Windows 8.1 Update VLSC ISO windows update error

I have a downloaded version of Windows 8.1 Update 1 from the VLSC and Windows Update fails after a clean install. I've installed it on different systems and multiple fail with the same error (80072EFE). The weird thing is that it works fine against our
WSUS server just not checking online. There isn't anything blocking the connection to Windows Update so not sure what is going on.

Hi,
If you receive Windows Update error 80072efe or 80072f76 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers. You can run Windows Update Troubleshooter that will automatically find
and fix some common problems with Windows update.
Windows Update Troubleshooter:
http://go.microsoft.com/?linkid=9830262
In addition, please check your security application setting, such as firewall.
Roger Lu
TechNet Community Support

Similar Messages

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

I have a Window 8.1 and there's no update for the New Windows 10

Dear Microsoft.
I'm From The Middle East, I have a windows 8.1, and saw that there is a new update in Windows site, I followed by steps to Download it and I examined the updates but I don't have a new update to the Windows 10.
Mahmoud Al-Daher

Dear Microsoft.
I'm From The Middle East, I have a windows 8.1, and saw that there is a new update in Windows site, I followed by steps to Download it and I examined the updates but I don't have a new update to the Windows 10.
Mahmoud Al-Daher
Mahmoud Al-Daher,
Forget about getting Win 10 via Windows Update. You can download the Build 10041 ISO from this Official download site:
http://windows.microsoft.com/en-us/windows/preview-iso-update-1503
Make sure you select the correct bit version, i.e. 32-bit or 64-bit. Language is your choice.
Once you have the ISO downloaded and saved to your computer, you have 2 options :
1. Burn the ISO to a bootable DVD or a USB with at least 4GB of capacity. Then you can use it to do a clean install.
https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool
2. You can just go to the location where the ISO file is stored > right
click at it > click Mount > click Setup.exe.
The system will start installing.
After you have build 10041 installed and you have set to Fast ring, you will be offered the latest build 10049.
NOTE : Before you do one of the above, I would suggest that you do NOT install Win 10 TP over your Win 8.1. It would be better if you selected one of the following methods of installing Win 10 TP:
1. Dual boot Win 8.1 and Win 10 TP.
2. Install Win 10 TP on a virtual machine.
The advantage of the above 2 methods is that you have 2 operating systems in your computer. You can choose which one to use any time. If you dislike Win 10 TP, you can simply remove it with couple of clicks. It's that simple to remove, and you have your Win
8.1 like nothing has ever happened.

Offline install of Windows 7 SP1 not recognised by Windows Update

Hi
I have asked this question over at the Windows Community forum, and someone suggested that I ask here.
This question regards Windows 7 and Service pack 1
I bought a couple of new computers, and decided to use the offline SP1 installation on each to get the computers up to date when I first configured them.
So I downloaded the offline update iso from Microsoft, created a DVD and installed SP1.
After configuring my computer, I then connected windows update to get all fixes etc since SP1.
To my dismay windows update has presented me with a list of *all* updates, including SP1.
Is there any way of getting Windows update to recognise the fact that I already have SP1 installed?
Further info:
This is the procedure I went through.
1) Built the computers
2) Installed Windows 7
3) Installed hardware device drivers
4) Installed SP1 from DVD
5) Connected to the internet
6) Activated Windows
7) Used Windows Update
8) Installed the fix/patch required for windows update to work
9) re-connected to windows update
10) Was dismayed at the list of fixes requiring download. (around 148)
After going through the process of downloading the updates, at around the time of the second re-boot, the list of updates included Service Pack 1.
AV Software was going to be the next thing to install, after the computer was *fully* patched
Further Further informatio :)
I have since gone ahead and installed Windows on my second computer.
I'm still interested in finding a solution for future reference.
After installing Windows7 and applying the offline SP1 update, I checked to see what updates were installed before
activation and connecting to windows update.
These are the updates listed.
1) Service Pack 1 for Windows 7 (KB976902)
2) Update for MS Windows (KB976902)
3) User Mode Driver framework V1.11 (KB2685813)
4) KB958488 (the list just haqd the kb number, no title)
5) Hot Fix for Windows (KB2505454)
My original question, and the answers/feedback can be viewed at the following page:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/offline-install-of-windows-7-sp1-not-recognised-by/e8ab61d0-8669-4297-acfd-4acc0da8c1dc?rtAction=1427893878897
Cheers...
Daz

