Windows 8.1 VPN Functionality dissappears after joining a domain
Hello!
I can not seem to Identify the cause behind the following problem, I assume it is GP or permission related but I can not discover where.
Summary:
-New Tablet purchased from dell (Venue 11 pro series) started as windows 8.1 and the 8,1 pro pack update key was applied to enable domain functionality
-Setup and create network connections and establish a VPN connection as the local Admin ( Everything works)
-Join a domain
-Log on as a domain Admin
-Attempt to setup a VPN connection and an error is displayed in Charms saying "There is a problem with your modem or network adapter"
-Sign off and log on as the local administrator
-Attempt the same VPN setup, and the connection works and I receive the login credentials window in charms and the VPN can be established.
If anyone has any knowledge about this please let me know, I have yet to find 1 case similar to this.
****Update-
The VPN Connection appears in the Internet Options window Under the connections Tab, but when opening settings and properties I receive the following error:
"Cannot Load the remote access connection manger service.
error 5: Access Is denied"
In services the accounts appear to be correct for the log-on as local system
Attempting to change this to a domain admin account or local admin account proved to cause addition problems with other services because they did not have the same log-on accounts being used in the same process...
Again a search on this has yielded results for other OS but not Windows 8.1, Any fixes for these other OS that were attempted resulted in more log-on confilcts.
Any help would be appreciated.
Hi,
According to your description, it seems like there was a problem with remote access connection manager service, please access to the path below to check RasMan rights, make sure all the user have write rights.
1. WIN+R, open Run, type regedit, press Enter.
2. Narrow to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RasMan
If problem persists, please contact Domain Adminstrator to check if there any limits with VPN.
Roger Lu
TechNet Community Support
Similar Messages
-
windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?
This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
This may help use diagnose this issue and your other thread's printer issues.
Thank you,
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
[Note that I have previously posted this question on Experts Exchange... but have not found a solution yet].
We are a small business and would like to switch to two-factor authentication for VPN connections. We spent nearly a year helping Barracuda debug their small business VPN appliance and finally they took their boxes back and gave us back our money - they
just couldn't get file sharing to work consistently with some new firmware they had to install due to a patent case.
So... now we are trying Phonefactor.
Our VPN setup is RRAS on a Windows Server 2003 domain controller.
We have installed Phonefactor, enabled it as a Radius server, and configured RRAS to point to Phonefactor for Radius authentication. We configured phonefactor to send text messages for authentication, as we figured that would be less disruptive than a phone
call.
It all works except... the timeout for VPN clients is only 20 seconds! By the time we receive the text message on a cell phone, sometimes there is only 5 or 6 seconds to get the six digit code typed into a reply on the cell phone... and unless we are really
nimble, that is frequently not enough time!
When the VPN client times out, it gives an Error 718 "The connection was terminated because the remote computer did not respond in a timely manner."
How can we increase the timeout on the VPN clients, so we can more reliably enter the authentication code in a reply back to phonefactor?
Things we have tried:
1) Connecting (PPTP) from different Windows clients to see if we get different timeout limits. So far we have tried several Windows 7 boxes and a Windows Server 2003 as the client, but in all cases the timeout is 20 seconds.
2) On the windows clients: Searching through the PPTP client settings to see if there is one labeled "connection timeout". So far we have found nothing.
3) On the windows 2003 server: Modifying the RRAS Radius Server time-out to be 30 seconds, 60 seconds, 300 seconds. We've tried restarting RRAS after these changes, but the client connection timeout is still 20 seconds.
4) In the phonefactor configuration: Searching through the radius server settings to see if there is one labeled "connection timeout". So far we have found nothing.
5) Using NTRadPing to connect directly to the phonefactor radius server. With NTRadPing we were able to wait more than 60 seconds without a timeout from phonefactor. So we don't *think* at this point that the issue is within phonefactor.
6) We have asked phonefactor support, but their response is "hmmm... good question, we don't know, that sounds like a problem with your vpn client". And they could well be correct.
7) Search the web for how to increase either the stock windows VPN client timeout, or the RRAS radius authentication timeout. No luck so far.
