Windows 8.1 Store Instalation Error

HI 
I try to install windows 8.1 from the Store. 
After The Restart i saw a Error screen with this message: unknown drive error.
What i must di??
Thanks
Ruben

Hi Ruben,
Can you upload the screenshot of this issue?
Did you install the latest Windows update?
Please download Windows 8.1 Upgrade Assistant to check compatibility, and then you'll be redirected
to the Windows Store for the free update to Windows 8.1.
Meanwhile,I would like to share the article below with you:
http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
Regards,
Kelvin Xu
TechNet Community Support

Similar Messages

  • Windows Updates won't install - Error 0x80072EFD

    Question 
    Windows Updates won’t install.  I’m receiving Error 0x80072EFD.  What can I do to solve this?
    Answer 
    This particular error means that your computer was not able to connect to the Internet when it tried to install updates.  First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
    Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    To complete this method, follow these steps.
    Step 1: Make sure that Windows Firewall is turned on
    To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
    Click Turn Windows Firewall on or off.
    Click On (recommended), and then click OK.
    Step 2: Temporarily disable third-party firewalls
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
    Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
    Step 3: Try to install the updates again
    If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
    If this method did not resolve your issue, continue with Method B.
    Method B: Temporarily disable third-party antivirus software
    Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Locate and temporarily disable your third-party antivirus software
    Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
    Look for the antivirus software in the list of programs on the Start menu.
    Type the name of the software or the publisher in the Search box on the Start menu.
    Look for the software in Action Center:
    Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
    Click the arrow button next to Security to expand the section.
    If Windows can detect your antivirus software, it will be listed under Virus protection.
    If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
    Note You may have to look in the application documentation to determine how to do this.
    Step 2: Check for Windows Updates
    As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
    If this method did not resolve your issue, continue with Method C.
    Method C: Disable software accelerator programs
    Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
    Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    Step 1: Disable software accelerator programs
    To do this, select from the following options:
    See the documentation that was included with the program.
    View the Help files for your program.
    Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
    http://support.microsoft.com/gp/vendors
    Step 2: Install Updates
    As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
    If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
    If this method did not resolve your issue, continue with Method E.
    Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
    Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
    To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
    Start Windows Internet Explorer.
    On the Tools menu, click Internet Options.
    Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
    Click the Security tab, and then click Trusted Sites.
    Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
    In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
    http://update.microsoft.com
    http://windowsupdate.microsoft.com
    Click OK two times.
    Try to install the updates again.
    If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
    For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

    Mark, I've just been through this update issue with two installations.  In my case, it seemed intertwined with authentification and indexing not working, either.    Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it.  Which is why I did a clean install of Win7 ultimate 64bit on my T61p.  The install (including update) worked great until I ran the intel matrix storage manager update.  This broke windows update.  If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update.  I tracked this down to a driver, iastor.sys, in windows\system32\drivers.    I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed.  To be clear: I couldn't get windows update or indexing to work.  I overwrote* the "bad" iastor.sys with one that worked on another computer.  Rebooted.  Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated.  I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p?  Not listed anywhere on site, links on the web referring to it are all broken.  Is the System Interface Driver now part of another driver program?  Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

  • Windows 7 64-bit instal error on new ST9750420AS Momentus HD in HP Envy 15

    windows 7 64-bit installation error on brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in HP Envy 15 
    I installed a brand new ST9750420AS  Momentus 3Gb/s 750-GB Hard Drive in my HP Envy 15 laptop, and I was getting an error in the last installation step of Windows 7, 64-bit, ultimate, indicating that Windows could not support or be installed on the computer hardware.  It turns out that the drivers for the new internal hard drive, need to be installed/loaded during the initial windows install.
    the drivers that ended up working are available from intel at:
    RST Driver Files v.10.1, 64-bit
    the steps that are requires are:
    1) download the f6flpy-x64.zip file above, and unzip to a usb pen-drive
    2) when installing windows 7, in the configure option of the volumes, even if windows appears to recognize the drive, it is recommended to delete all existing volumes (Advanced options), and then LOAD DRIVER, and BROWSE to the usb pen-drive, while indicating to only list drivers that are compatible with the hardeware.  here is quick list of similar steps with diagrams.
    3) in this case the compatible driver name is "INTEL MOBILE EXPRESS CHIPSET SATA RAID CONTROLLER¨
    4) continue to configure volumes, and installing windows 7,
    5) everything should work fine.

    Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.   
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
    If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
    Thanks in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Windows 7 32-bit install error 0x80070017

    I followed the Boot Camp installation guide's instructions exactly, creating the partition, booting from the disk, formatting the partition. But when it gets to the install, it goes through the "Copying Windows Files" in no time, about a second, then hangs on "Expanding Windows Files 0%..." for a few seconds to a minute, then gives me the error message (Error 0x80070017 - Expanding files (0%) - "Cannot install required files. Make sure all files are available, then restart installation"). I've tried rebooting, removing the partition with Boot Camp Assistant, and restarting the process. Same thing each time. I googled the problem and several people had this issue with burned Windows discs from an ISO. Mine is a fresh-out-of-the-box Microsoft disc. Any ideas?

    It _does not matter_ if it is an upgrade or full retail box version.
    Normally it seems to happen when updating from within Windows, not from install media, but seems to be indicating a disk I/O error. Windows does recognize disk errors better than OS X HFS+. And yes, burning an ISO does need to be done at 2x reduced speed if using Apple's utility.
    It could be the *optical drive* not reading the media; might want to try reburning the disc (you'll need to see if you can install Windows in a VM using VirtualBox or something). Or if you can use another optical drive. Sometimes, soft or marginal memory errors, too. And worth doing a full chkdsk on the partition - you may need to enter command line mode instead of install, choose repair options.
    From Windows7Forum:
    What Worked
    1-I installed windows server 2003 R2 SP2.(which is what server 2008 can be updated from. I didn't need to activate the server 2003 key because you have 60 days to do so and i only needed it for 1 hour)
    2-i download MacicDisc(free download) and installed it on the server 2003
    Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
    3- I took the ISO file(the one that i burned about 20 DVD's with, that never worked)
    and mounted it as a virtual drive using MagicDisc
    4-Load up the setup and update from the server 2003-server 2008
    5-Without any problems at all i had windows server running.
    Thats what worked for me. For those wanting to install windows 7(which is everyone)
    The idea is the same install windows XP professional x64 or Vista x64 (no need to activate)
    Use magicDisc to mount ISO file and upgrade. That should do the trick for everyone, i hope.
    Windows7forums +(last page)+
    For Windows Vista and Windows Server 2008, follow these steps:
    Click Start, type cmd in the Start Search box, right-click cmd in the Programs list, and then click Run as administrator. If you are prompted for an administrator password or confirmation, type your password, or click Continue.
    At the command prompt, type Chkdsk /f, and then press ENTER.
    Press Y when you are prompted to check the disk next time that the system restarts.
    Close all applications, and then restart the computer.
    Note During the restart process, Windows checks the disk for errors and then starts.
    After the computer has restarted, install the updates again.
    If Method 1 does not resolve this issue, try Method 2.
    http://support.microsoft.com/kb/956704

  • Windows Vista / 7 64 Install Error

    Not sure how many people are having this issue in Windows 7 64 / Vista 64, but I've found a fix. The issue is when you try to install iTunes, you get an error like "Could not open Key: UNKNOWN\Components...blah blah blah. Access is denied." What worked for me:
    1. Open regedit (run: regedit)
    2. Navigate to HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Co mponents
    3. Right click "Components" and selec Permissions
    4. Click "Advanced"
    5. Click the "Owner" tab
    6. Under "Change Owner To", select your administrator account (not the "Administrators" account).
    7. Click Ok and exit the registry.
    8. Try to reinstall iTunes.
    I can't say this will work for everyone, it's just what ended up working for me. Good luck!

    I FIXED MINE!! This is what I did:
    1. Select "Start", "Run", and type "RegEdt32"(for VISTA "regedit"). Click OK.
    2. Select HKEYLOCALMACHINE
    3. In the menu, select "Edit", "Permissions". A dialog will come up.
    4. Check "Allow" for "Read" and for "Full Control", then click OK
    5. Expand HKEYLOCALMACHINE and repeat steps 3, 4 for the keys "Software" and "System"
    6. Expand the "Software" key, and repeat steps 3, 4 for "Classes"
    7. Expand the "Classes" key, and repeat steps 3, 4 for "Installer"
    8. If you have made any changes in steps 1 through 7, skip to step 10. If you did not make any changes, continue with step 9.
    9.Open the "Classes" key, and click on "Installer" . In the menu, click "Security", "Permissions." Click the button marked "Advanced." Check "Reset Permissions on all child objects.", then click OK
    10. Close the registry editor
    11. Reboot the computer
    then run iTunes install again.
    Message was edited by: Rob Burt

  • Windows 7 64 bit install error

    I have Window's 7 & I run 64 bit.
    Well Every single time I try to install iTunes 9.2.1 it says that part of the installation failed & it won't let my iPod nano or my gen. 5 iPod run on iTunes. So far every iPod I've tried says no then it tells me to reinstall iTunes.
    Well I've reinstalled like 20 times & I get the same error each time even when installing later versions of iTunes. What's the deal? Help please! I want my iTunes & iPod back working together!

