Windows 8.1 update problem on LENOVO Y510P

Hey guys, 
Can't find anything similar to my problem and exhausted my options on this, so decided to ask. If it has been answered I couldn't find, so please point me out on the right direction.
Back history:
Have a lenovo y510p
Bought caddy & SSD drive and installed it onto laptop
Couldn't find a good doc about how to proced so my idea was
1-restore factory settings,
2-Copied the Windows C: partition and the SYSTEM_DRV partition to the SSD using Macrium reflect
3-Went on the BIOS boot order and set the SSD to boot first.
4-Voila, works fine, boots C: on the SSD and it's super fast.
Problem:
Windows 8.1 update can't install on C:. Bummer
I receive a notification saying that I can update to windows 8.1, which I want to do.
1 Hit ok to download,
2 it starts the update process,
3 finishes installing,
4 says it needs to restart
5-RESTARTS TO THE OLD DRIVE, changing the boot order on the BIOS (**bleep**???)
I then check that nothing was installed even on the old drive, proceed to shut down computer, change boot order back to SSD drive, start windows and receive a message that it couldn't be installed and it has reverted the installation.
Has anyone ever experienced that?
My idea now is to 
Back up my computer again
Restore factory settings (on old drive)
Install windows 8.1 to old drive
Clone windows partition over 
Change BIOS to boot up on SSD.
HOWEVER my question is: What happens when I want to install Windows 10 ? Do you think I'll face the same issue? 
Should I somehow format the old drive's windows partition to prevent this from happening ? 
Any help is welcome and I thank you all in advance,
Cheers

Did you erase the recovery partition on the old drive? My best guess is to create recovery discs or thumbdrive take the old drive out and put the new drive in and use the discs or thumbdrive to restore the system. Then run the updates and then copy your personal information from the old disc to the new disc.
As for Windows 10, I do not know if they are going to be doing a clean install with the update to windows 10 or doing an in place update so it is hard to know what problems you will encounter.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Similar Messages

  • Y560 Windows 8.1 update problem

    Hi guys.I hava an issue with Windows 8.1 update.I know Lenovo does not support Windows 8 and Windows 8.1 on Y560 but i have used Windows 8.1 for 2+ years.Sometimes ago i had to format my pc.I installed Windows 8.1 without problem but when i try to install 8.1 update  it fails and reverts to Windows 8 and gives 0xc1900101 - 0x30018 error code.I think it's driver issue but i cant find which one.Please help me

    hi alidogan,
    Welcome to the Forums.
    Can you try the following:
    1. Follow this guide on how to perform a clean boot
    2. Temporarily disable your antivirus software and install Windows 8.1 Update (KB291935)
    Note:
    Ensure you install KB2919442 first as this is a prerequisite for the Windows 8.1 Update (KB291935).
    More info:
    https://support.microsoft.com/en-us/kb/2919355
    Let me know how it goes.
    Regards

  • Windows 8.1 update problem

     I tryed to restore my computer (HP Spectre XT 15-4010nr) to certain date and I got a blank screen, I didn't know what to do so I used the recovery media, know I can't install windows 8.1 in the machine, I did all the updates from windows an the HP website before trying the windows 8.1 update, I got the message telling me windows couldn't be updated and a code 0x01900101 - 0x40019. Yesterday HP Support Assistant asked me to update “CyberLink PowerDVD 10” I did it, but I got a blank screen again and at the end a message saying that the update to windows 8.1 couldn't be done. So it seems that now a can't even do the regular updates. Any help will really be appreciated.

    Hi,
    It's confused about your issue. Was your current operating system is Windows 8.1? Did you install the update for the Windows store app? Do you remember which update?
    If yes, please view if this update installed successfully:
    1. Click WIN + X, select "Event Viewer";
    2. Click "Windows Log" in the right navigation;
    3. Click "System", choose that the category of the "Source"  is "WindowsUpdateClient" log, view if any clue.
    If my understanding is incorrect, please correct me. 
    Karen Hu
    TechNet Community Support

  • N78 Window Transition and Update Problem

    Hello!
    I finally updated the firmware of my N78. However, I noticed that not all features are functioning well. One would be the volume control. Before, I use the upper side buttons to control it when my phones either on standby, using the radio or using realplayer. And, the transition from the portrait mode (phone's normal mode) to landscape mode (mode for viewing pictures, videos, and when using the camera) is gone. Before, the screen rotates. Now, when i press my camera button, my phone goes to camera mode but the screen does not rotate.it only fades with some nasty random lines transition. actually i dont call that a transition. the same goes when i view my pictures and my videos. there is no window transition. is there a problem in my phone. what should i do?
    (^_^)
    (T_T)
    Solved!
    Go to Solution.

