Windows 8.1 Update (with WinPE 5.1) ADK + SCCM 2012 R2 and WinXP

Hello,
I see new ADK version (8.1 Update) is released
http://www.microsoft.com/en-US/download/confirmation.aspx?id=39982
It contains WinPE 5.1 and new USMT (which version?), does it support migration from WinXP to Win7?
Previously I used USMT5 (instead of 6.3) and modified WinPE 5.0 with bootsect.exe from WinPE 4.0 (from ADK 8.0) on SCCM 2012 R2 CU3.
And can I use ADK 8.1 Update with SCCM 2012 R2?

He does answer your question about the USMT version.
The rest still applies in terms of XP support. See below.
http://blogs.technet.com/b/mniehaus/archive/2014/01/09/migrating-from-windows-xp-to-windows-8-1-using-mdt-2013.aspx
Yes, ConfigMgr 2012 R2 is supported.
http://blogs.technet.com/b/configmgrteam/archive/2014/04/03/understanding-the-adk-for-windows-8-1-update-and-configmgr-osd.aspx
Daniel Ratliff | http://www.PotentEngineer.com
in the article I found:
Windows PE version 5.1 is not needed for Configuration Manager and can actually be problematic if you try to use it. Windows PE 5.0 can continue to be used to deploy Windows 8.1 Update. There is a documented process to upgrade Windows PE to version 5.1,
but this should be considered incompatible with Configuration Manager at this time.
So for a new installation of SCCM 2012 R2 I can install ADK 8.1 update because in contains WinPE 5.0 and option to update to 5.1. And unclear about XP, it seems XP is not supported again.
Also fourth release was in September 2014, but article was posted in April 2014.

Similar Messages

Windows 8.1 update with KB2919355 keeps failing

hi,
I'm trying to get my Windows 8.1 updated with KB 2919355 but it keeps failing with error code E0000100.
I've tried tried to resolve using the "clearcompressionflag" tool, but that had no effect. The update will install but after reboot of machine, the update fails.
I'm running 64 bit and the pc is upgraded from Win 7 then Win 8 and finallly Win 8.1.
Please help.
Thanks
Marc

WindowsUpdate.log is here:
Aha. I think we are going to need a previous piece of the CBS.log. This KB2919355 is so huge that it seems to have wrapped the one that you are showing us. I.e. I suspect the most interesting piece of it will reflect what happened to produce
this event (or an earlier one of the same code 0xE0000100)
2014-08-12 16:55:42:109 1060 f54 Report REPORT EVENT: {AF27B9C6-D4EB-4CB5-86C3-1779B31F5941} 2014-08-12 16:53:00:527+0200 1 195 [AU_SCHEDULED_INSTALL_FAILED] 101 {26E2A7EE-34D5-4161-AB79-56625337046F} 207 e0000100 AutomaticUpdates Failure Content Install Installation Failure: Windows failed to install the following update with error 0xe0000100: Windows 8.1 Update for x64-based Systems (KB2919355).
2014-08-12 16:55:42:139 1060 f54 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-08-12 16:55:42:329 1060 f54 Report WER Report sent: 7.9.9600.17092 0xe0000100(0) 26E2A7EE-34D5-4161-AB79-56625337046F Install 101 Unmanaged
2014-08-12 16:55:42:350 1060 f54 Report CWERReporter finishing event handling. (00000000)
2014-08-12 16:55:56:986 1060 ae4 Driver Matched driver to device PCI\VEN_1002&DEV_9640&SUBSYS_77481462&REV_00
2014-08-12 16:55:57:001 1060 ae4 Driver Status: 0x180200a, ProblemNumber: 00000000
Unless that driver information is enough of a clue to help you devise a workaround? What is that device? You could use WMIC (or Powershell) to find out more.
E.g. try
wmic Path CIM_SystemDevice where (__RelPath like "%Ven_10%") get PartComponent
I'm sure we could find something more specific but that gives you an idea I hope.
You can do a Find in your WindowsUpdate.log for Installation Failure: to see that there is a definite pattern to the failure reports: 4 install errors and 1 download failure then 1 install error and 1 download failure.
So I suspect that the last ones, for the download failure, or even the quick install error is not going to be as interesting as the first of a set of 4. E.g. those later ones may just be the server throwing up its hands and saying: Go
away! (figuratively speaking, of course.)
Of course I may be completely off the mark here with such speculation, so you may prefer to leave it to Darrell to choose what he wants to look at. Thanks for both diagnostics. I think they will help.
Robert Aldwinckle

