Windows 8.1 no internet

I am a complete computer novice so I have looked at a few posts on here but not entirely sure what to do! I updated to windows 8.1 and since then have been unable to connect to the internet. It has signal, and for other devices the internet is working but it has an exclamation mark and says it is limited! Under the network adapters in the device manager it has 2 descriptions. One is Broadcom 802.11n and the other is Qualcomm atheros ar8172/8176/8178? Any suggestions?

I was having the same issue, but I learn how to temporary fix it! 
1. Press the "start" key and the "x" key at the same time.
2. Click on "Device Manager".
3. Expand on "Network Adapters.
4. Right-click on the Internet connection device, and Click "Update Driver Software..."
5. Click "Browse my computer for software".
6. Click "Let me pick from a list...."
7. Click on either of the ones listed there and click "Next". It will update your network driver. Once it's done, check to see if it work. If it doesn't go back to the list and choose another option. 
This method has worked for me for the past few weeks. Every now and then I have to repeat these steps because the problem keeps on appear sometimes. I will eventually just do the recovery and downgrade back to Win 8. 
Hope this helps!
Note this also works for all other devices. I fixed my screen brightness adjustment like this. 

Similar Messages

  • Hi,I am unsure if I have a safari or modem problem. It only happens when I use my macbook pro, my HP windows is fine. Internet crashes on modem and then a message that safari is not connected. I don't know where to start sorry I am not technical at all.

    Hi there, my internet is crashing everytime I use my macbook pro/safari it happens roughly every 2 mins, it can happen on any website.
    I am not technical at all and I am at a total loss of where to start with this. I did a bit of research on the internet but no luck in finding any
    help.
    Basically I am not sure if it is a modem of safari problem. I have no problems when using my HP on without windows explorer on the internet.
    I am working wireless ADSL 2 - Bigpond - 2 Wire 2701 HGV-W and a macbook pro purchased around 5 months ago. Since the purchase date
    I have had problems with internet.
    Safari brings up a page you are not connected to the internet. I then look at the modem and DSL and internet lights are both flickering and or/off.
    They then re-set themselves. I then have to re-set preferences on safari and quit and restart.
    I have also tried using with cable into mac and modem and no difference.
    I can only figure that maybe Safari is not compatible with the modem? could this be the case?
    Thanks for reading and any assistance would be appreciated.
    Fi

    There's an Apple help page on the DNS problem - at http://support.apple.com/kb/TS3408
    The first thing to try is changing your DNS settings - and for that you need to open System Preferences, then the
    Network section.
    In Network - click  on Advanced - then the DNS tab
    under DNS servers - use the + button to enter two extra lines
    either these, from google dns
    8.8.8.8
    8.8.4.4
    or from OpenDNS
    208.67.222.222
    208.67.220.220
    then click OK & then 'Apply'
    You would need to do that seperately for the Cable (Ethernet) settings and Wireless (Airport)

  • For a LAN network in my office, all laptops are Windows based and the internet is through LAN and other computer get connected with adhoc without the router. My Apple computer nor my iPhone 5 get connected. How do I connect to this Internet?

    In the office, All my colleges use Windows laptops. The Internet connection is out of LAN wire installed in one of the computers. Others use Internet by creating adhoc connection. However none of the apple products are being able to connect to this connection.How can i connect my MacBook Pro or iPhone 5 to this Internet network?

    Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
    I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
    All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

  • Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

    Hi,
    The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
    IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
    Below is the details from IE11_main.log file
    00:00.000:
    ====================================================================
    00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
    00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
    00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
    00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
    00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
    00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
    00:00.016: INFO:    ...and 11.1.0.0...
    00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
    00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
    00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
    00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
    00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
    00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
    00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
    00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
    00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
    00:00.702: INFO:    Extracted Hyphenation dictionary for en to
    C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
    00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
    00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
    00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
    and extracted for use.
    00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
    SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
    00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
    00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
    00:02.870: INFO:    Windows 7 operating system detected.
    00:02.886: INFO:    Service pack major: 1
    00:02.886: INFO:    Service pack minor: 0
    00:02.886: INFO:    Service pack name:  Service Pack 1
    00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
    6.2.9200.16570 (True)
    00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
    6.2.9200.16492 >= 6.2.9200.16426 (True)
    00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
    6.1.7601.17727 (True)
    00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
    6.1.7601.18229 >= 6.1.7601.17617 (True)
    00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
    6.1.7601.17888 (True)
    00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
    00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
    6.1.7601.18010 (True)
    00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
    6.1.7601.18254 (True)
    00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
    6.1.7601.18247 (True)
    00:07.597: INFO:    Waiting for 0 prerequisite downloads.
    01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
    the downloaded package.
    01:37.423: INFO:    Waiting for 0 language pack downloads.
    01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
    01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
    01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
    neutral.Downloaded.cab
    01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
    /packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
    02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
    02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
    02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
    02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
    02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
    02:20.869: INFO:    Waiting for Active Setup to complete.
    02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
    02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
    02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
    02:32.756: INFO:    SQM Upload returned 403
    02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
    02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
    02:36.531: INFO:    Released Internet Explorer Installer Mutex
    Taweesak Archawamaitreekool

