Windows 8.1 Remote Desktop Connection dies with feeble "An internal error has occurred" with SonicWALL VPN
Back when life was simple, under Windows XP, i simply fired up my SonicWALL client, connected to the host, and then connected via RDC and all was good.
Now I have Windows 8.1 and SonicWALL's v4.9.0.1202 64-bit client. I can connect with the client - although it seems to drop the connection quite a bit - but when it is up, I can ping the host. But when I try to RDC, I get the completely unhelpful
error mentioned above.
My version of 8.1 is up-to-date - the VPN client came right from DELL's website. What am I doing wrong?
Just in case you want to know, yes - I can RDC to non VPN and PPTP VPN sites no problem - and on the same LAN, my XP box can RDC with SonicWALL with no issues.
Please, somebody - i need to get back to Planet 10!
Did you ever find a solution to this problem. I am having the exact same problem
Similar Messages
-
Remote desktop connection. An internal error has occurred.
Hello,
The error occurs from a Windows 7 Home computer to a Windows 7 Professional computer.
I connect successfully through a Sonic Wall VPN client.
I can ping the IP address of the remote computer.
I run remote desktop (using IP address of the remote computer) and get error:
"Remote desktop connection. An internal error has occurred."
It used to work flawlessly and all of a sudden quit working.
Please advise.It was a VPN configuration issue on the Sonic Wall.
What was the VPN configuration issue on the Sonicwall? -
"An internal error has occurred" message when scanning from MX922 to desktop using Windows 7
I am no longer able to scan using my MX922 connected to my desktop running Windows 7 without getting a message on my desktop saying "An internal error has occurred". I have turned the MX922 on and off, I have disconnected both the power cord and USB cable from the MX922 and from my desktop, I have reconnected the USB cable to a different port on my desktop, I have uninstalled all Canon programs from my desktop and reloaded all Canon programs with the MX922 CD, and I have restarted the desktop multiple times. I scan documents several times a week for my business. It has worked fine until today. What do I need to do to correct this problem and get back to scanning?
Hi boisseaujm,
If you temporarily disable any antivirus or firewall software that is on your computer, then attempt to scan again, are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
When i try to connect my iphone to itunes it comes up with a message saying "itunes could not connect to this iphone, an unknown error has occured (0xE8000012)
i have recently bought new laptop and downloaded/installed the newest itunes and this has happened.. any ideas?read
Error -50
Delete Storm Video, QuickTime, iTunes, then reinstall iTunes. See also KB TS1583for error -50 -
Itunes cannot connect to this iphone an unknown error has occured. Please help.
Hi,
I have just got an iphone 5c. However i'm having trouble with my itunes on my laptop.
I'm getting 2 error messages:
Error message 1 is ( an unknown error occured 42032 ) this happens every time i open itunes.
Error message 2 is ( itunes cannot connect to this iphone, an unknown error has occured ) this happens every time i try to connect my new phone.
I am running the latest itunes version on windows 7.
So far i've tried uninstalling all components and reinstalling them to no avail.
I've spent 3 hours today on the phone to both Apple and Microsoft with both blaming each other.
Please someone help.
Kind regards
DaleHi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB -
Internal Error has occurred . Check the log file for details 11g r2 on windows 8 64bit
Hi Friends,
I Have just installed on my laptop
Database : oracle 11g 64bit , on windows 8 64bit
I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
But when I tried to connect through EM by sys credentials...
https//localhost:1521/em
I am getting Error Internal Error has occurred . Check the log file for details....
When I checked the emoms.trc this the last few lines...
https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
Thanks and RegardsYou could try reading what I said: change the port in the URL to 1158.
My release of windows is this,
c:\Users\John>ver
Microsoft Windows [Version 6.2.9200]
c:\Users\John>
You can ignore that junk about editions.
And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings. -
Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.
Jeannine,
If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
Location of LR Preset folder in Windows Vista/ Windows 7
C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
Hope this helps a bit,
Glenn -
what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either
- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Another Windows 8.1 Remote Desktop Connection Issue
I want to connect to my PC running Windows 8.1 from my tablet running 8.1. I have allowed RDC in the windows firewall. I open RDC on my tablet and enter my PC computer name, KENSPC, into the Computer field and get "Remote Desktop can't connect to the
remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network.