Hi Daz,
You mentioned that the SP1 prompted again in the needed updates, I suspect that that is not the full service pack, it is only some changes to existing non-security content, appropriate 10 MB size. you can check the size of the update to confirm
this.
See more information in this link
http://support.microsoft.com/en-us/kb/894199
And after you have manually installed the updates offline, have you checked whether these updates are listed in the "installed updates", or in Update history? And you can check the new detected updates, whether they have been successfully installed
in your system. Meanwhile, when you check for updates online, please check your Windows Update settings, we recommend you to check for important updates, not optional updates or hotfix. You can install the optional update or hotfix when you need it in the
future.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Media Player keeping Automatic Maintenance window/Windows Updates from doing auto-restart

I have a system that is connected to a domain, and it runs a video playlist in Windows Media Player for digital signage upon bootup (and auto-login). WMP is set to loop the videos over and over again, but it also is preventing automatic updates from
installing and/or auto-restarting at 3:00AM in the morning (and yes, the system power management is set to keep the computer on all the time).
How can I fix this?
I have a GPO set up to install updates and restart automatically (option 4). I tried the GPO option to use the Windows 8 maintenance window to install updates, and also tried turning that option off and just using a 3:00AM restart period. Neither
option seems to work, so it looks like Windows Media Player is preventing an auto-restart to finish the update installation. Is there any way around this, so that Windows Media Player doesn't stop Windows Updates from doing its job? I don't care
if that means the video stops playing because it just starts up again on the next bootup.
I looked at the WMP GPO's and the only option that sounds like it's related is the option to turn on or off the auto-updating of media info for WMP, but it has nothing to do with what I'm trying to accomplish. If I missed something, let me know.
If there is some other way to accomplish this, such as associating and launching the playlist file with the Xbox Videos app, I would be fine with that, but I need it to loop the playlist continually (I also use the Shuffle option
in WMP - ***see note below for another question). I still want the system to automatically install updates and reboot on a regular schedule despite the video playing in the foreground.
***Side question: is there any way to turn Repeat and Shuffle options on in WMP without having to load the GUI (for scripting a playlist)?
Just FYI: this system is actually using Windows Embedded 8.1 Industry Enterprise (from a MAPS account), but it isn't customized aside from not having the standard WinRT apps from a stock Win 8.1 install loaded - it is a stock install from the ISO.
From what I understand, it is the same as Windows 8.1 Enterprise, except that it is only licensed to be used as an "appliance" machine for a single role - which it is. So I'm assuming that there are no actual differences from a "regular"
Windows 8.1 SKU that would cause this issue. If I am completely mistaken about this, please notify me on it. The reason I'm making this statement is in case there are any differences in Embedded 8.1 Industry Enterprise that I am not aware of.
Otherwise, I welcome any assistance that would target a "regular" version of 8.1 Enterprise. NOTE: Someone said to post this into the Windows Embedded forum, but the only one that exists is the one for POSready - and this is HARDLY the
POSready version of Windows Embedded that I'm using.

Hi,
Did you use the policy Local Computer Policy\Administrative Templates\Windows Components\Windows Update\Always automatically restart at the scheduled time?
I noticed an description "restart with logged on users for scheduled automatic updates installations" policy is enabled, then this policy has no effect." it means if system installed some updates which unneeds restart computer, this policy would has no effect.
In my opinion, your problem should not caused by WMP setting. please check your installed updates whether they need restart computer.
In addition, Power Managment in Control Panel also can prevent the schedule task running.
Control Panel\System and Security\Power Options\Edit Plan Settings\Change advanced power settings\Sleep\Allow wake timers
Please make sure this option is enable.
Roger Lu
TechNet Community Support

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

Error while updating a custom Windows Azure Diagnostics configuration xml from powershell. "Invalid update to extension reference for role"

I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error.
What am I overlooking?
I am following these instructions:
Step 5: Remotely install Diagnostics on your Azure Virtual Machine
azure.microsoft.com/en-in/documentation/articles/cloud-services-dotnet-diagnostics/#virtual-machine
$storage_name = "wadexamplevm"
$key = "<StorageAccountKey>"
$config_path="c:\users\<user>\documents\visual studio 2013\Projects\WadExampleVM\WadExampleVM\WadExample.xml"
$service_name="wadexamplevm"
$vm_name="WadExample"
$storageContext = New-AzureStorageContext
-StorageAccountName $storage_name -StorageAccountKey $key
$VM1 = Get-AzureVM
-ServiceName $service_name -Name $vm_name
$VM2 = Set-AzureVMDiagnosticsExtension
-DiagnosticsConfigurationPath $config_path
-Version "1.*"
-VM $VM1 -StorageContext $storageContext
$VM3 = Update-AzureVM
-ServiceName $service_name -Name $vm_name
-VM $VM2.VM
Unfortunately, I am receiving this error:
Update-AzureVM : BadRequest: Invalid update to extension reference for role: XXXXXX and reference: IaaSDiagnostics.
What's missing from the above script?

