Windows 8.1 update via Intune software deployment

Hi Forum
Is it possible to push or make available the Windows 8.1 update via Windows Intune software deployment?
This is for laptops.
Thanks in advance
NN

Yes it will be, but not yet. See http://social.technet.microsoft.com/Forums/en-US/79d259ff-47ff-4728-8ee9-28a5e06e5ba5/i-dont-see-httpsupportmicrosoftcomkb2919355-within-updates-for-windows-intune-is-it-out-of?forum=windowsintuneprod
Jason | http://blog.configmgrftw.com

Similar Messages

Uninstall Windows Security Update via Intune

Hi all
Some of our users are using Propalms-software which has reported a problem with Microsoft Windows update KB2830477.
This update was installed by Intune. Is it possible to uninstall this update via Intune?
Thx!
Dany

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support if the issue still exists.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

P35 platinum combo will not boot windows after bios update via Live Update

Hi,
I had everything running on windows 7 fine until 2 days ago. I installed Live Update from MSI website. I was about to install driver updates for my motherboard, but the bios update went instead. my pc tried to restart after the bios update installed, but it failed. would not post and would only see black screen.
then i removed one of my memory sticks. it would post, but then windows would not start up. it would get stuck at windows loading screen. i tried to reformat with my windows cd. but during install it would blue screen of death me. i tried multiple times and it would always blue screen of death with different errors. the last one i remember was a message saying i should off turn shadowing and caching.
this all started happening after i attempted bios update via Live Update.
Any help is greatly appreciated.
I have a core2quad 9450
this motherboard
MSI P35 Platinum Combo LGA 775 Intel P35 ATX Intel Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130141
this ram
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory Model F2-8000CL5D-4GBPQ
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231145
this harddrive
Mushkin Enhanced Chronos MKNSSDCR120GB 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD)
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226236
this video card
XFX PVT88PYSF4 GeForce 8800 GT 512MB
http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280
Thanks!!!

at a guess you need to reset bios to ahci
a bios flash defaults to ide mode

Windows 8.1 Update 1 for Enterprise

I got the license for Windows 8.1 from my MSDN subscription which is not affiliated with an IT Department as I got the subscription through being a student partner. Hence, today when I tried to update to Windows 8.1 Update 1, I could not find the
update in the Update or Store. Does anyone know how I can resolve this issue for my particular case?
Kind regards,
Oscar

Hi,
Can you get Windows 8.1 Update via following path?
Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 Update April, 2014
http://support.microsoft.com/kb/2919355/en-us
Windows 8.1 Update (KB2919355)
http://www.microsoft.com/en-us/download/details.aspx?id=42327&WT.mc_id=rss_security_updates
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Trouble Deploying Windows updates via SCCM 2012

Hello
I'm testing Windows updates via SCCM 2012 - I have successfully deployed updates to 4 test PC's.
I then added another 15 Test PC's into the same group - Not one of them receive updates (they're all within the same Domain and even in the same room)
I reviewed "UpdatesDeployment.log -
1. I highlighted some points that stood out to me
2. I have the Maintenance window set to 24hours for this test
From the Server side and Clients side - What are the best .logs to look at.
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Suspend activity in presentation mode is selected   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Proceeding to non-business hours activites as presentation mode is off.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Attempting to install 0 updates   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
No actionable updates for install task. No attempt required.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)
Updates could not be installed at this time. Waiting for the next maintenance window.   UpdatesDeploymentAgent   22/08/2014 10:00:00 PM   4604 (0x11FC)

Hi,
You could also check Windowsupdate.log on the client.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 Hybrid Boot and Software Updates through ConfigMgr

