--- Windows 8.1 update - information page -- -- -- IMPORTANT ! -- --

For all who update the system from Win 8 to Win 8.1. I found very interesting and useful information on Toshiba EU support page:
I recommend checking this Toshiba Update to Windows 8.1 information page:
[Update to Windows 8.1|http://www.toshiba.eu/innovation/generic/windows8_1-message/]
This page contains the [+Step-by-Step Update Instruction to Windows 8.1+|http://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/] and [+Step-by-Step Instructions Clean Installation+|http://www.toshiba.eu/innovation/generic/windows8_1-install-stepbystep/]
If you are not sure if your notebook will get Windows 8.1 drivers, you should check the information on the [+WINDOWS 8.1 UPDATE - SUPPORTED MODELS+|http://www.toshiba.eu/innovation/jsp/checkWindows8_1Compatible.do?service=EU] PAGE

Hey Francesco thanks a lot. I want to upgrade my Satellite U940. I hope everything will be OK.

Similar Messages

  • In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

    In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

    Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
    Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
    Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

  • Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

    Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • How do you download free software and updates without a credit card? I'm unable to by-pass the credit card information page..

    How do you download free software and updates without a credit card? I'm unable to by-pass the credit card information page..

    This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
    https://discussions.apple.com/message/24907941

  • When troubleshooting information page appears there is no confirmation window that says "Restart Firefox"

    your information page shows a confirmation window "Reset Firefox to its default state" no such window appears when I go to the Troubleshooting information, only a long list of details.

    Firefox 10.0.2 doesn't have a Reset button on the "Help > Troubleshooting Information" page.
    Any special reason why you use such an old Firefox version?
    What kind of issues do you have?

  • Any updated information on HP Sprout and Compatibility with Windows 10

    It has been sometime since the original post on this issue.  Does anyone have any updated information on any compatibility issues occurring when you install Windows 10 into Sprout?  MsArleen

    It is all now working. I had to download the new HP Support Assistant 8 from the website and reboot. It then found the Sprout Workspace Update and again I had to reboot.(But now there were no lights AND there were no error messages). Then I found a further hardware diagnostics download on the website, And now my Sprout works again. Come on, HP, would those instructions have been so hard to simply post on the forum?Why the treasure hunt?

  • Windows 10 Preview MDM Changes, Updates information

    How would I get latest changes/update information about MDM for Windows 10 Preview / Windows 10 Phone Preview ?
    Could you point out any document url ?
    I would like to know which MDM protocol specification should we follow for Windows 10 Preview / Windows 10 Phone Preview MDM ? Windows 8.1 Enterprise MDM spec. or Windows Phone 8.1 MDM spec.?

    We do not have Windows 10 MDM documentation ready yet. We will post it in this forum as soon as it is available. I would suggest testing your existing MDM server using the Windows 10 technical preview. Please note that it is still preview and not features
    are available yet.
    http://windows.microsoft.com/en-us/windows/preview-iso
    -Rashmi.

  • Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

    I cannot download as I keep getting this when I try
    Windows has the following information about this file type. This page will help you find software needed to open your file.
    File Type: Firefox Browser Extension
    File Extension: .xpi
    Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
    Please advise how I go about downloading

    despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
    does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
    i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

  • Window 8 and Windows 8.1 Upgrade Information and Windows 8 Tips

    Need a tip on "how-to" do something in Windows 8 then the below links might provide the information that you need.
    Microsoft Windows 8 upgrade assistant and FAQs.
    HP Windows 8 Upgrade - Important Information Before You Upgrade.
    HP Windows 7 to Windows 8 conversion information for Notebooks.
    Test my HP PC for Windows 8 Compatibility.
    Windows 8 – Tutorial Index and Windows 8 Tips
    Windows 8 Apps more Windows 8 Apps
    Windows 8 System Requirements
    Additionally, if you Google "Windows 8 tips", you will find many excellent articles posted on the internet.
    Windows 8.1 upgrade suggestions:
    There are some important steps to take prior to doing the upgrade.  Review this MS posted document. Be sure to run the upgrade assistant.
    Be sure that Windows 8 has all of the latest MS updates installed. There are prerequisite patches that are required.
    Be sure that you have at least 40 GB of hard disk free space.
    Back up your data to external media.
    Make a Windows 8 recovery media to external media before doing the upgrade.  I prefer to use a third party hard drive imaging program.
    Temporarily disable the antivirus software.
    You will need to reinstall your programs after the upgrade so make note of which ones are required.
    Check the HP Support site for Window 8.1 updates for your particular PC.  If you don't see any updates then your PC has not been tested/certified with Windows 8.1.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

    I've been running 64-bit Windows 8 Consumer Preview very nicely for several months and want to upgrade to 64-bit Windows Pro on my Pavilion a1440n. When I've tried to install from within the OS I get weird messages indicating that it can't be installed on a USB Flash drive (which I'm not trying to do). When I tried doing a clean install I got an odd message saying that certain installer files were missing and it would not complete. I called Microsoft customer support and the agent there thought my cpu would work because it wouldn't support Hyper-V, even though I understand that it optional. From running coreinfo.exe I can see that I have the PAE, NX, and SSE2 on the cpu enabled as meets requirements.
    When I ran through th HP site I saw that this machine has not been tested. Is there any way of getting confirmation that Windows 8 Pro 64-bit will or won't run on my machine? The HP Product code for it is ER904AA#ABA.
    Thanks!

