Windows 8.1 Pro Crashes When Enabling Hyper-V

So I bought a new HP Envy Desktop specifically for Windows Phone Development and ironically I can't get Hyper-V running. The machine just hangs on startup and eventually Windows 8.1 Pro x64 just crashes after multiple attempts after enabling Hyper-V in Windows
Programs/Features. It's a Intel i5 with 12GB of RAM and virtualization is enabled in the BIOS. I've read through multiple threads over the last several days and tried the following:
- Updating all local drivers and Windows updates
- Disabling Bluetooth
- Uninstalling Avira AV
- Someone also suggested disabling USB 3.0 support but I don't see an option to do this in my BIOS.
I've wasted a lot of time on this and I would really appreciate any help.
Thanks

Hi ericvanburen,
I found similar issue with HP Envy Desktop in HP forum , it might be due to blue tooth driver .
And I quoted the genneral solution here :
1. Enter into BIOS setup and set Virtualization as disabled and reboot system.
2. After booting windows 8, enter into Control panel and remove bluetooth driver.
3. Download and install Ralink Bluetooth driver version 9.2.101.10 (SP59632)
4. Reboot system and enable Virtualization Technology again.
For details please refer to following link:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-M6-1106er-Windows-8-Pro-hangs-up-to-start-after/m-p/2386453#M126362
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Final Cut pro crashes when any effect is click in the effect window HELP!!!

Final Cut pro crashes when any effect is click in the effect window HELP!!!
I have video placed in a sequence and when I go to the effect browser to click on a effect to drop on it the program thinks for a few seconds and then quits. I tried dumping the pref files in the pref folder and it did not work. is there a different method I should try?

#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://www.fcprescue.com and run it.
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Premiere Pro crashes when i start it up. Help please :-)

Premiere Pro crashes when i start it up. Help please :-)

Go to Adobe Premiere Pro CC error on start and answer all the questions I posted in reply #1

Acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date

acrobat x pro crashes when I try to flatten a pdf after using typewriter to insert a date.
Has anybody else seen this problem? Is there a fix?
I wanted to download the demo of acrobat XI but it says the previous version will be removed and deactivate the license. That sucks!

Yes it is up to date.
I can use the stamp tool and flatten it after with no problems, but the typewriter tool crashes it upon attempting to flatten.

X pro crashes when multiple documents are opened

x pro crashes when multiple documents are opened

Hi travisc74509405,
Could you please let me know what version of OS are you using.
Also, let me know how much RAM and free hard disk space is available on your machine.
What exact dot version of Acrobat X do you have? You might check for updates under the Help menu to use the latest patch i.e. 10.1.13
Hope to hear from you.
Regards,
~Anubha

ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

Hi shan_mcarthur,
Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
Do let me know.
Regards

Adobe flash cs5 pro crashes when launched.

Adobe flash cs5 pro crashes when launched. The name of the problem is named 'Appcrash.' The application name is 'flash exe'. Application version 11.0.0.485. Name of the module with this faults is Adobepsl.dll. and the So version?: 6.0.6002.2.2.0.768.2
When I start Flash cs5 there appears a small box which tells me that it is importing files, where I didn't ask for. This happened after I imported a video animation from Photoshop Cs3. But now I just want to start a new project which it doesn't allow. I get only the flash sign and the fonts and than during the building workspace, i get the errorreport. Anyone knows what to do? Because it is not only frustrating, now I can not work on my website projects which I have to finish soon, aaaahhhhhaaaaaahhhhhhhh.
Thanks for reading and hopefully someone knows something to help me out of this misery. Oh I reinstalled flash cs5 allready, but nothing changed!.......

Hello,
We need you to recreate preferences to help resolve this issue as Jose suggests. Follow this KB article and see if it helps you.
http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Regards,
Suhas Yogin

Macbook Pro crashes when running on battery

Hi.
My Macbook Pro crashes when running in battery. It seems it doesn't happen when connected to the power.
Is there any way to know if it's a battery malfunction?
Because Apple changed the motherboard a month ago or so because Nvidia broke. So it could be also the connector to the battery?
Is there any tests I can run?
Thanks

I would take it back to Apple and have them check it. You may have got a replacement logic board with a problem. Apple usually use rebuilt ones.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

MacBook Pro crashes when connecting via external modem

My new MacBook Pro crashes when I try to connect to the Internet via an external modem. Is it a SW or HW problem? In the latter case might it by the computer or the modem (original).
Sarah
MacBook Pro 1,1 Mac OS X (10.4.6)