8) Try this registry hack:
http://windowsitpro.com/networking/solving-ras-718-error. Didn't help.
Any ideas?
thanks!Hi fdc2005,
Thanks for the post.
However, generally, we first type User Name, Password, then click connect to establish the VPN connection. Such as:
Therefore, I have a little confusion about the timeout you mentioned. Would you please provide us more details.
Regarding error 718, please check if the following could help:
If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting MS-CHAPv2.
Steps to follow for resolution:
(1) Check if the Routing and Remote Access Server (RRAS) is configured to allow connections with MS-CHAPv2
(2) Check if the RADIUS server policy supports MSCHAPv2 (This step is needed if you control access to clients using Remote Access Policies on the IAS/NPS server)
Quote from:
Troubleshooting Vista VPN problems.
Hope this helps.
Jeremy Wu
TechNet Community Support -
Network Category not set to 'DomainAuthenticated' after joining domain.
I have a several hundred Windows 2012 servers that do not update thier network category to 'DomainAuthenticated' after being joined to a domain. All my networks are unidentified and thus set to public. I can run the following command and change
them to private, but all documentation says that it should auto-magically change to DomainAuthenticated after joining a domain. Does anyone have a solution?
Get-NetConnectionProfile
|
where {$_.NetworkCategory
-eq
"Public"}
|
Set-NetConnectionProfile
-NetworkCategory
PrivateHi,
If the server is domain joined, when it starts to detect the network location, the machine will contact a DC via port 389. If this detection successful, it will get the domain profile. And we cannot change
it. If the domain was not found or process failed, NLA will let you to determine which firewall profile will be used, private or public.
For more information about Network Location Awareness, you may refer to the following article. It also applies to Windows 2012.
Network Location Awareness (NLA) and how it relates to Windows Firewall Profiles
http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
OS pre-instaled CM12 Client, but it can not automatically find site after joining Domain
Background:
we update sccm 2007 to sccm 2012 r2
For New PC, the OS pre-installed with our image by PC Vendor. The image has sccm 2012 client. So when users get the new pc, we only need to join the domain.
After joining the domain, 2012 client will never automatic locate the site code base on AD.
I do some testing.
Install client in the domain pc with parameter SMSSITECODE=AUTO, the site code can be located
Install client in the workgroup pc firstly, the join the domain. Client will never automatic locate the site code base on AD
But If I click Find Site in the Advanced tab of the Configuration Manager Properties in
the Control Panel. The site code can be located.I'm going to guess you're running 2007 and 2012 side by side, in which case you need to look at your boundary groups. In 2007 you simply had boundaries, in 2012 if you don't make boundary groups and assign boundaries and site site assignment to said
group nothing will happen.
If you have upgraded your infrastructure completely to 2012 but haven't upgraded all of your clients yet ... what you should be seeing is the opposite: 2007 clients wont check into 2012 unless you enable automatic client upgrade. Then there's
if you have overlapping site codes between the two systems.
Better detail See:
https://technet.microsoft.com/en-us/library/gg682060.aspx
Assignment scenario
Assignment outcome
You have used automatic site assignment and your System Center 2012 Configuration Manager boundaries overlap with Configuration Manager 2007 boundaries.
The client automatically tries to find a System Center 2012 Configuration Manager site.
The client first checks Active Directory Domain Services and if it finds a System Center 2012 Configuration Manager site published, site assignment succeeds. If this is not successful
(for example, the System Center 2012 Configuration Manager sites is not published or the computer is a workgroup client), the client then checks for site information from its assigned management point.
Note
You can assign a management point to the client during client installation by using the Client.msi property SMSMP=<server_name>.
If both these methods fail, site assignment fails and you must manually assign the client.
You have assigned the System Center 2012 Configuration Manager client by using a specific site code rather than automatic site assignment, and mistakenly specified a site code for a Configuration
Manager 2007 site.
