Windows 8.1 (running in VMware Fusion 6) keeps resetting my default program associations after rebooting

I tried to set Google Chrome as my default browser in Windows 8.1 (virtual machine running in VMware Fusion 6) but somehow mysteriously failed over and over again.
According to Control Panel\Programs\Default Programs\Set Default Programs\Set Program Associations, there are 19 possible associations for Google Chrome:
Extensions: .htm, .html, .shtml, .webp, .xht, .xhtml;
Protocols: FTP, HTTP, HTTPS, IRC, MAILTO, MMS, NEWS, NNTP, SMS, SMS, SMSTO, TEL, URN, WEBCAL
I have no problem selecting some of them, or "set this program as default" so that "this program has all its defaults." (I am the only admin user, but not the builtin admin account.)
However, after restarting the VM, the program associations for Google Chrome will reset on its own. Specifically,
"this program has all its defaults" becomes "this program has 14 out of 19 defaults", losing the following five crucial protocols:
FTP, HTTP, HTTPS, MAILTO, NEWS
And these protocols simply hang there unassociated—they don't belong to IE either.
So I am extremely confused; how could the system reset my default program associations? What's wrong?
In case it is relevant, I will also post my VMware Fusion VM Default Applications settings here. All of the options are unchecked: "Open your Mac files and links using Windows applications"; "Open your Windows files and links using Mac applications";
"Run Windows applications from your Mac's Applications folder."
Thank you for your time.

Hi,
I have the same issue, and I've posted on the vmware forums with no responses other than another person having the same issue.
Have you been able to fix this? I tried importing the same VM into Parallels and the problem goes away. If I do a manual uninstall of Fusion (and remove VMWare tools from the VM), and then reinstall both, the problem goes away - temporarily. I had a few
good months, and it started again. Followed the procedure mentioned, and it went away again, but only survived a few reboots.
FYI, it's definitely not an issue with Chrome, as I'm having the same issue with Firefox (although I can duplicate on chrome as well).
Have you figured anything out?
Thanks!

Similar Messages

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

Does TM backup files stored in Windows 7 running inside VMWare Fusion?

I have installed VMWare Fusion with Windows 7 running inside it. There are a number of files saved and application installed there. Are these being backed up on the Time Capsule during the regular backups or do I need to back up Windows apps and files separately?

If the virtual machine is on a drive that Time Machine backs up, it'll be backed up. Quit the emulator before Time Machine runs to ensure the backup is valid; click here for more information.
(54276)

Will Adobe CS6 Design Std Windows run on VMware Fusion 6 on latest Macbook Pro with Mountain Lion OS

Just got a Macbook Pro with Mountain Lion OS. I have CS6 Design Std for Windows and would like to install it on my Mac. Has anyone successfully run CS6 on VMware Fusion 6 with this Mac?
Or Parallels Desktop 9?
Thanks.
Dennis

I am also having this issue. I have a Macbook Pro 13" and 15" and both have issues printing to my works Bizhub C360. It keeps saying "the printer does not support IPP/2.0, trying IPP 1.1" I have uninstalled and reinstalled this printer, installed the printer with an ip address, and even added the printer as a generic postscript printer to no avil. I have OS X version 10.8.4 with the appropriate printer driver. It will ocassionally print but only 1 out of every 5 times. Anyone have any other ideas?

Windows XP OEM - Bootcamp and VMWare Fusion?

Hi everyone,
I need to run Windows on my MBP and just purchased an OEM version of Windows XP with SP2 from ebay (I didn't even know what OEM was at the time - my fault for not doing some more research). I had wanted to install this in Boot Camp and then run my Boot Camp partition through VMWare Fusion when I needed to run both OS's at the same time - will I be able to do this? Or will I be able to only install it in either Boot Camp or VMWare Fusion (if either)?
If I can only install it in one, which would you recommend? I currently own a copy of MS Office for Windows and was going to run that because I need Excel desperately for the business program I am in and need it to run fast (I've heard MS Office '04 for Mac is sluggish for running intense tasks in Excel because of Rosetta on the Intel Macs).
Thanks in advance for any advice!

