Windows 8.1 not seeing USB drive on router

hi
if use windows 7 i can acess my router usb drive but when use windows 8.1 cannot see it
but if i do that
Control Panel - Administrative Tools - Local Security Policy
Local Policies - Security Options
Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only
Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption
Reboot all machines after making the adjustment.
it appears for sometime and even acess it to but disappear later any help
Thanks

Hi,
According to your description, I check this setting in my system, it shows "Modifying this setting may affect compatibility with clients, services, and applications". I think your problem most probably caused by driver compatibility problem, it would be
better to check USB router driver edition, also check its official site if there dirver compatible with Windows 8.1.
Roger Lu
TechNet Community Support

Similar Messages

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

New Airport Extreme (2014) does not see USB Drive

Just fired up my new 2014 Airport Extreme and attached a Toshiba 3 TB USB Drive. My new (late 2013 iMac) does not see the new drive in Disk Utility.
The Extreme works in all other ways; ie, as a router, as a wireless node.
It came to me formated as a Windows drive, so I attached it directly to my MacBook Pro (which saw the drive) and reformated it as a Mac Drive (Journaled, GUILD). It showed up just fine on the MacBook Pro desktop.
When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
Help Please

When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
That drive will not show up in Disk Utility on the Mac.....since the Toshiba hard drive becomes a network drive when it is attached the AirPort Extreme.
Disk Utility will not display a network drive. It will only display drives that are connected directly to your iMac via USB, FireWire, etc.
Check using AirPort Utility to see if the AirPort Exteme recognizes the drive.
Open AirPort Utility, click the AirPort Extreme icon, then click Edit
Click the Disks tab at the top of the next window that appears
The drive will appear here if it is recognized by the AirPort Extreme.
In the example below, my WD Drive is connected to the USB port on the AirPort Extreme.

Time Machine will not see USB drive attaced to AEBS

I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates. Any help is appreciated.

have you tried formatting the drive, by selecting the disk or volume and using extended (journal). If the drive use to be a PC drive, you need to also give it a new index table. To give it a new table, you got to go to the partition section and use the option button. There will be 3 types, the GUID table is for intel macs, the 2nd selection is for PPC macs, and the third is for Window/Dos. You want to use to GUID table. After the table is set, format the disk using extended (journal).

AirPort Extreme Does Not See USB Drive

I've had no luck getting my AirPort Extreme (802.11n) to see a USB hard drive. Using a WD MyBook, there's simply no response from the AirPort. Is there some trick to getting the AirPort to see the drive? Clearly this product isn't working as described! There's no mention in any of the marketing materials of needing to do anything but plug in the drive to the USB port.

This whole 'mount USB drive' feature appears to be VERY problematic. I cannot get the drive attached to my Airport Extreme to be visible to the iBook which runs its net connection thru the AE unit.
Has anyone submitted a bug to developer.apple.com?
If you have not - it is possible to acquire a free developer's account - just fill out the forms - and then you can add your voice to the chorus of bugs posted - which is WAY more likely to get attention by Apple engineers than just posting on this forum.
If anyone has any news about how to systematically solve this problem, please let me know.
Thanks!
Lance Drake
G5 DP 2GHz Mac OS X (10.4.8) G4 iBook Airport Extreme Iomega USB 160GB drive

Can not see usb drive

i am unable to see my usb drivr in application mcintosh folder

Finder > Preferences > General Tab > check External disks

How to reset Windows 7 Administrator Password with USB Drive

The first thing we often do When we *Lose Windows 7 password* is asking a computer expert for help. However, it is only a moment for you *forgetting Windows 7 password* and it may take you several days to regain access to your system. From now on, don't worry about anything when you forgot windows 7 password. The article will give you some ideas to *reset Windows 7 password* with USB Drive.
*Section One: Reset Windows 7 password with Password reset disk.*
Most people usually only know how to create a new user with a strong password or change it. But they don't develop a habit to create a password reset disk for preventing lost password. It is a great and free gift from Microsoft. Click here to learn how to create password reset disk in windows 7 If you ready have a reset disk, please follow steps below:
Step1: Start or restart your computer, insert your USB. In the welcome interface, press ctrl+alt+delete twice, get into the classic log on box. Then type the user name that you want to use and a wrong password or leave it blank, and then press ENTER or click OK.. it will show you logon failed.
Step2: Click *Reset password*...... it will show you the Password Reset Wizard. And it enables you to create a new password for your user account. In the Password Reset Wizard dialog box, click *Next*.
Step 3: Chose the disk which you insert, click *Next*. Type a new password in the Type a new password box, and then type the password again in the Type the password again to confirm box. In the Type a new password hint box, type a hint for the password or not, and then click *Next**→**Finish*, and then try to log on to Windows XP again when use the new password you just set.
This *USB Password reset disk* only use in a certain account which you have created before, or it won't help. So it's better to create a password reset disk when you add a password to account.
*Section Two: Reset Windows 7 password with Windows Password Rescuer run from USB drive*
If you haven't created a password reset disk for your account and unfortunately you lost or forgot windows password, see bellow. I will show you step-by-step guide to do this task in several minutes with USB, without reinstalling system or losing any data.
Step 1: Prepare a 2GB USB flash drive and a computer which you can access to.
Step 2: Download Windows Password Rescuer Personal and install it to a computer which you have access.
Step 3: Run the program and burn the ISO image to the USB Flash Drive.
*NOTE:* This action will make your USB drive be formatted and all your data in it will be lost. You'd better provide one with nothing in it.
Step 4: Use the USB to reset windows 7 password. Before this step, you must set your computer boot from USB. Then start your computer, and you will enjoy the process of resetting the password, it is easy and quick. Don't worry if you have difficulty to bios setting, you can see more in the Windows Password Rescuer website.