Wifi profiles SCCM 2012 R2 and Windows Intune

Hi All,
A quick question regarding SCCM 2012 R2 and the new Wifi Profiles feature...
Can anyone confirm if you need windows Intune combined with SCCM 2012 R2 to be able to deploy WIFI profiles to users devices i.e Windows 8.1, IOS and Android platforms? Microsoft documentation is not clear on this subject.
Any help would be much appreciated.
Regards PowerShell90

It not as straight forward as one would hope. I am running the latest version of SCCM 2012 R2 CU2 connected to my Windows Intune subscription. There are a lot of hickups. One is that the direct of management needs to be all or nothing. In other words you
either need to use Windows Intune solely to manage your devices or SCCM 2012 R2 (via connector). If the later then you must do everything from in SCCM 2012 R2. You cannot hybrid manage your devices as this will screw things up.
Android for some reason is left out on a lot of features. I would think that MS Devs would work hard on the market share that being Android, not iOS. Any way, accord to some official MS articles Android is supported, but others claim that not all features
are, these being the important ones like Email and Wi-Fi Profiles. They simply do not work.
I think MS is heading in the right direction but there is a lot of work that needs to be done before this is a competitive product. I could care less if connects to my SCCM 2012 R2 server or not. Here are few things that I sent o a MS Support Rep today that
need to be address.
1. Better response time when updating devices after enrollment (e.g. Name change).
2. The ability to locked down uninstalling Windows Intune from device.<o:p></o:p>
3. The ability to locked down certain features in the Windows Intune app on device (e.g. User can reset device with Windows Intune app, rename, etc...).<o:p></o:p>
4. Ability to rename device in either Windows Intune Admin Portal and/or SCCM 2-12 R2.<o:p></o:p>

Deploy Java Updates using SCCM 2012 SP1 and SCUP 2011

What is the best way to deploy Java updates using sccm 2012 SP1 and SCUP 2011?

I didn´t find Kent´s blog useful when talking about Java. I can deploy Adobe products fine, but I have to import Java manually because not having Shavlik certificate. So with that said, I have the fallowing problem;
I have full offline installer unpacked, .msi file and Data1.cab. When I´m importing these binaries to SCUP, I only can point to .msi. Doing that, installation fails in client side fails because of lack of data1.cab fine, which is the main file.
Should I use some other downloaded files of Java? I couldn´t find any Java-update-file only type of files to download.

Error in push sccm client CcmSetup failed with error code 0x80070643 ccmsetup sccm 2012

i want to push sccm client for all computer i enable automatic side-wide client installation
some computer get error code 0x80070643
ccmsetup sccm 2012 this
when i tray manual installation get same error and ccmsetup.exe stopped

Duplicate of
https://social.technet.microsoft.com/Forums/en-US/3bac4677-46b0-4d96-b63d-a819efcc7f35/error-in-push-sccm-client-ccmsetup-failed-with-error-code-0x80070643-ccmsetup-sccm-2012?forum=configmgrgeneral
Please don't double post.
Jason | http://blog.configmgrftw.com | @jasonsandys

