Windows 8.1 - Update 1 requirements

Hi,
Has anyone come across a list of prerequisite updates that Windows 8.1 Update 1 (KB2919355) requires ?  According to the link below, it particularly needs KB2919442, but doing some testing & manual installing, it looks like it needs more updates
than just that one.  Currently we only deploy updates that have a severity level (eg. Critical, Important, etc.).  KB2919442 has a severity level of None, so it doesn't get deployed.  Windows 8.1 Update 1 (KB2919355) has a severity level of
Critical.
http://windows.microsoft.com/en-ca/windows-8/install-latest-update-windows-8-1
Thanks

Have a look at this : 
Version:
2919355
File Name:
clearcompressionflag.exe
Windows8.1-KB2919355-x64.msu
Windows8.1-KB2932046-x64.msu
Windows8.1-KB2934018-x64.msu
Windows8.1-KB2937592-x64.msu
Windows8.1-KB2938439-x64.msu
Windows8.1-KB2959977-x64.msu
Date Published:
5/05/2014
File Size:
38 KB
690.8 MB
48.0 MB
126.4 MB
303 KB
19.6 MB
2.8 MB
- Less
KB Articles: KB2919355
Security Bulletins:MS14-018
To start the download, click the Download button and then do one of the following, or select another language from Change Language and then click Change.
Click Run to start the installation immediately.
Click Save to copy the download to your computer for installation at a later time.
These KB's must be installed in the following order: clearcompressionflag.exe, KB2919355, KB2932046, KB2959977, KB2937592, KB2938439, and KB2934018.
KB2919442 is a prerequisite for Windows 8.1 Update and should be installed before attempting to install KB2919355
To start the download, click the Download button and then do one of the following, or select another language from Change Language and then click Change.
Click Run to start the installation immediately.
Click Save to copy the download to your computer for installation at a later time.
These KB's must be installed in the following order: clearcompressionflag.exe, KB2919355, KB2932046, KB2959977, KB2937592, KB2938439, and KB2934018.
KB2919442 is a prerequisite for Windows 8.1 Update and should be installed before attempting to install KB2919355
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

  • Iphone 4S, recently updated to IOS 7.0.2 When I try to sync with my Mac window pops up saying iphone requires itunes version 11.1 or later. Disconnected, switched both off and back on, no change. Any ideas?

    I have an iphone 4S, recently updated to IOS 7.0.2. Tried syncing with my Mac but window pops up saying iphone requires itunes version 11.1 or later. Tried updateing itunes but it says it's up to date. Tried disconnecting, switching both phone and mac off and back on, no change. Any ideas?

    bristles wrote:
    ... the version I'm on is 10.5.8.
    If possible... you need to Upgrade to Snow Leopard = OS X 10.6.x  (which will Run iTunes Version 11)
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
    Be sure to make a Backup of your Current System Before Upgrading...
    NOTE:
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com
    The above site also has videos on how to Install RAM should you need it...

  • On Windows Vista, installed AdobeAir update as required. "Mandatory Upgrade" removed Acrobat!

    On Windows Vista, installed AdobeAir update as required. Next screen said "Mandatory Upgrade" & when I clicked on it, version 2.0 of Acrobat was removed, new version 3.2 wouldn't download error# 16820! What do I do now? Need Acrobat, but I don't know what to do next! I'm working at a small church w/no budget. so please help if you can.

    Vista requires AA8.1 at a minimum. I think that a few have gotten AA7 to work, but it is not supported by Adobe on VISTA. I know that is not good news, but it may be that you will be unsuccessful. At the very least, expect to have to print to file and open distiller to complete the conversion. I think that AcroTray is one of the major problems with the use on VISTA.
    Hopefully someone might stop by that has successfully gotten over the registration problem you are having, and possibly gotten AA7 to work in some sense on VISTA, but do not be surprised if there are no takers. Good luck.

  • I went to update my itunes and I get the following message:  there is a problem with this windows installer package, a program required for this install to complete could not be run.  I uninstalled the old itune and reinstalled the new one and i get the s

    I went to upgrade itunes and when it finally downloaded, i got the following message:  There is a problem with this windows installer. A program required for this install to complete could not be run.
    I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think.  It dowloaded fine to a point and before finishing, it came up with the same message.
    Is the problem with the itune installer or my windows installer on my laptop?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

  • Trouble updating itunes - this message appears "there is a problem with this windows installer package. a program required for this install to complete could not be run"

    trouble updating itunes - this message appears "there is a problem with this windows installer package. a program required for this install to complete could not be run"

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this  install this to complete could not be run. can anyone help?

    Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this  install this to complete could not be run. can anyone help?

    Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this  install this to complete could not be run
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • The minimum hardware requirements for Windows 8.1 Update 1

    Hi
    What are the minimum hardware requirements to install Windows
    8.1 Update 1 on a computer?
    Thanks
    Bye
    Balubeto

    does every machine not have 1ghz+....   
    go ahead and try running windows 8 with those specs and even better run the steam overlay too and see what happens.
    any decent processor is 3.4ghz+ with 8gb of ram not to mention that dx11 came out with windows 7... 
    there is cell phones with better specs than the min requirements so both your posts are useless.  
    there is a standard to uphold and that is exactly what i always trying to do my best at.
    why sell a copy of windows if its just going to frustrate a customer when its not perfectly compatible with the system?
    o... lets just have everyone install windows 8 because its new and this page says it can handle it...
    lets make it 64bit too because higher numbers are cooler...  because it wont matter if its suppose to have 32bit...  
    iron8orn AMD FX [email protected] on MSI 970A-G46 8gb ram cas 8 1600mhz cpu-nb 2400mhz MSI hd7850x2 ht-link 2400mhz

  • T430s - Unable to install Windows 8.1 update / Requires Rapidboot to be uninstalled

    Hi folks, I'm trying to install the Windows 8.1 update on my Windows 8 Pro but I'm in front of an issue. After doing the check to perform the update, it does ask me to uninstall RapidBoot in order to perform the update. I've checked in my programs to uninstall it but I can't find it, updated my chipset drivers, Intel Rapid Storage Technology software, etc and problem still happening. I've even check my services but I didn't find anything related to Lenovo Rapidboot. Any clue on how solve this issue? Does anyone had the same problem? Please advise. Regards, poy

    1. Seems your computer is compatible with W 8.1 x64
    http://www.dell.com/support/drivers/us/en/19/Product/inspiron-15-3521
    2. Give atry to following
    http://social.technet.microsoft.com/Forums/windows/en-US/fe87d35b-12b7-4176-89de-a38601937c9d/windows-store-doesnt-let-me-upgrade-to-81-says-i-am-not-administrator?forum=w8itproinstall
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/cant-update-to-win-81-admin-privileges/bd83adf5-d45e-4b9f-84dc-ede7cf67313c
    3. Double check if prerequisites are met.
    http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
    Regards
    Milos

  • Unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1

    Apologies if this is not the right place or this has been posted before (I looked and didn't find anything)
    I am unable to install SQL Server 2014 Express LocalDb on Windows 8.1 Update 1, as I get an 'Operating System not Supported' error message right away.
    What can I do to get this working?

    Hi Zgreve,
    Usually, from
    hardware and software requirements for installing SQL Server 2014, we can install SQL Server Express version on the Windows 8.1. For more information, see:
    Microsoft SQL Server 2014 Express.
     Before you install SQL Server 2014 Express version, you should ensure installing the .NET Framework 4, then run as administrator for the SQL Server setup.exe again.
     There is a similar detail about install SQL Server Express LocalDB via GUI and command line. You can also review the following steps.
    http://www.mssqltips.com/sqlservertip/2694/getting-started-with-sql-server-2012-express-localdb/
    If the same error about OS still exists,  I recommend you submitting a feedback to Microsoft such issues at
    https://connect.microsoft.com/SQLServer/Feedback, Your feedback enables Microsoft to offer the best software and deliver superior services, meanwhile you can learn more about and contribute to the
    exciting projects on Microsoft Connect.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system

    Hi,
    I am trying to install VPN Client from my client site. While installing i am facing the below error.
    Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system. Use the link below for more information on installation, or open Windows Update and install all available critical updates. When you're finished updating
    your system, log out and try again. If you're still having problems, contact your system administrator.
    http://support.microsoft.com/kb/2621440
    I went through all the related sites but still i did not find any solution. Under Windows installed updates i could see the security update for Microsoft windows (KB2621440). If its already exist why it is not taking this security patch? 
    Kindly guide.
    Best Regards,
    Yadav Kankanwadi

    Hi,
    Based on Microsoft Security Bulletin MS12-020, this security update resolves two privately reported vulnerabilities:
    KB2621440 and KB2667402.
    http://technet.microsoft.com/en-US/security/bulletin/ms12-020
    Thanks!
    Andy Altmann
    TechNet Community Support

  • "the ipod 'name' cannot be updated. the required file could not be found."