This is Bob Simpson again from Paris. I followed the advice given in this forum and took out the set of HP printer drivers from the drivers pre-installled in my MacBook Pro and put them on my desktop. After that, the modem worked perfectly. If I want to use my HP Laserjet 1200 printer, I plug it into a USB port on the computer, the computer recognizes it and prints. If I want to use the modem again, I have to take that printer out of my list of printers in the print center. This is a bit of a pain in the neck, but it works. No one at any of the Apple distributers or Apple Care centers was able to figure all this out. Our forum did the job and we should get free awards from Apple, like the installation of the update on all our computers that will settle this problem. Otherwise, my BMacBook pro works like a dream. Many thanks to all of you and jackplug, you don't have to throw away your printer.

PSE 6 on Mac Book Pro Crashes when opening a picture

Whenever I try to open a picture PSE crashes. This is similar to another post but I should not be having RAM or generation issues. I have removed and downloaded from different DMGs all to no avail. Please advise.
Thanks

Thanks for the comment but I wasn't asking about viruses. The thread I asked on solved the other user's issue because of the Norton incompatibility. I was referring to the original question which had nothing to do with viruses. I open elements and try to open a picture from iphoto to work on and elements quits. Since I don't have Norton or any other anti virus program, I was hoping there was another explanation which would apply to my situation. Any ideas?
Date: Tue, 4 May 2010 16:34:51 -0600
From: [email protected]
To: [email protected]
Subject: PSE 6 on Mac Book Pro Crashes when opening a picture
There's really no need for Norton on the Mac - because there is no such thing as a Mac virus. I realize that this could change tomorrow, but as of today, there is no such thing as a Mac virus. There hasn't been for about a decade.
You can remove Norton. I removed it from my Macs about a decade ago.
To prevent any future viruses from getting in, set up a new sub-user account on your Mac, and start using it. Don't run your Mac as the Administrator.
When you run as a lowly user, your Mac keeps an eye over what you do, and demands the Administrator's name and password whenever you do something suspicious. That won't be a problem 99.9% of the time. It's only a problem when you try to install an application or a utility.
Keep that limitation in mind, and use it to your advantage. A virus is an application that pretends to be something else. It lures you into installing that virus onto your computer. Let's say in the future you download what you think is a photo. It's really a virus. You double-click on it to launch Photoshop Elements. Instead, you launch the virus, which starts to install itself on your Mac.
At that point, everything comes to a screeching halt when the Mac operating system stops the installation, and puts a message on the screen. That message will say something like, "Please type the Administrator's name and password to INSTALL THIS APPLICATION into the Applications Folder." That is your tipoff that you aren't dealing with a photo. You are dealing with an application.
At this point, you should ask yourself, "Why is a photo trying to install anything?" Whenever the Mac operating system asks for the Administrator's name and password, you should ask yourself if you know exactly what is being installed.
If you were running your Mac as the Administrator, then you wouldn't get this warning messages. The Mac would say, "Well, I guess he knows what he's doing, so I'll install this application." And the still-to-be-written virus would be installed on your Mac. It's a lot easier to keep viruses off your computer than to try to remove them once they get in.
This is why you don't need anti-virus software on the Mac - if you have an intelligent user operating the computer as a sub-user.
>

Premiere Pro crashes when I open my project because the cursor is stuck on a time-lapse sequence

I have a Time-lapse sequence which I have just built and saved the project of, but my cursor has stopped on the time-lapse sequence. Premiere Pro does crashes when I open my project because the cursor is stuck on the time-lapse sequence.
My project was saved in Premiere Pro with the cursor stuck on my new time-lapse sequence. Now, Premiere Pro crashes when I try to open the project....Please help URGENTLY?