Site assignment fails and you must manually reassign the client to a System Center 2012 Configuration Manage -
Solaris 11 - can't join AD domain
I've upgraded to Solaris 11 from 11 Express and am trying to join the system to an Active Directory domain. I first joined workgroup, then tried to rejoin the domain, at which time I get the following (names changed to protect the anonymous):
myuser@ganesh:~# smbadm join -u "DomainAdmin" lothlorien.domain.com
After joining lothlorien.domain.com the smb service will be restarted automatically.
Would you like to continue? [no]: yes
Enter domain password:
Locating DC in lothlorien.domain.com ... this may take a minute ...
Joining lothlorien.domain.com ... this may take a minute ...
failed to join lothlorien.domain.com: UNSUCCESSFUL
Please refer to the system log for more information.
/var/adm/messages shows this:
Nov 11 00:46:17 ganesh smbd[641]: [ID 270243 daemon.error] smb_ads_update_dsattr: ldap_sasl_interactive_bind_s Local error
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.error] smbns_kpasswd: KPASSWD protocol exchange failed (Cannot contact any KDC for requested realm)
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.notice] Machine password update failed
Nov 11 00:46:35 ganesh smbd[641]: [ID 702911 daemon.error] unable to join lothlorien.domain.com (UNSUCCESSFUL)
I know for sure the system is locating the DC and trying to register itself - I can see the events in the Windows event log. Having deleted the previous computer account, if I watch the Computers node of the AD Users & Computers MMC snap-in, I can see the Solaris system appear briefly as disabled, then disappear a few seconds later (with corresponding events in the DC's Security event log).
I can't find any documentation specific to S11 (as opposed to SE11) that addresses what might be different (if anything) in the smb join protocols. I know by now that S11 can autogenerate your /etc/krb5/krb5.conf so the fact that I can delete/rename that file and it will reappear with valid information validates the fact that it does locate and connect to the (K)DC and get relevant config info, not to mention that I can type garbage for my domain password and the behavior is different so it can do kerberos authentication.
I think the key error here is the "ldap_sasl_interactive_bind_s Local error" but it's not enough information for me to determine causality. I've already gone through Google searches and implemented changes related to the NTLM levels and so forth, but unlike with SE11 which I did have working, these did not solve the issue.
I'm still trying to go through the S11 documentation including the End of Feature Notices for what's changed but I didn't see anything revelatory in the Interop guide. I know this could also be something that's in my AD/GP configuration on the Windows side (e.g. I've implemented a PKI and strengthened system authentication among certain domain members). Has anyone run into anything similar? Do you have S11 (as opposed to SE11) joined to your domain?I finally got this figured out. It's a problem with client_lmauth_level on the smb service. the below script snippet configures Solaris 11 to join an AD domain on Windows 2008 R2:
echo *** Installing SMB system
pkg install system/file-system/smb
echo *** Installing SMB service
pkg install service/file-system/smb
echo server $TIMESERVER > /etc/inet/ntp.conf
svcadm enable ntp
echo *** Joining domain: $DOMAIN
svccfg -s smb setprop smb/client_lmauth_level=2
svcadm enable -r smb/server
smbadm join -u $DOMAIN/$DOMAINADMIN
Obviously, you should set the various variables for your local environment and probably a good idea to sync the clock explicitly instead of assuming ntpd will do it for you.
In addition, I had to set the auth level on the Windows 2008 domain:
Start -> Admin Tools -> Local Secuity Policy: Security Settings -> Local Policies -> Security Optiopns:
Network Security: LAN Manager authentication Level = Send LM & NTLM - Use NTLMv2 security session if negotiated -
After joining computer to the windows doamin i cannot change password for Mac for the domain user
After joining computer to the windows doamin i cannot change password for Mac for the domain user
Hi,
Did this problem occures after installed Windows 8.1 Update 1? Here is another thread that had similar problem. Also I don't think this problem relate with Domain. Please refer to the solution of the thread below for reference, If there is any
progress, please let us know.
http://social.technet.microsoft.com/Forums/en-US/08993680-b6f5-4e80-b031-d32fec97d682/not-able-to-right-click-on-tiles-after-81-update?forum=w8itproge
Roger Lu
TechNet Community Support -
OVM Server takes long time to boot up - gets stuck for minutes after joining domain
Server takes a long time to reboot. Seems to get stuck for 8-10 minutes every time after joining domain.
