Windows 8.1: Thread Creation Error: Not enough St...

I have done all the steps
1) Reset the Internet Explorer
2) Currently haivng the latest version of Skype (7.5.64.102)
3) Latest and updated version of Windows 8.1
4) Internet Explorer version 11.0.9600.17801
Event Viewer
: Faulting application name: Skype.exe, version: 7.5.64.102, time stamp: 0x556dd607 Faulting module name: mshtml.dll, version: 11.0.9600.17801, time stamp: 0x5536793e Exception code: 0x4000001f Fault offset: 0x00db3608 Faulting process id: 0xcbc Faulting application start time: 0x01d09e3af411afc9 Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe Faulting module path: C:\Windows\SYSTEM32\mshtml.dll Report Id: 9f878ed6-0a37-11e5-bedd-a4db3020abbb Faulting package full name: Faulting package-relative application ID:
Thanks
Abhishek Alekar

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

Thread creation error: Not enough storage is available to process this command

Two user in my company have this problem, I have already used the solution on the community but would come back after 2 to 3 weeks. They all have the message "Thread creation error: Not enough storage is available to process this command". I tried increase the virtual memory to 4Gb, update one client to the latest, reset IRPStackSize, delete temp folder. one client is 7.5.XX with windows 7 and another is 6.20.0.104 with Windows XP,My machine is also 6.20 with windows 7 but I dont have this problem.

Version previous to 7.6 worked fine. After update I have got this message and mostly of Skype GUI turns black or vanishes. No possibility of making more than one call before crash, It is amazing that a thread started about two weeks ago has no technical answer, at least. What do I do with my credits and my appointments? Throw them away?

Thread creation error: Not enough storage space

Hi,
Recently (the past week or so), my desktop client for Skype has been crashing regularly. This is accompanied by large (over 1.2GB) amounts of memory usage. At semi-regular intervals (say every few hours), Skype will post an error with the text "Thread creation error: Not enough storage space..."
I am using the latest build of Skype. I am not performing any Skype logging. This error is clearly an ongoing issue which has not been addressed, as prior threads have discussed this as well.

Errors like this have been addressed and continue to be addressed. Being that the errors are related to memory leakage of one form or the other, the problem can have several sources and be agitated by several programs. I personally run the latest version on all my machines in a 24/7 capacity and have not run into the problem. Some versions in the past created a similar error for me, yet the latest has not. If you've already updated your IE's flash and that has not alleviated the problem, the only other solution is running an earlier release that doesn't crash for you or restart Skype more often. I've had virtual video devices trigger this behavior by simply launching the video settings once. The virtual device even when not in use continued to consume memory under Skype until it crashed. So if you use any virtual audio/video components you may want to remove them to see if that changes anything. Some people have also blocked ads when those were the source.
http://community.skype.com/t5/Windows-desktop-client/low-storage/m-p/3974193/highlight/true#M344826

Can not sych iPod after Windows XP re-install..error not enough free space

My laptop required a re-install of Windows XP. Now i receive an error stating iPod cannot be synched because there is not enough free space to hold all of the items in the iTunes library (19.35 GB requried, 3.06 GB available).
Since nothing has been added to the iTunes library (that I know of) how is this possible?
What do i have to do to correct this?
Thanks

I was talking about free space on the ipod.
a normal synch did not work.
I believe I have found the what is wrong, but not the actual cause of the problem.
it appears that my itunes library has included every song and video on my computer, even though they were not in itunes before the re-install of the OS. Further, many albums have duplicated themselves in the itunes library. It looks like i will have to go through the entire library in itunes and remove everything that shouldn't be there and remove all of the duplicates.
thanks

Touchsmart 610 - installing windows 8 on a partition, error, not enough space on system partition?

I created a 150 gb partition to install Windows 8 so I could dual boot Win 7 and Win 8. When I try to install I get a message that there is not enough free space on my 'system' partition. The only thing I can think of is that it is referring to the system (reserved) 100mb partition. It only has 10 mb of free space. Obviously the partition I want to install on has plenty of space. Has anyone had this problem and gotten around it?
UPDATE: Found the problem with my 100mb reserved partition. I assigned a drive letter to it through disk management and saw a file 'test.vhd' of 55 mb. I recognized this as a virtual drive I had created and deleted a few months ago! Deleted this file and then removed the drive letter assignment, and Windows 8 installed on my partition in about 15 minutes.
This question was solved.
View Solution.