Hello,
I've never posted here before because I usually get all my answers from a search. But this issue I'm finding very little information about throughout the web.
In my organization we have ConfigMgr deploying monthly software updates, usually just Security Updates, to our Windows 8.1 estate. We have a standard 8.1 build on our machines, nothing too custom. We have left the Hybrid Boot feature left on.
However, when deploying software updates through ConfigMgr we're seeing reboot after reboot to complete. In some cases up to 5 restarts and so we have had to disable all reboots and reboot notifications. Disabling Hybrid Boot allows all updates
to install after just 1 restart. So from what I understand, a full shut down is required to apply software updates. Can anyone tell me whether Windows 8.1 should be aware of updates it is applying and switch to a full shut down when Hybrid Boot
is enabled?
I know this is very much a Windows 8.1 issue, however I'm interested to know whether other people deploying software updates via ConfigMgr have experienced this issue in their environments.
Thanks for any advice.

Hi,
Please check the article below first. It indicates the restart process in Windows 8 continues to perform a full boot cycle, without the Hibernation performance improvement .
Quote:
What About Restart?
When you restart the computer, that typically means that you want a completely new Windows state, either because you have
installed a driver or replaced Windows elements that cannot be replaced without a full restart.
As a result, the restart process in Windows 8 continues to perform a full boot cycle, without the Hibernation performance improvement mentioned above.
Windows 8: Fast Boot
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I have got my iPhone 5 and i have forgot my passcode i have tried to restore and update via my windows computer and it still says sorry this iphone has a password please enter it before you sync but i dont know it ? Please help what do i do????!!

I have got my iPhone 5 and i have forgot my passcode i have tried to restore and update via my windows computer and it still says sorry this iphone has a password please enter it before you sync but i dont know it ? Please help what do i do????!!

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

Deploying Windows 8.1 Update 1 - KB2919355

Hi, I know "Update 2" is available now (KB2975719), but I'm still testing it. But I want to push "Update 1" (KB2919355) to all my Windows 8.1 machines.
This wasn't a problem in the past, you just had to ensure the pre-req KB2919442 was installed, and that "Update 1" is given a sufficient "Maximum Run Time" (more than the default 10 mins).
Then another pre-req came along, KB2939057. But it was still offered to the machines, and installed fine.
Now I notice that Update 1 (KB2919355) is no longer being offered to most of my machines. Does anyone know why this is?
You can still download it manually and install it. Or you can run a Windows Update and install various "Critical Updates" for 8.1 (these updates are not visible in SCCM Software Updates), and that seems to make it available then.
Any ideas why most machines are not requesting Update 1, and can't get SCCM to push it to them?
Thanks.

"To deploy 2919355 and 2919442, you'll need to download them separately and deploy them using a package (or application). This comes down to Microsoft making it very clear that systems without 8.1 Update were no longer supported and thus you've left
yourself in an unsupported configuration by not updating the systems earlier."
Frankly I find this statement offensive. I just stood up a new SCCM server last month and began deploying fresh instances of Windows 8.1 RTM (what else can I deploy, there is no Windows 8.1 Update RTM). The fact is that, today, there is no straightforward
way to apply Windows 8.1 Update to a Windows 8.1 RTM using Microsoft's flagship deployment tool. This is clearly a bug and not a feature. You seem to be implying that I've done something wrong by "leaving myself in an unsupported configuration
by not updating the systems earlier." This is a fresh site and I never had that chance. There is one reasonable solution to this: Microsoft should fix the Windows 8.1 RTM/Update 1 deadlock.

Block Patch KB3002657 from installing/being available via Windows Update via Group Policy

Hi Everyone,
Been hearing a lot of issues around with KB3002657 causing Authentication issues. We've recently appeared to have similar issues. I'm currently getting out SCCM guru's to run
an inventory on our environment to review if we have had this deployed to our environment, either by Windows Update (manual), SCCM/Wsus etc. If we do we're looking to have this removed and not deployed via our normal mechanisms to stop any production outages.
I would like to see if it is possible to block/hide this update from being visible from Windows Update, possibly by Group Policy.
From memory Microsoft created specifc ADM templates for blocking updated for Internet Explorer version to assist with the same type of issues (i.e. to stop IE from being updated
via Automatic Updates). Would there by anything like this available for this update, or does anyone know of another way (specifc Registry settings or ADM files that could be edited) to achieve this?
Thanks in advance.
Simon

