDP [::]:3702 *:*
964
EventSystem
[svchost.exe]
UDP [::]:3702 *:*
964
EventSystem
[svchost.exe]
UDP [::]:4500 *:*
1000
IKEEXT
[svchost.exe]
UDP [::]:5355 *:*
1104
Dnscache
[svchost.exe]
UDP [::]:55422 *:*
964
EventSystem
[svchost.exe]
UDP [::]:58597 *:*
964
EventSystem
[svchost.exe]
UDP [::1]:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP [::1]:55042 *:*
4172
SSDPSRV
[svchost.exe]
UDP [fe80::59f:484a:827f:42ba%11]:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP [fe80::59f:484a:827f:42ba%11]:55040 *:*
4172
SSDPSRV
[svchost.exe]
UDP [fe80::11a6:2283:bc40:c0cb%16]:1900 *:*
4172
SSDPSRV
[svchost.exe]
UDP [fe80::11a6:2283:bc40:c0cb%16]:55041 *:*
4172
SSDPSRV
[svchost.exe] -
Jabber for Windows - Outlook Meeting integration issue/questions
Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
MalHi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood -
Jabber for windows 9.7 photo issue
Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot! -
Windows Server 2008 R2 issues on OVS 3
I've been trying to get Windows Server 2008 R2 to work on OVS3 and been having issues.
First I tried to copy a working VM from OVS2 and it seemed to work, but it would crash whenever intensive I/O happened. I installed the OVS3 PVM drivers, hoping that would fix it, but it didn't. I moved it over to another server, thinking maybe it was a hardware issue. No luck there.
I also tried a fresh install. It boots up and when it starts to unpack the install files the VM reboots. I tried this with an NFS repository and on local disk with the same result.
Has anyone successfully installed Win2K8 Server on OVM3? Any ideas?
Thanks,
JimBoth Mem and Max Mem were set to 2048 mb, so I figured it was fine. But I changed them both to 4096 mb and now it's working. Odd.
Both the copied VM and the fresh install are working.
Thanks. -
Oracle iLearning 5.0 on Windows and email notifications issue
Hi!
We are upgrading from iLearning 4.3 to iLearning 5.0 on Windows 2000 server and I have a question related to that.
iLearning 5.0 is certified for Windows.
The accompanying release.txt states that:
--'Email', 'Email and Web' notifications options for Learner Rating and Authorized Enrollment/Unenrollment are not available on Windows platforms. Only web-based notifications should be used.
Through a Technical Assistance request (TAR Number 4439000.992 ) I've found that this problem is due to the use of Workflow 2.6.2 stand-alone which requires sendmail, which is not available on Windows.
This worries me because I want the system to be able to:
* notify admin when authorization is needed for enrollment
* notify course participants about changes or a cancelled course.
* Certification reminder and expiration
* Assessment submission
* Notification to all learners currently enrolled in an offering
The suggested workaround from Metalink is to use a Unix/linux server.
Metalink suggestion:
"you can set up a notification mailer on UNIX to work with stand-alone Workflow
hosted on Windows. The following MetaLink article is a step-by-step guide on how
to do this: Note:254973.1 How To Configure UNIX Sendmail To Work With Oracle Workflow Running On Windows
This would be useful if UNIX was an option for me. It is not.
I have some questions:
1)Can I use WorkFlow 2.6.3.5 on windows with iLearning 5.0?
I know Workflow 2.6.3.5 is working with MS Exchange.
2)Can I use sendmail in some form or shape?
IIS 5.0 (or 4.0) has a mail gateway that can be utilized by a sendmail program.
Sendmail software for windows:
http://www.glob.com.au/sendmail/
http://www.indigostar.com/sendmail.htm
http://www.ntsendmail.com/
http://www.windowsitpro.com/Windows/Article/ArticleID/5289/5289.html
Has anyone tried any of theese?
I'd like to make a suggestion to my IT department on how to solve this issue.
Thanx for any help in advance :-)
Kristian Amlie, Bergen NorwayThere are a couple of patches available that allow a customer to upgrade their Oracle iLearning database to 10g and with that, upgrade Oracle Workflow to version 2.6.3 which supports email notifications through workflow on windows.
Patch #s are 4321769 and 4485520
Thanks!
Scott -
Since an upgrade to windows 8.1, the graphics have split diagonal lines through boxes on the screen.
I have checked for driver updates, but apparently everything is up to date?
PC is a Pavilion 15 Notebook - still under warranty
Any ideas for a fix?
As well as that, the printer software is gone and the dvd player won't work.
Should I take this back to the store that sold it?Hello basslines101, welcome to the HP Forums.
I see that since updating to Win 8.1. you have a graphics issue. I will try to help you with this.
What you can do to start is a system refresh: Refresh Your PC to Resolve Problems (Windows 8).
After the refresh is completed, use the HP Support Assistant to make sure all updates for the notebook have been completed.
Let me know if this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
Windows 8.1 RDP Issues with Windows Server 2008 Standard.
I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Windows Vista major sound issues
On my 2 month old Unibody Macbook, I'm experiencing severe sound issues with bootcamp 2.1 in windows vista. While playing games such as Halo 2 or Fallout 3, which the macbook graphically handles exceptionally well for a laptop, the sound crackles and often disappears! To get the sound back I have to reboot my macbook. Help, this is extremely annoying, and apple won't do a thing about it!!! Please help!
try what I posted here and report back
http://discussions.apple.com/thread.jspa?messageID=9071165� -
Installation Server and Windows 7 - Admin Rights Issue
Here is a good one. Completely reproducible error when granting Local Admin Rights by the LSH Service.
