Windows 8.1 on bootcamp not hibernating

I am running windows 8.1 on macbook pro retina.
When I am trying to hibernate it is giving me an error `A device attached to the system is not functioning.(31)`
Any thoughts what it could be related to?

Why my image being replaced with the image above and why I cant edit or delete questonas I asked?
It is kind of stupid.

Similar Messages

Windows 8.1 in Bootcamp not recognising home network WiFi

I am running bootcamp with Windows 8.1 on my MacBook Pro Retina Early 2013. I installed it together with all drivers as suggested by bootcamp.
In Mac OS 10.9.4 I am connected to my home network and can see about 4-5 other networks (from my neighbours).
After booting into Windows, I can see the networks of my neighbours but not my network.
This connection problem occurred only recently. I have been able to connect seamlessly before.
I went through the router settings not finding any restrictions to IP- or MAC-Addresses or a/b/g settings. I tried resetting my router without any luck.
I tried uninstalling the Windows WLAN driver (also disabling), but I can still only see other peoples networks. I tried restoring to an earlier point in time without any luck.
My Kindle and my Nexus 5 connect without a problem to my home network.
Any ideas?

What finally worked was changing the channel of the router. I had my setting on auto and changed it randomly to channel 2, which worked!

Windows 8.1 on bootcamp not updating ?

trying to install windows updates on windows 8.1 on my macbook pro but its just sitting at 0% complete after at least running for hour and half ???? any ideas what this is ? its been like this for days trying to install 11 updates ?

removed windows 8.1 lastnight as my macbook was on a slow go,was struggling to install anything even itunes would not install & was taking at least 2-3 mins to restart on windows side,will reinstall when i get home from my holiday as it felt it was not running very well

Windows 8 installed on bootcamp not working after upgrading to Yosemite!

Hello,
I am a new mac user and recently upgraded from mavericks to yosemite. I had win 8 installed on boot camp before I upgraded.
The windows partition doesn't show up after I try to reboot.
Any help would be greatly appreciated.
Thanks in advance.

Same issue here with my "Mad Catz" mouse "R.A.T. 7".
Switched back to my old Logitech mouse - Problem solved.
I think it's a driver issue so i hope it'll be solved soon.
Torsten

My laptop is Not Hibernating

I have Toshiba Satellite C660-l5012 running on windows 7 ultimate 32bit
Its not hibernating after installing drivers of some device ( I cant figure out the device exactly )
it can go to sleep mode without any problem now,
but before reinstalling windows 7 it was unable to sleep or hibernate ..

As you know, Hibernation takes the current open applications and settings and saves it all to the hard drive prior to shutting down the computer. A number of things can prevent this from happening. One, other applications that will kick in about the same time like the Screen Saver or Sleep Mode. Hardware can also cause problems, like external hard drives and network devices. Also some software, like drivers, can be a problem too.
In your case, time to do more troubleshooting. I would disconnect everything that is external hardware except the power cord. Disable both the Screen Saver and the Sleep Mode. Check Device Manager and see if there is anything with a conflict or anything that did not come with the original out-of-the-factory build. Open up the Task Manager and see what Applications that you are running. Some application may not be closing properly which is causing the Hibernation mode not to run. For testing purposes, close all of the applications and see if you can get into Hibernation.

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

Wifi not working under windows 8.1 with Bootcamp

Hi, I have installed windows 8.1 under bootcamp. it seems to work fine however the wifi connaction is not existing under windows. therefore i can only connect via ethernet. Anyone an idea how to solve it? Thx

Hey there,
I don't know if it's still interesting for you, but I've had the exact same issues. The only solution, as far as there is no official change from Apple, you can install Windows 8.0 via Bootcamp with official drivers for Bootcamp (wifi works great) and then install the upgrade to 8.1 as Windows still uses the former installed drivers from Win 8 on 8.1 as well.
Hope that helped, 8.1 runs even better on my MB Air than Mac OS 10.9 :/

I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
I think the following may help me (In case anyone els is looking):
http://support.apple.com/kb/DL830

How to reinstall Windows 8.1 on Bootcamp?

