Windows 8.1 Not Seeing Ubuntu Server

I have been running a file server with Ubuntu Server 14.04.1 as the OS and Samba 4.1.6 to share the files. I was able to connect to the server and access all of its drives from both my desktop and laptop running Windows 7. I
upgraded my laptop to Windows 8.1 Pro and am now unable to connect to the server or its drives. The server does not show up at all during network discovery.
I am still able to connect to the server and drives from my desktop that is still running Windows 7. I tried connecting via a direct path from my laptop and got error 0x80004005 and Windows cannot access \\Server message. I have verified
that the laptop is on the same workgroup as the server and file sharing is turned on and works for connection to my desktop. Is there a new setting in Windows 8.1 that would block my Ubuntu server?

Hi Kylep,
First, you should check whether the "TCP/IP NetBIOS Helper" in services panel is turned on, the TCP/IP NetBIOS Helper service provides support for the NetBIOS over TCP/IP (NetBT) service and NetBIOS name resolution for clients on your network,
enabling users to share files, print, and log on to the network.
Besides, you can try to reset TCP/IP if you are still faced with the same issue:
To reset TCP/IP
http://support.microsoft.com/kb/299357
Regards
Wade Liu
TechNet Community Support

Similar Messages

Windows Vista does not see my Ipad but it always did prior to this attempt

Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!

Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

VPN Connected but can not see folders / server

I have established a connection between an OSX server and client but now can not see the server or any services on the client. There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
Details
- Using 10.6 osx server and a 10.6 client.
- Connected via VPN, L2TP
Thanks,
Brian

I have connected to VPN but can't see anything on my finder or desktop.
I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
doesn't work. I get error message saying:
Connection Failed
The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
help!!

Windows 7 does not see other computers in My Network Places

Hi all,
I have a weird issue with a behavior of Windows 7 machines. The setup is as following: domain with WinSrv 2008R2 DC-s, functional level of the domain is WinSrv2008R2, there are Windows XP and WIndows 7 machines on the network. Users use My Network places
to access shares on other people-s PC's. Everything was fine while we had WinSrv2003 domain controller. After it was upgraded to WinSrv2008R2, Windows 7 machined cannot see all of the computers in My network places. To make things even worse, there are no
rules - some Win 7 machines see others just fine, some see 30 PC's (out of 100), some see all after doing a refresh...all sorts of different situations. I have no idea where else to look. Can it be some DNS setting that I missing? Any help is much appreciated
Dino

Hi Dino,
As I known, by default computer browser service is not started in windows 2008 server and higher OS.
You should enable NetBios over TCP/IP on the NCI settings and start the browser service in the services.msc and it should show you all the list of computers connected on
network.
we should enable Network Discovery in the Network and Sharing Center first.
Please also temporarily turn off firewall on each machine.
In addition, please modify relevant settings on Windows 7 machine.
a. Click Start and open Control Panel.
b. Open "Network and Sharing Center" and click "Advanced sharing settings".
c. Expand the current network profile (such as "Home or Work"), and then select the following options:
"Turn on Network Discovery",
"Turn on file and printer sharing",
"Turn on sharing so anyone with network access can read and write files in the Public folders",
"Turn off password protected sharing"
If the issue persists, try to access another computer by entering
\\computername in the Start Search box. Let us know if it works properly.
For a test, you may also disable IPv6 in adapter properties.
a. Click the Start Button, type "devmgmt.msc" (without quotation marks) in the Start Search box and press Enter.
b. Double click to expand "Network Adaptors".
c. Right click your network card and click Properties.
d. Click Advance tab. High light Speed & Duplex
e. If you would like to use the full functionality, please set the Value to the highest Full.
f. Click OK.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

HT201302 I have a large video on my ipad that I would like to transfer to a computer. But my computer (using various software that came with Windows 7) does not see this video, although it sees all the other videos on my ipad. This video is too big to t

I have a large video on my ipad that I need to transfer to my PC (a window 7). I could also use a windows 8 if that would help. But all of the applications I have tried do not see this large video (52 mins) even though they transfer smaller videos fine. The ipad will not let me trim the video, saying it is too large. This is true even though I only want to trim the original, and not create a new video. (Actually it refuses before it gets to the choice of creating something new or just eliminating something from the original). I have been to an Apple store, but the people there only could recommend that I try some alternate applications to do the transfer (Kodak EasyShare). I don't have much faith this will work. I think I have this application on an old PC, and it is not something I want on my new computers.
Is it possibled the size of this video just violates the transfer formats for files over USB? If so, I will just delete the video and move on. But the video is really something I wanted to save. I would be happy to eliminate most of the video, but the ipad will not let me trim it.
I also tried to import the video with Windows Moviemaker (free with W7). It also does not see this file, but works fine on the other videos on the ipad.

How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
 Cheers, Tom

Window 8 does not see my iPhone?