I get the same message when I use the IP address for the PC.
My PC is wired to my router and my tablet is wireless and both use my Microsoft account for credentials. I can ping the PC from the tablet, so I know the tablet can see the PC and I can open files on the PC from the tablet. I have "Allow
Remote Assistance connections to this computer" turned on. And I have, in fact, had HP help via remote assistance. But nothing I do seems to work. The steps as specified in the Helps do not work. Any help would be appreciated.
kenfrantz at outlook dot comHi,
According to your description,we need to know the detail edition of your remote PC.
You can use a PC running any edition of Windows XP, Windows Vista, and Windows 7, or a PC running Windows 8, Windows RT, Windows 8.1, or Windows RT 8.1 to initiate a connection.
But the remote PC must be running one of these Windows operating systems:
Windows 8.1 Pro ,Windows 8.1 Enterprise ,Windows 8 Enterprise ,Windows 8 Pro ,Windows 7 Professional ,Windows 7 Enterprise ,Windows 7 Ultimate ,Windows Vista Business ,Windows Vista Ultimate ,Windows Vista Enterprise ,Windows XP Professional.
Also, I would like to share the following article with you:
http://windows.microsoft.com/en-us/windows/remote-desktop-connection-faq#1TC=windows-8
http://www.microsoft.com/en-us/windows/enterprise/products-and-technologies/windows-8-1/compare/default.aspx
Hope this helps.
Regards,
Kelvin Xu
TechNet Community Support -
Connecting to a Windows computer using Remote desktop connection
I have connected a Windows 7 computer to my network using an ethernet cable to my Time Machine which is configured as an extension to my Airport network. My Mac sees the computer as shared, and I can connect to it using the name and password so I can browse files on it etc.
Nevertheless Microsoft Remote Desktop Connection will not connect to it, saying there is a network error. It has been suggested that if I use its IP address rather than its name it may work, but how do I remotely find out what its IP address is on the Airport network? I have not found the way using Airport utility or help.
thanks in advance...You are using the Mac version of RDC aren't you?
If so, please post questions regarding it on Microsoft's own forums for the Mac version of RDC, as Apple discussions only provide support for Apple products -
UAG SP4 and Windows 8.1 Remote Desktop Connection 8.1
Hello,
I found on the description of SP4 for UAG the following: "Remote Desktop: Forefront UAG SP4 supports the Remote Desktop Connection (RDC) 8.1 client." Does that apply to the publication of servers using "TS Client Tunneling
(Windows Vista/Windows XP)"?
When I use my Windows 8.1 32bit client to connect to the portal, I can see the published application, click on the icon that is on the portal and it start the SSL Application Tunneling and the SSL icon appears at the Taskbar. Then it opens the "Remote
Desktop Connection" client. However when I type the name or IP of the machine to what I want to connect, it fails. Is something wrong? Or this is not working on Windows 8.1? My windows 7 cliesnt have no problem to connect using this application.
Thank you!Hi Rob,
Let's confirm some situation:
Did you mean connect to Windows 7 from Windows 8.1 computer?
Did you mean the printer connect to another Windows 8 computer at home, and shared to that Windows 8.1 or the printer connect to that Windows 8.1 directly?
Firstly double check your settings:
1. Launch Remote Desktop Connection.
2. Click Options, and then click the Local Resources
tab.
3. Under Local devices and resources, select the Printers check box.
After that make sure that the proper printer driver version is installed on the remote computer.
Meanwhile, refer to this thread to check the port:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/win-7-remote-desktop-and-local-printing-not/544acb1b-a259-4170-bc05-2c6dbfd0ca05
Karen Hu
TechNet Community Support -
Hi, I updated to 10.5 iTunes. I have a PC running Win 7. I have an iPhone 4.
After updating to the new iOS5, and the attendant iTunes update, now iTunes crashes - a lot - and then won't exit when I click the X. I have to force quit it. Then, it restarts itself a couple minutes later! WITHOUT me plugging in my iPhone! Plus it states it "could not connect to the iPhone because an unknown error has occurred."
This is a brand new fresh install of Win 7 - literally 4 days old; nothing fancy on it.
