Windows 8.1 not connecting to DirectAccess after coming out of hibernation

Have a strange issue with Windows 8.1 and DirectAccess on Server 2012. Initially after performing a clean install of Windows 8.1 my directaccess connection was working fine, even after coming out of hibernation, it would reconnect to directaccess with no
issues. Yesterday after applying Windows updates and rebooting my Windows 8.1 would connect to DirectAccess fine. If I hibernate and come out of hibernation my DirectAccess status is stuck on Connecting and only connects if I reboot.
I performed a system restore as of last week and my DirectAccess connection is back to working as expected. So it seems a particular windows update is causing this issue. Anyone knows which one in particular?

Hi There - nothing specific that i know of but have all the Hotfixes been applied to both server and 8.1 clients (which may fix the issue)
http://support.microsoft.com/kb/2883952/en-us
John Davies

Similar Messages

W520 running Windows 8.1 not connecting to internet after sleep

Hey everybody, really need the help!
I have a w520 that suddenly stopped connecting to the internet after waking up from sleep. I will connect to the network and show others but the connection to the Internet times out. Once I restart I can access the Internet but as soon as it goes to sleep the problem happens again. I have tried on many different networks and at the beginning of the week this was not an issue.
Things I have tried:
different browser
different networks
reinstalling the drivers for the card
What else could be causing this sudden issue?

Welcome FIMuPhi198
1. Go to Start > System Update > Install all critical and recommended updates.
2. Download and install the newer version of Wi-Fi driver from Intel.
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

Lenovo T-400 series thinkpad. Mouse on the laptop does not respond after coming out of hibernation.

I have just received the new T-400 series Laptop. In few days I have observed twice that when the laptop comes out of hibernation the mouse stops responding. On both occasions I was forced to restart it.
Has anyone else experienced the same and most importantly can anyone let me know how to fix it?
Thanks

why did you mark this as an answer? you didn't provide any solution to this. the link you posted clearly states that the keyboard is compatible here:
http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/32427/session/L2F2LzEvdGltZS8xMzU1MjY2Nzk0L3NpZC82VXlYWHZkbA%3D%3D
futhermore logitech themselves state the following:
NOTE: Logitech mice and keyboards are Human Interface Devices (HID). HID drivers are native to modern Windows operating systems, enabling basic functionality without the need for other software. To use enhanced features,
such as programming keys and buttons, additional software may be required. See the product's Support page > Downloads tab for software availability.
the keyboard should work regardless of any additional drivers from logitech. that being said, i have installed all the latest drivers and the keyboard is still unresponsive when it comes back from standby. this is obviously some sort of an OS
problem.

Cannot Connect to AE After Coming out of Sleep Mode

This happens on both my iMac and Powerbook. I don't normally use wireless on the iMac but I discovered that both computers are having the same issue when troubleshooting. When coming out of Sleep mode, the Airport device cannot connect to the Airport Express. The only thing that can consistently connect is my Blackberry.
I know it's not a reception problem as when I am able to connect, the signal is strong and speeds are very good.
Some things I have tried to fix the problem have worked but not consistently as the problem keeps happening:
-Turn Airport off and back on (On the computer)
-Unplug and plug back in the AE
-Turn off MAC Address Filtering
-Factory reset the Airport Express
-Select the Join Other Network option and re-enter my wpa2 credentials
-Uncheck Closed Network option
What could be the problem? I'm really thinking there is a software bug somewhere. I have also noticed if I make any changes in the Airport Utility the AE never recovers as it stays a solid amber. I have to power cycle the device.
It's using software version 6.3 and all my OS X updates are the latest. This is very frustrating. Any help appreciated.

I have tried both remedies mentioned above. I double-checked and my network is listed in the wireless advanced settings. It's the only network in my list. Airport is at the top in my Network Preferences as well.
I was hoping the update to 10.5.8 would help but the problem keeps occurring. One thing I have tried is leaving the "Closed Network Option" unchecked for my AE. Now, I am discovering when exiting sleep mode, I see my network but when it tries to connect, I receive the error "Connection Timeout". This happens on both computers.
The only thing that works the most consistently is unplugging the AE and plugging back in. Once I'm connected, it works great.
I tried using iStumbler to see if there were any other networks using the same channel but that looks okay.
I guess I can try using a different security setting other than WPA2, but then that is not really a solution. I'm about ready to just try some other newer wireless solution. It used to work flawlessly. I think until 10.5.4, I had no issues.