See below extract from /var/log/messages:-
Feb 1 16:39:49 svrshir441 kernel: OCFS2 1.8.0
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000E5144BF336A244A4 ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,4) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB00000500000328DE591E03F0DB ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,2) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB000005000024F2772BB88DAA6A ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,5) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B8721C8850D2C515 ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,1) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000EE77A2D3C8C7383B ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,0) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B96BA1B4B79D765E ( 0 1 2 ) 3 nodes
Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,3) on (node 1, slot 2) with ordered data mode.
Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain ovm ( 0 1 2 ) 3 nodes
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_BRM_status_show: BRM attribute is only forwarpdrive
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_show: host_trace_buffer is not registered
Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_size_show: host_trace_buffer is not registered
Feb 1 16:47:22 svrshir441 kernel: qla2xxx [0000:30:00.0]-1020:7: **** Failed mbx[0]=4006
No idea why it seems to pause for 8 minutes.[2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
, 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
ecking O2CB cluster "8cd10008859eaf59": Online\n Heartbeat dead threshold: 61\n Network idle timeout: 60000\n Network keepalive d
elay: 2000\n Network reconnect delay: 2000\n Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n 0004FB0000050000E5144BF336
A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
, 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
ecking O2CB cluster "8cd10008859eaf59": Online\n Heartbeat dead threshold: 61\n Network idle timeout: 60000\n Network keepalive d
elay: 2000\n Network reconnect delay: 2000\n Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n 0004FB0000050000E5144BF336
A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:270) Trying to mount /dev/mapper/360080e500036115200000b315294458d to /poolfsmnt/0004fb00000
50000e5144bf336a244a4
[2015-02-01 16:38:23 9555] DEBUG (ocfs2:295) /dev/mapper/360080e500036115200000b315294458d mounted to /poolfsmnt/0004fb0000050000e51
44bf336a244a4
[2015-02-01 16:38:24 10441] INFO (notificationserver:213) NOTIFICATION SERVER STARTED
[2015-02-01 16:38:24 10443] INFO (remaster:140) REMASTER SERVER STARTED
[2015-02-01 16:38:24 10444] INFO (monitor:23) MONITOR SERVER STARTED
[2015-02-01 16:38:24 10447] INFO (ha:89) HA SERVER STARTED
[2015-02-01 16:38:24 10448] INFO (stats:26) STAT SERVER STARTED
[2015-02-01 16:38:24 10451] INFO (xmlrpc:307) Oracle VM Agent XMLRPC Server started.
[2015-02-01 16:38:24 10451] INFO (xmlrpc:316) Oracle VM Server version: {'release': '3.2.8', 'date': '201404161506', 'build': '736'}
, hostname: svrshir441, ip: 10.90.17.41
[2015-02-01 16:38:24 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:38:24 10441] DEBUG (notificationserver:239) Connected to manager.
[2015-02-01 16:38:25 10441] INFO (notificationserver:267) Service started.
