Windows 8.1 Pro OS Deployment Using SCCM 2007 SP2 R3 - Possible? Supported?

I have been able to successfully capture and deploy a Windows 8.1 Pro image to a desktop, however the Apply Device Drivers action consistently fails with the following error in the smsts.log:
Driver-signing policy cannot be configured on this operating system
After that point no suitable drivers are able to be found and the task sequence is unable to proceed due to the lack of drivers. I'm using the same task sequence I used for Windows 8 OS deployment within SCCM 2007 SP2 R3. I'm just looking for confirmation
on whether or not driver deployment is now broken in Windows 8.1.

The toolset has been updated significantly to support Win 8.1. Exact technical details of the changes aren't published anywhere beyond the fact that it simply isn't supported. It's insufficient simply because it is known not to work -- beyond that,
does it really matter?
Note that even Win8 deployment within ConfigMgr is unsupported so basically you're off into uncharted territory and assuming a lot of risk in doing so.
Jason | http://blog.configmgrftw.com

Similar Messages

Windows 7 deployment using SCCM 2007 SP2

Hi,
We planning to do Windows 7 deployment using SCCM 2007 SP2 so we have some queries regarding same.
Is it possible to take entire HDD backup & restore using SCCM 2007 SP2? Also is it recommended to do so?
What will be the effective method to deploy OS at remote branches?
If we want to save the network bandwidth then what will way to send image to distribution point and client as well.
Is it mandatory to have PXE boot enable in bios & set as first boot preference on each client machine for PXE initiated windows 7 deployment? If so then is there any option to enable PXE boot & set as first preference on client machine
remotely?
Is it possible to deploy OS in other than C drive i.e D or E to have dual boot option?
Which we will be best method to have zero touch deployment without any end user intervention and why?
Please help to clarify.

As Jason said, these are the configurations that requires some high level skills to configure it, the answers are the same as said by Arnav... below links would give you a good heads up for the OSD in SCCM if you still want to try it on your own...
http://download.microsoft.com/download/7/C/9/7C9A54AC-9661-48CA-9A7C-E3D2B5B23CF2/SystemCenterConfigurationManager2007OperatingSystemDeploymentGuide.pdf
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
https://blogs.technet.com/b/birojitn/archive/2010/01/20/windows-7-deployment-using-sccm-2007-sp2.aspx
bluerail

Migrate Windows XP to Windows 7 in secondary site using sccm 2007

Hi all,
I have migrated Windows XP to Windows 7 using SCCM 2007 R3 SP2 in the primary site and a DHCP server is available. Now I need to do the same exercise to an XP machine in a secondary site but there is no DHCP server, all machines are configured with static
IPs. Do I need to install temporary DHCP server there or I have other options?

As mentioned, to my knowledge, there's nothing built in to handle this. You can try using the capture tasks as I mentioned but I don't think that they will preserve the IP all the way into the deployed Windows instance. For this, you will have to build
some type of custom solution.A quick search of the web should turn up results:
http://www.bing.com/search?q=osd+without+dhcp&src=IE-TopResult&FORM=IETR02&conversationid=
Jason | http://blog.configmgrftw.com | @jasonsandys

Can I use SCCM 2007 to deploy SCCM 2012 Agent

I was reading the scenarios for deploying the SCCM 2012 agent here
http://technet.microsoft.com/en-us/library/gg682132.aspx
I have been planning to deploy the 2012 agent using an SCCM 2007 deployment package. I am not migrating any data/packages/collections/anything from SCCM 2007.
I am looking for a sane way to deploy 2000ish clients a day for 2 weeks and be done.
I figure they are all SCCM 2007 clients so lets deploy 2012 agent using SCCM 2007.
I read the following in the link above and it sounds like the way I want to go – use SCCM 2007 software distribution…
Upgrade installation by using application management
Upgrades clients to a newer version by using Configuration Manager application management. You can also use Configuration Manager 2007 software
distribution to upgrade clients to System Center 2012 Configuration Manager.
Then later in the same document there is this…
How to Upgrade Configuration Manager Clients by Using a Package and Program
You can use Configuration Manager to create and deploy a package and program that upgrades the client software for selected computers in your hierarchy. A package definition file
is supplied with Configuration Manager that populates the package properties with typically used values. You can customize the behavior of the client installation by specifying additional command line properties.
You cannot upgrade Configuration Manager 2007 clients to System Center 2012 Configuration Manager by using this method.
In this scenario, use automatic client upgrade, which automatically creates and deploys a package that contains the latest version of the client.
What???!?? There is no Automatic client upgrade feature in 2007 – so how does that even make sense? In one section, it says I can deploy the 2012 Agent using SCCM 2007 software distribution, and then later in the same document, it
says I can't. I am probably misunderstanding somthing.
Is it possible to make a package/program in SCCM 2007 that will make targeted clients upgrade to Agent 2012 and join the new SCCM 2012 Site?