If you don't activate Windows natively, you can use and run it with VMware without having to change activation.
Rosetta is slow on startup and needs more memory. If you only have 1GB, might want more. Whether to run VMware or Office, 2GB is more comfortable. Your MacBook Pro should be able to run Office Mac or OpenOffice/NeoOffice.
See if VMware works without partitioning your drive which can be messy (read threads on "partitioning first also").
Using OEM copy is fine and can save quite a bit, as long as it is SP2 and - of course - works - though I would never buy it on ebay given you can get it from Newegg, Amazon etc. I am a paranoid skeptic of what and where software I install came from today.
Numbers doesn't seem to be a full replacement for Excel, but have you looked at NeoOffice?

Which version of windows 7 is needed for vmware fusion 5 - 32 or 64 bit

I just downloaded VMWare Fusion 5 and am in the process of getting Windows 7 from the Microsoft Store. Which version of windows is needed to run properly on my Mac - 32-bit or 64-bit? I believe it's the .iso application too, right?
Thanks!

vegasgator wrote:
here are my specs:
i've got a 2.3 GHz i7, 8GB RAM
I only plan on running 3 Windows programs thru Fusion and Internet Explorer some. i think i want to save as much capacity or power for my Mac so would 32-bit be better or does that not make a difference?
Thanks again
32 or 64 makes little difference, and when you are not running Windows (Fusion) your Mac has all the power it had before you installed Windows.

Need Help Cloning Old Windows XP to Mac with VMWare Fusion

Hello I'm new to the forums and I have been searching all over for a good answer on how to do this.
I have a ton of applications, docs, etc. on my old windows xp machine that I need and I am looking for a way to clone the drive it to my mac that is using VMWare Fusion. I have an external hard drive and have tried acronis true image but apparently that doesnt work. So I am looking for a good step by step process on how to do this.
Also later I want to clone the same windows xp drive to another mac that is using boot camp. will that be the same?
Thanks

The easiest way would be to put the PC hard drive into an external enclosure and use Disk Utility or a similar tool to create a disk image file that you can copy to the Mac. You may be able to read the PC disk image format and get VMWare to read the resulting image.
Even if you make it that far, I don't think you will be able to get Windows to use it as a boot drive. You will have much more success just creating a new disk image and reinstalling everything with the correct drivers. Then just copy your documents back over using more traditional methods.

Office 2013 click-to-run does not honor deselecting 'Make Outlook the default program' checkbox

We use an email client other than Microsoft Outlook (let's say Thunderbird)
Thunderbird is set as the default mail client for the machine (HKLM\Software\Clients\Mail\(default) set appropriately)
Occasionally, we launch Outlook (but absolutely do not want it as the default mail client for the machine). About 30 seconds after launching Outlook, we see that the Windows default mail client changes to Microsoft Outlook.The 'Make Outlook the default
program for E-mail, Contacts, and Calendar' checkbox in File->Options is disabled.
Further investigation with ProcMon indicates that a SYSTEM service called integrator.exe starts up about 30 seconds after we launch Outlook. This service changes the HKLM\Software\Clients\Mail\(default) registry key to be Microsoft Outlook.
We have tested with multiple non-Outlook email clients, and the behavior is always the same.
This only happens on click-to-run installs of Office 2013. Regular installs of Office 2013 do not have the problem. Older versions of Outlook do not have the problem.
What can we do to get Outlook to honor the 'Make Outlook the default program' setting?

Kapaal -
Thanks for your reply. Your blog post would certainly work if this was just a user-mode app that was making the change, but that's not the case with Office 2013.
The integrator.exe process that is making the change is part of Microsoft's Click-to-Run system. It runs as a service with local system access, and thus would have full access to the key. I might be able to lock it down by creating a second system
admin account and playing games with it - but that will make it very difficult to actually change the value when I want it do be changed, and I really shouldn't have to be doing workarounds to prevent Office itself from doing this.
- Kevin

How do I reset the default file association for .bat files on Windows 8.1?

