Windows 8.1 not able to load properly

hello sir/madam ,
I am pankaj kumar , I am facing a problem with my laptop(HP Pavilion g6) .I am upgrading my windows 7 to 8.1 enterprise that I have downloaded from my MSDN Account . I was using it before 4 month without any problem but aprox. 10 days back my laptop was
faced some virus attack so I formatted my system now I am updating my windows(activated ) by using windows update it install a switchable graphics AMD Radeon HD 7400M with Intel(R) HD Graphics 3000 along with some other update and I am trying to Enable NetFx3
OS feature that is not available in windows using windows media(DVD) . after every thing done when I restart my laptop it is not able to restart , I can't able to find by which it if affecting , from 10 days I am getting same problem after booting
process done it shows only blank screen nothing is visible one that without any error massage and my CPU is working fine on that so I need to shutdown my laptop by using power button and after 2-3 times it gives advance repairing option through
which I can restore my computer to previous date or refresh my system by inserting my OS DVD but it remove everything I install on the way and reset my system to fresh install position and then working fine but when I try to install everything and
enable the OS features and update, it will again face the same problem .from when I have formatted my system apx. 10 days back I am getting this everyday . So please I need immediate help please .I can't able to find by which I am getting this
problem .
thanks!
pankaj kumar (MSP).

Hi,
Have you tried any method to resolve this problem? According to your description, I doubt this is Graohic driver problem. Please check Event Viewer if it identify this problem.
In addition, please try to uninstall Graphic driver, just let system install its build in compatibility Graphic driver for test.
Roger Lu
TechNet Community Support

Similar Messages

Hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc

hi i am not able to load any google sites ie gmail,orkut,youtube(login),,etc
when i tryied to open sites like www.gmail.com i got error msg as:
The connection was interrupted
The connection to www.google.com was interrupted while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
i am currently using firefox 3.6.10 so what to do to fix this pblm?

Make sure that your security software (firewall) isn't blocking or interrupting that connection.
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

I bought iphone 4 in US and i and other person not able to listen properly because on the time of conversation voice cracking and difficult to understand each others.so i would like to request you that please solve the above problem.i love my iphone.

Sir,
I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
waiting for your earliest reply.
thanks
Rajeev Gupta

Hello sir
As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
I will be thankful to you
Rajeev Gupta

PLEASE HELP:not able to load a simple servlet

Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully run jsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS and then
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet but when
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