Hi,
Since Azure SDK 2.5 uses the extension model the diagnostics extension, the configuration and the connection string to the diagnostic storage are no longer part of the deployment package and cscfg. All the diagnostics configuration is contained within the
wadcfgx. The advantage with this approach is that diagnostics agent and settings are decoupled from the project and can be dynamically enabled and updated even after your application is deployed.
Due to this change some existing workflows need to be rethought – instead of configuring the diagnostics as part of the application that gets deployed to each environment you can first deploy the application to the environment and then apply the diagnostics
configuration for it. When you publish the application from Visual Studio this process is done automatically for you. However if you were deploying your application outside of VS using PowerShell then you have to install the extension separately through
PowerShell.
There PowerShell cmdlets for managing the diagnostics extensions on a Cloud Service are -
Set-AzureServiceDiagnosticsExtension
Get-AzureServiceDiagnosticsExtension
Remove-AzureServiceDiagnosticsExtension
You can use the Set-AzureServiceDiagnosticsExtension method to enable diagnostics extension on a cloud service. One of the parameters on this cmdlet is the XML configuration file. This file is slightly different from the diagnostics.wadcfgx file. You can
create this file from scratch by either following the article that you are referring to or you can modify the wadcfgx file and pass in the modified file as a parameter to the powershell cmdlet.
To modify the wadcfgx file –
Make a copy the .wadcfgx.
Remove the following elements from the Copy:
<DiagnosticsConfiguration xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<PrivateConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<StorageAccount name=" " endpoint="https://core.windows.net/" />
</PrivateConfig>
<IsEnabled>false</IsEnabled>
</DiagnosticsConfiguration>
Make sure the top of the file still has xml version and encoding –
<?xml version="1.0" encoding="utf-8"?>
Effectively you are stripping down the Wadcfgx to only contain the <PublicConfig> section and the <?xml> header. You can then call the PowerShell cmdlet along with the appropriate parameters for the staging slots and roles:
$storage_name = ‘
<storagename>’
$key= ‘<key>’
$service_name = '<servicename>'
$public_config = '<thepublicconfigfrom_diagnostics.wadcfgx>'
$storageContext = New-AzureStorageContext –StorageAccountName $storage_name –StorageAccountKey $key
Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config –ServiceName $service_name -Slot ‘Staging’ -Role ‘WebRole1’
Hope this helps !
Regards,
Sowmya

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Unable to install itunes 10.5 after update issue. "windows installer package error"

So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
   • msiexec /unregister
   • msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1.       Choose Start > Computer
2.       In Computer, open the "C:" drive.
3.       Open the Users folder.
4.       Double-click the folder titled with your username.
5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6.       Choose Organize > Folder and Search Options.
7.       Click the View tab.
8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9.       Click OK.
10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11.    Double-click the Local folder to open it.
12.    Right-click on the Temp folder and choose Delete.
13.    In the confirmation dialog that appears click Yes.
14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15.    Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1.       Quit iTunes.
2.       From the Start menu, click Control Panel.
3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4.       Select iTunes from the list of currently installed programs, then click Uninstall.
5.       When asked if you would like to remove iTunes, click Yes.
6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Problem updating CS5 on Windows 8.1

I have successfully installed Ps CS5 on a laptop running Windows 8.1. When I attempt to update Ps (Help >Updates . . .) I get this error message:
The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. Please try again later.
I do not get this message when I select Updates on my Windows 7 computer, and I did not get it when I installed Ps CS5 on a different laptop running Windows 8. (I uninstalled it from that laptop.) I have tried turning the firewall off, but that did not help.
Any suggestions would be appreciated!
Will

This might be the solution:
http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html

I updated iTunes from the update message and now my Windows computer (at work- I use Mac at home) keeps sending me error messages about MobileMe and iTunes. It indicates a .dll error but I can't find any such file. I tried removing the entire ITunes app.

I downloaded an update to my iTunes app on my work Windows computer and now I am constantly getting error messages about MobileMe, when I download a webpage and marked slowness of my Outlook application. I tried removing iTunes and reloading directly from the Apple site, but no change. One of my peers is having the same issue and messages.
Any suggestions?

See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
tt2

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

Can't update quicktime on windows xp. Try to install 7.7.3 and it says I have a newer version installed. I don't of course, I have 7.3.1. Have never been able to update it. Even uninstalling older version it still says a newer version is already installed

Can't update quicktime on windows xp. I have 7.3.1 and when I try to install 7.7.3 it says I have a newer version already installed??? Even uninstalling the older one, it still says the same thing. I haven't been able to update it since 2007.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Windows 8.1 Update VLSC ISO windows update error

Similar Messages

Maybe you are looking for