Windows 8.1 support for HP Scanjet G2410

We have more then 20 HP Scanjet G2410 which were working perfectly on Windows XP/Vista/Win7. Recently we purchase new desktops with Windows 8.1(64 bit).
When we have connected the scanner with the new system, the system installed the driver itself. But now the issue is the none of the scanners are scanning the documents . The scanners starts with some movement and afterwords there is no response from the scanner.
May kindly provide any solution.
Sanjay

Hi,
Please try Basic feature from the following link. This basic feature allows you to scan:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3423841&swLangOid=8&swEnvOid=4158
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Support for hp scanjet 5300C?

Is there support for support for hp scanjet 5300C?

Have asked HP? Check here at the very least:
http://support.apple.com/kb/HT3669#HP
Perhaps you could use third party scanning software like VueScan:
http://www.hamrick.com/vsm.html

Windows and OSX support for Proximity

Is there an install for Windows and OSX support for Proximity.
I have upgraded all of my endpoints to TC7.1.2. (SX, C Series, EX) and Proximity is working great however most of my users bring laptops to meetings not iOS devices.
Any timeframe ?

@dshumake; nice try ;) (thanks for being forgiving with us)
@ablaisdell; agree!
@fcosgrove; we are currently starting a limited trial for Win and Mac clients (EFT, part of TC 7.3). The main feature for the laptop client is sharing FROM your laptop to the video endpoint, so you can skip the cable, dongles etc in the room.
We do have plans for supporting call control and content receive to the laptop as well, but that's later.
The first PC & Mac version has target for first half 2015, but is subject to change (as in: not yet committed).
Br,
Henrik

Windows 8.1 Support for MED-V

Hi
Can i deploy the Windows XP SP3 image as MED-v Workspace to Windows 8.1 Enterprise.
in other words, are MED-V supported to Windows 8.1 ??
Shailendra
Shailendra Dev

Microsoft Enterprise Desktop Virtualization (MED-V) is only supported on Windows 7 Professional, Ultimate, and Enterprise.
In Windows 8 and Windows 8.1 Professional and Enterprise, the virtualization engine Windows Virtual PC upon which MED-V is run is replaced by Client Hyper-V. Bear in mind, however, that support for Windows XP is ending in less than a month on April 8, 2014.
This applies to MED-V and virtual environments such as Hyper-V clients as well as physical machines. There
is a great write up on MED-V and Windows XP End of Support here which I would highly recommend reading through in addition to
the information on Windows XP EOS.
Brandon
MDOP on the Springboard Series on TechNet

Is Windows Azure officially supported for Exchange 2013?

Though Exchange 2013 can be installed on Windows Azure, however can somebody help me in knowing that if its officially supported with it OR can live environment of Exchange be setup on Windows Azure?

Hinte is correct.
You can set up a Exchange 2013 lab in Azure. You may have seen that Henrik Walther has done just that:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/deploying-exchange-2013-hybrid-lab-environment-windows-azure-part1.html
But this is just for practice / training.
Besides lack of support, cost of sufficient resources to run E2K13 correctly would be greater than simply using O365 / Exchange Online.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Adobe CS6 Windows Production Premium Support for NVidia K5000 Video Card?

When will Windows version of Adobe CS6 Production Premium support the new NVidia Quadro K5000 Video card?
We currently so not have GPU Acceleration.
Help!!!!

NTVWEBAdmin wrote:
Hopefully soon. How will we know when it is?
I wish I could tell you....
I work for Adobe, so I can't.
Thanks for your feature request!

Windows 64 bits support for UCM

Hi.
We are currently preparing a fairly large UCM deployment for one of our customers. This customer requires use of Microsoft Windows on all his servers, preferably the 64 bits flavor. The actual machines are recent 64 bit Xeon boxes.
What is the timeframe, if any, for the availability of a UCM version certified for such a setup?
Thanks for your answer.

last time I checked, 64 bit windows support was a pretty low priority. There's little reason why Stellent would require a 64 bit processor... except in rare cases where you need more than 2 GB of RAM to run your system.

Windows Professional x64 Support for Audigy 2 ZS Video Edi

Is there some reason why the Video Editor isn't x64 compatible yet?