    Hi,
    thank you for replying mark_kehl!!! it seems that your solution worked. however, i still have other problems like the volume control button. sometimes, my phone suddenly halts when i am using music player. hmmmm... i believe that my phone is really defective. Nokia has already advised me to return this phone to the store where i bought it but... unfortunately, i dont have time. i am traveling very often and there are more important business to attend to than returning my defective phone.isnt it that nokia should really check its products before being they are put to the market. i am really bothered about this. i mean, as far as i know, nokia has the largest market share when it comes to mobile phones and related electronics... but i'm sure... because of these minor imperfections... its fellow competitors in the market will grab those unsatisfied costumers. anyway, its not my concern. i'm planning to sell my phone next year and probably, i'll buy an LG, Samsung or Sony-Ericson phone. it seems that i overestimated nokia. i committed a fallacy: argumentum ad populum... hahahahaha.
    oh... it seems it is time for me to travel again...
    thanks again for your reply... merry christmas!!! have a bountiful new year!!!
    (^_^)
    (T_T)

  • Windows 8.1 update crashes my Lenovo Yoga13

    After updating to Windows 8.1, my PC is unable to restart with the following message displayed:
    1) Preparing automatic repair
    2) Diagnosing your PC
    3) Your PC did not start correctly
    Here I am given 2 options:
    a) Restart
    b) Advanced Options.
    Option (a) will keep me in the same loop. I have tried most of the options in (b) but nothing works out. The only extra clue I got is when I go to Startup Settings and select option 9)" Disable automatic restart after failure" from which an additional message was displayed:
    error: INACCESSIBLE_BOOT_DEVICE
    Pleasessss helpppp coz I can't even access to the safe mode. 

    Is there any other options other than going thru the system recovery? I do not want to lose any files I had saved nor do I know how to do a data backup at this critical stage.

  • Lenovo y510p DVD burner problems

    HI
    I have problem with Lenovo y510p DVD, it does not read blank DVDs.
    I have tried difeerent kind but it just stopped to read them, I just hear sound form dvd tray and that is it.
    I see that I have: mat**bleep**a dvd ram uj8db
    Is there a firmware update or something for it?
    thanks

    Dear Mehnihma
    Welcome in lenovo community
    If this is the first time to face the issue as it was working before so the System restore will be the best solution .
    Restore your system to the nearest restore point when the machine was working fine before 
    Let me know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows 8.1 Update Carnage

    Not sure where to start.
    HELP!
    Just about every Windows 8.1 Update problem I have seen on the net in the last few weeks has hit my innocent little computer.
    It is 10 months old, pre-installed with a legitimate copy of Windows 8. The update via the store last year was ok, but this recent monstrosity, (windows Update set to automatic install), has: 1)Intermittently trashed my internet connection, 2)added
    a very fetching 'Build 9600' tag to my screen, 3)disabled windows update, 4)put 'sfc /scannow' into a useless death spiral, 5)constantly nags me to activate it (all methods to do so fail miserably). There is more, but I can feel another headache coming on.
    So, having taken two perfectly good XP computers offline, because they will no longer be updated, I am now left with a virtually new machine which is even more unsafe.
    My question is this: If I start the on-board Lenovo restore process to re-build the original Windows 8 installation, will the fact that 8.1 has changed the operating system identity in the BIOS prevent me getting back to a stable windows
    8 setup?
    Don't forget, the Windows 8 was pre-installed - I don't have any discs. After weeks of trawling through contradictory garbage and guesswork on the forums, I am convinced that every turn of this Catch 22 maze leads
    to a dead end. The most malevolent malware writers could not have compromised my machine any better.  
    The question I keep asking myself is: I own 2 iPods, an iPhone and an iPad, what should my next desktop be?