    DISM.log would make this clearer.  And using ProcMon I suspect would really make it snap out at you.   <eg>
    C.f. (credit for a recent discovery)
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9 
    Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
    Good luck
    Robert Aldwinckle
    Thank you very much.
    I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
    For DISM.Log, here are the details from the started time of the installtion process
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
    /quiet /norestart
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
    - CDISMManager::LoadImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
    - CDISMManager::CreateImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
    located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
    at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
    with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
    CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
    provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    Taweesak Archawamaitreekool

  • Accessing Home Hub 4 with windows 8.1 and Internet...

    Hello
    I can no longer access my home hub manager wirelessly running windows 8.1 and Internet Explorer 11 from my toshiba laptop by either typing in the IP address or by http://bthomehub.home/. I can still access it by either method from a laptop running windows XP. I have Infinity and Home Hub 4a. This problem has arose recently and I did upgrade from windows 8 last week so could this be the problem. Has anyone any suggestions?
    Regards
    Adrian
    Solved!
    Go to Solution.

    Seems to be a Network Adapter problem for most people, and usually updating the driver works.
    If you have just installed 8.1/8.1 pro, you will typically need to install your motherboard and other driver software. After you have done this, most people can access the internet, but have problems with the bt hub ip/url access link.
    To update the Network Adapter(s) use the following steps:
    1. search for Device Manager, and open it up
    2. Select/expand Network adapters, and the adapter(s) on your machine should show up.
    3. Right click on the adapter(s) that appear and select 'Update Driver Software'
    4. It should come up with 2 options - select 'Browse my computer for driver software'
    5. The next screen should come up with the default location for your machine, so just click the next button on the bottom right of this window.
    6. Your network adapter(s) will appear, and just select 'update driver software' and the latest version will be installed.
    7. That should fix most problems right away - if not, your machine (including hub and router) may need switched off and back on.
    I can't guarantee it will fix every problem, but the most common problem seems to be that the latest network adapter drivers needs a manual update after installing 8.1/8.1 pro, even after you install your motherboard / ethernet drivers.
    If you still experience problems accessing bt hub or internet, you can try this additional step:
    1. On your keyboard press Start + X keys (or microsoft logo key + X)
    2. This should open up system options dialogue box at the bottom left of your screen.
    3. Select Command Prompt (Admin) option.
    4. In command screen (old DOS screen) type the following: ipconfig /release (there is a space between config and /)
    5. This will release your ip address back into the network and cut your connection (don't worry)
    6. Whilst still in command screen, flush the dns cache - type: ipconfig /flushdns (space here again also)
    7. type exit to get out of command screen.
    8. Switch off your pc, and switch it off at the wall, also switch off router & bthub.
    9. Wait a few mins before flicking switches back on at the wall only - dont switch on pc yet - wait a min or so then switch on pc.
    10. You may need to run through the updating network adapter drivers again from the steps at the top - although this should not be needed.

  • Trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    HI Bill,
    Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
    Thanks
    Scott
    Here is the system req.
    Photoshop Elements 6.0
    Windows
    Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
    Microsoft Windows XP with Service Pack 2 or Windows Vista
    256 MB of RAM (512 MB recommended)
    1.5 GB of available hard-disk space
    Color monitor with 16-bit color video card
    1024 x 768 monitor resolution at 96 dpi or less
    Microsoft DirectX 9 compatible display driver
    CD-ROM drive
    Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
    Languages

  • Windows APP without real internet connection stops working in time

    Windows APP without real internet connection stops working in time
    Hello all,
    I am trying to get the following to work. We have an intranet page which users need to connect to, to operate some machines. This is done through an windows 8.1 Tablet with an assigned KIOSK mode app (Kios SP Browser).
    This works great as the assigned app is the only thing the user can run and we don't have to really harden the device. One drawback in using the assigned apps is that it needs to be an New App (as Microsoft call it)
    The app is installed on an reference machine which runs in workgroup mode (no domain connection is needed on the devices) and after the reference machine is installed it is imaged with the use of Acronis. After deployment the tablet has no connection to
    internet and the intranet page is wireless put available to the tablets. As a side note, the tablet operates with local accounts and the app is installed using an corporate hotmail account we created just for this purpose.
    I now deployed the image over 20 different tablet devices and this worked great until recently a few devices start to complain it needs to connect to the windows shop before the app can be started. As the devices don't have internet access this can't be
    done and the tablet is rendered useless for the user.
    How can i make the app available without internet connection ? and how can i be sure the app will continue to work over time without connection to the store ?

