Windows 8.1 Not Responding

When File/Add Folder or File iTunes opens Explorer Wndow and freezes. This happened after updating from Windows 8 to Windows 8.1.

Similar Messages

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy.

I booted up this morning to find my voice over feature active. A black bar was at the lower left corner of my screen. When I began to click on the users in my login window it would not respond. All that I saw was the black bar saying authentication busy. I was not able to restart, I was not able to switch users, I was not able to shut down. I decided to manually shut down my Mac. when it booted back up I was looking at the disk utility screen. When I clicked on repair or race it indicated that my hard drive had already been arranged. I was looking at completely formatted drive and I was having to either restore from Time Machine or reinstall lion. I had a back up but why did this happen?

A possible workaround could be to have the horizontal scroll bar visible all the time.
<pre><nowiki>body { overflow-x: scroll !important; }</nowiki></pre>
* Stylish: https://addons.mozilla.org/firefox/addon/stylish/

Itunes on windows 7 pc not responding

What can I do about itunes on windows 7 pc not responding?

Hello whitesend3,
It sounds like you are opening iTunes and it is immediately becoming unresponsive. I recommend the troubleshooting in the article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with this section, and then the additional troubleshooting in the article if you need it:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
All the very best,
Sterling

My I-Tunes fails to open in Windows 8.1 not responding is all I get

My I-Tunes fails to open in Windows 8.1 not responding is all I get is this the best Apple can do for it's customers

Is that attitude the best that you can do when asking for help from fellow users?
Try dropping the attitude or help yourself by searching the forums.

Satellite A200-TH7 - Windows Explorer is not responding

On random occasions (normally when I wake up the PC), and I click the volume control in the taskbar, nothing will pop up.
Then I'll go to move the physical volume control slider and nothing will happen.
However, at that point, I'll try to click anywhere on the taskbar, but it freezes and it says "Windows Explorer is not responding" and I have to restart the program. Once doing this, the volume control does not even appear on the taskbar. And if I slide the physical volume slider, Explorer freezes once more.
I have Vista and its an Satellite A200-TH7.
I have the volume on mute so I literally can't listen to anything now.
If I restart the comp it'll work, but this problem occurs frequently.

Hi
Thats strange and I never heard about such an issue.
Does the Explorer freezes in other ways too?
Anyway, you should make sure that you have installed all Windows Updates and Service Packs.
Furthermore update the AntiVirus software and search for Viruses.
And follow the instructions posted by Jimi.
Thats all I can say at the moment.

Windows 10 - Skype not respond when I change language with Grave accent

Windows 10 - Skype not respond when I change language with Grave accent

Switching languages quickly in Windows 10 with the current version of Skype is a known issue. Hopefully a future update will address the problem.

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Program in windows 8.1 "not responding"

I have an Imac computer and have installed parallels desktop 9 for mac. I also installed windows 8.1. When I download programs in windows 8.1 sometimes I get the message "not responding". You can use the program but then you get the message "not
responding" and then it is gone and you can use the program. How can I solve this problem.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Bridge CC 64 Windows 8.1 not responding

Installed Bridge CC 64 on a new computer running Windows 8.1.
Intel i5 - 4440S
8GB Ram
Intel 4400 Graphics
Installation went fine. Opens a little slow but what ever you click on, pull-down menus, Computer, Folders I get a "not responding" error at the top of the screen. After about 15-20 seconds the action clicked on will finally work. When I log out of my profile and log into the guest log in, Bridge work fast and perfect. There must be a program or file conflict in my regular profile that is interfering with Bridge. Any ideas where I can start to look?
Thanks

same problem. did you find solution?

Issue opening or creating new files in illustrator CS5 windows 7 64bit, "Not Responding"

Issue opening or creating new files in illustrator CS5 windows 7 64bit, program becomes "Not Responding" when opening a file.
I had recently tried a trial version of FontExplorer Pro X, and this issue has come up after the Uninstallation of that program. Any suggestions?

Check for ant third party plugin in the plugin folder....?
Also Check in the new user account?
Message was edited by: Manish_1988

IPod not showing up in Windows explorer / iTunes - not responding to reset

I have updated my new (1 day old!!) iPod nano to the newest firmware (1.1.1.)... and now I can't use the iPod anymore.
It doesn't show up in Windows Explorer. When I try to connect to it via Run, it says: 'E:\ is not accessible. The file or directory is corrupted and unreadable'
When trying to open Windows Explorer, it freezes - not showing any harddrives.
When trying to connect to it via CMD (dos)... It reads: 'The file or directory is corrupted and unreadable'
I have tried all the soft resets, hard resets etcetera. I have uninstalled the USB driver for iPod, uninstalled iTunes, reinstalled them both, used different USB ports. But still no success.
I can't connect to it via iPod Updater, because Windows won't connect to it.
The iPod itself does respond, although I can't find any data on it anymore.
How do I get my iPod to work again: connect to my windows / iTunes player? Please, any help is appreciated!
iPod nano 4GB Windows XP