Please, see solution:
The V2 release of MS15-027 / KB 3002657 that resolves NTLM v2
authentication failures by Windows Server 2003 DCs is available:
The X86 version is at http://www.microsoft.com/en-us/download/details.aspx?id=46147
The ia64 version is at: http://www.microsoft.com/en-us/download/details.aspx?id=46204
The amd64 is at: http://www.microsoft.com/en-us/download/details.aspx?id=46054
Best Regards, Andrei ...
Microsoft Certified Professional

I got my iphone4 updated via wifi and its shows downloaded and when i install it, it shows verifying software and then says error occured while installing ???

hi, there, i got my iphone4 updated via wifi n its downloaded, its shows when i check the software update n when i install it, it shows verifying the software n after a couple of seconds comes back with "error while installing ios6" failed so many attempts and even tried to reset the phone, but no use, then i tried latest updated itunes too, can u believe it, it took ages to download n when it was 880mb of the 899mb file, error occured , so many failed attempts, can some one tell me what to do ? are there any issues with iphone4 updates? m scared to update it now, but really wanna get it on my phone.

I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.

How do I update the iOS software on iTunes for Windows

Hi all.
The battery life in my phone was decreasing very quickly to the point where I have turned it off with 100% at night, and wake up in the morning to have it at 0%. So yesterday, after making a few calls I got to this nice man who explained to me that it was not a problem with the battery, but I needed to update to the latest version of iOS (generally fixes the problem). I don't have enough space (and cannot clear it), so he suggested another option. I would have to use iTunes. First he told me to upload my data to iCloud. As I have not done it before, it took a while, and it did not work for a while. He sent me the link of what to do via email (Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support) and hung up, after me thanking him. My cloud finally updated a little before 10PM GMT and I went to sleep. In the morning my battery was not dead, albeit it had only gone done by a few %. However, I still want to update to the newest software.
I have the latest version of iTunes on my laptop and so this morning I plugged in my phone to my laptop (using the computer - phone plug). However I cannot see where to select my device. My phone is not coming up in any corner, and it is not charging when it is plugged into my laptop either (I read somewhere that it should). So my question is, how do I select my device. It is plugged in but it not coming up for me. Please be as explicit as possible.
If it helps I have an iPhone 4s bought in December 2013.
Thank you!

I'm not sure if it should be here or in the iPhone usage forum.

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not

I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102) "

I have been trying to update via App Store and every time only with apple software it starts to download and it will says it's calculating time remaining then an error message pops up saying " An error has occurred the request timed out. (102)" I have tried everything , I've been told its my ISP but I have tried using differenet internet to attempt the updates. Like I said all other software updates fine its just apple software

http://www.apple.com/support/mac/app-store/contact.html?form=account

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

Getting Windows 10 Updates via WSUS?

There are a number of us previewing Windows 10 within our organisation, and these machines reside in OUs which result in them getting updates via WSUS. I presume this configuration is the cause of there being no update ring or update build options within
the OS. Looking at our WSUS, we have no Windows 10 product catalog for us to approve any updates.
What's the expected update mechanism from Microsoft on Enterprise Previewers? I had assumed that the OS would be locked to updates direct from MS but it seems it is still working with WSUS.

Hey,
it's not fair to be honest. Of course you should not use a technical preview in a production Environment.
But it is possible to create a DEV active Directory which is using WSUS too.
So why not having a WSUS DEV product categorie to Support technical previews in WSUS from the Moment it is joined to a DEV Domain?
Regards,
Klaus

Windows 8.1 update via Intune software deployment

Similar Messages

Maybe you are looking for