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdb-7:0:0:0 (unde
f:0x20470080e5361152:360080e500036115200000b315294458d)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdh-9:0:0:0 (acti
ve:0x20460080e5361152:360080e500036115200000b315294458d)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdd-7:0:0:2 (unde
f:0x20470080e5361152:360080e500036115200000b36529447cb)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdj-9:0:0:2 (acti
ve:0x20460080e5361152:360080e500036115200000b36529447cb)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdf-7:0:0:4 (unde
f:0x20470080e5361152:360080e500036115200000b39529448ba)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdl-9:0:0:4 (acti
ve:0x20460080e5361152:360080e500036115200000b39529448ba)
[2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdc-7:0:0:1 (acti
ve:0x20470080e5361152:360080e500037683a00000b1652944694)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdi-9:0:0:1 (unde
f:0x20460080e5361152:360080e500037683a00000b1652944694)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sde-7:0:0:3 (acti
ve:0x20470080e5361152:360080e500037683a00000b18529448bf)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdk-9:0:0:3 (unde
f:0x20460080e5361152:360080e500037683a00000b18529448bf)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdg-7:0:0:5 (acti
ve:0x20470080e5361152:360080e500037683a00000b1a529449ac)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_SD] sdm-9:0:0:5 (unde
f:0x20460080e5361152:360080e500037683a00000b1a529449ac)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-5 (360080e5000
36115200000b39529448ba)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-1 (360080e5000
36115200000b36529447cb)
[2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-0 (360080e5000
37683a00000b1652944694)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-2 (360080e5000
37683a00000b18529448bf)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-3 (360080e5000
37683a00000b1a529449ac)
[2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:25 {STORAGE} [ADD_DM] dm-4 (360080e5000
36115200000b315294458d)
[2015-02-01 16:38:29 10444] DEBUG (monitor:36) Cluster state changed from [Unknown] to [DLM_Ready]
[2015-02-01 16:38:29 10444] INFO (notification:47) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [D
LM_Ready]
[2015-02-01 16:38:29 10441] INFO (notificationserver:139) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Unkn
own] to [DLM_Ready]
[2015-02-01 16:38:33 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:33 {NETWORK} net : ADD : eth4 (1)
[2015-02-01 16:38:36 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:36 {NETWORK} net : ADD : eth5 (1)
[2015-02-01 16:38:39 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:39 {NETWORK} net : ADD : eth6 (0)
[2015-02-01 16:38:42 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:42 {NETWORK} net : ADD : eth7 (1)
[2015-02-01 16:38:45 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:45 {NETWORK} net : ADD : eth0 (1)
[2015-02-01 16:38:48 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:48 {NETWORK} net : ADD : eth1 (1)
[2015-02-01 16:38:51 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:51 {NETWORK} net : ADD : eth2 (0)
[2015-02-01 16:38:54 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:54 {NETWORK} net : ADD : eth3 (1)
[2015-02-01 16:38:57 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:38:57 {NETWORK} net : ADD : bond0 (1)
[2015-02-01 16:39:00 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:00 {NETWORK} net : ADD : bond1 (1)
[2015-02-01 16:39:03 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:03 {NETWORK} net : ADD : bond1.590 (1)
[2015-02-01 16:39:06 10441] INFO (notificationserver:139) Sending notification: Feb 1 16:39:06 {NETWORK} net : ADD : bond1.90 (1)
[2015-02-01 16:40:56 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) None&c=8&s=
1422808694292&lb=p&t=2&p=%3Ccom.oracle.odof.OdofIdentifier%3E%3Clong%3E943%3C%2Flong%3E%3C%2Fcom.oracle.odof.OdofIdentifier%3E%2Ccom
pareTo%2Cjava.lang.Object%2CNone%2C5'
[2015-02-01 16:41:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:41:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:41:47 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
[2015-02-01 16:42:26 10441] INFO (notificationserver:276) Service stopped.
[2015-02-01 16:42:26 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:42:29 10441] ERROR (notificationserver:244) Error initializing notification server: 'Invalid URL Request (send) https
://10.90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1
767abc'
[2015-02-01 16:42:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:42:59 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:43:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:43:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:43:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:43:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:44:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:44:46 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
[2015-02-01 16:44:53 11242] DEBUG (service:76) call start: discover_server
[2015-02-01 16:44:54 11242] DEBUG (service:76) call complete: discover_server
[2015-02-01 16:45:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
[2015-02-01 16:45:02 10441] DEBUG (notificationserver:239) Connected to manager.
[2015-02-01 16:45:03 10441] INFO (notificationserver:267) Service started.