HP 8500A Plus does not reconnect to computer after coming out of sleep mode for scanning.

I have my HP 8500A Plus connected via network to my iMac running 10.6.7. Once I "wake up" the printer from sleep mode it does not show connected to the computer for scanning purposes. It has no problems printing after "waking up", just can't scan from the printer menu. Suggestions?
Thanks

Hello dtw9872,
Kindly install Windows 7 service pack 1 and then check.
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5842
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP 2010i monitor- Flickering after coming out of hibernation

When I turn the monitor on, or wake the monitor back up after it has gone to sleep, the screen flickers for a minute or so, gradually lessens, then stops flickering. It appears to be the backlight leds flickering around the perimeter of the screen (my guess). It is connected by DVI cable to my tower, the connection seems fine. Monitor is about 3 years old and is out of warranty. Is this something that can be fixed (worth repairing?), or is it just dying a slow death and I need to shop for a new one?

Hello @tgantt,
I understand that you get flickering after waking from sleep mode on your computer. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Replace the cable connecting the monitor to your computer
If the above steps did not resolve your issue you can try installing the HP 2010i 20-inch Diagonal LCD Monitor Drivers on your computer. If the issue still persists I recommend that you download and install the latest graphic drivers for your computer.
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My iPod will not connect to itunes after windows 8.1 download

My iPOD will not connect to itunes after windows 8.1 download
I already uninstall itunes and made sure there were no file left before I installed again (it didn't appear to be any files left but music I had on it before was still there when I reinstall it)
My ipod does work on my old computer and it was working on windows 8 before I update to 8.1
I don't want to installed again because I just did that and didn't work!
I want to use my iPod on this computer and system. Can this be fix?

Hey TheBurntApple,
Thanks for the question. I understand that you are experiencing issues with your iPhone connecting to iTunes for Windows. While you may have already attempted most of the steps in this article, I wished to provide it to you just in case something was omitted.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?

Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.

Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too.

Ipad2 could not connect to itunes after i restore

ipad2 could not connect to itunes after i restore(newest iO7)

Help in here.
iOS: Device not recognized in iTunes for Windows
Or in here.
iOS: Device not recognized in iTunes for OS X - Apple Support
Mac OS X v10.6: iOS device not recognized in iTunes after ...

Windows 8 can not connect RemoteApp on W2K12 RDS, but Windows 7 can connect. Why?

Hi!
Windows 8 can not connect RemoteApp (W2K12 RDS), but Windows 7 can connect. Why?
External and internal DNS name is different, the public Cert is mapped to RD Web Access and a RD GateWay Role.
The internal cert (issued by enterprise ca) is mapped to RD Connection Broker roles (SSO and Publishing).
These certifications also be installed on client computers (Personal and Trusted Root Certification Authorities).
The internal CA revocation list is publicated to a website and this web site is accessible from internet. Ports (3389,3391,443) forwarded to RDS server.
On windows 7 everything works fine, but Windows 8 can not connect to Remote Apps. Windows 8 can connect to RDS server via Remote Desktop Connection.
The error:
Thank you for your answers.

Check this thread ->
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c0d7c4a-e422-4a6c-99eb-66df26a1ffc6/rdp8-your-computer-cant-connect-to-the-remote-computer-because-an-error-occurred?forum=winserverTS
and this
http://support.microsoft.com/kb/2903333
HTH,
JB

How do I activate acrobat 8 and adobe software on windows XP while not connected to internet? [was: Windows XP.]

Please help me.
How do I activate acrobat 8 and adobe software on windows XP? While windows XP can not connect to internet.

Hi Tom,
We would like to inform you that Acrobat 8 is now end of life, we have limited recourses for it.
Kindly check the System requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC
Please check the following links if any of them works for you.
Acrobat 8 activation problem
Adobe - Adobe software activation: Phone activation
Offline Activation
Thanks,
Atul Saini

Why may i not connect wifi mode after atualization? Only 3G is functioning!

Why may i not connect wifi mode after atualization? Only 3G is available.

Why may i not connect wifi mode after atualization? Only 3G is available.