Can any body help. My iPhone is shown as connected on my laptop but iTunes dies not see it. Window 8 system.

iOS: Device not recognized in iTunes for Windows

Windows 7 does not see Time capsule as backup

I've followed a few threads regarding this issue but none of the solutions posted worked for me. I've installed Windows 7 through bootcamp and installed the drivers correctly (I think) using the usb stick for my MacBook Air.
The problem I'm having is that when I try to setup my Time Capsule as a backup for Windows 7, it does not see it under drives or under network. But strangely enough, Windows 7 does it see it under my computer as a network drive: Z:. I can even access the drive with no problems.
Does anybody have any suggestion as to how I can fix this issue? I'm running Windows 7 64 bit on the MacBook Air recently refreshed running an i7. The Time Capsule is on firmware 7.5.2 and AirPort Utility is version 5.5.3

I thought I was going to be able to see TC from my PC after reading this thread, but it seems I still need a pad on he shoulder. Here's what I've tried so far:
From MAC, Airport Utility, I
1) Clicked the “Enable File Sharing” checkbox
2) Set the “AirPort Disk Guest Access” to: Read and Write
3) Set my PC workgroup as MSHOME, just like on my PC.
My TC's name is "Frank's Time Capsule". In the PC world, I think this translate to "Franks-Time-Capsule"
From PC, I attempted to map the TC as a network drive. Start>Computer Right-Click>Map Network Drive...
I tried the following combination:
://10.0.1.1\Franks-Time-Capsule
://10.0.1.1\Franks Time Capsule
No success: "The network path could not be found"
I then changed the name of my TC's drive to "TC" only.
://10.0.1.1\TC
Still no success: "The network path could not be found"
My question, is
What is the exact path for mapping the TC as a network drive?
What are we mapping? The drive name or the TC name?
Thank you so much....

Windows xp does not see airport express

I run an airport express as a base station in my apartment which works fine both for my iMac and my Palm pda. But a friend is visiting me presently, and her windows laptop, running XP, does not see my wifi station, although it sees others in the area. I tried removing security but that made no difference.
Is there perhaps was something that had to be ticked in the airport base station setup to enable Windows laptops to see Apple wifi? As for example when I send attachments in Apple Mail I have to tick a box to make them Windows-friendly.

I use Airport Express... two Macs and another laptop running Win XP and couldn't get the Win to see the network until I changed to a different card, a D-Link Airplus. I think it was all of $19.95 and works like a charm...
Also, in Airport Admin Utility/Network, make sure you have:
Distribute IP addresses checked and where it says; Share a single IP address using DHCP and NAT, click the pop up menu and select: Use 10.0.1.1 addressing.
Also, her Win might be picking up interference your iMac or Palm doesn't... try a different channel:
By default, the AirPort software automatically selects the best available channel when the base station is plugged in. If your base station is experiencing interference, try changing the channel it uses.
To select a different channel:
Open AirPort Admin Utility, located in Applications/Utilities.
Select your base station and click Configure.
Enter the base station password if necessary.
Click AirPort, and then choose a new channel from the Channel pop-up menu.
Carolyn
Message was edited by: Carolyn Samit

EP not see MDM server

Hi Gurus
When I create a new MDM system in a Portal Content -> MDM Connection Wizard on step 4 (Select Repository) I cannot select any MDM repository because the drop-down empty. So I cannot finish the wizard and create a new MDM system reference in EP.
My EP (NW 7.00 SP13) and MDM Server (5.5 SP6) are running on the same host. In MDM Console I can connect to my MDM server and see the MDM repository mounted to it.
What is the problem with the MDM Connection Wizard? Maybe I specified the wrong properties on steps 1-3?
Please, help!
Thanks and Regards,
Sergei

>1. Verify that you have deployed the correct SCA files i.e. of compatible version with that of MDM Server
>2. Only running repositories would be visible in the drop down
>3. Try passing Server IP instead of Server Name
1. How can I check this? I deployed the following SCAs: BP_MDM_TECHNOLOGY (5.50.6.0), MDM_JAVA_API (5.50.6.0) & MDM_WEB_UI. My MDM server seems a little bit newer: it's version is 5.5.64.92. Can it cause the problem?
2. Yes, MDM server is running and the remote repository is loaded too.
3. I've tried this. No any changes in behavior.
In general when I come to the step Select Repository I do not see any delays. It seems the EP's wizard does not even try to connect to MDM server host which I specified on step 3. If, for example, I specify any unreachable wrong MDM Server host and go to step Select Repository it'll appear immediately without any connection attempts to the wrong host.
Maybe something need to be configured additionally? What I did was I installed MDM Server + Console, started the MDM server, created and mounted MDM repository located on the remote MS SQL Server, then I deployed the SCAs mentioned before and restarted my J2EE server.
Thanks and Regards,
Sergei

