Windows 8.1 Small Screen Touch language

hi,
i have bought HP Pavilion 10 TouchSmart 10-e002sl
and it has windows 8.1 small screen touch with office home & student 2013
but it's Italic language and i want it in English ,, how can i solve this problem?

Hi Ahmed Abdel Nasser,
You can manually add or install a language pack from the control panel in the way listed below:
http://support.microsoft.com/kb/2839636
After installing the language pack, you can choose the one you want as a default language:
http://windows.microsoft.com/en-us/windows-8/using-multiple-languages
Regards
Wade Liu
TechNet Community Support

Similar Messages

IPod touch 4G causes windows 7 to blue screen when connecting to iTunes

Wife bought me a new iPod Touch 4G for Christmas. A few days ago it started to cause my Windows 7 (64bit) to blue screen randomly while connected or sometimes when I first connected it. Did a Windows re-install and crashes Windows each time I connect it. It is not the USB port as other devices work fine through all my USB ports. I do load various apps on the iPod several times a day. And it is also bluetooth'd to my wireless wifi switch (same network as my PC). ITunes program on PC is latest version. Anyone have a clue on this one?

Try here:
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
Valentin

ValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

If I put a low resolution video on the new ipad, is it display in a small window or in full screen?

If I put a low resolution video on the new ipad, is it display in a small window or in full screen?

How about 240P ?
Type in Very Angry Cat......................looks like crap on my iPad3.................but most 640 and up look OK

Since upgrade to 3.6.7 the emoticons window on a forum I use always opens full screen, not as a small window. How can I get it to open as a small screen again.

Since upgrading to 3.6.7, when I go to a forum I'm active on and click the emoticons icon in the reply box, the emoticons window opens full screen, and not as a small screen like it did before. I can click on the box to make it small again, but next time I open it, it's back to full screen. Ok, not a major problem, but really rather annoying. I've tried to find a way to get it back to opening the way it did before, but to no avail. Does anyone know how I can solve this little problem?
== I upgraded to 3.6.7

No-one got any ideas on this then? It's definitely a firefox problem, as when I open the forum page (mentioned in the OP) with Opera or Chrome, the emoticons window opens as a small window, same as FF used to before the upgrade.

DPS android app for small screens, works, but poorly...