I am trying to reinstall Window 8.1 on Bootcamp after Disk Utility reported that the hard drive it was originally located on was failing and needed to be replaced. I did so. Now when Windows 8.1 installer launches, it thinks I'm doing an upgrade and insists that I "reboot Windows Normally" and then launch the Installer, which is impossible because it's freshly formatted, NEW hard drive.
Here are the steps that I followed:
1) Disk Utility reports that Boot Camp drive is failing and replace it.
2) Remove failing hard disk, replace with new one.
3) Launch Bootcamp Assistant.
4) Download support drives to USB stick.
5) Begin install process using same Windows disk (64-bit FULL VERSION) used previously.
6) Windows Installer asks for Product Key.
7) I enter product key.
8) WIndows asks to agree to license terms.
9) Setup presents ONLY two choices:
Upgrade Installation
Custom Installation
10) I choose Upgrade.
11) Windows Setup reports that Upgrade can only take place from Windows environment, to eject Windows Install disk, and to reboot into Windows "normally." Cannot eject Windows install disk. Click Close box.
12) Windows Installer relaunches.
13) Install process starts over again.
Please note:
1) This is a fully licensed copy of Windows 8.1
2) I am using it on the same Mac as the original installation. Only change is the hard drive.
3) This is not an authentication issue. Windows accepts the Product Key.
4) Parallels is not involved in any way.
I have talked to several Windows support teams. None were helpful and ultimately said this was a Bootcamp/Apple problem
Apple Support was much more helpful but said they'd never encountered this problem before and were flummoxed.
I have reformatted the Bootcamp hard disk several times. At one point I thought the issue might be that the Mac still thinks the original Windows installation exists because I kept the same name for the new hard disk. Renaming and reformatting did not change the behavior.
Does anyone have any suggestions?

I wound up solving, or at least working around my problem. Selecting "Custom Install", instead of Upgrade, took me to a dialog box where Installer could format the Bootcamp drive from scratch. Installation then proceeded as expected. Unfortunately this cost me my partition, but that was better than being stuck in this Upgrade Catch-22. Note that formatting and partitioning this drive within the Boot Camp assistant did not solve my problem.

Cannot install Windows 8.1 with BootCamp on Mavericks

I have a brand spankin' new Late 2013 27" iMac, fully updated, with a 3TB Fusion drive. I have thrice attempted to install Windows 8.1 via BootCamp 5.5, with the 64bit edition DVD on the SuperDrive, and allotting 1TB out of the 3 available. There are no other partitions besides OS X and the BootCamp partition. The Windows installer successfully begins, but each time it cannot locate any partitions to load itself on. The list is just...blank.
I've already scoured the forums here for support, and tried several claimed remedies, such leaving all USB ports clear (except for the SuperDrive) until after install (even removing the flash drive with the Apple support files), and had a long chat with Apple Care today...they said the engineers would get back to me in about a week. I read somewhere that hard drives over 2.2TB may be an issue, but Apple states that Mavericks has no problem with this, leading me to believe maybe Windows 8.1 is still lagging in this department.
To that end, I recall someone, somewhere mentioning how to carefully partition the drive to get around this, and that Windows absolutely, positively, had to be on the 4th partition, including the hidden partitions such as Recovery, Boot OS X, etc. Only problem is that Disk Utility is showing way more hidden partitions than this, and they seem to be unremovable.
Does anybody have a solution/workaround for this, or are both products still too new to have a found a way to play nicely together?

I did it. After fours hours and two hours on the phone with Apple support, I installed Windows 8.1 to my iMac. So, I just wanted to share it with you.
System:
iMac 2013, 27" monitor, 1T fusion drive, wirless keyboard, magic mouse.
Software:
OS X 10.9
Windows 8.1 full version 64bit
(I skipped some steps such as type in software key, choose language, etc.)
1. For my last try, Instead of using Bootcamp assistant to setup partition for Windows, I used disk utility to create an 100G space for Windows with FAT file system and named it BOOTCAMP.
2. Insert Windows CD into the USB super drive.
3. Shutdown iMac.
4. While press and hold the left "option" key, turn on iMac.
5. Select CD/Windows icon to boot.
6. Choose Custom installation
7. Select the partition named BOOTCAMP (I am not sure why it is 200G; I assigned 100G. Well...)
8. Format
And the rest is history. By the way, when Windows restarts during installation, make sure to press and hold the left "option" key to boot up Windows.
I do not know why but I am happy now. As a matter of fact, I am sending this message from Windows 8.1 running on my iMac.
Good luck to you.

Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

Is it possible to create a Windows 7 Partition via Bootcamp while having an internal RAID 0 Setup ?

Yes, just not on the RAID. Boot Camp Assistant will only partition a single drive containing OS X. You cannot partition a RAID array.

USB gaming mouse unrecognized by Windows 7 Pro (via BootCamp)

Hey,
I bought a Zowie EC1 Gaming USB mouse. But when I plug it into my MacBook Pro 15" running Windows 7 Pro (via BootCamp), then the mousewheel flashes blue shortly for 1 second or so, and the driver installation process starts. After awhile it says hardware unsuccesfully installed. And when I re-plug the mouse in the same USB port it says unrecognized.
I think maybe it's just some buggy drivers? Anybody experienced something similar with other mice maybe? Or know how I solve this problem.
Kind regards,
Simon

I looked around on the web and read a bit about your Zowie EC1. It's a very nice mouse that I need to put on my Christmas list
But it seems that it should be recognized by Windows as a normal USB mouse and install generic drivers. I have a couple of questions:
1) Are there any Windows Updates for your hardware waiting to be installed?
2) Do you have all the Apple Boot Camp drivers installed? Apple just released 3.3 if you're not on Lion (which is 4.0)

ATI HD 2600 PRO WINDOWS 7 64 BIT BOOTCAMP DRIVER ERROR

as with the windows xp bootcamp insatllation my grahics card the ATI RADEON PRO HD 2600 shows up under device manager as the Ati MOBILITY 2600 XT, this is NOT correct and wasnt correct when i had windows xp installed via bootcamp but the online trick/fix worked by installing the newer updated drivers for the ATI RADEON HD 2600 PRO by manually pointing the installer to the newly download drivers for xp and once that was done my card read correctly under the device manegr in xp and my performance was quadrupled !!!! however since i have now installed Windows 7 64 bit,the same problem appears agin but when i download the correct 64 bit windows 7 drivers form the ati site and even the dedicated bootcamp windows 7 64 bit drivers nad attempt to point the installer to them the error appears "This driver does not appear to work with this version of windows" so basically the old xp bootcamp fix doesnt work with windows 7 64 bit with bootcamp running. There has got to be an easy workaround or fix for this! Tons of windows 7 64 bit bootcamp users are experienceing this install error and without the driver being installed and updating the card to what it truly is and NOT THE MOBILITY VERSION THAT IS BEING DETECTED, we can all run games like before in xp with way better performace. until then we are all screwed and are forced to run the updated drivers for the mobility XT card. PLEASE PLEASE HELP US IF YOU UNDERSTAND WHAT I AM SAYING. look around on the apple bootcamp forums and you will see a bunch of people complaining about the same thing with no solution for over 2 years. i have sent an email to AMD formerly ATI requesting assistance but i am sur ethey will just blow me off. this is a very easy problem that could be fixed by a tech savy person. WHoever can fix this problem at least for me personally,i will gladly sned you at least $100 via paypal for your hard work and time. without this being fixed i have no choice but to buy anothermac with a better graphics card since the imac i have is not upgradeable beyond RAM. Like i said this was the same problem with windows xp in bootcamp before i installed lion. the fix worked. i dont want to hear that the card is NOT a true hd 2600 PRO whn i know it is and have succesfully used the driver hack before with awesome results. it is NOT a mobility card whatsoever. it is an ATI RADEON 2600 HD with 256 megs of VRAM,not the best but still ok to run even the latest pc games with bootcamp. Please please help me! Thank you very much in adfvance for reading this!