Anybody else having this problem? I've googled this for a while and can't seem to find any answers. It's getting really annoying!!
Thanks,
MikeFollow the steps here:
http://support.apple.com/kb/TS3221 -
Subject host OS: windows 8 pro.
I've turned os feater hyper-v on, restarted copmuter. In hyper-v manager added empty virtual machine. After double clikcing on my newly created machine windows with "virtual michine connection appeered". I turned button "power on" and
console has dropped error:
"remote desktop connection": "An authentication error has occurred. The supplied handle is invalid."
on the tiny image on the left bottom picture a can see quest console.
1) How can i install OS on my guest, where is default console for virtual machine?
2) What is RDP required
for on this firts stage of installation and how can i connect to the virtual machine console without it???Hi,
Regarding your first question, here is an article talking about install and configure the first virtual machine in Hyper-V, please refer to Step 2: Create a virtual machine and Step 3: Install the guest operating system in the below link:
Install Hyper-V and Configure a Virtual Machine
By saying the default console for Virtual machine, do you mean the Hyper-V manager?
The error might indicate that there is no VM available to connect. After we installed a OS, then we could connect it with the right-click in Hyper-V manager， see:
Connect to a Virtual Machine
The RDP connections is used to connect the VM in Windows 8, and for Windows 8.1, there are great improvements including what's called Enhanced Session Mode, more information, please see:
Overview: Client Hyper-V Enhanced Session Mode in Windows 8.1
If I misunderstand something, please let me know.
Best regards
Michael Shao
TechNet Community Support -
Connect to mysql DB (An unidentified error has occurred.) plz need help...
I have been unable to create a database connection in dreamweaver to my MySql
server. Each time I receive the message "an unidentified error has occurred".
I can use pure php code to create a connection successfully:
<?php
$username = "root";
$password = "password";
$hostname = "localhost";
$dbh = mysql_connect($hostname, $username, $password)
or die("Unable to connect to mysql");
print "connected to mysql<br>";
$selected = mysql_select_db("test",$dbh)
or die("Could not select first_test");
if (mysql_query("insert into test_table values('5')")) {
print "successfully inserted record";
else {
print "Failed to insert record";
mysql_close($dbh);
?>
This works, I can successfully insert a record. However, if I try and create
a connection in Dreamweaver with these same variables, I receive the message
"an unidentified error has occurred". I have tried, deleting the _mm
connection scripts folder and recreating them. I have used the mx2004 updater,
I have tried all document types... nothing seems to work...
i am using local server (phptraid)
PHPTriad 2.2 contains the following changes:
Updated packages for Apache(1.3.23), MySQL(3.23.48) and PHP(4.1.1).
also using remote host at (www.0fees.net)
last thing i would to say in my computer i success only one time to make connection in window 7 - dreamweaver cs4
and i create this site mwlobby.0fees.net
but now i downloaded dreamweaver cs5 and i need to install new windows
so i need help
any suggestions?Turn your iPhone to a DFU mode and restore it
-
See above. My computer is online but not itune. What can i do???
There is amsg stating itunes cannot connect to itunes store. An unknown error has occured (-3212) Please make sure the network is connected, which I've been on-line the whole time I;ve been trying to fix it . . Please help..ive been on this project for days. ThanksHello Buck
If you are having issues with the iTunes store, check out the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
All of my contacts are not showing up
Once I updated my phone to to iCloud, now all of my contacts are not showing up in my contact list but if I type in the number, they show up. How do I fix this?
-
External keyboard and mouse not working in closed clamshell mode
Hi - can someone help with this strange issue. Yesterday in closed clamshall everything was working fine. Today I cannot use my external keyboard and mouse. Note the external monitor does show the screen (after the blue flicker etc), but keyboard a
-
I'm trying to set up my iPad 2 as a second monitor to my MacBook Pro (with air display). Initially, it worked out fine but after trying it again, the display not only doubled the image on from my Pro, but also shank the Pro's resolution to iPad size.
-
We currently have a ip address on the other interface of a Cisco 2600 running 12.1 that we need to isolate so it cannot communicate via ip with our interface. Would this be possible with an ACL? I have written many of them for our PIX, but I was wond
-
I have a old iTunes user and I want to delete it... How can I do that?