There is a way to get the DPS android app compatable with 1400 devices, including mobile phones.
In theory if you here reading this its because you have an android app made by the DPS app builder live in the play store and...
A: found out that the android app is only available on large/xlarge screens
B: are getting yelled at by your employer who bought the Adobe DPS subscription and claims this should work on his phone "because I looked at the Adobe site and it says android, my phone is an android, read their site and make it work"
C: found this because you were smart enough to read through the forums before suggesting this as a publishing solution to your employer and want to know if it really works on android phones, in whcih case, you may want to make it easy on yourself and just say "no, it does not" and then waid for Adobe to officially support small/normal screens perhaps head over to this post and bring some attention to it so we can collectivly improve this already awesome tool: http://forums.adobe.com/thread/1097433
however, before you attempt this please keep in mind the following:
1- it does not work well, if at all, on certain devices. specifically the small phone devices with the slower processors. So what typically happens is that you need to delete the data for the app and wait nearly 10 min for the "checking for updates" to process and grab new edditions. Depending on your serivce provider, this can be a nightmare. So, do NOT even attempt this if you have a cap on your data plan, think about how long it would take to download a 100mb folio file on a 3g connection, not to mention the processor which the tablets have and phones do not have.
Here is some more data:
--Android 1 from Sprint: really super slow, thats all I gotta say
--Android 2 from Verizon, again, slow, but works
--Galaxy Nexus 4.1.1, Verizon 4g connection, works great, (10% of the time) lol. about 90% of the time the Galaxy Nexus needs to be restarted after installing, and will get stuck on the "updating library" screen. the only way to fix this for any of the above phones seems to be to clear all data, uninstall, re install, do not launch, restart phone, and then launch app.
I am going to test the following soon:
 Samsung Galaxy Note II N7100 (1.6GHz Quad-core)
 (1.5GHz Quad-core)
 LG Optimus G E973
 Xiaomi MI-2
 LG Optimus 4X HD P880
 HTC One X
(the idea being that perhaps we can go through the list from google in the play store and limit the devices its on, but at least with this solutuon as described below we can get rid of the "not availabe on your device" notice.)
So before you read on, consider that for your end users. If you find a way to fix this, let me know, I have considered turning off hardware acceleration but have not tested this yet.
2- if you choose to attempt this make sure you have a good understanding of command line AND you have a new version of the app ready if you want to roll back.
consider this concept: (you should have these ready)
app a- made by Adobe DPS app builder, works on only large and x-large android screens, lets say its version 100000 and 2.5.5.000. This is already in your google.play store account as a live app,
app b- the app you are about to build in this example below, it will in theory work on small, medium, large, and x-large android screens, lets say its version is 110000 and 2.9.9.000 (it will be MADE FROM APP A, you will open it, edit it, and wrap it back up.)
app c- made by Adobe DPS app builder, works on only large and x-large android screens, lets say its version 200000 and 3.5.5.000 (which would be good to have in case your version b above does not work the way you want)
notice the VERSION codes. These are important because you can only go UP, you can not "roll back" to a previous version.
Again, I do not suggest this, but if you are daring and have some development background, feel free to give it a shot.
(I am not going to be able to support this info, but I can verify 100% that I got mine working, very poorly and slow, but it installs, pulls folios, and loads)
PC WINDOWS ONLY, I have not tried this on a MAC.
get this:
http://www.7-zip.org/
install it
get this:
http://code.google.com/p/android-apktool/
read all about it.
go here:
http://code.google.com/p/android-apktool/downloads/list
get:
 apktool1.4.3.tar.bz2
and
 apktool-install-windows-r04-brut1.tar.bz2
put them all in 1 folder, extract both items, all the way
the grab the
 android-viewer.apk
that Adobe DPS made, or whatever yours is named...
and the
 release.keystore
you made and put them in the same "stuff" folder. there should be 20 items total in here now.
get this:
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u30-download-1377139.html
 jdk-6u30-windows-x64.exe
do NOT use any other version, do NOT use version 7, use version 6.
install it all. then find it. should be here- (C://program files/Java/)
I recomend grabbing it all and putting it in your ROOT like this:
C://Java/jdk1.6.0_30/bin
then, put everything from the "stuff" folder into C://Java/jdk1.6.0_30/bin
yep, all of it.
now we are ready to get funky...
run cmd line.
open start menu, type
cmd
into the search bar, hit enter
-------- run command line, get to proper directory
cd ..
cd ..
cd Java/jdk1.6.0_30/bin
(or wherever your 'stuff' is)
--------open up
apktool d android-viewer.apk android-viewer
(this will make a folder called 'android-viewer' and you will be able to go into that folder and find the XML files in there)
--------edit XML
in file: /android-viewer/AndroidManifest.xml
open up in dreamweaver and change this stuff:
android:versionCode="_ENTER_NEW_NUMBER_" android:versionName="_ENTER_NEW_NUMBER_"
<supports-screens android:smallScreens="true" android:normalScreens="true" android:largeScreens="true" android:xlargeScreens="true" />
in file: /android-viewer/assets/META-INF/AIR/application.xml
open up in dreamweaver and change this stuff:
 <versionNumber>_MATCH_ABOVE_</versionNumber>
 <versionLabel>_MATCH_ABOVE_</versionLabel>
<supports-screens android:smallScreens='true' android:normalScreens='true' android:largeScreens='true' android:xlargeScreens='true'/>
--------package it back up
apktool b android-viewer android-viewer-new.apk
(this will repackage the folder into a new APK, note the name -new.apk added to the end)
--------Sign
jarsigner -keystore release.keystore -signedjar android-viewer-signed.apk android-viewer-new.apk YOUR_ALIAS
(now you need to sign the -new apk and recreate it as signed)
--------Verify
jarsigner -verify -verbose -certs android-viewer-signed.apk
(if the last line does not say 'successfully verified' and there is an error, make sure you are using version 6 of JDK and not 7)
--------Update APK in play store
Visit this page
http://developer.android.com/distribute/googleplay/about/distribution.html#instant
read the line that says "Instant publishing, instant updates"
while you do, understand you are being lied to, it takes anywhere from 30 min to 4 hours for your update to be "instant".
take the new "android-viewer-signed.apk"
rename it, upload it, activate it, de activate the old one.
important: beofe you click save, switch over to the "product details" tab and update your version notes.
head over to your app page in the play store.
sit there and click refresh every 10 min or take a nap and come back in a few hours.
when you finally see the version number has updated, go to the browser on your phone
find your app in the browser, refresh the page, make sure its got the new version number on it.
install it on your small screen device, cross your fingers, and hope you do not get a message that says "not signed properly"
if you do, feel free to start googling the stuff above to see where you went wrong.
If it does work, go to your boss and have him download it and run it and say "see, there ya go, its on your phone now" and when he says it does not work hand him a minni screw driver and a 1.6GHz Quad-core from the Galaxy Note II and tell him to simply upgrade the procssor in his phone because its too slow. lol.
-good luck and enjoi