Hello meezer,
Glad you was able to get it installed. It always seems to be the little things that cause us the greatest problems.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

Bump VMware Server 1.0.7 Latest error --Not enough memory...

VMware Server Help Post
Platform:
Intel core 2 Duo E2168.
2G ram, but 1/2 just went missing. If this is causing my problems, the mind wobbles, yet it's easy to fix, yay!
Lots of harddrives! Lots of harddrive space.
gigabit eth.
Nvidia 7600GS 512MB
Highpoint raid card (soft) 132Gigs for VMs
Archlinux w/ 2.6.26.3-1 kernel
kernel-headers 2.6.25.8-1
History:
Four weeks ago--
Patched and installed VMware Server 1.0.5 on Archlinux with kernel 2.6.25... everything worked well. Bliss!
About 2 weeks ago--
Upgraded kernel to 2.6.26... time suck began.
Current status:
After banging on VMware and vmmon patch and source code for a while,
now have on kernel 2.6.26-arch--
VMware Server 1.0.7 with patch ...117d, modified as follows:
In .../vmmon-only/include/iocontrols.h
line 48 #define VMMON_VERSION (168 << 16 | 0) changed to:
line 48 #define VMMON_VERSION (138 << 16 | 0)
Patch reasoning [limited newb alert]:
Without 117d, vmmon fails to compile with error re: .nopage
With 117d, vmmon compiles and installs successfully but VMs
won't start with error re: expect version 138 got 168
With patch modified, now past the version error, but getting the error:
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
In log:
Failed to connect to vm: /mnt/VMs/Test Booger/Test Booger.vmx
vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
Error during launch: 11, The process exited with an error:
End of error message
Operation failed to change the VM to the expected power state.
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped    [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
There's plenty of memory and disk free space--
top -b >> top_out
top - 06:59:46 up 40 min, 0 users, load average: 0.02, 0.05, 0.03
Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.1%us, 0.5%sy, 0.0%ni, 97.2%id, 1.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1034920k total, 441944k used, 592976k free, 17604k buffers
Swap: 2000084k total, 0k used, 2000084k free, 227224k cached
df -ha
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 72G 44G 25G 65% /
/dev/sdc1 20G 12G 7.5G 61% /mnt/home2
/dev/mapper/hpt45x_dcafabbcai1
153G 21G 132G 14% /mnt/VMs
I reduced host memory settings to 408MB and guest to 256MB as a test. [No effect]
After the tests I've done, I don't believe this error really has anything to do with low memory.
I don't know whether this is a bug, a patch problem, or, or, or, or .....
And so I post.
What next?
thanx in advance.
Last edited by maxbally (2008-09-15 23:33:21)

Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please.  Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.

Error: Logon rejected for Unable to obtain Terminal Server User Configuration. Error: Not enough resources are available to complete this operation.
The problem is that the SharePoint server will
function just fine for a week or so and then suddenly when a new user tries
to log on they get an error message indicating that not enough resources areavailable to
log them on and also user will to credential prompt while accessing share point site .
Raj

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Error "not enough memory to complete this operation"

Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
Attachments:
Project fo 2 PC.zip ‏108 KB
Project for crio.zip ‏114 KB
Error.JPG ‏14 KB

Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)

Compilation process error : Not enough space

Hi Experts,
I have transported two mapping routines from development system to the Testing system, but when I am trying to activate the mapping routines only one got activated and the other shows the below error
Compilation process error : Not enough space
STACKTRACE:
com.sap.aii.utilxi.swing.framework.FrameworkException: Compilation process error : Not enough space
    at com.sap.aii.ib.gui.editor.XiDocument.checkConsistency(XiDocument.java:780)
    at com.sap.aii.ib.gui.editor.XiDocument.checkObject(XiDocument.java:799)
    at com.sap.aii.ib.gui.editor.CheckObjectCommand.execute(CheckObjectCommand.java:38)
    at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
    at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
    at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
    at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
    at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
    at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
    at javax.swing.AbstractButton.doClick(Unknown Source)
    at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
    at java.awt.Component.processMouseEvent(Unknown Source)
    at java.awt.Component.processEvent(Unknown Source)
    at java.awt.Container.processEvent(Unknown Source)
    at java.awt.Component.dispatchEventImpl(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
    at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
    at java.awt.Container.dispatchEventImpl(Unknown Source)
    at java.awt.Window.dispatchEventImpl(Unknown Source)
    at java.awt.Component.dispatchEvent(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
Please suggest to resolve the issue.
Thank you,
MK

Goto XI server machine and check the drive spaces. U may also use DB2 transaction. Ur BASIS may help u with this
Regards,
Prateek

RoboCode crashes with SeedGenerator thread creation error?