    PLEASE can someone help me out on a problem that is infuriating me?? i've not long had my 30GB 5th generation video ipod, and i can't get any photos or video to transfer onto it! when i connect my ipod and itunes opens up, an error message appears saying "the ipod 'name' cannot be updated. the required file could not be found". however, it updates my music no problem..
    i've reset my ipod, restored it and wiped all my music off and then transferred it all back on, downloaded the new ipod updater 28-06-2006 and made sure my ipod has the most recent software etc on there, but still no joy!
    i never had a problem transferring photos onto my old colour photo ipod (4th generation?), so it's really annoying that i have a supposed 'better' ipod now that won't do this for me!
    any help guys? please note, i am no techie - please put any advice in simple terms!
    Packard Bell desktop   Windows XP  
    Packard Bell desktop   Windows XP  

    Hello WGT52,
    It sounds like this error message is preventing you from syncing your content to the iPod. I would recommend the troubleshooting steps in the following article:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Error: ipod cannot be updated - the required folder cannot be found

    Just purchased a 30 gb ipod, and when connected to my itunes (currently version 7.1.08), gives me the error message that says, "so and so's ipod cannot be updated - the required folder cannot be found." after a bit of updating. The ipod then drops out of itunes, but not windows, for some time, only to return later and do the same thing over again. Any ideas?

    i got the same problem as you, but it appeared only after i tried to sync the ipod using another user account in windows.
    I have tried restoring the ipod, clearing out the itunes library and reloading it etc, all to no effect.
    usually it would just hang there until i reset it, and after resetting, it would work for awhile, before it would hang again.
    this is getting frustrating for me as I cant even listen to music on the go like I used to.
    anyone has a better solution?
    I've tried re-installing itunes too

  • Unable to boot from ODD or USB after windows 8.1 update on P850-31L

    Hi
    I just updated a P850-31L to windows 8.1 from windows 8 through the windows store.
    Before the update I was able to boot from a USB drive by pressing F12 during start up.
    After the update I was no longer able to boot from the USB drive. Selecting the USB drive by changing the boot order in BIOS setup via F2 or by pressing F12 no longer works.
    Booting from ODD is also no longer possible.
    The BIOS version is 6.70 and does not allow secure boot to be disabled. However the DVD and the USB stick I tried are signed Ubuntu 12.10 which worked prior to the upgrade. Fastboot in windows 8.1 is disabled.
    This would then appear to be a bug in the Toshiba BIOS? Or has the windows 8.1 updated the BIOS or the EFI boot partition in such a way as to override the BIOS setting? Really stuck here, doesn't seem to be much information about.
    Any thoughts or assistance would be very much appreciated!
    Thanks
    Michael
    Update: I just tried booting from the Toshiba windows 8 recovery DVD and this no longer works either.
    Message was edited by: michael_toshiba_forum

    OK I fixed this.
    Firstly it's worth noting that it is possible to to disable secure boot in the 6.70 BIOS.
    However this option is only available when the user password is not set in the security menu.
    After enabling or disabling the password a reboot is required to make the secure boot enable/disable option either available or unavailable.
    That's good I suppose as I guess it may prevent secure boot from being disabled when the machine is running. However this does not appear to have been related to this issue.
    I selected the 'reset to factory defaults' option on the exit menu.
    The machine was then able to boot from USB and DVD. The boot order was also respected.
    Perhaps the windows 8.1 upgrade somehow invisibly corrupted the BIOS settings. Or maybe it was just a stranage co-incidence that the BIOS corrupted itself during the install. Either way that factory reset fixed it.