[2015-02-01 16:47:22 11455] DEBUG (service:76) call start: get_api_version
[2015-02-01 16:47:22 11455] DEBUG (service:76) call complete: get_api_version
[2015-02-01 16:47:22 11456] DEBUG (service:76) call start: discover_server
[2015-02-01 16:47:22 11456] DEBUG (service:76) call complete: discover_server
[2015-02-01 16:47:22 11470] DEBUG (service:76) call start: discover_hardware
[2015-02-01 16:47:23 11470] DEBUG (service:76) call complete: discover_hardware
[2015-02-01 16:47:23 11497] DEBUG (service:76) call start: discover_network
[2015-02-01 16:47:23 11497] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:47:24 11498] DEBUG (service:76) call start: discover_storage_plugins
[2015-02-01 16:47:24 11498] DEBUG (service:76) call complete: discover_storage_plugins
[2015-02-01 16:47:24 11501] DEBUG (service:74) call start: discover_physical_luns('',)
[2015-02-01 16:47:25 11501] DEBUG (service:76) call complete: discover_physical_luns
[2015-02-01 16:47:25 11523] DEBUG (service:74) call start: discover_physical_luns('360080e500036115200000b315294458d 360080e50003611
5200000b36529447cb 360080e500037683a00000b1652944694 360080e500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e5000
36115200000b315294458d 360080e500037683a00000b1a529449ac 360080e500036115200000b36529447cb 360080e500037683a00000b1652944694 360080e
500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e500037683a00000b1a529449ac',)
[2015-02-01 16:47:25 11523] DEBUG (service:76) call complete: discover_physical_luns
[2015-02-01 16:47:26 11545] DEBUG (service:76) call start: discover_repository_db
[2015-02-01 16:47:26 11545] DEBUG (service:76) call complete: discover_repository_db
[2015-02-01 16:47:26 11546] DEBUG (service:74) call start: storage_plugin_listMountPoints('oracle.ocfs2.OCFS2.OCFS2Plugin', {'status
': '', 'admin_user': '', 'admin_host': '', 'uuid': '0004fb000009000090ee9ab5a5966c67', 'total_sz': 0, 'admin_passwd': '******', 'fre
e_sz': 0, 'name': '0004fb000009000090ee9ab5a5966c67', 'access_host': '', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': []
, 'used_sz': 0, 'storage_desc': ''})
[2015-02-01 16:47:26 11546] INFO (storageplugin:109) storage_plugin_listMountPoints(oracle.ocfs2.OCFS2.OCFS2Plugin)
[2015-02-01 16:47:27 11546] DEBUG (service:76) call complete: storage_plugin_listMountPoints
[2015-02-01 16:47:27 11573] DEBUG (service:76) call start: get_yum_config
[2015-02-01 16:47:27 11573] DEBUG (service:76) call complete: get_yum_config
[2015-02-01 16:47:27 11574] DEBUG (service:76) call start: discover_cluster
[2015-02-01 16:47:27 11574] DEBUG (service:76) call complete: discover_cluster
[2015-02-01 16:48:53 11703] DEBUG (service:76) call start: discover_network
[2015-02-01 16:48:53 11703] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:48:53 11704] DEBUG (service:74) async call start: start_vm('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff93
af0676e8c83')
[2015-02-01 16:48:53 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {START
[2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {VNC}
5900
[2015-02-01 16:48:54 11706] DEBUG (base:269) async call complete: func: start_vm pid: 11706 status: 0 output:
[2015-02-01 16:48:54 11706] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 11706
[2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 11706
[2015-02-01 16:48:55 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLVNC} 6
900
[2015-02-01 16:48:55 11958] DEBUG (service:74) call start: configure_vm_ha('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff9
3af0676e8c83', True)
[2015-02-01 16:48:56 11958] DEBUG (service:76) call complete: configure_vm_ha
[2015-02-01 16:48:56 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLTTY} 7
900
[2015-02-01 16:50:01 12075] DEBUG (service:76) call start: discover_network
[2015-02-01 16:50:01 12075] DEBUG (service:76) call complete: discover_network
[2015-02-01 16:50:01 12076] DEBUG (service:74) async call start: start_vm('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d7
ad27e9d7b63')
[2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {START
[2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VNC}
5901
[2015-02-01 16:50:02 12078] DEBUG (base:269) async call complete: func: start_vm pid: 12078 status: 0 output:
[2015-02-01 16:50:02 12078] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 12078
[2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 12078
[2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLVNC} 6
901
[2015-02-01 16:50:04 12516] DEBUG (service:74) call start: configure_vm_ha('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d
7ad27e9d7b63', True)
[2015-02-01 16:50:04 12516] DEBUG (service:76) call complete: configure_vm_ha
[2015-02-01 16:50:04 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLTTY} 7
902
[2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
} VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"alive","alive"
:{"hostname":"GIS-DB-SVR1","domainName":"gloscc.gov.uk","osType":"Windows","osVersion":"Windows Server 2008 R2 Service Pack 1","kern
elVersion":"6.1.7601.18700","arch":"AMD64","guestType":"PVHVM","guestDriverVersion":"3.2.2.0","vmapiVersion":"100"}}}}
[2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
} VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"IPChange","IPC
hange":{"intrface":"Oracle VM Virtual Ethernet Adapter","mac":"0021f6000001","ipv4info":{"ipinfo":[{"address":"10.90.0.66","netmask"
:"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]},"ipv6info":{"ipinfo":[{"address":"fe80::993f:d5f4:599d:fa4%14","netma
sk":"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]}}}}} -
Hp officejet/deskjet 4625 fax function disabled after a factory reset.
