WINDOWS 8.1 NOT WORKING

I recently bough windows 8.1 and after converting the file to an ISO in disk utility and partitioning it, i started in windows. But after writing my product key and choosing to upgrade to windows 8.1, it tells me to restart my computer. after doing so i repeated all the steps and it tells me the same thing again and i need to restart my computer again. What do i do as i need windows pretty urgently? PLEASE HELP

There are four reboots when BCA is used? Is it asking the same questions repeatedly?
Please also see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Similar Messages

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Self.close() or window.close() both not working in iOS8.0.2 safari

Both these function(self.close() and window.close()) are not working in safari.
These methods are used to close the tab currently opened.
So, if there is any workaround for this.

if you have programming questions then you should likely post them in the developer forums rather than the normal forums
Developer Forums

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Satellite A300-1EH - windows installer does not works accurately

Hello, this is my first post on this forum!
My windows installer does not works accurately.
What to do?
Soryy but i dont now much about computer systems.
Have I to reinstall this installer?
I'm waiting for your replys.

>My windows installer does not works accurately.
What do you mean exactly? Do you see some error? What happen exactly?
Maybe your CD is scratched or damaged.

Windows 7 Updates not working since Infinity insta...

Hi All,
I've had Infinity for a week and Windows updates have not worked since. My permissions are the same and i have Admistrator access.
The error code is 80070005
I have done a system restore which has removed Explorer 9 and am still having the same problem
Can anyone help me?
Thanks
Amanda

Same as the others my Win7 updates ok.
Hi,
The error code 80070005 usually means that you do not have enough permission to install updates.
First please confirm you have logged on an account with administrative privileges.
I suggest you to reset Windows update components and run Fix it.
Visit this link for information on how to reset windows update components:
http://support.microsoft.com/kb/971058
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

Is it me or?, Window Buttons Do Not Work When Clicked

Is it me or?, Window Buttons Do Not Work When Clicked
What is going on in Snow Leopard.
It seems Window buttons (X, -, +) Do Not Always Work when clicked.
Sometimes window does opens, closes, minimizes and often times it does not.
You have have re click like crazy
Message was edited by: macguitarman

What app are you using?
Here's something strange I've noticed in Mail a couple times.
For some reason Mail opens several viewer windows all stacked on top of each other.
So while click the close button does close the window, there's an identical on behind it.
So it almost seems like clicking the close button has done nothing but it really has.
Could this be what your seeing?
Matt

Per window private browsing not working, still sharing cookies

Firefox 21, per window private browsing not working. The cookies are still shared among private browsing windows and tabs. Even with private tab addon, still not working.
If I log into google in one tab, I am still logged in with that account in new private tabs and private windows.

One more question about cookies in private browsing mode.
I don't like browse a web using usual mode 'cause I don't like tonns of sites in a history. But when I start with private mode every time I get empty set of cookies and this was not quite good for me 'cause some sites store its options needed for me. In a prev. versions of FF I solved this issue in such a way: I stored some cookies in a file and every time I started private browsing I loaded them from file. But now this method gives nothing: in cookies manager all set of "non private" cookies is shown both before importing and after importing them from a file and I need to reconfigure my sites every time I start private browsing.
I'm sorry for my English.

Windows Live Application Not Working

I got a nokia n81 8gb firmware v 21.0.010 downloaded the Windows Live application from the download section on my phone it downloaded started installing after it finished i got an error message Unable to run application. restarted phone tried to run it from Applications folder not working. uninstalled redownloaded and installed same problem. any help appreciated, thanks.

A friend of mine downloaded the same application and its working for him. but when he clicked the download button he was offered to download and install Nokia Web services Support Package and Nokia Internet Services Support Package before downloading and installing the Windows Live application itself. i did not get any prompt for downloading or installing any kind of application before installing the messenger itself thats why its not working coz obviously it needs those files to work. is this some kinda mistake or ? i dont get it how am i suposed to get those packages to make the application work if i cant get them from the download application ? any help appreciated. thanks alot

Window.event does not working in Firefox 4.0 and also window.event.ctrlKey ?

hi,
I'm using Microsoft virtual earth map 6.2 (bing Map) in my application.On map showing number of images.On Each image there is onClick event that select image if user press left mouse button while holding Ctrl key .For this I wrote java-script function where I'm using Window.event.button (To check mouse button) and window.event. ctrlKey(To check control key) But these both are not working in Firefox 4.0 ,the same is working in Firefox 3.6X version perfectly.
Thanks

The same problem is in Firefox 5.0 version too

Remote Desktop and Windows Firewall Settings Not Working,

Hi to all....
In My office am using Windows 7 ultimate x64 OS,Remote Desktop is Not working for Reason is Firewall is Turn on,i go to Control Panel Settings to turn off the Firewall,But Firewall Setting are Not Working
i Traced the Event Viewer its shows Error Code 5, Am search any patches for this error but cannot find it, Any one Advice Me.....i Hope Your Valuable Reply.....