Hello everyone.
I recently came across a game called RoboCode. It seems to be a tank battle simulator where you write the AI in Java.
Unfortunately, it won't start on my Windows computers. I get this error:
Exception in thread "SeedGenerator Thread" java.lang.InternalError: internal error: SeedGenerator thread creation error.
at sun.security.provider.SeedGenerator$ThreadedSeedGenerator.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Anyone got any idea why? I haven't the foggiest clue how to fix it or get around it - or even what it means.
Thanks,
-Kramy

I'm awaiting a reply right now.
But if Google couldn't turn up much, then it probably isn't a very common error? ;)

DHCP Split-Scope Configuration Wizard showing error "Not enough storage is available to process this command".

Hi,
I'm trying to split the DHCP scope between two Servers using the DHCP Split-Scope Configuration Wizard.
Server one is a VM hosted on Hyper-V and is running Windows Small Business Server 2008 (I think this was previously SBS2003 and was upgraded at some point in time). The whole DHCP scope is currently configured on here.
Server two is a VMware VM running Windows Server 2012 R2.
I've installed the DHCP Server role on Server two (2012R2) and authorized the Server. When I launch DHCP Manager, add the SBS2008 Server in the MMC, right click the scope and choose "Advanced > Split-Scope", and then run through the wizard,
I get as far as the "Percentage of Split" screen, and when I click next I get the error "Not enough storage is available to process this command".
I've searched online for this particular error message and I've come across articles suggesting AV exclusions are not in place for the DHCP database and files, however in this case the exclusions are definitely in place and I've also tried completely disabling
AV on both Servers and this made no difference to the outcome.
I also came across articles suggesting the "IRPStackSize" registry DWORD needed to be added and set to a decimal value of 15 or larger. Again, I've tried adding this and rebooted both Servers but I get the same result.
Anyway have any ideas?
Thanks,
Craig

Hi Eve,
No, there were no related events in the event logs. I've since tried splitting the DHCP scope manually but this did not work - the DHCP Server on the SBS would just stop and event: 1053 was displayed when trying to start the service again. I noticed
that as soon as I de-activated DHCP Server on the 2012 Server then the DHCP Server on the SBS would start again.
I then found the following in a TechNet article that would suggest I cannot have another DHCP Server on the network if using Small Business Server.
Notes
A DHCP server running Microsoft Small Business Server will not operate if another DHCP server is active on its network.
Detection of unauthorized DHCP servers requires the deployment of Active Directory Domain Services and the DHCP service. Other DHCP servers do not attempt to determine whether they are authorized by Active Directory Domain Services before offering IP address
leases.

Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"

I have a project a Encore CS6 V6.0.1.013 for MAC.
I tryng export do Blu-ray Disc, but ireceved this error message
Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"
But at "Disc Info" i have 14.71mb free

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

HT1926 I tried to update iTunes in Windows 7, but the program said not enough permission to start services.

I tried to update iTunes in Windows 7, but the program said not enough permission to start services. I tried to reinstall iTunes, but the same message showed up. Do I need to uninstall Apple Mobile Service. I tried but I couldn't uninstall it. What should I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

I'm getting an error: not enough space to backup on icloud, but I do have enough storage available. Can you advise?

There shouldn't be any fee involved. Call the Apple online store for your country (1-800-MY-APPLE in the U.S. and Canada) and request a refund.
If the download is stuck, you can download in iTunes on your computer, then sync it to your iPad once your free up some space. This explains how to download your previous purchases to your computer: http://support.apple.com/kb/ht2519.

Windows 8.1: Thread Creation Error: Not enough St...

Similar Messages

Maybe you are looking for