    Are you right-clicking > Run as Adminstrator when you do the install?

  • Window 8 app store showing error while downloading

    iam trying to download window 8.1 update form app store ,my window app store again restart downloading after downloading some 10 t0 11% ,is their any other way to download window 8 update (other then app store such as offline)  

    Hi,
    First, Open Windows Update and check for new updates. Make sure all available updates have been installed in your computer. Also check the hidden updates by clicking on "Restore hidden updates" link given in left sidebar. If you find any hidden update, install
    it immediately.
    If the issue still persists,please try to clear windows store catch to test it.
    1.Press the Windows + R keys on your keyboard to open the Run dialog.
    2.Type WSReset.exe, and click/tap on OK.
    3.The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
    Then,please reset Windows Update components by Fixit tool:
    http://support.microsoft.com/kb/971058/en-us
    If it doesn't work,please upload the WindowsUpdate.log to
    https://skydrive.live.com/ and share the link here.
    The location:
    C:\Windows
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Windows server 2003 R2 install error

    When I try to install SOA on a win server 2003 R2 machine, I'm getting an error popup window entitled "Java Virtual Machine Launcher" with the error "Could not create the Java virtual machine".
    This happens when the install is 99% done and the install is
    "spawning 'C:\oracle\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl startall'"
    Has anyone else seen this issue?

    Yes, I am seeing the same problem. I am trying to install the SOA suite 10.1.3.1 on Win 2003 server (service pack 1), and I get the "Could not create Java virtual machine." pop-up window when it is spawning "...\opmnctl startall".
    Can anyone advise us on this?
    Thanks.

  • Windows update are not install. error Code is 8024200D

    windows 8 update are not install...
    error Code 8024200D..
    please help some body help me for this problem.

     Try here. http://windows.microsoft.com/en-us/windows7/windows-update-error-8024200d REO

  • Windows 7 Pc Suite install error

    i try to install pc suite 7.1 in win7 build 7000 but get error about version not supported even in compatibility mode but i have pc suite running on a previous build of win 7 then upgrade to win7 build 7000 and it works fine
    Application error:
    the palication failed to initialize properly (0xc0000005). click to terminate application.
    if i run it not in compatibility mode i jsut get the error from PC suite this operation system is not supported.
    i connected my Nokia n82 via usb cable then a download from nokia start and i get an very old pc suite version wich works at least to sync the outlooks adressbook but its kinda a step back

    Hi.. as of yet there is not a beta version of PCS for windows 7 at the moment however..
    I have managed to install the PCS & NSU by running them in windows vista compatibility mode.. this is acheived by right clicking the install exe and clicking the compatibility tab and then checking the run in compat mode and select windows vista from drop down meu
    I have managed to even update my E71s firmware via windows 7.. but do remember it is a BETA OS so it is at your own risk you use PCS & NSU with it, I have kept a small vista partition on my PC just incase
    Hope this helps
    Jonas
    Message Edited by jonas_smith_uk on 15-Jan-2009 10:40 AM
    Current Device; Nokia E71-1 F/W v200.21.118
    Past Devices; Nokia 6220 Classic.. Nokia 6500 Slide.. Nokia 5310 Xpress Music.. Nokia E65.. Nokia 6230i & Many Many More!

  • Windows Server 2008 r2 install error gpt partition style

    Good morning I am trying to install Window Server 2008 r2 (trail) on my Dell inspiron 15 and also keep Windows 8 when I set up a partition of 50G and go thru the install it tells me The selected Disk is of the GPT partition style.  How do I fix this
    issue.
    Thanks
    Mike

    Hi,
    Since we are still discussing the same problem, so I merged them.
    I want to confirm some information. Is your computer boot in BIOS mode or UEFI mode? Open computer management->Disk management->Properties->Volumes.
    Is your current partition type GPT or MBR?
    For now,
    starting with Windows Server 2003 Service Pack 1, all versions of Windows Server can use GPT partitioned disks for data. Booting is only supported for 64-bit editions
    on Itanium-based systems. For windows 7, windows VISTA and window server 2008, Booting is only supported for 64-bit editions on UEFI-based systems.
    So, the solution is either to change the boot mode or convert your disk. Remind, if you want to convert your disk, data on it should be cleared.
    Hope this helps.

  • Windows 98 se java install error

    I am in need of assistance. I am trying to help a friend install Java and am having problems with the install. They are using SBC Yahoo for their internet provider, and are using wiindows 98 second edition. I can find the Java folder but cannot find the java icon in the control panel, and cannot get it to work with their browser. I have tried to install Java to no success. Helpppppppp!!!!!!!!!!!