Hello,
this forum is related to Windows Server. For Windows 7 please ask in
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Windows 8 Trackpad Not Working - Other Solutions Didn't Help

Hello all,
I recently installed Windows 8 Pro 64-bit on my Mid '09 MacBook. I had Windows 7 and 8 installed before and working, so I know it is compatible. Unfortunately, my trackpad does not work at all; No clicking, moving, nothing. I tried other solutions like changing the driver to the USB Input Device, but that will not work. I manually installed the 64-bit drivers from BootCamp v5. Here is a picture of my Device Manager: http://puu.sh/2Abyy
As you can see, I am missing drivers for my Coprocessor and an Unknown Device (Which I believe is my Trackpad, but it could be something else)
Thanks in advance for your help.

The update to boot camp is now available!
Just installed Windows 8.1 Pro to my MacBook Pro, Retina, Mid 2012, OS X 10.8.5: Memory 16GB 1600MHz DDR3
http://support.apple.com/kb/dl1638
Boot Camp Support Software 5.0.5033
This solved the Trackpad Right Clicking issue (not working) as well as tapping.
The wireless and network connectivity issues where resolved as well. The Boot camp support software enabled a boot camp control panel available in the windows 8 system tray and from there you can enable the track pad to tap and use the secondary click.

HT1349 iTunes and Windows 8 will not work!!! Please help!!!

I just purchased a new sony vaio laptop computer with Window's 8 and I have uninstalled and installed itunes over 5 times and it will not work. When attempting to open it, a box pops up that says "ITunes has stopped working: A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.". I have motified the compatibility under each selection, I have changed my securing options and nothing works. I am overwhelmed and frustrated with this issue!! Please help how to make this work, so disappointed with itunes!!!

I have the same problem!

10g forms developed using windows machine is not working in Solaris machine

I have developed a form using the following version of Oracle Developer suit 10g Fomrs using WINDOWS machine.
My Application server is in a SOLARIS machine. All the .fmx are copied in the same SOLARIS machine in a directory.
I have copied the form (.fmx) in the same directories where the other forms are, in the SOLARIS machine.
Now i click on the menu item (menu item was already present there before developing the form in the menu. I did not have to create a new menu item in the Menu) in the windows machine.
The form doesnt appear.
Could you please tell me wheather i have to compile the form that i have developed in WINDOWS machine in some format of SOLARIS machine, or I have to do something else so that on the click of Menu item in Windows machine that form appears. Or Ihave to develop the form using SOLARIS machine?
Please help me.
I am working on the following version of Oracle Developer suit 10g Fomrs
orms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production

hi
still its not working
Please I need help
bash-2.05$
bash-2.05$ /u02/oradata/data/PROJ/APPS/bin/frmcmp userid=xxx/xxx@xxx batch=yes module=AB.fmb module_type=form compile_all=yes window_state=minimize
FRM-91500: Unable to start/complete the build.
bash-2.05$
I have set the following environment variables.
LD_LIBRARY_PATH=/u02/oradata/data/PROJ/APPS/lib32:/u02/oradata/data/PROJ/APPS/jdk/jre/lib/sparc:/u02/oradata/data/PROJ/APPS/jdk/jre/lib/sparc/native_threads:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/lib/sparc/client:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/lib/sparc:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/../lib/sparc:/usr/lib:/usr/ccs/lib:/u01/oracle/product/10.2.0/lib:/usr/lib
ORA_NLS10=/u01/oracle/product/10.2.0/nls/data
JAVA_HOME=/u02/oradata/data/PROJ/APPS/jdk
ORACLE_HOME=/u02/oradata/data/PROJ/APPS
ORACLE_TERM=vt100
FORMS_PATH=/u02/oradata/data/PROJ/APPS/forms
TERM=vt100
PATH=/usr/bin:/usr/ccs/bin:/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/boapp/oracle/product/9.2.0/bin:/usr/lib
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
TNS_ADMIN=/u02/oradata/data/PROJ/APPS/network/admin
OSTYPE=solaris5.9
regards

Dynadock u3.0 windows 8.1 not working

Hi just wondering if anyone can help with the installation of a dynadock u3.0 dock. Trying to install the device and use on windows 8.1 and cannot use at all.
Is there any work around to get it running as I hear it works perfectly on windows 8 but not 8.1 as Toshiba hasn't updated the drivers for the device.

Jerry the solution listed on that link did not work, how ever I managed to get the dock running after installing a older driver from that link. Now though come back and nothing works again, and how I fluked it the first time wont either. I think its a problem with Toshiba drivers and not display links, as I am not getting anything through the dock not even USB adaptors to work. Toshiba needs to fix this problem with there installation software and update this swiftly, as your product is useless

WINDOWS 8.1 NOT WORKING

Similar Messages

Maybe you are looking for