    Hi,
    You can restore the Windows system if you already had a backup of your computer with the built in tool by the OEM manufacture.
    If not, you have to contact the OEM vendor where you purchased the computer to get a recovery disk to repair the system.
    Alex Zhao
    TechNet Community Support

  • Windows 8.1 - Update consideration, resources, and known issues

     
    This community KB article is being consolidated to help Lenovo customers who are early adopters of the Windows 8.1 update.  This article will be frequently updated to include information on recommendation on issues that have been reported and are currently being addressed by Lenovo product teams.   It is recommended that a backup of all data be made prior to starting the Windows 8.1 update.
    Official Lenovo Windows 8 and 8.1 Support resources - list of officially supported systems, information on license keys, activation, upgrade / downgrade rights and more.  
    Update Drivers before upgrading to Windows 8.1. At this time Lenovo recommends that customers who are planning to install the Windows 8.1 update, first update to the latest version of device drivers and BIOS on the Lenovo support site and apply Windows updates.   Lenovo customers who are using ThinkPad, ThinkStation, ThinkCentre systems may elect to use the System Update to accomplish the Lenovo driver updates before updating to Windows 8.1.  System update 5.03 should be used.  If system update is downlevel, it should first update itself to version 5.03.  Windows 8.1 drivers are being packaged and made available for automated install through System Update; therefore initially a limited number of 8.1 updates may be reported through System update.   Updated drivers can still be installed manually by downloading from the support site.  Lenovo is currently working on the release and availability of Windows 8.1 drivers through system update.   
    Not finding 8.1 drivers for officially supported models on the Lenovo support site?  The driver list for some systems ( Helix for example) currently reflect a mix of drivers for Windows 8 and Windows 8.1.  The Windows 8 drivers should work and have been tested, and compatibility designations are being revised to clearly reflect compatibility with Windows 8.1.  This updating of descriptions is expected to complete in early November
    SOLVED -SecureBoot advisory message appears in lower right corner of the screen after updating to Windows 8.1.  This appears to occur if SecureBoot was not enabled when the update was installed.  This community article may help resolve the issue. Microsoft has released an official solution here
    Windows 8.1 update is not listed in the Microsoft Store.   There are certain prerequisites that must be installed before the Windows 8.1 update will be installed.   Be sure to run Windows update and install all updates.  Reboot according to instructions, then re-launch the Windows Store and select Microsoft Windows 8.1 update.  For additional information on updating from the Microsoft Windows 8.1 preview to Windows 8.1 click here.  If the Windows 8.1 update is still not available, please visit support.microsoft.com
    Windows 8.1 update fails with an error code. Try to refresh and ensure all Windows updates have been applied.  If a backup of all data has already been made, customers may elect to reset back to factory, perform all Windows updates, update Lenovo drivers, and then attempt the Windows 8.1 update again.  Please note: Reset back to factory will wipe out all data.
    SOLVED - Black Screen with flashing pointer after install on some hybrid graphics equipped  systems , S440/540, T430/530    W530 could potentially be affected.   This issue has been addressed and Windows 8.1 updates on these models conducted after 10/29/13 should proceed normally.  A Lenovo support tip for S series has been released to assist any previously affected customers. Another tip for T430/530 and W530 series is available,  too.

    I have a z580 Ideapad that came with Windows 8.0. Some materials on the Lenovo site indicate that this laptop should not be updated to Windows 8.1 due to provides with the video driver, other materials indicate that it is OK. Has the video driver issue been resolved? Are there other Windows 8.1 upgrade issues? Maybe I should avoid problems and just stay with WIndows 8.0.

  • Lenovo y510p audio problem on Windows 10 x64

    Hi i am using lenovo y510p and i having some problem.After installing Windows 10 x64 I can`t use the 5.1 speakers connected via optics. At sound check box gives "Failed to play test sound"/
    To solve these problem I tried:
    1. Reinstalt drivers Realtek (tried as a version from official Lenovo suport and the latest version from Realtek);
    2.Plug and unplug optics (Realtek Didgital Output) in "Sound";
    3.Restart the Windows Audio  service.4. Reinstalt chipset and audio drivers.
    Now the external speakers working in stereo .

    The drivers listed for under Y510p was not the lastest for our audio hardware, hence why I gave you a link to (what I think) is the latest version. Those should have no problem working under Win 10 (and maybe Win 8.1).
    Y510p has a "weak" audio chipset in the sense that it isn't handled well by the drivers providided on Realtek's homepage.