  • Windows 8 critical update crashed lost browser and all history and tabs how do i get old browser

    Install Windows 8 Critical update; computer crashed and lost everything; Microsoft OS will not let me back into programs, keeps blocking me and gives me a temp password so I can still use PC. Had to reinstall FIREFOX, can't recover old browser and my very important tab. I can't get to backup file and Microsoft is unable to fix the problem, so I am starting from scratch. Tried to use Profile information but it contains only my current profile.
    Hope you can help.

    If you do not have the original profile folder and its contents, or some backup of that; there is not anything we can do to help.
    *Do you have any forms of backup at all ?
    *Did you sync with another device ?
    I am assuming the original hard drive has been reformatted, or is totally unusable.

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!

    I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!

    Try this. It worked for me.
    I discovered the same problem.  I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format.  Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story.  Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
    These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
    FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
    SECOND: move that file out of the trash and onto your desktop.  Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
    THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work.  iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app.  Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
    FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP."  ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
    FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself).  Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT:  iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
    Hope this helps. Good luck.

  • Firefox does not see my updated web page, but can see it using IE. Why?

    My web site is designed on Frontpage. I updated information of several pages. One page in particular does not show the updated information. http://www.dianedrain.com/RealProperty/TrusteeSalesForeclosures/TRUSTEEpendingTrusteeSales.htm
    Yet, IE does show the page with the updates. Why?

    Reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    See also http://kb.mozillazine.org/browser.cache.check_doc_frequency (1)

  • Updated Information Required for KB: 159865

    Dear "dedicated
    team for the development issues who will be able to assist you accordingly."
    Please assist RE: 
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/updated-information-required-for-kb-159865/e74cd617-49f7-4725-b0ac-3c1cc7cbc3f7
    Steve F

    Hi Kevin! I have been unable to reply on this forum for quite a while. Unfortunately, after being advised to delete and re-create my LIVE account, by a member of a Microsoft Support team, I tried replying, but received IIS errors, then the page simply wouldn't
    display the "reply box", no matter what browser or version!
    Beyond that, I don't have much of an update. I didn't think you were serious. What would you like me to check "%windir%\inf\setupapi.dev.log"
    for, specifically? I'm asking where to find a mapping, without even knowing how the mapping is done, or what it would be logged as, if it is logged at all! 
    Asking a vague question in response to a specific question, is by no means helpful. Again, I have various certifications from various companies as a Storage Administrator, Unfortunately, I have yet to get a certification of divination in regards to the source
    code of proprietary software.
    Someone who knows what the error message means in physical reality needs to explain it, because the message itself does not refer to physical reality in any coherent
    way. It seems to refer to an abstract identifier, although, that is of course, speculation at best.

  • Safari 5.1 (7534.50) [for Windows] is not updating read RSS item counts

    I've just upgraded to Safari 5.1 (7534.50) [for Windows].  I've noticed that the RSS new item indicator counts are not being decremented after I open the RSS page for that item.  Are others experiencing this problem?
    I went so far as to create a new addition of an RSS entry, it indicated unread items.  After visiting the RSS aggregator page the count does not go to zero as it has been prior to installing this new version.
    Any suggestions on what to look at to fix this, or is this truly a bug in this new version?
    Thanks.

    well - i serious does not understand why apple did this. RSS broken, removing single cookies is not longer possible - except you visit the page and go in developer window. these two functions are very important for me, and maybe for other devlopers too - anyway ... i love the safari, because it is one of the fastest and css conformest (:-) browser. but step back one version is NOT an option ! I don't see that these things coming back, or getting fixed in short way, steping back and stay on old browser is a no go for me (bugs, injections, bla)
    so i decide somedays ago to migrate anything to firefox 5. using tons of addons to bring back a bit confortability. i try meanwhile 4 external rss reader, and lol all what i have to say is - forgot all external rss readers - they are crap - do not waste time to find a replacement like safari. now i have firefox 5 with sage (this is not bad - some issues - but ok - updates only on click (bad) - and does not mark read after left (bad) - but in total better than a constant not updating counter), rightbar, adblock, status4ever, and much more. And it is ok ... i have a fast PC so idk speed at all :-) FF and Safari are different !! But after 3 days of usage the differences getting less and less. Well the point is - i browser websites - no matter what browser i really use ... (thinking like that makes easier for you to switch - haha - troll-my-self - but it works)
    PS: this is just my personally - that looks like it would fit for me - doesnt means it fits for you too

Maybe you are looking for

  • Need help in creating custom crosstab reports

    Hello I need some help in creating custom crosstab reports. My current report shows the number of events that have occured over the time in a day The events and the eventdetails are read from the database before being printed on the crosstab i.e some

  • Calling schema specific packe/function from PL/SQL

    From PL/SQL I am trying to call a package function in a specific schema (see below). When I try it gives me this error: Invalid function body condition: ORA-06550: line 3, column 15: PLS-00201: identifier 'SCHEMA1.SIS_EXPRESS' must be declared ORA-06

  • Odd behavior when duplicating pages

    I have run into some odd behavior when duplicating pages. First I spent many hours trying to acomplish a double trigger effect in which the last trigger opened a large image in a pop up window. Thanks to help from agm 123 and Sachin Hasija  see the p

  • Testworkbench Solution Manager 7.01 SPS26

    Hi everbody, first at all my best wishes and good luck to you all in 2012!! I hope there is someone who can help me. We made an update of SAP Solution Manager 7.01 from SPS 23 to SPS26 and I found out the new field "Test effort" in the Testworkbench.

  • Account statements with 30 days past due items for customer

    Hi Guys, My client wants to generate the account statements or  letters for customers whose open items are 30 days past due.I guess its related with dunning process not with generating regular statements using Tcode F.27. Could anyone please guide me