No USB Functionality After Coming Out of Standby Mode - Windows XP SP2

I currently use my MacBook with Boot Camp to run Windows XP SP2 (as the default boot OS). I have enabled standby so that I can save battery power. However, whenever I come out of standby, it seems as if the USB ports no longer work. Sometimes I'll have a USB mouse plugged in and it will no longer work after coming out of standby (in the past, it would take like 10 minutes to work, but now it seems to not work at all). I have tried unplugging it and plugging it into a different USB port with no success. I have even tried another USB device (a digital photo frame product) and it doesn't detect either (although it seems to provide power via the USB port because the digital photo frame shows the "connecting..." screen). Any help regarding this is greatly appreciated, since its so frustrating to have to reboot to gain access to my USB ports. Thanks!

Same with BootCamp v2.1 and in XP SP3. More Apple software bugs it seems (seem to be rampant across all their gadgets - e.g. iPod Touch 2G v2.1.1 WiFi WPA/WPA2 failures, etc.).
Frustrated, thinking about third party Bluetooth keyboard mouse (e.g. Logitech DiNovo Edge works great on my Mac mini with it's own mini USB bluetooth receiver, just tap a key to resume from standby like you're supposed to be able to!) -- or a traditional Logitech wireless.
MIS (kscorp)

Windows 7 Sleep issues--freezes after coming out of sleep

Running Windows 7 rig with MSI MS-7511 Mobo. Back in October, I purchased a refurb Microsoft Wireless 6000 keyboard and installed it. I THINK this is what started my problems. Since then, computer will go into sleep mode as usual, but at some point after coming out of sleep (maybe a few seconds, maybe an hour) it will totally freeze. The only way to get the system back up is to unplug it and re-start.
I have since uninstalled the keyboard, and tried to restore, but still having the problem. Pretty sure it's a USB problem, but I have tried re-installing drivers (mcp732) and even the MB BIOS. If I run the system without my wireless mouse and with no USB devices, it works fine. I have also tried switching USB devices to different ports, to no avail.
It's not just the mouse that causes the issues, it seems to be any connected USB device.
Also--and I think this is weird-I installed a PCI USB card in one of the slots and transferred my mouse to that and the same thing still happens. Wouldn't that be a totally different set of drivers than the ones that drive the main MB USB devices?
Don't know what to try next . . . want to avoid having to do a Windows re-install if possible.
Below are the errors I get when I run powercfg -ENERGY.
Any ideas? Would like to avoid giving away another two days of my life re-installing my software.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Root Hub
Host Controller ID   PCI\VEN_10DE&DEV_077E
Host Controller Location   PCI bus 0, device 4, function 1
Device ID   USB\VID_10DE&PID_077E
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Root Hub
Host Controller ID   PCI\VEN_10DE&DEV_077B
Host Controller Location   PCI bus 0, device 2, function 0
Device ID   USB\VID_10DE&PID_077B
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   Microsoft Hardware USB Wireless Mouse
Host Controller ID   PCI\VEN_10DE&DEV_077B
Host Controller Location   PCI bus 0, device 2, function 0
Device ID   USB\VID_045E&PID_00E1
Port Path   5
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name   USB Mass Storage Device
Host Controller ID   PCI\VEN_10DE&DEV_077E
Host Controller Location   PCI bus 0, device 4, function 1
Device ID   USB\VID_0781&PID_5406
Port Path   3

Quote from: itsallpoo on 04-March-11, 07:46:27
I don't think I've had a setup yet where sleepmode wasn't causing issues, I shut it off.
Sleep has only become an issue with Windows 7, where MS got so aggressive about it, and caused so many problems for so many people, that many have done as you and turned it off! Shame on you Microsoft! Instead of saving energy your customers are leaving their PCs on!
I suspect the OP's problem is with (of all things) the MS wireless mouse/kb driver(s). At first my setup wouldn't work at all, then I dl'ed the newest Intellimouse drivers/software and it worked "better", but I have never been able to get Sleep to work reliably. I finally found that Hibernate works reliably, so that is all I do now. When the PC is done working, it saves to HDD and shuts off. Resuming from this state takes longer than resuming from Sleep, but at least it Works Every Time.

Windows 8.1 not connecting to DirectAccess after coming out of hibernation

Similar Messages

Maybe you are looking for