  • Thinkpad Yoga BIOS Update Problem after installing Windows 10

    Hi all, I've been reading tonnes of threads here trying to solve my problems (which seem to keep getting worse) to no avail. I'm reaching out to anyone that can suggest some help before I end up bricking my yoga by accident or running it over on purpose. I'll give you a timeline of the events. The machine in question is a Lenovo Thinkpad Yoga 12.5" 20CD-0032USIntel Core i5 4200U 1.60GHz Processor4GB Ram128GB SSDWindows 8.1 64 Bit preloaded (recently upgraded to Windows 10) So the saga begun just a short two days ago. I had some spare time at home and decided to download and install my free upgrade to Windows 10. I backed up all of my important documents etc to OneDrive as I intended on performing a clean install. Said clean install went flawlessly with Windows 10 installing the first time with no issues or errors. Since I had performed a clean install, all my previous apps, including the stock Lenovo apps, had been deleted. I had anticipated this and only really desired to reinstall the app that automatically adjusts the screen orientation when folding the cover back. So in an effort to find this app and any Windows 10 related updates that may be available I went to support.lenovo.com and used the handy Lenovo Bridge app to automatically detect my hardware and suggest relevant updates. While combing through the suggested software I noticed a BIOS update that noted added support for Windows 10. How great, I thought, that Lenovo would have a BIOS update ready so quickly once 10 became ready for mass consumption. I went ahead and downloaded the exe version (not the bootable CD due to the lack of CD drive on the Yoga) and ran the BIOS update. As I ran the update the laptop was plugged in, and no errors were presented, a success message appeared and indicated a reboot was necessary, after a couple seconds the system rebooted itself. Enter nightmare level 1. As soon as the system rebooted, I fired up IE about to look for more updates and......BSOD stating that there was and issue with a driver, after another reboot BSOD again with a completely different file name stating driver file missing or corrupt. Sorry I didn't write any of the file names or errors down. At this point I'm thinking that something is not jiving here between the BIOS and OS. So I tried running repair, and recovery and each time I would end up with a BSOD of some design. It was at this point I made a USB with the Windows 10 x64 ISO from Microsoft in an attempt to run the repair utilities from the USB. Again to no avail. Enter nightmare level 2 After attempting multiple tries at recovering Windows 10 and getting multiple BSOD's through the process I decided to use my Windows 10 USB to simply reformat my hard drive to eliminate any traces of my now apparently corrupt OS and do a fresh install of Windows 10. This appears to have been a significant error on my part. Now I have no OS (BIOS is still intact so at least I think I have a not-bricked motherboard) and everytime I try to boot Windows 10, or 8.1 for that matter, from a brand new USB stick I get constant BSOD's.Sometimes I get as far as the Preparing installation files 22% but am interrupted by a BSOD error at some point. So I am pleading for some help here. To me it seems like the BIOS update was the issue. I was not smart enough to have checked the BIOS version before updating so that I would know what to roll back to safely. What would you all recommend for a rollback and how do I go about doing one with no OS on the machine. I know I'm asking for a tl;dr here but appreciate any advice offered. I really dont want to get to nightmare level 3, which I guess would be a bricked laptop and a bill for a new motherboard or laptop. The BIOS I currently have is GQET45WW (1.25) -Garrett  

    Thanks for the reply ColonelONeill, It turns out that Lenovo uses an obscure PERL disk image called "eltorito". As such the directions in the link you provided did not work as most common tools (WinZip, 7zip, and WinRAR) cannot extract the image file from an eltorito iso file.  I instead just bucked up for a $50.00 Asus USB CD drive and burned the iso for version 1.25 and 1.24 onto discs. I then disabled the setting in the BIOS that prevents rolling back to a previous version and flashed to 1.24 from the disc. While this appeared to go successfully, as soon as I tried to boot from my Windows 8.1 CD I start receiving BSOD's again during installation. I then used the CD with 1.25 to go back to where I was in case it was simply a bad BIOS update at the time. Most of the BSOD's are driver related (qlfcoei.sys) which I don't understand since there is no OS other than what is on the bootable CD (or USB I've tried both) Is there anyone with a stable install of Win 8.1 x64 or 10 x64 running on a 20CD0032US that can tell me what version of BIOS they are running? My next step is to go back to a version that someone else can verify is working. Thanks again for any help.

  • After Update to windows 8.1 update 1 going to problem ? help me ?