Below is what I had to do to work around this issue - I've been running with the modified graphics drivers for over a week now, including running some games under Windows 7. Apologies if this is too basic, but I figured I would write it out step-by-step for anyone who needed the background, rationale, plus instructions:
Procedure to manually update iMac Radeon HD 2600 PRO video card under Windows 7 (64 bit).
Rationale:
> Boot Camp drivers incorrectly identify the video card my 24" iMac (24-inch Mid 2007 2.8 GHz Intel Core 2 Duo - the graphics card is shown as a "ATI Mobility Radeon HD 2600 XT") - this has been a long-standing problem when using my iMac under Boot Camp. You can find procedures online about how to update the drivers manually by obtaining them from AMD then installing them.
Background:
> When I was previously running Windows XP, I was able to perform the graphics driver update per the online instructions, without any problems.
> When I updated to Windows 7, 64-bit (because I updated my Mac OS to 10.7 [Lion] and Windows XP was no longer supported in Boot Camp), I could no longer update the graphic card drivers to the Win7 64-bit version (it was giving an error that the driver was not supported) using the same procedure.
> The solution I finally came upon was to modify the INF file that comes with the drivers from AMD. I take no credit for this, except for the fact that I adapted a procedure I found for doing this for graphics cards in notebooks. The original place I found this is here <http://forum.notebookreview.com/gaming-software-graphics-cards/370695-guide-upda ting-your-ati-drivers-manually.html>.
NOTE & DISCLAIMER: This is the first time I have done something like this, so I don't claim to fully understand every step that is going on here, nor if every step is needed. I based this on the procedure referenced in link immediately above and it seems to be working for me (that is, my graphics card driver was ultimately updated for Win7, 64-bit just like had been previously under WinXP) - YMMV.
>> This procedure was done with the AMD Radeon™ Desktop Video Card Drivers for "64 bit Windows Vista/Windows 7 "; Version 11.7, posted 2011-07-27 (main page: http://support.amd.com/US/Pages/AMDSupportHub.aspx)
1. Driver only was downloaded from AMD.
2. Downloaded file was installed to default location: C:\ATI
3. Gather info about the graphics card:
3a. Open the Device Manager (Start>Computer [right-click]>Properties)
3b. Expand the "Display Adapters" item to reveal the GPU (mine was listed as "ATI Mobility Radeon HD 2600 XT", same as it was under XP)
3c. Right-click on the GPU and select "Properties"
3d. Click the "Details" tab in the Properties window.
3e. Click the drop-down under "Property" (top item should say "Device description) - find the item in the list that says "Hardware Ids"
>> There were four values for my card, shown below:
PCI\VEN_1002&DEV_9583&SUBSYS_0083106B&REV_00
PCI\VEN_1002&DEV_9583&SUBSYS_0083106B
PCI\VEN_1002&DEV_9583&CC_030000
PCI\VEN_1002&DEV_9583&CC_0300
3f. Right click on the first value and select "Copy" - paste it into a separate document. I actually copied all these items and pasted them into a separate text document, but only ended up using the first one.
3g. Go back and click the drop-down under "Property" - find the item in the list that says "Inf section" (it was far down the list).
3h. Copy the value shown there and paste into a separate document; my value read: ati2mtag_M76
4. Modify the INF file from AMD:
4a. First thing I did was make a backup copy of the directory containing the files that were installed in step 2 (located at C:\ATI) - my directory was called "11-7_vista64_win7_64_dd".
4b. Go into this path: C:\ATI\Support\11-7_vista64_win7_64_dd\Packages\Drivers\Display\W76A_INF
4c. Find the INF files (icon is a document with a gear on it), that start with "C7..." and "CH..." (mine were called "C7122569" & "CH122569").
4d. Open the "C7..." file (it opens in Notepad). Go down to the section called "[ATI.Mfg.NTamd64.6.1]".
4e. Do a "Find" command for "ATI Radeon HD 2600 PRO" (if you search for a shorter phrase, be aware there are other "2600 PRO" cards in the list).
>> The exact line I found was <"ATI Radeon HD 2600 PRO" = ati2mtag_RV630, PCI\VEN_1002&DEV_9589>
4f. Replace that line with the Inf section value and the first Hardware ID value, using the same format as the orginal line.
>> The new entry I made read:
"ATI Radeon HD 2600 PRO" = ati2mtag_M76, PCI\VEN_1002&DEV_9583&SUBSYS_0083106B&REV_00
4g. Close the file, saving your changes.
4h. Repeat steps 4d - 4g, using the "CH..." file.
5. Updating the graphics driver using the modified INF files:
5a. Go back to the Device Manager and expand the "Display Adapters" item again to show the "ATI Mobility Radeon HD 2600 XT" GPU
5b. Right-click on the GPU and select "Update Driver Software..."
5c. In the resulting window, choose "Browse my computer for driver software".
5d. I navigated to the "C7..." file along the following path: <C:\ATI\Support\11-7_vista64_win7_64_dd\Packages\Drivers\Display\W76A_INF>
5e. At this point, I was shown a window that showed "ATI Radeon HD 2600 PRO" twice (that's all that was in the list). I selected the first instance and it moved on.
5f. I got a warning that the driver was unsigned, obviously I allowed it to move forward with the installation.
5g. The updating proceeded and the screen momentarily went black, twice. After the second time the description in the Device Manager changed to reflect that the GPU was now "ATI Radeon HD 2600 PRO".
FINAL NOTE: as of right now everything seems to be running properly and I have experienced no problems or graphical glitches. If anyone reading this sees an obvious problem with what I've done, please let me know.