Deploy UDI Windows 10 with SCCM 2012 R2 and MDT 2013 Update 1

Hi,
Trying use "User-Driven Installation" with
SCCM 2012
R2 CU4 and MDT
2013 Update 1 for deploy Windows
10.
Created MDT Task Sequences with
template "Client Task sequence"
and Deployment Method "User-Driven Installation".
When I try to deploy I have error like:
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Part smsts.log
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Expand a string: WinPEandFullOS TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: smsswd.exe /run: cscript "%deployroot%\scripts\ztierrormsg.wsf" TSManager 22.04.2015 11:36:57 1160 (0x0488)
[ smsswd.exe ] InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
PackageID = '' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
BaseVar = '', ContinueOnError='' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
SwdAction = '0001' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Set command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Working dir 'not set' InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Executing command line: Run command line InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft (R) Windows Script Host Version 5.12 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Copyright (C) Microsoft Corporation. All rights reserved. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Microsoft Deployment Toolkit version: 6.3.8216.1000 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
ZTI deployment failed, Return Code = 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Unable to create WebService class InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Command line returned 5001 InstallSoftware 22.04.2015 11:36:57 1740 (0x06CC)
Process completed with exit code 5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
!--------------------------------------------------------------------------------------------! TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the action: Error in the task sequence.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionRetCode=5001 TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 22.04.2015 11:36:57 1160 (0x0488)
Clear local default environment TSManager 22.04.2015 11:36:57 1160 (0x0488)
Let the parent group (Gather Logs and StateStore on Failure) decides whether to continue execution TSManager 22.04.2015 11:36:57 1160 (0x0488)
The execution of the group (Gather Logs and StateStore on Failure) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
Failed to run the last action: Error in the task sequence. Execution of task sequence failed.
The operation cannot be completed because other resources are dependent on this resource. (Error: 00001389; Source: Windows) TSManager 22.04.2015 11:36:57 1160 (0x0488)
MP server http://sccm.domain.com. Ports 80,443. CRL=false. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting authenticator TSManager 22.04.2015 11:36:57 1160 (0x0488)
Set authenticator in transport TSManager 22.04.2015 11:36:57 1160 (0x0488)
Sending StatusMessage TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting message signatures. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Setting the authenticator. TSManager 22.04.2015 11:36:57 1160 (0x0488)
CLibSMSMessageWinHttpTransport::Send: URL: sccm.domain.com:80 CCM_POST /ccm_system/request TSManager 22.04.2015 11:36:57 1160 (0x0488)
Request was successful. TSManager 22.04.2015 11:36:57 1160 (0x0488)
Executing command line: X:\WINDOWS\system32\cmd.exe /k TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
The command completed successfully. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)
Successfully launched command shell. TSBootShell 22.04.2015 11:37:31 696 (0x02B8)

MDT Updates for Windows 10 Technical Preview Build 10041
Если Вам помог чей-либо ответ, пожалуйста, не забывайте жать на кнопку "Предложить как ответ" или "Пометить как ответ".
http://zalozny.com.ua

Download window no longer updates with files I download. It still pops up. Does it get full?

Downloads windows stopped updating with files I download.
It still pops up. and the files do download.

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

Windows could not update the computer's boot configuration Server 2012

I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps.

Problems with E531 network drivers in SCCM 2012 R2

We are having some serious issues with SCCM 2012 R2 operating system deployment (Windows 7) and the Thinkpad Edge E531 laptop - network drivers are not being applied during the imaging process. Do SCCM driver packages exist for this laptop?
I downloaded the ethernet drivers manually from here, extracted the files from the executable, imported the drivers into SCCM (it found them), and created a driver package for this model. I also added the drivers to the boot images.
I do not have an issue during the PXE phase, it is only during the Windows phase - and the laptop is unable to join the domain because it does not have network drivers.
In the OSD Task Sequence, I have tried both the auto-apply device drivers rule (default), and creating a special rule for Lenovo E531 with the WMI query: SELECT * FROM Win32_ComputerSystem WHERE Model LIKE "%6885YU%" . The task sequences all work perfectly on virtual machines, so I am fairly certain this is a driver issue. I have tried Windows 7 x86, x64, and Windows 8.1 x64.
Any thoughts are welcome - I am new to this particular school district and have never deployed Lenovo in my previous environments. I am about to select a model for this year's laptop purchases and at this point, I am backing away from Lenovo due to this issue.