For those with SAPGui Installation Server (SAPGui 7.20 Patch 6 or above) ... try this on a Windows 7 SP1 front end when you are NOT logged on with local admin rights.
1) Open the Windows RUN dialog
2) Type path to your installation server\setup\nwsapsetup.exe
3) You should find the install wizard starts (granting local admin rights) as expected.
NOW TRY THIS
1) Type path to your installation server\setup\nwsapsetup.exe /uninstall
2) You will find that you get a dialog about can't grant admin rights. Un-install will abort.
This only appears to happen with the /uninstall switch! Using /product= for example it will still grant admin rights.
BIZZARE ...
I've opened a Customer Support Message (Friday) priority - MEDIUM have not heard back from SAP Support yet.
BobJude,
Thanks, it looks like that note has been getting a lot of update activity lately because the newly released Patch 8 has nwsapsetup.exe as version: 8.6.1.62 and that version also has the issue with the /nnnnnn switches.
I do have to say however, that this issue with nwsapsetup.exe and admin rights (requiring SapSetup.exe_Patch) first appeared with the release of Patch 6 for the Gui. It was fixed for WinXP (I had a customer support message opened on this). So why didn't anyone also test on Win7?
Who is QA-ing these software releases?
Patch 8 had the same problem.
The change log for SapSetup.exe_Patch, is up to 8.1.6.70 now.
How are we in large enterprises to feel comfortable deploying any of this?
End of rant ....
Bob
P.S. I really appreciate your presence here ... the tech assigned to my formal Support Message on the matter still has not gotten back advising of the updated release of SapSetup.exe_Patch.
Message: 0000746888
Edited by: Bob Held on Sep 16, 2011 10:30 PM -
ImageCLASS D1120 Windows 8.1 driver issues and MF Toolbox problems
I'm having some real problems getting several imageCLASS series multifunction units to work in the windows 8.1 x64 environment. most recently, I've been working with a D1120, and I can't get it to do any more than print reliably - no scan functionality at all. I realize there are two issues here, so I'll try to break them apart as best as possible. For reference purposes, i'm running windows 8.1 on a 64-bit system. I was able to download the correct drivers and program from the canon website, and extracted them with no issue.
On the driver problem, I tried using the instructions found in this link, but windows went ahead and installed the 2009 series drivers regardless. It's connecting via USB, and doesn't give me any option to update the drivers once "installed".
On the MF Toolbox problem, I've gotten it to do one one scan job, and then it starts throwing a variety of error messages at me. First, it will say there is a data transfer error. Then it will say there are no documents in the queue. Then it will simply lock up and not start the scan job at all. I tried using the instructions in this link, but didn't get anywhere.
Any way you can help on one or both of these issues? I have a feeling they are related somehow...
ZHi merliner.
I will be glad to assist you.
The drivers may not be installed correctly because the Windows operating system is automatically installing the driver. First, we will need to disconnect the printer from the computer and uninstall the drivers. Since the drivers are being installed by the Windows system, I recommend uninstalling the drivers from the 'Print Server Properties' window. Please follow the instructions below:
1. Open the [Devices and Printers] window.
2. Left-click, one time, on the Microsoft XPS Document Writer or the Send To One Note devices.
3. Click Print Server Properties in the Menu Bar. (You will see "Add a device", "Add a printer", "See what's printing" and "Print server properties".)
4. Click on the [Drivers] tab.
5. Select the Canon drivers, then click [Remove].
6. Select "Remove Driver and Driver Package".
7. Click "OK". (You may receive a message stating that the Package could not be removed. This is fine. As long as the driver is deleted from the list, you can continue.)
Once the drivers are deleted, restart the computer. After the computer restarts, and leaving the USB cable disconnected, please follow the instructions below to install the drivers that you downloaded from the Canon USA website:
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder.
1. Please open your [Downloads] folder.
2. You will see two icons with the name: D1170_1150_1120_MFDrivers_W64_us_EN.exe . Double-click on the yellow folder icon with this name.
3. In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
4. The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete. Finally, scan a document by following the instructions below:
1. Verify that MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
2. The screen will show, "Scanning mode...".
3. On the computer, open the MF Toolbox and select [PDF].
4. Click the green [START] button on the [PDF] window. The machine will start processing the scan.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Maybe you are looking for
-
My Dell laptop (Operating on Windows XP) was hit with multiple viruses - I could not open Mozilla Firefox or any other applications for that matter. After much time and many attempts, I was finally able to install and run an AVG Scan and then an AVG
-
If I create a new Apple ID and rescue my old one will I still have all the credit I did on my previous Apple ID ?
-
Vacation Rule works for ALL but not for particular notification in Item typ
Hi, I have a situation where Vacation Rule is Ignored when choose the select option in notification page of vacation rule and notifications were being sent to Original Approver (who created the vacation Rule) instead of delegate. Vacation rule is wor
-
Is Airport Extreme a Worthwhile Upgrade Over 1st Generation Airport Express?
My two year old Airport Express still works fine. WIFI seems good. Wireless connection to Imac computer seems pretty fast. Is it worth getting the Airport Extreme? Will connection speeds increase or video streaming?
-
I have a HTML file containing an applet. i used java 1.4 version plugin & converter, it works fine if have 1.4 jre installed on my machine. If the client browser does not have java plug-in, how to automate the process of downloading and installing Ja