    Hi there dev
    I installed windows 8.1 on my hardware and enabled hyper-v and installed 8.1 on hyper-v
    after I update both windows to 8.1 update 1 my virtual windows 8.1 going to this problem :
    now my right click ( context menu ) works on desktop but can't work in the start screen any more 
    I don't have :
    1-pin to star or unpin from start
    2-pin to taskbar or unpin from taskbar
    3-uninstall
    4-resize
    no one of these context menu works in my start screen in my virtual windows 8.1 update 1
    but all of them work completely in my host windows 8.1 update 1
    help me how to resolve this problem
    NOTE : The Generation of virtual windows 8.1 update 1 is Generation 2 while I created it in the Specify Generation page .
    great thanks
    Regards :
    Raha
    whit the best regard : Raha

    puedes optar por aplicar los parches de manera manual
    http://blogs.itpro.es/octaviordz/2014/05/05/nuevo-parche-para-el-update-de-windows-8-1-kb2919355/
    http://blogs.itpro.es/octaviordz/2014/04/11/inyectar-los-paquetes-de-actualizacion-msu-de-manera-offline-en-windows-8-1/
    http://blogs.itpro.es/octaviordz/2014/04/10/windows-8-1-update-disponible/
    http://blogs.itpro.es/octaviordz/2014/04/05/actualizar-de-windows-8-1-2012r2-a-windows-8-1-ws2012r2-update-con-script-de-powershell/
    Freelance-IT http://www.freelance-it.com.mx

  • Problem with iPhone 6 driver on Windows 8.1 Update

    Hi guys,
    Each new device brings new questions: in my case, it's about Windows 8.1 Update (64-bit) not being able to install the proper driver for my new iPhone 6.
    Strangely, I don't have any problem syncing my phone with iTunes via USB, but that won't work over WiFi, and when I plug it into one of the PC's USB ports, I get this window stating that Windows is trying to install the proper driver, but it hangs, then fails.
    Of course, the phone shows in Windows Explorer, but when I double-click on the icon, it shows as empty.
    Have you guys experienced the same thing?

    Hey Jeff,
    Now that you mention it, I may have botched the job when I reinstalled iTunes on that PC: I don't remember allowing the install of the Apple Mobile Device Support...
    I'll give it a go and holler if things go South...

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • After Windows 8.1 update Lenovo L420 has half the WLAN speed

    After the Windows 8.1 update my L420 WLan only works with 55 MBit max. In Windows 8.0 it was between 120 and 150 Mbit. I have the 1x1 11b/g/n W-LAN-PCI-Express-Half-Mini-Card-Adapter. Lenovo L420 is 7854-4LG.
    The WLAN driver is a Microsoft driver as in Windows 8 but a newer version.
    How can I get the Windows 8 driver back?
    Why doesn't provide Lenovo a driver as with Windows 7?
    Is Lenovo not testing any of their Laptops for compatibility?
    Any help?
    Michael
    Solved!
    Go to Solution.

    I found a solution in the meantime: I loaded  the driver for the RTL8188CE chipset from the REALTEK site.
    Now I'm back between 120 and 150 MBit.
    Michael

  • Desktop H430 - update problems - how to update Windows 8.1 ?

    I have Desktop H430.
    I try to update 8.1
    But I cannot find update link at metro store nor metro window update. 
    even metro store keep close down now.
    and cannot update Windows8-RT-KB2871777, Windows8-RT-KB287138​9
    help me.

    Hi Delightahn,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that the upgrading process to Windows 8.1 is not working as expected. Below is the links with steps and information to upgrade the OS (Operating System):
    Windows 8.1 - Update consideration & Resources
    Update to Windows 8.1 from Windows 8
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • File does not begin with '%Pdf-' in Persona to take a Print

    Dear all, What would be the reason for the error " File does not begin with '%Pdf-' when its trying to open in adobe reader in Persona. Does persona support any KMC content management ? please resolve this error. Find the attached screenshot. And we

  • Latest Update will not install

    The latest update of Itunes will not install. When I go to install, I get the message that the installer encountered errors before Itunes could be configured. I have tried everything at http://support.apple.com/kb/HT1926 and non of these have helped.

  • Flash Professional CC crashes when saving, corrupting files

    My company upgraded from flash CS5 to Flash Professional CC just recently, and i was hoping for a more stable experience, as Crashes when saving from Flash CS5 happened allmost daily. Seem i was wrong, occasionally when saving Flash CC crashes, and e

  • Proxy (WithAcknowledgements) to Mail Scenario

    Hi, I am doing Proxy to mail Scenario ..and trying to send the Proxy with Attachments. After executing ClientProxy when i check in PI moni_sxmb.. i got error regarding HTTP... Can anyone tell me where i have to check regarding this .. The error in th

  • Bounding box, paths and control points are not visible

    When I select an element, in this case a building, to make changes, the entire file is selected instead of the building. There is nothing to ungroup when this happens. Can someone tell me how to fix this? Thanks