    Thank you for the advice. I have downloaded the offline install and am going to try to remove all java from their system and then do a reinstall. The problem is that when they go to a jigsaw web site the puzzle page will come up but the puzzle will not. It does not even porvide the background window. I appreciate your help and will see if it helps.

  • I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login new one they given the error. Pls help

    I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login they given the error. Pls help

    This may help, it allows you to reset the application, it also may be worth clearing out the app store cache and temp files.
    http://www.ryanragle.com/index.php?/site/comments/where-does-the-mac-app-store-d ownload-temp-files-to
    To contact Apple use the feedback form, this is a user forum and I don't think they will respond here.
    regards

  • Windows update & store download error on proxy

    i cannot update windows and it so some error. and i use the proxy server so i cannot to down load the apps . please help me to resolve it , please remember i know very few basics about computer

    Hello muralitharan665,
    Do you mean that you use the proxy in Internet Explorer and can’t download windows updates and store apps as normal?
    Is this computer domain-joined or personal?
    If the computer is domain-joined, we need to contact the IT department administrator and check if the attempt to manually install the Windows updates and store apps meet the policy.
    Do you receive any error message when you use the Windows updates and try to download Windows store apps?
    Please take the following steps for troubleshooting:
    1. Check if we can normally visit the webpage without proxy
    2. Go to Control Panel\All Control Panel Items\Troubleshooting\All Categories, run Windows updates troubleshooter and share us the error message.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • App store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

    app store on itunes not working error iTune cannot connect to itune store unknown error the network conection is refused on windows 8

    Microsoft Windows 8 Business Edition (Build 9200)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0150B8980AD913B8
    Current user is not an administrator.
    The current local date and time is 2014-03-18 04:37:01.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.5.5 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {240FD97D-8118-4928-BF4E-8A531F89D837}
    Description:    Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {BCD0EF3F-C4A4-402C-969A-C46C079E56A6}
    Description:    Bluetooth Device (Personal Area Network)
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Adapter Name:    {DD5C0797-BC23-4732-85FE-AC59C926EE98}
    Description:    Realtek PCIe GBE Family Controller
    IP Address:    10.144.120.70
    Subnet Mask:    255.255.255.0
    Default Gateway:    10.144.120.1
    DHCP Enabled:    Yes
    DHCP Server:    10.144.120.3
    Lease Obtained:    Tue Mar 18 03:26:26 2014
    Lease Expires:    Mon Jun 16 03:26:26 2014
    DNS Servers:    10.144.5.30
            10.144.130.5
    Adapter Name:    {E7CA4853-FF4A-49AE-AA4E-06BB1DEE67D4}
    Description:    Ralink RT5390 802.11b/g/n WiFi Adapter
    IP Address:    0.0.0.0
    Subnet Mask:    0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:    Yes
    DHCP Server:   
    Lease Obtained:    Wed Dec 31 16:00:00 1969
    Lease Expires:    Wed Dec 31 16:00:00 1969
    DNS Servers:   
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection was refused.
    Connection attempt to Gracenote server was successful.
    The network connection was refused.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: hp DVD-RAM UJ8B1, Rev H.02
    Drive is empty.

Maybe you are looking for

  • My MacBook Pro 15-inch crashes upon startup.

    Hey guys. I'm having huge problems!!!! Please prepaid to me ASAP!! I need this computer to work otherwise I'm screwed for middle schools ( it needs to be fixed by Monday this week ) My Mac wont boot. Every time it boots it will crash. This is the boo

  • APPS are not on my Iphone

    Hi, I reset my Iphone and now, I'm not able to put any apps on it because this icone is nt avail everywhere.  This is a 1st gen Ipodtouch (16GO).  I search everywhere and I found no answer about this situation.  Well, when I open my Ipod, I only have

  • Trying to map java to %ROWTYPE

    Hello: I am calling stored procedure with JDBC and the procedure has an in parameter of type %ROWTYPE. What method do I call on OracleStoredProcedure to pass a value on to the procedure (setObject, setCursor, etc.)? I haven't had luck finding answers

  • LR4 too small on Dell XPS15

    I recently purchase a Dell XPS15 and install LR4.  The problem is the screen display LR4 in such a small font and option boxes it's impossible to read. Is there a fix for this?  I really don't want to change the resolution on my laptop every time I r

  • "nice" command denied in terminal even as root user

    Hello, I am trying to run the "nice" command in terminal as an admin (me): nice -n -19 /Users/Michael/Desktop/Minecraft.app It failed with this error: nice: /Users/Michael/Desktop/Minecraft.app: Permission denied So I logged in a the root user and tr