For Video Blaster Editor ... we are currently taking steps to insure it runs under 32-bit Vista.
Regarding Vista and Audigy 2 ZS Video Editor ... here are some tips from another user. [I am going to answer every query on this thread with these instructions ... so you'll be sure to see them quite a bit]:
I have used the follwoing procedure to install a working configuration of the Audigy 2 ZS Video Editor in a clean install of Vista Ultimate.
() Download from Creative Labs (US) site: http://us.creative.com/support/downloads/ the following files:
(a) Creative Sound Blaster USB Series Windows Vista Driver .00.0060 - USBVS_PCDRV_LB__00_0060.exe (from the Vista section)
(b) VidCap for Creative Sound Blaster Audigy 2 ZS Video Editor .00.000 - A2VX_PCVDE_L9__00_000.exe (from the WinXP section)
(2) Use WinZip or WinRAR to open the file (b) and extract the folders \DrvInst and \Vidcap into your Vista Downloads folder.
(3) Connect the Video Editor to the power supply and a video source; connect the USB cable to your PC. Ignore the "Found NEw Hardware" dialog that pops up.
(4) Doubleclick on file (a) to install the Creative Sound Blaster USB Series Windows Vista Driver, and follow prompts as required; accept all defaults. After install is complete, let the PC reboot.
(5) After rebooting, in the "Found New Hardware" dialog that appears, select the options to search for a driver, don't go online to search, browse for a driver and point the search at the \DrvInst folder you extracted in (2) above. The USB video driver will be installed from the \DrvInst\Video\Driver\Win2k.
(6) After the video driver is installed, doubleclick on the Setup.exe file in the \Vidcap folder you extracted in (2) above to install the Vidcap application.
(7) Setup the options in Vidcap, and run a test recording.
Happy capturing under Vista.

Windows 2003 CA support for 2012 AD

We are looking to upgrade our AD from 2003 to 2012. However we have an enterprise CA and and an offline CA, both running windows 2003. Do we need to upgrade the CA services in order to support the 2012 AD servers?

No, you can operate W2K3 CAs in a 2012 AD. It is more sort of "the other way round". Using all new Windows 2012 (and 2008 R2) features would require AD schema 2012.
But I would have a look at the
new 2012 features though, and the
new roles for HTTP enrollment added with Windows 2008 R2.

Windows 7 driver support for T60(p)

Hello all
Im a happy owner of a Thinkpad T60P, 2007-8LG model. However, im getting much tired of Windows XP and want to use the upcoming Windows 7 OS, but im a bit unsure if there will be any driver updates for the T60 models.
I've seen the Windows 7 beta drivers page from Lenovo, but this only includes drivers from T61 and up. Can anyone confirm that there will be drivers released for T60(p) models as well (or in case the product line is ditched).
Thanks in advance
Solved!
Go to Solution.

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

MOVED: Windows 7 driver support for the Mega 865 Pro

This topic has been moved to Windows 7.
https://forum-en.msi.com/index.php?topic=128122.0

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

HT201178 With the coming of OSX Mountain Lion, will there be support for a late 2006 iMac (currently running OSX Lion

With the coming of OSX Mountain Lion, will apple be supporting a late 2006 I mac currently running OSX Lion?

Ahhhh. Well, now you have earned a "Slap Kappy" coupon good for one slap. Expires in 30 days.
The 64-bit kernel thing will leave a lot of use behind. My main machine is a 2006 Mac Pro on which I've spent some money putting in two 4-core CPUs and an ATI 5770 GPU in the past year. If I want to run ML I can't do so. The only options I have for a desktop Mac is either a newer Mac Pro model - post 2007 - used or refurbed or a recent or new iMac. This assumes the Mac Pro line may be dropped. Apple has been very mum on that.
Clearly, Apple wants to get users of older hardware to buy new machines in order to run ML now and in the future. Because it is possible to boot the older models with the 64-bit kernel via some hacking, Apple might have been able to install ML on them by adding some code and retaining 32-bit drivers where needed, but they've chosen not to take that route. I think it's a bit of a marketing ploy to help drive up sales of new Macs, but I appreciate that Apple has chosen to abandon legacy support in the past in order to avoid having an OS like Windows - bloated by support for older and older hardware.

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

Scanjet G2410 not working in Windows Embedded Standard 7 x32

Not installed the driver for the scanner "scanjet g2410" in "" Windows Embedded Standard 7 x32 "
Installed as an administrator from the CD and downloaded the latest version from the official site, but every time after the installation refused to start "Solution Center", stating that "the installation center solutions has not been completed, re-install ..." and so on. d.), and in Device Manager reported that "The device is configured incorrectly."
Tell me, what can be done?
PS: message written by google translator

Hello _tetsujin_,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Scanners.
The support page for your product may be helpful in the meantime: HP Scanjet G2410 Flatbed Scanner
I hope this helps!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to install drivers for HP Color Laserjet 1215 and HP Scanjet G2410 on Mavericks?

I recently purchased MacBook Pro and upgraded the OS to Mavericks. I am unable to find drivers for my HP Color Laserjer CP1215 printer and HP Scanjet G2410 scanner which I was using with HP Laptop. Google search yielded instructions at http://foo2zjs.rkkda.com/INSTALL.osx for the HP CP1215 printer. However, the instructions don't seem to be working on Mavericks. So, I am stuck with a printer and scanner which don't work with Mac. Thanks in advance for any help.
Ajit Singh

I don't see either of those models on http://support.apple.com/kb/HT3669. You should probably check with HP to see if they are still supported.
https://discussions.apple.com/message/23611767#23611767

Windows 8.1 support for HP Scanjet G2410

Similar Messages

Maybe you are looking for