We do not create SCCM driver packs for the Edge line of products. As an alternative you can use Update Retriever to download hardware drivers for a selected model and then use the Export feature to create a folder containing the source files for the drivers. This can then be used in the Driver Import Wizard which will locate the INF files and only import the files referenced by the INF files.
You mention you are using SCCM 2012 R2. This means you should be using the Windows ADK for 8.1 which also means your boot images should be using Windows PE 5. For your boot images you should be using the Windows 8.1 driver (http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/herr01ww.exe)
In your OSD task sequence you need to be deploying Windows 7 drivers (http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/her101ww.exe)
Make sure you keep these separate. Meaning you should have a driver package for the Windows 7 drivers that you reference in an Apply Drivers task and this package should not include the Windows 8.1 drivers. Add just the 8.1 drivers to the boot image.

SCCM 2012, Intune and Windows OS Support

I am just trying to confirm what I believe I am reading about Microsoft OS Support for Windows Intune when integrated with SCCM 2012 R2...
What I believe to be the case:
Windows RT, Windows RT 8.1, Windows 8.1 all have the ability to enroll via OMA-DM, thus can be managed by SCCM.
Down-level OS's such as XP SP3, Vista, and Windows 7 require the Intune Client to be installed, thus can only be managed by a standalone Intune subscription?
Can anyone confirm this?
Thanks!

More or less correct.
Generally, even for Win 8.1 and WinRT, IBCM or DirectAccess are a better choice than OMA-DM as it can only enable management of a limited subset of features. Two important ones cannot be: software updates and endpoint protection.
As you've seen (based on your other thread), you can still use the Intune subscription that is connected to your ConfigMgr site to manage devices with the Intune client installed. Effectively, there are two halves of the Intune subscription, the full client
management half and MDM half which can be controlled by Intune or ConfigMgr. Just because the MDM half is controlled by ConfigMgr does not technically preclude you from still utilizing the full client management half. That's not at all saying you should do
this though, but you certainly could.
Jason | http://blog.configmgrftw.com

SCCM 2012 OSD and WinPE-StorageWMI?

Hi,
I am using SCCM 2012 SP1 OSD with MDT 2012. I am trying to work out how to use the command from the
WinPE-StorageWMI.
I have added them to my boot wim and am trying to invoke them from powershell from the F8 prompt first
then once I get them going in there put them in my task sequence.
However when I do not see them?
Am I not seeing any extra modules is there something basic I am missing? Am I meant to see a module
called WinPE-StorageWMI?
Thanks,
Ward.

The module is a part of Powershell. You need to enable WinPE-PowerShell.
http://technet.microsoft.com/en-us/library/hh824926.aspx
Juke Chou
TechNet Community Support

SCCM 2012 R2 and Windows 8.1

Hi,
I have installed SCCM 2012 R2. SCCM client deployed on 10 PCs and I can explore Hardware resources on all PCs except 1 PC which is 8.1
so my question now does SCCM 2012 R2 supports 8.1?
Thanks,
Kareem Behery

Hi,
Yes, ConfigMgr 2012 R2 supports Windows 8.1. Check the Windows 8.1 computer to make sure that the SCCM client is operational and sends in Inventory to the Site server. Inventpryagent.log file on the computer is a good place to start.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Help with Linking A Report in SCCM 2012

I've got a report that shows us Flash Players Versions by Count. I'd like to be able to create a linked report that shows the specific computers that have a specific version. The current report looks like this
I'd like to be able to click on a link in the Version column that would display the result of this somehow.
Are any SCCM 2012 reporting gurus out there that have done something like this?
For example, I'd like a link from the Version field to run a report that
Orange County District Attorney

My first recommendation is to adjust the query you are currently using as it will only show you x86 software titles.
As for how to do it, that is easy (sort of). Write your two reports,Make sure that your second report have prompts of everything that you want to pass to it.
Now are you sign BIDS or RP to create your reports? You need to know this as it is a lot harder to do this with RB vs BIDS.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 and windows 7 folder redirection

Hello gurus
I want to ask a quick question. Does anyone know if I can do folder redirection, offline folders, roaming profiles and network drive on Windows 7 using SCCM 2012 R2?
Thanks in advance.
Regards,

The setting does not apply to Windows 7. I tested and DCMagent just thought it is Non-applicable.
Juke Chou
TechNet Community Support

Windows 8.1 Update (with WinPE 5.1) ADK + SCCM 2012 R2 and WinXP

Similar Messages

Maybe you are looking for