Very interest posting. Thank you for this detailed description and useful links.
If you have more interesting stuff to share with us you are welcome.

Windows 7 will not recognize network drive on airport extreme

Good day. I created a network drive using a WD my book 1tb hard drive. I formatted it to fat32. Windows 7 does not see the hard drive, but the WD software can find it and the apple extreme router can also see the hard drive. Any help would be appreciated. Thanks

Hi 2pfspiff,
To verify if you can connect to the drive at all, you may want to try to manually mount it from the Windows machine. The following article has some generall steps for mounting an Airport Extreme USB hard drive under XP and Vista, but the steps should be similar under Windows 7.
AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
http://support.apple.com/kb/ht1331
Cheers,
- Brenden

Airport Extreme will not show USB drive installed Solved!

Airport Extreme will not show USB drive installed Solved... At least for me!
Here's what I had to do to make it work with the newest 7.3.1 firmware.
Ready for this? No Joke Really!
1. Connect your USB drive to the Airport Extreme.
2. Turn it on.
3. Open the Airport Utility.
4. Go to Manual Setup.
5. Choose Disks and File Sharing.
Yep, we are going to set file sharing before we even see the disk we want to share!
You (I) had to set File Sharing on and Share Disks over Ethernet checked as well as set the Work Group (In my case). THEN restart the Airport Extreme.
After it re-started... My USB Drive was now present and ready for use.
I also dis-allowed Guest access. I re-started ALL computers in my network, both Windows and MAC. The USB drive held and works GREAT!
I know... Most of you thought this was a joke, It's not!
I tried everything to get the USB drive to work and failed every time just like most other people. Doing it this way worked like a charm.
Go Figure huh!
Hope this helps someone with this issue.
Message was edited by: DonaldH

How was the usb hard drive formatted? Was it NTFS, FAT32, or HFS+?

Windows Vista does not see my Ipad but it always did prior to this attempt

Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

Windows Won't Boot With USB Drives Attached

I just installed Windows 7 on my Mac mini but it won't boot into Windows automatically if there are USB drives attached. I have to hold down the option key at boot time and select the Windows partition manually for it to boot, unless I remove the USB drives first, then it will boot into Windows on its own. Does anyone know how to fix this annoying problem?

Sounds like your mini is set to boot order: boot from USB first.
On a PC you could go into BIOS and change boot order and enable/disable USB booting.
Not sure why or what is on the USB bus, type of drive and device that could also make a difference (and not be universal to the Mini)

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!

Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

Unknown USB Device in Windows - VISA does not see it

Hello,
I'm trying to connect my STM microcontroller to my computer using USB protocol and VISA software. When I plug STM USB device into USB port Windows sees it as unknown device and can not find any driver for it. I assume that this is situation VISA was created for. So I want to use a driver wizard to create driver for this device, but VISA does not display it in a device list. I tried to create and install driver for my device as if it was not connected, and installed created driver manually but it did not work.
Is it possible that Windows detects a USB device and VISA can't see it?

It actually depends what sort of USB device it should be. If it is a COMM USB class device, Windows should be able to pick it up directly as serial port, if it is some proprietary USB class, then you either have to get a driver installed and access that driver somehow, or create an INF file with the VISA driver wizard for it and write the driver yourself in LabVIEW using the VISA USB Raw interface. Without a very good description of the low level USB protocol however this last option is a complete no go.
If the VISA driver wizard doesn't display the device in the list then Windows has already claimed it somehow.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Windows 8.1 not seeing USB drive on router

Similar Messages

Maybe you are looking for