I tested this (deploying 2012 agent using existing 2007 SCCM infrastructure) with a few test systems at my desk and it seems to work pretty smoothly. I made a package to deploy SCCM 2012 SP1 and added it to my SCCM 2007 Site. Then I deployed
the 2012 agent from 2007 and it worked great. If it works this well in production, I will be able to migrate all of my clients in less than a weeks time.
I have not published the 2012 site information in AD - and I don't plan to. We would have some overlapping site boundaries - and in 2012 it seems its unnecessary in a single site hierarchy. I AM planning to use boundaries to assign
DPs, but thankfully site and DP boundaries have been separated. It works great to just specify the site in everything and not worry about auto discovery. My clients don't move among sites since I only have one large site.
Sorry that I somehow posted this same question twice, and thanks for cleaning that up.
In my installation, I just called ccmsetup.exe with the following command line...
/mp:myMP.mydomain.com CCMLOGMAXHISTORY=5 CCMLOGMAXSIZE=1000000 SMSCACHEFLAGS=PERCENTDISKSPACE;NTFSONLY SMSCACHESIZE=10 SMSMP=myMP.mydomain.com SMSSITECODE=CCM
I am not sure that I need to specify the MP twice, but it is working to do so. I'm also not sure whether the log and cache flags will be honored since there are existing settings from SCCM2007 agent. I think that the 2012 install will not change
these settings upon installation, but it does not appear to hurt the process to include them just in case it does work.

Deploy Java and Oracle updates using SCCM 2007 Software Updates

Hi Team,
I am using SCCM 2007 to deploy software updates on all my servers. Now i want deploy updates fro third party tools like Adobe, Java etc..Please suggest me on how to deploy these updates using SCCM.
I am looking for other simple solution than SCUP 2011. Please suggest.
Thanks
Siva

Hi,
SCUP 2011 would be the way to do it or a package/program. There are commercial software solutions that plugins to configuration Manager like Secunia
http://secunia.com/vulnerability_scanning/corporate/sc2012_plugin/ ,Solarwinds
http://www.solarwinds.com/patch-manager.aspx and Shavlik
http://www.shavlik.com/products/scupdates/ that offer a subscription of updates for these products for a cost of course.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Windows 8.1 Pro OEM ISO and Paper License it's possible to active?

My client have Windows 8.1 Pro OEM iso and paper license it's possible to active license.
Md. Ramin Hossain

Hi,
I think that this is possible, after installing you can try to change key in PC Settings or in case when this will be not possible you can use slmgr.vbs.
To change product key: slmgr /ipk xxxx-xxxx-xxxx-xxxx-xxxx
To activate slmgr /ato
More: http://technet.microsoft.com/en-us/library/dn502540.aspx
Br,
Heiki

Uninstalling programs using sccm 2007 sp3

Hi there,
We have imaged 300 desktops which have office 2007 preinstalled. What we want to do is uninstall office using sccm 2007....my questions is that is this path possible?? Big question is can we uninstall a program that has not been deployed with
SCCM???

Hi,
this is an example for MS Visio 2007 Professional but it is valid for all apps like Visio, Project, Office (2007 and 2010 Versions). The only difference is in the <Configuration Product="APPLICATION ID">
line
<Configuration Product="VisPro">
<Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />
<Setting Id="SETUP_REBOOT" Value="Never" />
</Configuration>
This line in SilentUninstallConfig.xml file stops the client from restarting after an uninstall procedure.

Query to list computers with a specific network printer using sccm 2007

Hi to all,
I really need help to create a report taht lists all the computers which have a network printer "MAXXX" installed.I would like to do it using sccm 2007.
Thank you in advance for your help.
Regards,
Stephane.

CM07 does not collect this information, Printers are a user setting and therefore you will need to create a script to inventory the printer for each user then you can have CM07 collect & report on them.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCm 2007 sp2

I'm having a problem when installing sccm 2007 sp2 when I try to download updates in order to slow the Internet that you. please show me the file contains all the ingredients needed in step 89 updated prerequisite component path so that I could install
the file below to use the Internet

Hi,
You can download the pre-reqs from another computer, this post describes how it is done:
http://www.adrianstoian.com/?p=48
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2007 SP2 R3 client on App V Server with Terminal Server

Hii,
We have the following servers in our environment.
Termincal Services with Server 2008 and App v on same machine
SCCM 2007 SP2 R3. When I installed SCCM client on APP V server yesterday, terminal and App V servers / services stopped working and users were unable to use these services. After uninstalling of SCCM client, its working. What is the recommendation for this
situation? Is it recommended to do not install SCCM client on APP V servers? And if we install SCCM client then APP V services stop working?
Please suggest.
Regards, Syed Fahad Ali

issue has been resolved via below link.
http://support.microsoft.com/kb/2694295/en-us
the client advertise setting was set to Allow virtual application package advertisement. For the
time being we uninstall the SCCM client from all APP V servers. Soon we will test with the mentioned setting in above link.
Thanks for your response.
Regards, Syed Fahad Ali

Are new versions of SP for SQL supported for SCCM 2007 while in extended support

With SCCM 2007 R3 in extended support, are new service pack versions for SQL, such as 2008 SP3, tested and supported? We see TechNet is not updated with this version. We have tested in lab works great, but wanted to verify supportability
before upgrading production.