Windows 8.1 allows the user to change the file association for .bat files. I made the mistake of using this facility to change the default file association for .bat files to Notepad++. Now when I attempt to run a .bat file, the script for the .bat
comes up in Notepad++, instead of its being run as an executable file! All my .bat files are now useless. I tried finding a way to change this back to the original executable setting, including deleting Notepad++ from my system, but nothing
has worked.
There are discussions that I found on the Internet about this problem, and the solutions to which I was led have not worked either. Most of the solutions apply to Windows 7 or Vista, but not to Windows 8. There are a few solutions that purport to apply to Windows
8 and 8.1, but they do not work for me.
(Disconcertingly, some of the solutions presented for the problem that apply to Vista or Windows 7 and are dated as early as 2009, so this problem has apparently been around for some time, but Microsoft still keeps .bat files on the Control Panel facility that
enables the change to be made. I cannot see why, but there it remains.)
Can someone please help me change this file association back to the original setting for Windows 8.1? Remember, most if now all the links that address this issue are focused on Windows 7. I need an answer that has been tried and proven to apply to Windows 8.1.
Nothing I have tried works.

Hi,
For the issue, we can restore Default File Extension Type Associations through adding the registry entries.
1. Download the .reg file from the following link.
http://www.eightforums.com/attachments/tutorials/8025d1345781188-default-file-associations-restore-windows-8-bat.reg
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
2. Save the .reg file to your desktop.
3. Double click on the downloaded .reg file to Merge it.
4. If prompted, click on Run, Yes (UAC), Yes, and OK to approve the merge.
5. Sign out and in, or restart the computer to apply.
6. If you are logged in as a standard user and this still does not help, then have the administrator also merge the needed .reg file for the listed file extension or protocol below while logged into their administrator account.
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

When installing Firefox 35 into Windows 7 running inside VMware Fusion on a Mac, into which folder should I put the downloaded Firefox installer file?

Inside Windows I see a folder called PROGRAM FILES and another one called PROGRAM FILES (X86). Is either of these the correct one to put the Firefox installer program into before I launch the installer? There is also a folder called WINDOWS. Sorry for such an elementary question but I've never been a Windows user; just Macs so far until now. My intention is to download the Windows version of Firefox using a browser on the Mac side of the computer since I have working browsers there. Then I would copy the ".exe" file to whichever Windows folder is correct. Am I on the right track or am I courting disaster?
Also, will there be a preference inside Firefox to make it the default browser in the Windows environment? I'd like to avoid using Internet Explorer.
( I'm writing this from the Firefox browser, v. 28.0 in the Mac OS (10.6.8). I didn't click the "Automatically Add" button for submitting troubleshooting information because I'm not asking about the browser in the Mac OS environment.)
Thank you.

The full Windows install file from for instance https://www.mozilla.org/firefox/all/ is an executable dot.exe file.
It will run from anywhere the user has the correct permissions, incluing the desktop or the downloads folder. It will offer standard or custom installs, usually opt for the standard install and the necessary flies and folders will be created.
* [[How to download and install Firefox on Windows]]
Setting Firefox as the default browser may be done from an option as Firefox starts after installation
* [[Make Firefox your default browser]] -> (the KB page does have selectors)
** https://support.mozilla.org/kb/make-firefox-your-default-browser#firefox:win7:fx35

Sometimes when I minimize my Firefox window (I always have lots of tabe open), I can't maximize again, even after rebooting.

I usually run Firefox with many windows open. Sometimes when I minimize the Firefox screen, I can't maximize it again. Rebooting doesn't help.

It didn't work the first few times I tried it, but the 3rd time it did. Thanks.

How can I make different windows of the same application I have open remain on their respective desktops/spaces after reboot?

Hi all,
I use the same applications for work, entertainment and other personal activities, so it's impossible to simply assign different apps to different desktops/spaces. Thus, I have open windows of the same programs (Pages, TextEdit, Preview) arranged on several desktops. If I reboot my laptop, the windows are just crammed on Desktop 1. Can something be done about it?

Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi

VMware Fusion Stuck in Suspended State

Hi,
I have a Windows Virtual Machine running on VMware Fusion. I suspended it earlier, but now I get an internal error when I try to resume. I can't shut it down, so I'm unable to get into it. Any tips?

B. Begg wrote:
Hi,
I have a Windows Virtual Machine running on VMware Fusion. I suspended it earlier, but now I get an internal error when I try to resume. I can't shut it down, so I'm unable to get into it. Any tips?
Try holding down the option key when you click the Virtual Machine menu. Among other things, Shut Down will change to Force Shut Down.

Run Windows 8.1 Pro on a SDXC card via VMware Fusion

Hi everyone,
I'm kinda new to the whole Mac story.
Have been using iPhone and iPad from day one, but never could get myself to go off Windows.
Well, a few weeks ago I bought myself a 13.3" MBP (Mid 2014 - 11.1 model).
It's the retina one with a 256GB SSD in it.
Now my question is...
I have a license from work for VMware Fusion 7, and I need some programs to run on Windows.
But I don't wan't to partition my drive and run it via bootcamp, I want to keep my Mac clean.
Does anyone have experience or know if I can run this on a SDXC card?
I would use a 128GB SDXC card with 60MB/s write and 80MB/s read.
Can I stick this SD into the slot, install Windows 8.1 Pro via Fusion on this card and let it run on a decent level?
Thanks in advance,
And with best regards,
Sonicje

Thank you for the fast responds.
I took a look into it and you are right.
The read/write speed is much higher and cheaper.
But, like I said, I'm nog willing to share my drive with Windows.
So I'm going to buy a 64GB USB stick (less than 60 euro) and going to install it on that source.
With 64GB I've some extra space for the futher if I need to work with more Windows only programs.
Thanks again for the advice!

Help! Vmware Fusion and windows vista suck up memory fast.

Hi,
I'm running windows Vista x64 Edition through vmware fusion (v2.0) on my macbook (intel 2.4 ghz) and its sucking up memory really fast. I don't have any snapshots and for the moment the virtual machine takes up about 26 gb of my memory. Everytime I start windows with vmware I immediately lose about 1gb of free space on my macbook, which I then recover after closing down vmware, so I guess that's normal. However my memory keeps on decreasing constantly when using vista, without me doing anything else than using internet explorer (no gaming or downloads) and I never get that memory back. I can't seem to understand what causes this constant and rapid memory loss (it can go up to 2gb of memory loss in an hour). (I also get an error message when starting vmware stating :"serial0: Failed to connect to the Virtual Printer daemon after 25 attempts.", but I think its irrelevant).
Here are some specifics on how i set the settings for vmware:
* Processor: 1 virtual processor - RAM: 1084 MB -Autoprotect:disabled -Hard Disk: SCSI Bus type, 40GB disk size, pre-allocate disk space unchecked, Split into 2GB files checked.
I also tried entering the windows Vista x64 Edition in my virtual machine library by right-clicking and selecting "show package content". I noticed there were files named "Windows Vista x64 Edition-s0xx.vmdk", ranging from "Windows Vista x64 Edition-s001.vmdk" to "Windows Vista x64 Edition-s021.vmdk" and files named "Windows Vista x64 Edition-000001-s0xx.vmdk" ranging from "Windows Vista x64 Edition-000001-s001.vmdk" to "Windows Vista x64 Edition-000001-s021.vmdk". These files take up most of the 26GB of memory of my virtual machine.
I would be grateful for any suggestions as my vmware fusion is rendered useless by this problem (under 2,2GB of free space on your computer you can't even start the virtual machine so I've had to delete tons of stuff to keep it running) and I badly need vista for my studies.
Thank you for your help!

Please post questions regarding Fusion on VMWare's own forums since this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Fusion
http://communities.vmware.com/community/vmtn/desktop/fusion

Windows 8.1 (running in VMware Fusion 6) keeps resetting my default program associations after rebooting

Similar Messages

Maybe you are looking for