Nice to hear it works!
However, one mistake you have in the configuration you provided:
You put D:\weblogic\BDL\servletclasses in both CLASSPATH and
weblogic.class.path, remove it from CLASSPATH.
Cheers - Wei
Sravan Thella <[email protected]> wrote in message
news:[email protected]...
Hi Michael and Wei,
Thank you very much for the response.
My servlet details:
Name - HelloWorld2.class
package - examples.servlets
Location - d:\weblogic\BDL\servletclasses ---- here BDL is my new folder
where I want to keep my servlets
My CLASSPATH(environment) settings:
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
my weblogic classpath settings(set it thru wlconfig)
D:\weblogic\BDL\servletclasses;d:\weblogic\classes\boot;d:\weblogic\eval\clo
>
udscape\lib\cloudscape.jar;d:\weblogic\lib\poolorb.jar;D:\java\jre\lib\rt.ja
r;
My weblogic.policy:
grant codeBase "file:d:/weblogic/-" {
permission java.io.FilePermission "d:${/}weblogic${/}-",
"read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
grant codeBase "file:d:/weblogic/BDL/servletclasses/-" {
permission java.io.FilePermission
"d:${/}weblogic${/}BDL{/}servletclasses{/}-", "read,write,delete,execute";
permission java.net.SocketPermission "localhost:1-9000",
"connect,accept,listen,resolve";
permission java.awt.AWTPermission "accessClipboard";
permission java.awt.AWTPermission "accessEventQueue";
permission java.awt.AWTPermission "showWindowWithoutWarningBanner";
permission java.io.SerializablePermission"enableSubclassImplementation";
permission java.io.SerializablePermission "enableSubstitution";
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "accessDeclaredMembers.*";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "createSecurityManager";
permission java.lang.RuntimePermission "defineClassInPackage.*";
permission java.lang.RuntimePermission "exitVM";
permission java.lang.RuntimePermission "getClassLoader";
permission java.lang.RuntimePermission "createClassLoader";
permission java.lang.RuntimePermission "getProtectionDomain";
permission java.lang.RuntimePermission "loadLibrary.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.lang.RuntimePermission "readFileDescriptor";
permission java.lang.RuntimePermission "setContextClassLoader";
permission java.lang.RuntimePermission "setFactory";
permission java.lang.RuntimePermission "setIO";
permission java.lang.RuntimePermission "setProtectionDomain";
permission java.lang.RuntimePermission "setSecurityManager";
permission java.lang.RuntimePermission "writeFileDescriptor";
permission java.lang.reflect.ReflectPermission "suppressAccessChecks";
permission java.net.NetPermission "requestPasswordAuthentication";
permission java.net.NetPermission "setDefaultAuthenticator";
permission java.security.SecurityPermission "getPolicy";
permission java.security.SecurityPermission "setPolicy";
permission java.util.PropertyPermission "*", "read,write";
I dont know what is wrong here. In the weblogic.policy file,I tried
differrent combinations but it never worked.
I find weblogic documentation for troubleshooting to be pathetic.Notuseful
at all.Documentation looks
good to read ;not for practical purposes.I'm not sure whether others have
similar opinion.
I'm stuck at this thing for the past few days,I still have lot of work todo
to purusue our management team to buy weblogic
but I'm still stuck at this thing.
Thank you very much for your time.
Thanks,
Sravan
"Sravan Thella" <[email protected]> wrote in message
news:[email protected]...
Hi,
I'm new to weblogic server.I'm trying to setup weblogic 510.Everything
was
going fine until I got stuck to this small thing.I'm not able to load a
simple servlet!.
I would appreciate any pointers regarding this.Please Help me!!!
Here is what I tried:
I have installed weblogic510 plug-in for IIS.I could successfully runjsp
files.However I am not able to load simple servlets;It gave an exception
"java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/FileSource from class
weblogic/servlet/internal/WarClassFinder"
Details of my configuration:
WebServer - IIS 4.0
IIS port=80
Weblogic port=7001
I had set it in such a way that all the requests first go to IIS andthen
IIS redirects them to Weblogic.I've followed the steps according to the
document "Installing the Weblogic ISAPI Plug-in".
I've registered the servlet in weblogic.properties as following:
weblogic.httpd.register.hello=examples.servlets.HelloWorld2
I tested the servlet by URL http://localhost:7001/hello
Following is the eact text for the exception I got in the WeblogicServer
window:
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Error loading
servlet:
examples.servlets.HelloWorld2
java.lang.IllegalAccessError: try to access class
weblogic/utils/classloaders/Fi
leSource from class weblogic/servlet/internal/WarClassFinder
at
weblogic.servlet.internal.WarClassFinder.getSource(WarClassFinder.jav
a, Compiled Code)
at
weblogic.servlet.internal.WarClassFinder.getClassSource(WarClassFinde
r.java:110)
at
weblogic.utils.classloaders.GenericClassLoader.findLocalClass(Generic
ClassLoader.java:381)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Slave.
loadClass(RecursiveReloadOnModifyClassLoader.java:234)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.findLo
calClass(RecursiveReloadOnModifyClassLoader.java:109)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:291)
at
weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
java:164)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:99)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,Compiled
Code)
Mon Jul 24 12:13:13 PDT 2000:<E> <ServletContext-General> Servlet failed
with Ex
ception
I dont think there were any problems in the classpath or
servletpath;Basically WeblogicServer was able to locate the servlet butwhen
it tried to load the servlet it gave this exception.
I would appreciate any ideas/suggestions.
Thanks,
Sravan