Officejet/Deskjet 4625 Fax function disabled after a factory reset.
- HP 4625
- Fax function disabled after a factory reset, fax function disabled on fax machine.
Good day HP community! I have a problem on my Hp officejet/deskjet 4625 after i did a factory reset. Oh by the way my printer is on a wireless connection setup and its ip address kept on changing and became very annoying so i decided to do the factory reset. After the factory reset i visited a "teach me to how to re-setup the wireless connection for Hp officejet/deskjet 4625" i downloaded the file needed on the installation and followed the steps but I failed. Here is the LINK.
My installation failed during the "connect the usb cable from the printer to the computer" sequence. I plugged the usb cable waited patiently but after a long 30 minutes wait nothing happened. The full feature installer of the Hp officejet/deskjet 4625(OJ4620**) didnt work for me. Luckily i have a friend that had a basic installer of the Hp officejet/deskjet 4620(DJ4620**) sent me via e-mail. I wonder what is the difference between OJ4620 and DJ4620 installers were, but thanks to my friend the DJ4620 worked. I finished the installation and the wireless connection setup was successfull!
Now i can print via usb cable connection, network ssid connection & tru apple products. I just have one problem. My printer's fax function was disabled. I believe that the OJ4620 had an issue on win7 64bit OS, i also believe that the DJ4620 isnt capable on installing the fax function because it was only a basic installer.
I tried to search in the internet but to no avail, I cannot find a HP 4620 fax installer either an officejet installer nor a deskjet installer.
My machines:
Desktop - 64bit
Netbook - 64bit
Macbook Pro
Macbook Air
Hp officejet/deskjet 4625
I badly need help on the fax functions because my small office need it everyday. I hope someone can help me here. Thanks in advance!Hello theEGG.
Thank you for your detailed response. I understand after installing printer you are unable to use your Fax features. Any HP printer full feature software package already comes with the fax features.
Please uninstall your software. I am going to provide a HP document to help you: Uninstall The Software. After this progress is done please move onto the next step: (This is only for your Windows computers)
How to clean Temp Folder. In this document there is two ways to clean out the Temp folder. Please choose which option you are conformable with.
To install the software, please use the:Printer Install Wizard. Make sure you leave the USB cord out of the computer until it props you to insert the USB cord.
If you have any other questions please let me know.
Ashley
I worked on behalf of HP. -
Can't connect to Easy VPN Server using Windows 7 inbuilt VPN client
Hi Everyone,
I would like your help to resolve a vpn issue I am having with my Windows 7 inbuilt vpn client. I am trying to connect to an Easy vpn server on a Cisco 2951 ISR G2. Well, I can connect using Cisco vpn client v5.07 but I can't connect using Windows 7 inbuilt vpn client. Is there any configuration that I am missing so that I can connect using Windows 7 inbuilt vpn client to connect to the vpn server?
Thank you.Hi MindaugasKa,
Base on your description, your case must is the NPS client can’t pass the NPS policy.
The NPS client can’t connect the network may have many reason, such as the Network Access Protection Agent service not started successful, the certificate not issued properly,
please offer us information when your Windows 7 client denied, such as event id, original error information, screenshot.