Windows 8.1 not seeing USB drive on router

hi
if use windows 7 i can acess my router usb drive but when use windows 8.1 cannot see it
but if i do that
Control Panel - Administrative Tools - Local Security Policy
Local Policies - Security Options
Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only
Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption
Reboot all machines after making the adjustment.
it appears for sometime and even acess it to but disappear later any help
Thanks

Hi,
According to your description, I check this setting in my system, it shows "Modifying this setting may affect compatibility with clients, services, and applications". I think your problem most probably caused by driver compatibility problem, it would be
better to check USB router driver edition, also check its official site if there dirver compatible with Windows 8.1.
Roger Lu
TechNet Community Support

Clients Not seeing DHCP server at branch office or not accepting ip offers (NO LOG REPORTS KIND OF IN THE DARK)

Hi there i am having an issue that has popped up recently i have a DC at a branch office that is connected to the main office DC via a Persistent Demand Dial connection in RRAS. Everything was working properly according to me until i found out that the Network
Admin who manages the branch office network failed to notify me that client machines weren't getting IP addresses from the DHCP server. This server was recently installed and wasn't fully implemented till about a week ago when i configured the Demand Dial
connection in RRAS up until that point it just had a regular old VPN connection to the main office while we worked out the kinks with a few things. the things ive tried so far to get DHCP working are as followed
1.Rebooted the branch office server (MULTIPLE TIMES)
2. Uninstalled the DHCP Role and re-installed it....To my surprise 1 client managed to get a ip on its lan adapter after DHCP was re-installed but nothing else
3. Disconnected the connection between the main office DC and the Branch office DC as i figured the main office DC DHCP server might be interfering with the branch office DC DHCP Server but nothing happened
4. Unauthorized and Reauthorized the main office DHCP server and the branch office DHCP server nothing changed
5. sifted through multiple log files on both servers and found noting in fact DHCP logs are empty on both servers
6. restored backups of the DHCP servers from when they were working
7. came here cause im out of ideas and im pulling my hair out
here are the current statistics from the problem server
Start Time: 7/12/2014 2:02:10PM
Up Time: 1Hours, 18 Minutes, 41 Seconds
Discovers: 90
Offers: 90
Requests: 2
Acks: 13
Nacks: 0
Declines: 0
Releases: 0
Total Scopes: 1
Total Addresses 253
In Use 2 (0%)
Available: 251 (99%)
Id like to add that RRAS was getting IP addresses from the problem server up until the point i uninstalled the role and re-installed it
heres is a ipconfig /all from the problem server
Windows IP Configuration
Host Name . . . . . . . . . . . . : MNB-DC
Primary Dns Suffix . . . . . . . : VTEACR.LOCAL
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : VTEACR.LOCAL
PPP adapter Remote Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Remote Router
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.141.70.25(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 10.141.70.10
NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-16-35-AB-D3-05
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d9e:daa4:34dd:db44%10(Preferred)
IPv4 Address. . . . . . . . . . . : 10.141.80.102(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::226:5aff:feb7:5b3c%10
10.141.80.1
DNS Servers . . . . . . . . . . . : ::1
10.141.80.102
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 169.254.238.243(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{427DF66B-3B30-40B1-B67E-B5587465C
394}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.ziricom.com
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{BE201060-A9B9-404A-8361-F8FFB82F5
6F6}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 15:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 16:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #7
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 19:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.ziricom.com
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
if anymore information is needed please let me know i have full access to everything on the network so its not a problem and i am able to remotely access the branch office DC and all computer and switches at any time of the day
Viper Technologies Computer Repair Putting The Venomus Bite Back In Your Computer We Are Located In Antigonish ,NS Canada Check Us Out HTTP://WWW.VIPERTECHNOLOGIES.TK

Hi,
Does this issue occur on one client or multiple?
Please check this article:
http://technet.microsoft.com/en-us/library/cc757164(v=ws.10).aspx#BKMK_5
Regards.
Vivian Wang

Macbook w/10.6.8 not seeing print server

So here's the problem with 2 of my macbooks with 10.6.8 on it. We recently set up a new print server and is working for all of our other laptop of same the vintage except for 2 of them. I've redone there network settings-that's fine. I've rebound them to our network-that's fine too. I've reset the print system-that's worked perfectly with all of the other laptops except these 2. I've cleared the MCX cache. Deleted CIJScannerRegister.plist. I've even reset the pram and smc just to be complete about it but still none of the printers for that building show up (that do show up for all the other laptop of same model and also 10.6.8)
What am i missing?
Also, i've verified that the 2 laptops are indeed in the correct print group in WGM.

Hello CMattos,
Thank you for the details of the issue you are experiencing with printing from 2 of your MacBooks. You have taken some really good troubleshooting steps already. I found an article with a few additional steps you can take. I recommend following the steps below (you can skip the steps you have already taken):
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 8.1 Not Seeing Ubuntu Server

Similar Messages

Maybe you are looking for