Configuration Manager 2007 supports Microsoft SQL Server 2008 R2 SP1 and Microsoft SQL Server 2008 SP3.
System Center Configuration Manager 2007 SP2, R2 and R3 now supports Microsoft SQL Server 2008 R2 SP1 and Microsoft SQL Server 2008 SP3 as a Configuration Manager 2007 site database.
Also you can refer below link
http://blogs.technet.com/b/configmgrteam/archive/2011/09/08/configuration-manager-support-announcements-for-august-2011.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Windows 7 Deployment using SCCM 2012

I am installing Windows 7 Enterprise 64bit on HP Desktops and Laptops using SCCM 2012 task sequence. I captured an image from the reference computer using capture media. The image works fine on Hp Desktops but when I install the same image on HP laptops,
I get an error message right at the end "Windows Setup could not configure Windows to run on this computer's hardware". I captured another image with plain Windows 7 Enterprise without SP1, updates and drivers. it works perfectly fine on all desktops
and laptops both. Below is the setupact and setuperr error logs. Much appreciated.
SETUPACT.LOG
capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "d01b5e9b-0af5-4b3c-a712-70977e79a177"
2014-08-26 21:19:04, Info capisp.dll::SamConnect failed: c00000dc
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: DisableAdministratorIfApplicable failed
2014-08-26 21:19:04, Info capisp.dll::CryptoSysPrep_Specialize: returning 65b
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Info IBS Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
2014-08-26 21:19:04, Info IBS Callback_Specialize: Specialize return: [1627]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b
2014-08-26 21:19:04, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not configure Windows to run on this computer's hardware.]
SETUPERR.LOG
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service usbhub20.
2014-08-26 21:16:24, Error SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-08-26 21:19:04, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2014-08-26 21:19:04, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

Hi,
From your error log, we could see the root is the incorrect driver.
How did you get the driver in your first image? If you enable "PersistAllDeviceInstalls" configuration when you capture the image, all Plug and Play devices in reference computer are uninstalled during the generalize pass and then reinstalled
during the specialize pass.
However, it‘s not always applied to your laptop.
Thus I suggest you download the proper driver or change the BIOS hard disk drive setting to IDE to check the result.
Warning: This procedure may involve changing your hard disk drive settings in the BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems that result from changes to the
BIOS can be resolved. Change the BIOS settings at your own risk. Incorrect or corrupted BIOS settings can cause startup problems or shutdown problems.
In addition, you could refer to the article below:
“Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
http://support.microsoft.com/kb/2466753/en-us
Karen Hu
TechNet Community Support

Want to use SCCM 2007 to image thinkpad 10 with windows 7

Hello,
can someone tell me if
SCCM 2007 can be used to build the thinkpad 10 tablet and if it can
can I deploy a windows 7 x64 image to it and it I can
where are the drivers as I can only find windows 8 drivers.
I have build a Helix successfully in the past with windows 7 but I cannot get the thinkpad to work, what am I missing?????
thanks
Nazir

Perhaps this page from Microsoft will help understand which versions of SCCM can deploy which versions of OS:
http://support.microsoft.com/kb/2909893/en-us
As for the ThinkPad 10, I believe it only supports Windows 8.1 so there will be no Windows 7 SCCM driver pack for it.

Zero touch deployment using SCCM

Hi,
As SCCM is called as zero touch deployment method for operating system deployment. So please help me to clear my below doubts –
How SCCM take care of backup & restore of entire HDD, if SCCM does not take care of backup & restore of entire HDD then how we can say it is zero touch deployment method?

we can use USMT tool with SCCM to decide what we need to backup. I think good planned infrastructure will always have users data on file servers rather than on user's local system. please refer below few URLs for more information:
http://technet.microsoft.com/en-us/magazine/jj127984.aspx
http://technet.microsoft.com/en-us/library/dd560793(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh397289.aspx
http://blogs.technet.com/b/meacoex/archive/2013/02/19/migrate-windows-xp-to-windows-7-using-sccm-2012.aspx
Prashant Patil

Unable to remote control 'Windows 8' applications running as administrator using OCS 2007 R2

Hi,
While we are doing desktop sharing of a windows 8 system using OCS 2007, we are unable to control a few applications such as CMD Prompt - run as administrator, Device manager, Registry, etc.. even though the UAC setting is 'Never
notify'. Whereas, we are able to control all other applications without any issue. Is this a known issue?
Thanks,
CMR

Hi,
Yes, it is a known issue. Here are other threads for your reference:
http://social.technet.microsoft.com/Forums/lync/en-US/3765a320-c07c-41fe-85e0-1b41750c7218/lync-sharing-desktop-uac-promt-problem?forum=ocsclients
http://social.technet.microsoft.com/Forums/lync/en-US/ef3b0192-9802-42f7-9105-29c62caa5ffd/performing-administrative-tasks-in-a-lync-shared-desktop-session?forum=ocssecurity
http://terenceluk.blogspot.in/2011/03/lync-server-2010-desktop-share-issue.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Windows 8.1 Pro OS Deployment Using SCCM 2007 SP2 R3 - Possible? Supported?

Similar Messages

Maybe you are looking for