I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
If there is another (manual) way to restore the iPod, I would love to hear about it.
As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

Missing icons/ empty windows and programs not responding

Hi all,
I'm posting this on behalf of my brother and I have yet to see the machine but I was wondering if I could get a heads up behalf I get my hands on it.
He is using my old Powermac AGP 450 and a couple of days ago he had problems with the OS. He can boot into tiger but non of the programs are responding, also when he tries to open a folder/window its just coming up with an empty box.
I will have some more info when I get to look at it but for now I wonder if anybody has any suggestions, I'm thinking that the Hard disk is failing.
Any idea's
Thanks

Hi,
Finally got to look at the Mac and it seemed to be running as normal but the big problem was that words were missing on the menu's and also when programes were running, it almost seemed to me that it couldn't find certain fonts so it didn't bother showing them at all. Disk utilitly didn't show any problems so I did an install and archive and this solved the problem.
Thanks for the help

Offline file issues with windows 8.1 not responding

Hi,
I am trying to make a teachers home folder available offline so the teacher can access his work at home. I am using windows 8.1, and offline files is enabled. When I select the folder to make it available offline nothing happens, usually it should go through
a process of making the folder available offline.
Any help or advice will be helpful
Thanks in advance

Hi,
Please check the offline setting in Sync Center first.
Open Control Panel, then type offline in
search bar and press Enter.
Make sure Offline file is enabled.
Also you can try to use a little txt file for test if it could be offline access.
If problem persists, please check Event Viewer if it identify this problem.
Roger Lu
TechNet Community Support

Windows 7 Does Not Respond after it goes to sleep

We are using Windows 7 image distribution through SCCM for our entire organization. Lately, I came across this issue, now becoming more common on all
the systems. The computer won't wake up from sleep by pressing any key, if left unattended for more that 30 Mins (rather after it goes to sleep). A forced Restart is then necessary to return everything to normal. We are using Dell Latitude E series laptops,
as a standard all throughout our organization.
Already tried lot of option like - upgrading the drivers, changing the power plans etc. However, neither of them worked. Any suggestions in this regard
are highly appreciated.
Thanks,
Sam

These type of issues can be solved by performing a startup repair.
http://windows.microsoft.com/is-is/windows7/products/features/startup-repair
additionally this may be helpful
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01853693
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-your-computer-cannot-come-out-of/20ffb7a3-7f0c-46f9-8516-c1e31b11e558
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

AR 11.0.3 "not responding" w/ Windows redirected folders

I recently installed Acrobat Reader 11.0.3 on some Windows 7 Enterprise x64 hosts that are members of a Windows Active Directory domain. When a domain user logs on to any of these computers, a group policy object (GPO) redirects some of the user's "roaming" folders (their Desktop, Documents, Music, etc.) to a file server located on the network. (Note that the GPO only performs folder redirection. Windows' "roaming profiles" feature IS NOT configured or being used.)
:: PROBLEM ::
When a domain user logs on to any of these computers and launches Acrobat Reader 11.0.3 and opens a PDF document, the application almost immediately (within a few seconds) becomes completely unresponsive and MS Windows displays a "(Not responding)" message on the application window's title bar. (NOTE: The application does not crash until a document is opened. If the user launches Reader from the Windows "Start" menu, the app is stable until a document is opened.)
When I log on to any of these computers using a local (non-domain) user account, Acrobat Reader doesn't crash; I can use it normally for hours on end.
Other applications installed on these hosts run normally WRT accessing the domain users' redirected folders (located on the network file server), so it doesn't seem to be a network issue, or Windows configuration issue, etc.
I've tried "Help > Repair Adobe Reader Installation". I've tried uninstalling, deleting all residual folders and temp files, and reinstalling. I've pulled the hard drive and virus scanned it with a "known clean" system; no problems found.

You sound like my IT guy. The app only fails when you try to VIEW a PDF file. The error information is as follows:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AcroRd32.exe
Application Version:          11.0.4.63
Application Timestamp:          522888c1
Fault Module Name:          AcroRd32.exe
Fault Module Version:          11.0.4.63
Fault Module Timestamp:          522888c1
Exception Code:          40000015
Exception Offset:          000c7e20
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          c37e
Additional Information 2:          c37eace044c7ca1363ee7c4cfb11aae7
Additional Information 3:          946a
Additional Information 4:          946a74b2d618c7ad610e6e719f660649
We have tried to 'repair', uninstall a number of times the past two months... the only thing I can do is print each file. PLEASE HELP

Windows 8.1 Not Responding

Similar Messages

Maybe you are looking for