Windows 8.1 socket forwarding not working

At one of our customers we had to add an enhanced generic Client application with the vpn socket forwarding mode. With this application we were able to open a special website on one internal server. Last week we updated to SP4 and saw that the socket forwarding
does not work on Windows 8.1. On Windows 7 everything is fine. Can anyone help?
Unfortunately we can not use the normal web application for this website. Some website features doesn't work this way.
Server hostname: srvxy
Port: 80
Executable: iexplore.exe
Arguments: http://srvxy/site

Hi Zuegi,
have you found way around this problem?
We have run onto this same issue with exactly same published application.

Similar Messages

Reopen All Windows from Last Session is not working

The option Reopen All Windows from Last Session is not working, is there any other way to recover the tabs from my last session?
Last night I fell asleep and my friend shut down my laptop.
When I woke up in the morning I couldn't restore my last session which had several tabs opened for my research.
I don't know the exact date when I found them, so I haven't been able to find them in History either.
I've looked around on the internet, but haven't been able to find anything that helped me out.
Hope you can help me! Thanks.

Restart your Mac.
Check the box for: Reopen windows when logging back in
Then check History > Reopen Windows from Last Session

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Windows Vista and iTunes does not work

First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
Karsten

iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

Problem surface pro 2, windows 8. brush pressure is not working in Ps CC ,

problem surface pro 2, windows 8. brush pressure is not working in Ps CC

Este foro es un Foro de Usuarios en español.
Puedes probar a explicar tu problema con mayor detalle.
Indica por favor detalles de hardware
(Podemos estar familiarizados con Photoshop, pero no con tabletas híbridas)
Concretamente, cómo utilizas el pincel de presión?

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

The apps can only be run on an iOS device. They will not run on your PC.

Hairpin forwarding not working with CCME 4 and SIP

We are a VoIP provider and we're trying to install Cisco Unified CME 4.0 for a customer. IOS is 12.4(4)XC1 on a 2811. The customer will use our SIP service as his only outgoing trunk (no on-board ISDN or FXS cards).
On our SIP service we don't support call transfer or forwarding using the "302 Temporarily Moved" SIP method, for billing reasons. The customer needs to to hairpin routing and actually have the call go entirely through his equipment.
Following instructions, we tried enabling hairpin routing by issuing the following commands:
voice service voip
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
dial-peer voice 9000 voip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
Despite all this, when an ephone-dn has call forwarding enabled to an external SIP number, and a call comes in through the SIP trunk, our SIP server gets a "302 moved temporarily" message. It rejects this message and the call fails.
We even tried loopback-dn routing but we still get the same result.
Is there a way to force CCME to route the call through its inside even if it's coming and going from/to the same SIP trunk?
Thank you
-Manuel

Just an update: Davey's post was very helpful as it solved our "call forwarding not working" problem. The solution was to add the "service session" command to my voip dial peers. CME now hairpins forwarded calls correctly.
What still doesn't work at all is call transfer. If I receive an external SIP call and want to transfer it to another external SIP number, I just get the "unable to transfer call" error message on the phone, and both calls are just placed on hold. So it's not a permission problem - the call can be dialled correctly. But when hitting "transfer" the second time, CME doesn't "know" how to join them together (ie. hairpinning).
Cisco TAC's replies so far have been quite strange. I've been told that CME does not support hairpinning and that this is still being developed - apparently not, because call forwarding *does* work now. I'm only missing call transfer, then I'm all set :-)
Thank you
-Manuel

Since upgrade to Windows 8.1, ICloud does not work

Since upgrade to Windows 8.1, ICloud does not work. I could click on buttons for Reminders, Notes, etc. and would take me into ICloud to share with other devices. No longer functions.

Hi:
I can't help you with why your PC won't upgrade to W8.1, but I can tell you that if you manage to get W8.1 to install, you won't be able to get the graphics to work anymore.
There is no W8.1 driver for the graphics setup in your PC.
So maybe it is a good thing that you can't get it to work.

Windows 8, Pavilion, Internal Speakers not working

Greetings,
Objective: To use the regular NoteBook speakers
i.e. not external speakers
Info: Pavilion G7 2235dx
Windows 8.0
** Speakers are not working
** Red X next to Speaker Icon on taskbar
** Sound / Playback / Properties: Digital Display Audio
JAck Info = HDMI Digital Jack
I am thinking the Notebook thinks I am using External Speakers via a HDMI Digital Jack
Any suggestions ??
Many thanks,
Tom
This question was solved.
View Solution.

Just DownLoad and Run !
Four hours into this project,
thank God it is over !!
Released:
2012-10-18
File name:
sp59154.exe [1/1, 43.27M]
Version
6.10.6425.0
Compatibility:
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
PTL !!!!

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

Windows 8.1 store is not working

my windows 8.1 store is not working after the installation the windows i have tried the cmd method to overcome it but not working i have also tried "WSreset.exe" but still nothing happen
another tile like 'people', 'skype' are woking well but not windows store .please help me.
ankit singh

Hi,
Is there any error message when store opened failed? Please try to use APP troubleshooter to fix this problem for test.
APP troubleshooter:
http://go.microsoft.com/fwlink/p/?LinkId=268423
Roger Lu
TechNet Community Support

Creative cloud installed on the desktop, but when I start the window is white and does not work

can someone help me?

Thank god be with
2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
Creative cloud installed on the desktop, but when I start the window
is white and does not work created by Sheena Kaul
<https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6672088#6672088>

Windows 8.1 socket forwarding not working

Similar Messages

Maybe you are looking for