Re: Dynadock not able to configure properly external monitor

Dear Sir/Madam,
I found a problem with my Dynadock (PA3541EY1PRP) in terms that it is not able to configure properly the monitor (LG Flatron E2250V-PN).
I would make clear that my PC is working under win 7 64bit.
Thanks oodles for your support.
Regards
MAx

ok,
when I connect VGA cable to the dynadock, external monitor apperas to be in low resolution.
Checking in the "screen resolution", windows shows "no monitor" (can I attach a file to show the screenshot?) and the maximum resolution is set at 1440X900. Therefore, I am forced to connect directly the external monitor to the pc. In this case the monitor is properly recognized as "VGA monitor" and the resolution appears to be rightly set at 1920X1080.
thanks

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device

Not able to load master data

HI Friends,
I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
The SRM is refreshed every quater so we need to re load the data from that system.
Can you please suggest how to go about as it is very urgent ,
I have checked that the connection is working fine but there is one short dump that is coming
this is information that st22 is provding
The termination occurred in the ABAP program "SAPLRSS1 " in
"RSM1_CHECK_FOR_DELTAUPD".
The main program was "RSPROCESS ".
The termination occurred in line 1361 of the source code of the (Include)
program "LRSS1F11 "
of the source code of program "LRSS1F11 " (when calling the editor 13610).
The program "SAPLRSS1 " was started as a background job.
Thanks
Raju

Hi Raju,
Very strange to see your dump mesg when you are doing full load.
Are you sure this dump is realted to your load.
Check if your transfer structure is active or try doing following steps:
1. Kill all the jobs runing in BW system.
2. Delete all the data in all the realted data targets and infoobjects.
3. Then try uploading data one by one.
Ans why dont your try uploading data first only to PSA.
Regards,
Rohini

My ipod is not able to load my contacts when i select it

my ipod is not able to load my contacts when i select it. Can u help me please??

From which computer app (name and version) are you trying to load (really sync) the contacts?
What computer OS and version are you using?
What iOS version?

Iphoto is not able to load my pictures

Hello I have a problem while running iphoto. The program is not able to load my pictures it gets stock searching for pictures and does not displays a single image, none of the commands respond
Can you give an advice.
How can I reinstall this program.
as you can see I'm not an apple expert yet.
ilamp Mac OS X (10.3.9)

Oh dear!
Well I would start by deleting iPhoto and it's files. Do not touch the iPhoto Library folder found in the Pictures folder.
To reinstall iPhoto...
Navigate to /Applications and drag iPhoto to the trash
Navigate to /Library/Receipts and drag all iPhoto receipts to the trash
Navigate to ~/Library/Preferences and drag com.apple.iPhoto.plist to the trash.
Look at this link and see what info pertains to you to reinstall iPhoto from your computer discs.
How to restore your Apple software
Mac OS X 10.4: Restoring applications from a Mac OS X 10.2 Software Restore disc
Look all the way down the page for a downloadable version of Software restore to use in Tiger that works with your OS 10.2 computer specific software.
Install iPhoto.
Run Software Update and update iPhoto.
Hopefull you will be able to open your iPhoto Library.
Lori

Camera Raw not able to load lense correction profiles

Hi there,
like the topic says.. I am not able to load lense correction profiles and get always the error message. I have the newest version (Creative Cloud Member) of Photoshop CC 2014 15.2.2 and my Mac OSX is up to date. With older versions (when I start from a backup it is working fine!? So what can I do?! I dont want to run PS from my backup folder.. it hast to work with the actual release as well. I did not change anything.. already tried with uninstalling and reinstalling PS. But it didn´t solve the problem.

Possibly a reset to both Bridge and Camera Raw is in order. First, close Bridge. Now hold Cmd+Opt+Shift as you restart it. A box will appear; Place a check mark on all three options and hit "ok." Now, again, Cmd+Opt+Shift as you "open in Camera Raw."
See is this helps.
Benjamin

Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

I have a sony handy cam dcr-sr85 that is not able to load to iMovie

I have a sony handy cam dcr-sr85 that is not able to load to iMovie .Does anyone have any ideas .I think maybe I need to download a driver but I'm not sure . A free one would be nice. Thanks Steve

Is it listed here as supported?
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US
Are you connecting by firewire?