Running windows 8.1 through bootcamp

Hi guys, ive been having some issues with running windows 8.1 on bootcamp and i'd really appreciate some help.
I'm using a 13" Macbook Pro with retina display and, because of the lack of a disk drive, i had to use a usb drive to install windows. I had some trouble retrieving the iso file and so ended up starting the installation process on a pc and choosing the option to install through usb drive to get the usb set up (i'm not sure if this has any relevance but i figured it wouldn't hurt to mention that i didn't use the method of preparing the usb drive though bootcamp with the iso file). The process afterward went smoothly enough until bootcamp reset my computer and restarted using the "Windows" driver. When my computer had completely rebooted i was me with "non-syster error" and a prompt telling me to press any key which was unresponsive. I restarted my computer while holding option and instead chose "efi boot." This brought me to the windows setup but the window was extremely small (also not sure if this has any relevance). I continued with the setup and was met with another problem when I had to choose the drive/partition. I chose drive 0 partition 4:Bootcamp but it didn't allow me to continue. I chose the "more details" option and it said that it needed to be formatted to ntfs. However, when i was back to the mac os after giving up, i checked disk utility and the drive was formatted with ntfs. So i'm sort of out of ideas, i've seen and read about other methods but, i case they are mentioned here, i dont have access to windows seven and i would like to avoid using other programs. I would appreciate if someone would let me know if there is a way to solve this problem and what that is, or let me know if there is no way so that i dont have to keep looking and just wait for apple to solve whatever issues botcamp has.
Thanks for any response
Also, i'm not sure if this matters but, when asked in bootcamp what size i wanted the windows driver to be, i chose the minimum (20 GB).

thanks, that was exactly what i was looking for, i just wanted to know whether or not i should bother trying to get it installed now or just wait. Do you, by any chance know around what time 8.1 will be supported? If not, thanks anyway, and youve been a big help. no more hours of confusion and searching for possible solutions.

Macbook Pro (Late 2008) - Windows 7 64-bit, Bootcamp 3.1 - Wireless Issue

Hi Everyone,
I have a Macbook Pro (15-inch, Late 2008) model with Snow Leopard and Windows 7 64-bit dual boot. I have done a search and cannot find any reference to this problem on my hardware.
I have had no issues in Windows 7 when using Bootcamp v3.0. In the last week I have upgraded to Bootcamp v3.1. (completed twice, rolled back in between to prove that the issues was related to the Apple Update)
After I update to v3.1, I have issues with my wireless network. The network cannot resolve the name for any internet address. I can connect to wireless networks (tried multiple networks), all the DHCP settings seem to be retrieved correctly (Gateway, DNS etc) and I can ping local and machines outside my network without an issue provided I use the IP address. (Skype works - which uses direct IPs rather than names I have found over time)
As soon as I use a name for a destination for Web traffic, Mail, pinging (any application), my Macbook Pro cannot resolve the address and just bombs out.
If I connect to a wired network, the machine works perfectly and name resolution on that interface works. If I rollback (using Windows 7 rollback capability) to before the v3.1 Bootcamp is installed, the wireless networking also works perfectly.
I noticed this in the support area at apple:
http://support.apple.com/kb/TS3196
But this refers to wireless issues in Bootcamp drivers prior to v3.1 and on 13 inch Macbook. Wonder if this is a similar issue or related?
Anyone else seen this or point me in the direction of a fix?
Thanks,
Thommo

I'm looking into running Windows 7 64bit on the exact same MBP you have, so I'm curious as to whether or not you've found a solution yet outside of the forums.
Do you think it might be that the bootcamp 3.1 update is only for Windows 7 32bit and not for the 64bit version?

Windows 8.1 on bootcamp not hibernating

Similar Messages

Maybe you are looking for