  • Configuration Manager 2012 SP1 for Windows XP\Win 7\Win 8\Win 8.1 to Windows 8.1 Update 1

    Hi Team,
    We have Configuration manager 2012 SP1 and we have requirement to migrate winXP\Win7\Win8\Win8 systems to Windows 8.1 update 1. We are looking for supporting replace, refresh and baremetal OS deployments. Can anyone give some pointers for things we need
    to take care while planning approach for migrations. OS image for windows 8.1 update 1 are created through MDT 2013 and we are planning to use Config manager 2012 SP1 for deploying these images with above scenarios.
    Regards,

    More info:
    Operating System Deployment in Configuration Manager
    http://technet.microsoft.com/en-us/library/gg682018.aspx
    OSD in System Center 2012 Configuration Manager
    http://www.microsoft.com/en-us/download/details.aspx?id=42959
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • PlayReady failure with specific OS version of Windows 8.1 Update

    Hello,
    I'm observing a failure in my app during Smooth Streaming video playback using PlayReady DRM. The app is a WinJS Universal App solution for Windows Store and Windows Phone, using the latest updates for Visual Studio 2013, Update 4.
    So far, the failure is limited to one specific version of the Windows 8.1 Update. I have two identical devices, both retail versions of the phone, that demonstrate this issue. Note, these same phones that fail with PlayReady can successfully
    stream unprotected Smooth Streaming content.
    My other five Windows Phone devices, with different OS version numbers, do not demonstrate the failure with the identical app installed. Therefore, I suspect the OS version may be the cause.
    Failure description:
    When I attempt to stream PlayReady protected Smooth Streaming video, the player initializes the media player and the MediaProtectionManager, but then displays the error state (The video failed to play. Try again.) immediately, and the following message is
    displayed in Visual Studio:
    MEDIA12899: AUDIO/VIDEO: Unknown MIME type.
    --- Message: MEDIA_ERR_SRC_NOT_SUPPORTED (0x887A0004)
    Summary of tested OS versions:
    Windows Phone 8.1 Update
    8.10.14141.167, untested
    8.10.14147.180, untested
    8.10.14157.200, untested
    8.10.14176.243, NOKIA Lumia 830, fails to stream, tested with two devices
    8.10.14192.280, untested
    8.10.14203.206, HTC HTC6995LVW, streams successfully
    8.10.14219.341, NOKIA Lumia 920, streams successfully
    8.10.14226.359, BLU WIN HD W510u, streams successfully
    Windows Phone 8.1
    8.10.12359.845, untested
    8.10.12382.878, untested
    8.10.12393.890, NOKIA Lumia 920, streams successfully
    8.10.12397.895, untested
    8.10.12400.899, NOKIA Lumia 530, streams successfully
    Note, one of OS versions I've tested fails to stream the PlayReady protected Smooth Streaming content, and five other OS versions I've tested successfully stream the same video content.
    Is this a known issue with a specific version(s) of Windows Phone 8.1?
    Regards,
    Andrew

    Hello,
    0x887A0004 equates to DXGI_ERROR_UNSUPPORTED. This error is usually generated when you are trying to use Direct3D features that are not supported. Different devices support different D3D features since they contain different video hardware. It is possible
    that a hardware feature that is required by the license is not supported in the hardware / driver of the device. I would recommend that you check the license and make sure that it does not contain any hardware specific requirements such as HDCP.
    In other words try playing content with the least restrictive license and see if it works for you.
    I hope this helps,
    James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/

Maybe you are looking for

  • RFC - XI - JDBC - cannot insert in Table !

    Hi Experts... I have a scene RFC - XI - JDBC ! When executing the application in the SXMB_MONI my status is processed successfully! But cannot insert the data in SQLServer Tables ! Im Message Monitoring i have the erros: Error No "action" attribute f

  • Changes to a scanned document

    How do I make changes or fill in blanks on a scanned document?

  • Order of fields in Primary key in where clause

    Hello, Does order of fields(complete primary key) in where condition matters with the performance or using of index ? Here is an example - BKPF has primary key - bukrs, gjahr, belnr. 1. select single awkey into lv_awkey   from bkpf where bukrs = p_bu

  • N70 firmware 5.0638.3.0.1 for o2 mobile

    Hi, i've a strange problem. I cant't update firmware in my O2 mobile - i've sw v3.0546.2.3. When i try update it with updater form nokia site it tells that there is no never version for my phone and i can only reinstall old firmware. Is it possible t

  • Now the PC says to enter Password to connect to MAC000D9... but when ...?

    When I enter the user name and password I get Log On Failure: Unknown user name or bad pass word. I will double check the User names and Passwords for the mac. But it still feels like I'm chasing a ghost. 2b PS The PC still Hasn't shown up in the Mac