Too basic to be believed: 1 Windows XP desktop not able to connect to 10g

I have one Windows XP computer (out of MANY in office) that I cannot create a working ODBC DSN for a 10g database on a linux server in our network. I have tried the 10.2.0.1 instant client, the administrator client, and the 11.0.1.7 instant client. In every case, when trying the "test connection" when adding the DSN I fail on the ORA-12541: TNS: no listener. I know the listener is on since I connect to it from about a dozen other computers.
I have confirmed the OCI is installed, the ODBC driver on which I base the DSN is (now) the Oracle 11g Client. There is a tnsnames.ora file in the ORA_HOME/network/admin/ folder. The tnsnames file is the same as on a computer that can connect.
This is SO odd. I cannot figure out where to look next.......

MNTNAWOLF wrote:
To WyreNut,
Thank you for your information on loading software for my Palm Desktop 4.2.1 to my PC using Windows XP. I was able to get it loaded but I am not able to create an address book to work with our names data base. I can get Contacts but that is it. I read the manual you had sent the link to as well, but it did not give me the information I needed. I did print up instructions from our Mac but what I downloaded is not the same. If you have any other suggestions I would love to hear them.
Thank you,
Are you using a Palm device, or just the software?
If using the device, when you do a Hotsync to the PC, all data should transfer to Palm Desktop.
"Contacts" is the newer name for the "Address Book", so I'm not quite sure what you mean by not being able to create one...?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

MDM Not Able To Load Linux Kernel Images Larger Than 32MB?