>It may be a corrupt font, but I have thousands installed. Is there any way to test for that?
Reply #8 was specifically to address this question.
>I basically wanted to know if this is a 3.2.0 issue or not.
That's not what you asked. Perhaps asking a specific question will get you closer to a specific answer?
The titler does not crash for me at any stage of the Adobe updates for Premiere Pro, including 3.2.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Soundtrack pro crash when open

Soundtrack Pro crashes when I lunch it. The same Happens on my laptop, Powerbook G4 1.68 GHz 1.5 GB Ram 15". I have deleted all the related files and reinstalled and the same happens
Anyone who can help?
Process: Soundtrack Pro [363]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: ??? (???)
Build Info: SoundtrackProProject-7030000~2
Code Type: PPC (Native)
Parent Process: launchd [104]
Date/Time: 2008-07-08 23:20:04.278 +0200
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x000000008fe0105c
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/ProMetadataSupport.framework/Versions/A/ProMetadataSupport
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found

Hi. I'm having the same problem. I just did a complete wipe and reinstall of my MacBook Pro and installed a fresh copy of Logic Studio. I've been using Logic Pro quite happily for a week or so but tried to open Soundtrack Pro for the first time last night and it barely bounced once in the dock then it said that Soundtrack Pro quit unexpectedly. I tried a couple of times including resetting the application but still no joy. I then reinstalled Soundtrack Pro only from the Logic Studio installer DVD but it still isn't opening. Any ideas would be much appreciated. My whole machine is up to date via software update and I have also run Disk Utility and there are no problems. There is basically nothing on my machine at the moment either having done a complete reinstall. Are there any library files that could be deleted to fool it into opening fresh again? Plists etc perhaps? My error log brings up the same thing at the bottom saying that no image was found.
Will keep digging around the archives and see if I can come up with anything.

Acrobat 9.4.4 Pro Crashes When Attempting to Open PDF Form

OS: Win XP Pro SP3
The machine worked fine until Acrobat updated itself to 9.4.4 then the problem started. Crashes when attempting to open most PDF Forms - even when freshly rebooted or repaired. I originally thought it was related to a browser or Outlook 2007, but later found that it does it under all circumstances. It is my General Manager's machine having the problem, so I need to get this resolved ASAP. Your experience and assistance is much appreciated.
My temporary fix was to uninstall 9.4.4 - Install 9.0 and turn off automatic updates - worked beautifully. It would be nice to get to the bottom of this so we can update our CS4 products.
Another user reported this problem on May 16, 2011 and no one has replied to his post.
Thanks in advance.

Please repost in the Acrobat Windows forum.
http://forums.adobe.com/community/acrobat/acrobat_windows

Acrobat X Pro crashes when I try to scan

I recently upgraded my computer to Windows 7 (32-bit). I used to have Acrobat Pro 6 when I was running WinXP, but I knew that wouldn't be compatable with Win7, so I went out and got Acrobat X Pro.
My scanner is part of my multifunction device: Samsung SCX-4720F
Acrobat X Pro installed fine, as did my scanner driver. When I attempt to Create a PDF from my scanner, Acrobat X crashes every time.
I've searched the web for the problem, and have seen posts by lots of other people who have the same or similar problem with Acrobe Pro 9 using Samsung scanners, but I found no solution. Haven't seen any posts about it for Acrobat X Pro yet, but I know it hasn't been out all that long.
My scanner works fine. I have used it with Omnipage Pro 17 with no problems.
Anyone have any ideas?

Hi
          The crash seems to be happening because of DEP (Data execution prevention) on Win 7. The issue happens when Acrobat tries to communicate with scanner drivers which are not DEP compliant. It seems Samsung driver is not DEP compliant. To verify the same you can turn OFF DEP on Win 7, although it is not recommended.
To turn off DEP follow the steps mentioned below:
-          In the Start Menu, navigate to All Programs, thenAccessories.
-          In the Accessories menu, right click on “Command Prompt” and select “Run as administrator.“
-          You may need to provide Administrator credentials at this point.
-          In the Command Prompt window, type “bcdedit.exe /set {current} nx AlwaysOff” and press Enter.
-          You should see “The operation completed successfully.“
-          Close the Command Prompt.
-          You must then reboot your computer.
Turning DEP is not recommended, so please raise this issue with Samsung also. Let us know if these steps help.
-Ravish

HP OJ Pro 8600 Pro crashes when trying to login to print Google Calendar

I get a hard reboot crash when I try to login with the correct password using the Google Calendar App. If I use the incorrect password it handles that gracefully.
HP OfficeJet Pro 8600 Pro, brand new out of box
I have not hooked the printer up to the computer as of yet. But I utilize Windows 7 64 bit.

I will need to get some more information from you first in order to help out. This printer is set up wirelessly, Correct? What make and model is the router that are you using? Or, is this a hot spot setup? Are you able to access other Apps on the front panel successfully? Can you access HP apps successfully? Have you received any error messages on the front panel of the printer?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Windows 8.1 Pro Crashes When Enabling Hyper-V

Similar Messages

Maybe you are looking for