    Thanks for the reply.
    I can't unblock the internet connection as the wireless network doesn't have any internet connection what so ever. The main purpose is to be able to operate the machinery and nothing else, hence the kios app which is being used to show the intranet page
    which connects than to the devices.
    The problem is that after imaging the app works as expected but after a few days the app stops to work ...
    I found the following website over site loading an app without the needed appx files. It shows an way to capture the files during installation from the windows store.
    https://www.404techsupport.com/2014/06/installing-free-windows-8-modern-apps-without-the-windows-store/
    It is a bit strange to have it this difficult to install apps without the needed store and i think that Microsoft should make this easier. I hope this works better and after a few days i will give the feedback how this handles..
    If anyone knows of a better way .....

  • I cannot connect to my network. I have the Ipod 6 and my home computer is running on windows XP. My internet provider is Rogers. Any suggestions?

    How can I connect to my network? I received this as a gift and I cannot get it to connect. My home computer is running on Windows XP and my internet provider is Rogers. I have a network set up. Is therese something special that I need to do to ensure that this new device can communicate with the host computer?

    My router is 5 years old and I connected 5 iDevices with no issues. Your router may need a firmware update.
    But the easiest thing to try first is to reboot the router - unplug it for about 30 seconds and then plug it back in. Then restart your iPad. Restart the iPad by holding down on the sleep button until the red slider appears and slide to shut down. Hold the sleep button again until the Apple logo appears to start up.
    Some other thoughts .... Does your iPad recognize your WiFi network?  Go to Settings>WiFi>Your Network Name. Can you see it?

  • Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn)

    Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.

    Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
    If this is your "modem".......
    http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
    It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
    Does this device appear to be your "modem"?

  • How can I use my airport extreme to connect a windows machine to the internet? I don't have the software disks anymore...

    I no longer have any disks for my airport extreme (its pre-time capsule)... how can I connect my windows machine to it in order to get to the internet?

    You can directly download the AirPort Utility for Windows from Apple Support here.
    Once the AirPort Extreme is properly configured for Internet access you can connect your PC to the Extreme either by a wired or wireless connection.

  • Problem with Youtube on Windows 8.1 enterprise / Internet Explorer 11

    When the youtube videos finishes, the account logs off.
    I've tested on other video hostings, there is not any problem (vimeo.com, rutube.ru etc.)
    The problem seemson both, internet explorer desktop and app versions.
    Hardware: HP Laptop 2510p
    Software: Windows 8.1 Enterprise Clean Install.(The VGA driver is installed automatically by Windows.)
    Have anyone the same problem? Any suggestions?
    Thanks in advance!

    Hi, 
    It's not a bug, the cause of this issue is that  your current video card or video driver does not support GPU hardware acceleration well, and you may have to install the latest video driver supporting hardware acceleration.
    For detailed information about this setting, you can refer to this article: 
    How to enable or disable software rendering in Internet Explorer 9
    http://support.microsoft.com/kb/2528233
    Hope this would be clear enough to answer your Question.
    Kate Li
    TechNet Community Support

  • Windows Security Prompt in Internet Explorer 10 on Sharepoint Foundation 2013 site

    Hi,
    I have Sharepoint Foundation 2013 and when I access the site from Internet Explorer 10 I get prompted for windows security, after enter my domain credential I am able to log into the site.  When I access the site from Internet Explorer 9 I don't
    receive the windows security prompt.  Below you will find screenshot.  How can I prevent Internet Explorer 10 and later to not prompt for domain credential?
    Thanks

    Add *.domain.com to the Intranet Zone in IE.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Windows vista not recognizing internet on my mac

    I just recently installed boot camp and windows vista. Windows opens fine and seems everything is okay but it does not see my wifi (or any other network for that matter). I plugged in an Ethernet cable to my modem and it doesn't recognize that either. I have to update vista before it will let me run a program, but i cant update with no Internet connection.
    suggestions please.
    *the modem is on and works fine, when i go back to using mac the Internet works. I have a 2011 13 inch macbook pro. please give detailed help. I'm not to pc savy

