Windows 8.1? or A.O.L. from 1995?

wirelessly connecting to the internet. it will not stay connected! nearly every time I want to use it, I have to run the "troubleshoot problems" to reset the connection to the modem. takes as long as connecting to the internet via A.O.L. (1995),
except no cool dial up sound. is there a fix? or can someone at least add the dial up sound effects....

Too few information to decide what to do. The best forum for your problem is
answers.microsoft.com
Rgds
Milos

Similar Messages

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone. The iPhone only accepts transfers from the original iTunes PC.

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone 4S. The iPhone will only accept music transfers from the original iTunes PC. I have come to understand that an iPhone can have only one "daddy" iTunes PC, but have not been able to find out how to change the "daddy". I have done a backup of the iPhone, and a "Restore to Original Settings". Then I restored the content using the new iTunes PC. My Apps and contacts, etc. are back on the iPhone, but it still won't accept music from the new iTunes PC.

What happens when you try to sync the iphone to the new computer?

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

Windows Easy Transfer can't transfer files from Windows Vista or Windows XP

I'm running a English Windows Vista Ultimate and just bought a
ENGLISH Windows 8.1. I've downloaded the WET for Windows vista and tried to complete the second portion of the transfer by specifying the saved .MIG file WET created. Then I got the error message: "Windows Easy Transfer can't transfer
files from Windows Vista or Windows XP".
The truth is, Microsoft was too busy integrating special effects to it's operating system and claimed it as fully polished instead of making sure built-in tools were worth using.
Another harsh reality is that THERE IS NO WAY TO TRANSFER a file from Windows Vista to Windows 8. That's because engineers didn't even bother to make that possibility happen. Just Google: "Transfer from windows vista to windows 8" and you'll see
there are no relevant Microsoft web page about this.
Worse, Microsoft is giving excuses. To solve this issues, they came with a toolbox of fake scenarios in order to confuse clients even further, while they know damn well the Windows Easy Transfer is NOT EASY and certainly in multiple cases
DOES NOT TRANSFER jack to begin with.

I somewhat agree with you.
Trying to transfer from 7 to 8.1 and although it looks like the "7" side of the equation is working, the "8" side isn't.
"7" is trying to connect to "8" but "8.1" is being just plain stupid.
Not even sure why the MIG file step is even necessary if all I want to do is transfer one file between two machines. Said file is really BIG, or i'd just use my network, and the "8.1" rig doesn't have a dvd reader...
Per the MIG step... my file again, is big... I'd need to "mig" this file just to send it? Can't even get to the step where I'd mig-it and if i did, how long would that take?
So this is what progress is all about... geez... gimmie a NULL MODEM CABLE !!!

I have Photoshop CS5, and use windows XP. I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years. When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but the problem remains. Looking for help. Dan

Thanks for your response, I was able to open bridge from File-Browse in Bridge. This worked, but was not able to go back to the way I always opened Bridge. At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu. The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal. This time it did not go back to normal after several attempts. I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens. And yes I am using Mini Bridge in photoshop CS5. Thank you for your help. Dan

In Yosemite, pasted objects in Photoshop Elements 12 automatically snap to the center of a new window. How do I stop this from happening?

I installed Yosemite yesterday. Now, when I paste an image into a new window to combine it with another image, the layer or layers automatically snap back to the center of the new window. How do I stop this from happening?

Thanks, Barbara. I don't use a trackpad on my iMac, just a mouse. However, I DID discover yesterday that if I press COMMAND-T (the command to Free Transform an image) I can then move the image where I want in the window. I need to use the command every time I move the image, which is annoying--in Mavericks, that Free Transform command was somehow the default.

Getting windows error during running the sql scripts from form 6i

I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.

I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
     output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
          Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
     Get_Connect_Info(un,pw,cn);
     /* for Plan_table Begg. Second INNER BLOCK */
     declare
          dummy2 varchar2(40);
     begin
     select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
     if dummy2 = 'PLAN_TABLE' then
     output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
     end if;
     exception
     when no_data_found     then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
     end; --

All my documents were stored on my icloud drive in windows PC somehow the documents got deleted from my ios device. Kindly let know if there is a way to retrive my data

All my documents were stored on my icloud drive in
windows PC somehow the documents got deleted from my ios device. Kindly let
know if there is a way to retrive my data

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

My touchpad doesn't work on windows system after I upgrade the OS from window 8.0 to 8.1, can someone help me how to settle it, thanks,

Hi candy, glad that you found that Shockwave Flash Object, it works with the Flash files and is very important
The NPSWF files that you said are not there, those are for the Firefox browser or Chrome or some other browser. If you use Firefox and want the Flash Player for that, then close all of your browsers so you are only looking at your Desktop.
Click on this Flash Player Installer for Firefox and SAVE it to your Desktop. Then RUN it from your Desktop, and after it is finished Installing, Restart your computer.
Then Using Firefox go to the plug-ins and find a SWF vs 10.0.45.2 and make sure it is Enabled. This is just like the Shockwave Flash Object for Internet Explorer, but it is the one that works with Firefox.
Let me know if that is what you wanted to do. If you don't use Firefox, but Chrome or another browser, then this will work for that one also.
If you don't use another browser, then don't do any of this. I just thot maybe you did and that is why you were concerned that the NPSWF files were not there.
Thanks,
eidnolb

Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

Hi All,
I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
Thank you!
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Hi Andreas,
Thanks for the reply.
The link you put up, takes me to the page, but
"The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
That was WaterFox.
The webpage cannot be found
This in Internet Explorer 11.0
The Files in question were Recorded by Beyond TV to my Local Hard Drive.
When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
When I use Windows Media Player, nothing can be heard from the Rear Speakers.
Speakers and Hardware are working fine.
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
Test media player at www.vdat.com/techsupport/windowstest.asp

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order

By default the photos will be sorted by the date modified.
iOS: Understanding photo sorting
Edit (touch) them in the order you want them to be shown.

TS1389 I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the p

I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the problem.

Honestly, all the people in all the world that look at this forum, no-one can tell me why my itunes is causing my machine to fall over?
I wiped the machine and started again. Fresh XP install, fresh iTune download, fired it up imported one album and bang. Over it went. I've PC Checked the hard ware, mad onioned the system to see if it's a resource thing but it's rock solid until i open iTunes. Then after every re-boot, the message is back in the event log.
This:
Source iPod Service Event ID 0
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Can someone at least reply to let me know I've not typed this in dutch!! :o)
Cheers
David

What if I chose the 250Gb memory for windows but I want to take away from Makos 50 Gb but I do not want reboot windows

What if I chose the 250Gb memory for windows but I want to take away from Makos 50 Gb but I do not want reboot windows

If I understand you correctly, you are asking how to resize your partitions for MacOS and Windows (Boot Camp) you don't want to reboot the computer to do it. If that is correct, then I don't know of any way for you to do what you want. In order to resize the partitions, you will need to reboot the OS that is running from the partitions, preferably exit the OS, resize the partitions, then restart the OS, so it has a clean view of the disk.

Cannot verify server window is open and I am locked from using IPad

cannot verify server window is open and I am locked from using IPad

When you say that you rebooted, do you mean like this? Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If thats what you did and it failed, it couldn't hurt to reset your router as well by unplugging it from power for about 30 seconds.
You can also try Resetting All Settings. Settings>General>Reset>Reset All Settings. That will require you to join the network again and that might trigger the connection again. No data is lost when resting all settings but as the name implies, all device settings will be restored to factory defaults and you will have to enter your preferred settings again.

Windows 8.1? or A.O.L. from 1995?

Similar Messages

Maybe you are looking for