Hi,
This is very interesting. I'm not an expert but i could do almost all the steps, but i can not do the sign step. i dont know where my release.keystore is. i created a .key.p12 file, is it?
I'm trying to do this for a Galaxy SIII
Thank you

How do I make a window expand to full screen?

I am using Dreamweaver MX 2004 with Windows XP.
My question is a page from my homepage www.artmanphoto.com
> Portfolio > Business Portraits then click on the Gallery
button. When my web designer built my site there was only two
business portraits and when you clicked on the Gallery button the
window was smaller and did not expand to a full screen display.
Tonight I added a third portrait and the window is still smaller
than the full screen display so you have to use the horizontal
scroll bar to view all three images or you can click on the Expand
button in the upper right corner of the screen to make the window
display full screen. I thought that when I added the third portrait
the and it was displayed on my website that the window would expand
to show all three portraits but it didn't.
Is there a way that I can change something to make the window
with the three business portraits open to full screen when you
click on the Gallery button?
Thanks very much for your help!

> Is there a way that I can change something to make the
window with the
> three
> business portraits open to full screen when you click on
the Gallery
> button?
No. Modern browsers are designed to protect users from that
kind of
manipulation. Typically, web users don't want their browsers
windows
manipulated.
Walt
"Bill Artman" <[email protected]> wrote in
message
news:gihqrl$gnq$[email protected]..
> I am using Dreamweaver MX 2004 with Windows XP.
>
> My question is a page from my homepage
www.artmanphoto.com > Portfolio >
> Business Portraits then click on the Gallery button.
When my web designer
> built my site there was only two business portraits and
when you clicked
> on the
> Gallery button the window was smaller and did not expand
to a full screen
> display. Tonight I added a third portrait and the window
is still smaller
> than
> the full screen display so you have to use the
horizontal scroll bar to
> view
> all three images or you can click on the Expand button
in the upper right
> corner of the screen to make the window display full
screen. I thought
> that
> when I added the third portrait the and it was displayed
on my website
> that the
> window would expand to show all three portraits but it
didn't.
>
> Is there a way that I can change something to make the
window with the
> three
> business portraits open to full screen when you click on
the Gallery
> button?
>
> Thanks very much for your help!
>
>
>

"Move focus to next window" shortcut in full screen mode

Does anyone know how to use the "Move focus to next window" sortcut when in "full screen" mode?
When using a smaller screen (Macbook Air) full screen mode is a nice idea but I keep turning it off becauase the normal shortcut doesn't work.
Any pointers in the right direction would be much appreciated.
Cheers

I can't duplicate your problem with my setup. Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and see if that will help. Often a damaged or corrupted pref file will cause some very unusual performance issues with iPhoto.
Also you can try rebuilding the library while selecting just the option to rebuild the database.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

[solved] maximizing window results in white screen

hi, using xfce4 and gdm with nvidia driver (from Arch), 64 bit, using compiz
while in the GUI if i maximize a window, say Thunderbird, the app only shows a white screen. the window decorations are still there and i can restore it down and everything is fine, but when i maximize, white screen
not to post two problems in one thread, but im using emerald via compiz, but i would like to use gtk-window-decorator but if i change it, it does not stick. after a log out/log in it is changed back to emerald
i have tried different emerald themes and i still get the white screen. i think it only happens when the window is opened small to begin with. if it opens full screen i dont have that problem
Last edited by dodgefan (2011-07-19 03:57:39)

i think i figured this out, i was using the latest nvidia driver when i should have been using the 173xx series