    Same prob..my iphone doesn show up in my computer..autoplay also doesn starts..n it shows apple mobile in device manager..but does sync with itunes soo i cn backup stuff but cant transfer images from my iphone..plz help..thnx in advance

  • Boot Camp Windows 8.1 WiFi Internet Connectivity

    I have a MacBook Pro (Mid 2012) running Yosemite, and I have installed Windows 8.1 via Boot Camp.
    Most everything on my Windows OS works well, but I'm hitting an odd problem with the Internet connectivity. Sometimes, I can only get to certain sites in Internet Explorer, and NOT through Firefox or Chrome. And now, after initially installing a few days ago, I can no longer connect to the Internet via my Evernote, Dropbox, or Git apps.
    Has anyone else out there experienced something similar? It could be that this is just a Windows issue and I need to post a similar query elsewhere, but I thought I would start here. I don't see any errors anywhere in my Device Manager, and I even manually added Evernote to list of apps that is supposed to be able to access the Internet via a private connection, but still no joy.

    1. Your MBA does not support EFI/Free Space method.
    2. You need to ensure that your USB is a USB2 device.
    3. The MBR should be checked, because there are known cases where BCA fails to create the MBR.

  • Light Window not working in internet explorer

    For those of you familiar with lightwindow,
    This is one of the codes for a game on my site, when i use it
    for firefox it works great but when i try to use it with internet
    explorer i get Error: invalid argument
    TRY IT PLEASE I NEED HELP!
    html tester -
    http://jmarshall.com/easy/html/testbed.html
    <html>
    <head>
    <script type="text/javascript" src="
    http://www.cravedgames.com/box/javascript/prototype.js"></script>
    <script type="text/javascript" src="
    http://www.cravedgames.com/box/javascript/scriptaculous.js?load=effects"></script>
    <script type="text/javascript" src="
    http://www.cravedgames.com/box/javascript/lightwindow.js"></script>
    <link rel="stylesheet" href="
    http://www.cravedgames.com/box/css/lightwindow.css"
    type="text/css" media="screen" />
    </head>
    <body>
    <a href="
    http://www.dabontv.com/games/platformracing2.swf"
    class="lightwindow"
    params="lightwindow_width=550,lightwindow_height=411"
    title="Platform Racing 2"><img src="
    http://www.cravedgames.com/images/platformracing2.jpg"
    width="111" height="111" border="0" alt=""></a>
    </body>
    </html>

    and attempted to open with IE
    If it will open with Safari or Firefox for Windows, then the problem likely rests with IE.

  • Using Bootcamp Windows 7, my wireless internet stays connected most of the time, but occasionally says "no internet access", then reconnects after a period of time. How can I keep a stable connection?

    I'm running Windows 7 Ultimate on Bootcamp. I've installed all Windows software, with all the drivers, and my wireless internet works fine. But, every once in awhile, it will say, "no internet access", and I'm unable to do anything until it restores. Like I've said, all the drivers have been installed, and they're both copied onto my desktop, and on a flash drive.
    I need to keep a stable connection, because I only use my Windows partition for gaming, and when I get disconnected from the internet, I get booted from the game. Any advice?

    what version of bootcamp you use to install all of the driver ?? is it the problem was from the beginning you installed windows or just now ?? or maybe you can try usb wifi to test the windows is not the problem..

Maybe you are looking for

  • Report for gl accounts with reference to purchase order

    hi experts Is there any report which can give the gl accounts with reference to purchase order thnx

  • How to display an ouput in d specific format?

    hi frnds.. i wud lik to display d output(may it be a name or a number) in d following format.. O R A C L E how do i write a query to display d output in dis format??

  • Transformation activation problem

    Hello All, after saving a transformation it results a failure of the system. No errors are displayed but something goes wrong: after saving the transformation, it looks like it is saved successfully (as I can read on the left bottom) while simultaneo

  • Installing SP3 on MSSQL SERVER 2008 with Replication

    Hi there How would one go about installing SP3 on SQL 2008 with replication? Would i need to turn off replication to avoid schema changes taking place across the line? Our servers are across the country and wouldn't want all that data to replicate ov

  • CS5.5 keeps crashing constantly (Shadowplay issue?)

    Ever since a week ago or so my CS 5.5 2 keeps crashing almost every time i try to preview a video in Premiere Pro. My system is: I7 3930k, 780ti, 16 GB RAM, Windows 7 64bit. I've used shadowplay to record the videos that keep crashing the program. Sh