Hi All,
I've been building linux initramfs images for use with a Kintex7 (KC705) running a MicroBlaze processor and have been running into an issue with loading the images using the MicroBlaze Debug Module. It seems the system won’t boot if the image is larger than 32 MB. Unfortunately, my use case requires all application code to be contained in the kernel image and I won't have local non-volatile to boot from.
Some key factors:
Petalinux 2014.4
FPGA image built using Vivado 2014.4 on Windows 7
1GB RAM on KC705
Loading images using TCL script on XMD on Windows 7
As an example, I built an image that would fit within the 32 byte "limit" and booted it with no issues:
Image Type: MicroBlaze Linux Kernel Image (uncompressed)
Data Size: 31035828 Bytes = 30308.43 kB = 29.60 MB
MicroBlaze Processor Configuration :
Version............................9.4
Optimization.......................Performance
Interconnect.......................AXI-LE
MMU Type...........................Full_MMU
No of PC Breakpoints...............1
No of Read Addr/Data Watchpoints...0
No of Write Addr/Data Watchpoints..0
Instruction Cache Support..........on
Instruction Cache Base Address.....0x80000000
Instruction Cache High Address.....0xbfffffff
Data Cache Support.................on
Data Cache Base Address............0x80000000
Data Cache High Address............0xbfffffff
Exceptions Support................on
FPU Support.......................off
Hard Divider Support...............on
Hard Multiplier Support............on - (Mul64)
Barrel Shifter Support.............on
MSR clr/set Instruction Support....on
Compare Instruction Support........on
PVR Supported......................on
PVR Configuration Type.............Full
Data Cache Write-back Support......off
Fault Tolerance Support............off
Stack Protection Support...........off
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234
System Reset .... DONE
Downloading Program -- simpleImage.mb
section, .text: 0x80000000-0x802a2b27
section, .init.text: 0x80359000-0x803727a3
section, .init.ivt: 0x803749c0-0x803749e7
section, .note.gnu.build-id: 0x00000000-0x00000023
section, __fdt_blob: 0x802a2b28-0x802aab27
section, .rodata&colon; 0x802ab000-0x8032085f
section, __ksymtab: 0x80320860-0x803254f7
section, __ksymtab_gpl: 0x803254f8-0x80327f17
section, __ksymtab_strings: 0x80327f18-0x803380f6
section, __param: 0x803380f8-0x80338417
section, __modver: 0x80338418-0x80338fff
section, __ex_table: 0x80339000-0x8033a59f
section, .sdata2: 0x8033a5a0-0x8033afff
section, .data&colon; 0x8033b000-0x8035809f
section, .init.data&colon; 0x803727a4-0x803749bf
section, .init.setup: 0x803749e8-0x80374cdb
section, .initcall.init: 0x80374cdc-0x80374fa3
section, .con_initcall.init: 0x80374fa4-0x80374fab
section, .init.ramfs: 0x80374fac-0x81d991b3
section, .bss: 0x81d9a000-0x81dabb7b
Then, I added a 10MB random file (created using dd from /dev/urandom) to the same rootfs and tried booting again unsuccessfully:
Image Type: MicroBlaze Linux Kernel Image (uncompressed)
Data Size: 41521588 Bytes = 40548.43 kB = 39.60 MB
MicroBlaze Processor Configuration :
Version............................9.4
Optimization.......................Performance
Interconnect.......................AXI-LE
MMU Type...........................Full_MMU
No of PC Breakpoints...............1
No of Read Addr/Data Watchpoints...0
No of Write Addr/Data Watchpoints..0
Instruction Cache Support..........on
Instruction Cache Base Address.....0x80000000
Instruction Cache High Address.....0xbfffffff
Data Cache Support.................on
Data Cache Base Address............0x80000000
Data Cache High Address............0xbfffffff
Exceptions Support................on
FPU Support.......................off
Hard Divider Support...............on
Hard Multiplier Support............on - (Mul64)
Barrel Shifter Support.............on
MSR clr/set Instruction Support....on
Compare Instruction Support........on
PVR Supported......................on
PVR Configuration Type.............Full
Data Cache Write-back Support......off
Fault Tolerance Support............off
Stack Protection Support...........off
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234
System Reset .... DONE
Downloading Program -- simpleImage.mb
section, .text: 0x80000000-0x802a2b27
section, .init.text: 0x80359000-0x803727a3
section, .init.ivt: 0x803749c0-0x803749e7
section, .note.gnu.build-id: 0x00000000-0x00000023
section, __fdt_blob: 0x802a2b28-0x802aab27
section, .rodata&colon; 0x802ab000-0x8032085f
section, __ksymtab: 0x80320860-0x803254f7
section, __ksymtab_gpl: 0x803254f8-0x80327f17
section, __ksymtab_strings: 0x80327f18-0x803380f6
section, __param: 0x803380f8-0x80338417
section, __modver: 0x80338418-0x80338fff
section, __ex_table: 0x80339000-0x8033a59f
section, .sdata2: 0x8033a5a0-0x8033afff
section, .data&colon; 0x8033b000-0x8035809f
section, .init.data&colon; 0x803727a4-0x803749bf
section, .init.setup: 0x803749e8-0x80374cdb
section, .initcall.init: 0x80374cdc-0x80374fa3
section, .con_initcall.init: 0x80374fa4-0x80374fab
section, .init.ramfs: 0x80374fac-0x827991b3
section, .bss: 0x8279a000-0x827abb7b
I've also tried the same test with a plain Petalinux image and none of my application code or other customizations to rule out a configuration issue. Additionally, I've tried updating Vivado to 2015.2 and rebuilding the FPGA image, also with no success.
FYI, here is the TCL script used to load the images:
fpga -f system_top.bit
connect mb mdm
after 2000
dow simpleImage.mb
con
disconnect 0
I've done a bunch of research on initramfs and haven't seen anything that points to a size limit (except as it relates to RAM size). Anyone have an idea what's going on?
Thanks!
-Nick

Some additional information:
When the system fails to boot, there is no error message displayed either on the XMD window or the linux console output. The console remains blank.
I have been able to add random files to the ramdisk that do not push the size over the 32MB boundary and the system successfully boots.

Not all websites load properly

There are some sites, like bitly.com that won't load properly in Safari, Chrome, nor Firefox. I'm not able to hover over my account to sign-out, as well as not able to paste links to get them to shorten it. The site loads fine on my iPhone and iPad, but not on my Macbook Pro.
Other sites like Mashable, I'm not able to view any of the galleries. It's getting frustrating.
I've tried logging in as a guest, still the same issue. I even tried disabling ALL the plugins that are on the mac, still, same issue. I cannot figure out what it is that could be causing this problem!
Thanks for your help!

Try another DNS servers. Try either OPENDNS (see their instructional video) or Google's Public DNS and replace your ISP DNS. Do the change in your router for all your computers.

Windows 8.1 not able to load properly

Similar Messages

Maybe you are looking for