How to make PowerBook remember screen layouts from small screen to Cinema

I'm using a 23" Cinema Display with my G4 Powerbook. But I often disconnect the display if I need to take the Powerbook with me around the office.
When I do this, I have to reposition all my windows - finder and apps - where I want them on the small screen. Then, when I reconnect to the Cinema Display, I have to reposition them all over again.
Some apps seem to do this fairly well themselves - like Photoshop and InDesign - but others don't.
Is there some way for me to get the Mac to remember the positions of all the windows in each configuration, so I can just switch between them... a bit like the "Location" (under the Apple menu) does for my network settings?
Thanks for any advice.

I don't think that you'll be able to use the HDMI port - I don't think!
Rather, what you would need is a Thunderbolt/Mini DisplayPort to VGA (if that's what the monitor has) adapter -> http://www.monoprice.com/Product?c_id=104&cp_id=10428&cs_id=1042802&p_id=5107&se q=1&format=2.
Good luck,
Clinton
P.S. Does your monitor have any other input ports? DVI would be best.

My web pages appear out of alignment on small screens.

Hi,
My web pages are correct on my large monitor but, the right side of the pages go out of alignment on smaller screens such as my laptop or even if I reduce the window size of my monitor. I used a 2 col, hdr, ftr, liquid layout in html 5. I did a browser check and fixed the suggested errors but it didn't fix the alignment thing. The site is http://www.thelandingivylea.com

You have the wrong design for a liquid layout. Since you certainly want to retain your design, give the DIVs fixed widths.

How to adjust the window size in overview screen of a scorecard ?

Hi Experts,
In SEM application is it possible to adjust the size of the "Perspective" windows in the Overview screen of a Scorecard ?
If possible how ?

hi,
If you change the window size of the script in the original language, it should reflect in the other languages.
Please activate the script in english once again and see the spanish form again.
@SAP_WIZ
As far as chaniging window size is concerned, Please edit your script in ES and then change it.Or login in ES and then edit the script.
This is not possible, because the original script is in english.
Regards
HM

Pass control to a new window opens a small window.

I am using the following:
WETargetPath ("rpt", "Name", "My Report", "weWindow=New")
How do I open the new window so that it is in Full Screen mode (maximized). Right now, it opens a small window. On Maximizing the window, the report window still remains small?
Thanks

hi shabirdewji,
i have attached syntax for a new weWindowUtilities function which will address the resizing issue when a New window (not a named window but a new un-named window) is opened. this means that when a New window is opened using the webelements target functions, you can then resize the new window and have no resizing issues.
please note that you need to use the weTargetPathExt function instead of weTargetPath if you want to specify the initial new window size. please see the weSubmitMethods report in the webelements 246 download for an example.
the syntax below will open a new window with a size of 500px X 500px. please see the user guide for more info on the wetargetpathext function.
stringvar item1:= WETargetPathExt ("rpt", "Name", "myreport", "", 500, 500, true, 400, 200, true, true, true, true, true, "");
WESubmit("cw1", "link", "Open Report in New Custom Window", item1, global stringvar fontlink);
please replace your webelements246 > admin > wewindowutilities function with the attached syntax.
thanks,
jamie

HT5140 I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

I did put another language in input source, and keyboard shortcut, but when I close this window, after opening the mail window, where do I see different language to click on?

You switch keyboards by going to the " flag" menu at the top right of the screen.

My change to small screen facility has suddenly stopped working. Can anyone help as I use this a lot.

the change to small screen icon in top right hand corner of screen has stopped working. Can anyone help.

When you use the maximize/restore button, the window is restored to its last size. Some websites use a script to enlarge the window to its maximum size so when you switch from maximized to restored you hardly notice any change. You may have to manually resize the window by dragging the lower right corner. Does that help, or is the button just completely not working??

Windows 8.1 Small Screen Touch language

Similar Messages

Maybe you are looking for