More information:
Extensible Authentication Protocol (EAP) Settings for Network Access
http://technet.microsoft.com/en-us/library/hh945104.aspx
Network Access Protection in NPS
http://msdn.microsoft.com/en-us/library/cc754378.aspx
Appendix A: NAP Requirements
http://technet.microsoft.com/en-us/library/dd125301(v=ws.10).aspx
802.1X Authenticated Wireless Access Overview
http://technet.microsoft.com/en-us/library/hh994700.aspx
Connecting to Wireless Networks with Windows 7
http://technet.microsoft.com/library/ff802404.aspx
The related thread:
NPS 2012 rejects windows 7 clients after upgrade from 2008 R2. Requested EAP methods not available
http://social.technet.microsoft.com/Forums/windowsserver/en-US/44af171f-6155-4f2e-b6c7-f89a2d755908/nps-2012-rejects-windows-7-clients-after-upgrade-from-2008-r2-requested-eap-methods-not-available?forum=winserverNAP
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
User login items dissappear after shut down
Ya i dont understand why it does this i load up a prog that i want to start on start up and after i restart it doesnt and i go back to the startup item page and its empty...i worked once but then the next time i started up it was gone. The only thing i think it cold be is that maybe it might dissappear after i have gone into windows and turned off the computer and then go back to apple later
any ideas would be appreciated
AndrewHi Jayne, and a warm welcome to the forums!
Has anybody else had access to your Mac lately?
Have you tried your shortname & Password?
If that doesn't work we may need to try this...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one. -
Microsoft Store Breaks After Joining Domain (2008)
After joining a Windows 8 Pro Tablet to domain, store apps are no longer working.
This is important to us for two reasons :
1) Users must be able to use OneNote and Photo Apps
2) Users must be able to access Domain shares and have access to the same files as his regular workstation
All of this regardless of what user logs in.
Currently active COMPUTER GPO :
Enable Offline Files
Enable Remote Desktop
Local Admin Group to Domain Users
NTP Client configuration
Trusted Zones (Local Intranet/Shared Paths)
Currently Active USER GPO :
Map network Drives
Create Folder Structure at logo on server (VBS)
Folder Redirection (Desktop and Documents to Server. Favorites, Music, pictures and Video follow Documents)
I've tried a few tricks found on google and technet, but I seem to only regain partial and temporary access to the store. Apps will open and close immediately (Store/Camera for example).
Any suggestions would be appreciated and thank your for your time!Hi,
If this issue occurs just after joining domain, you need check this policy:
Computer Configuration/Windows Components/Store/Turn off the Store application
If it is not this case, we can re-register Windows Store for a test:
Fix Store App in Windows 8.1
http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx
Alex Zhao
TechNet Community Support -
Audigy LS stops random and functions properly after reboot
:Audigy LS stops random and functions properly after rebootM I am on a P5P800 motherboard with a SB Audigy LS in PCI2, running Windows 7 Beta and using version 5.2..200 of the driver.
I had the same problem on Windows Vista (both before and afer SP):
? at irregular intervals the sound card stops working. Mediamonkey does not detect the SB speakers anymore and none of the other programs can get audio to play.
All it takes is a system-reboot.
I know there is a later version of the driver, at least drivermax tells me there is a newer version. Trying to install this newer version results in the blue screen.
Any ideas where to look for the solution: I am sure that the chipset drivers are fine and I also tried switching the sound-card in from PCI3 to PCI2.
Help is wellcome: it is annoying most to have no sound randomly !Restart the computer.
-
Help.... can anyone advise why my facetime apps on my iphone 4S dissappeared
after upgrading to iOS6 ....... ????Yea, there is no standalone app for facetime. Select a contact, and at the bottom is an option to facetime call
There is an app that is free called facedial for facetime
By the way, there is a free IOS 6 book available for download in the Apple bookstore. -
I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.
If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.
Maybe you are looking for
-
Apple logo comes up but ipod doesn't start
When I turn on the device the Apple logo comes up but the ipod doesn't start and go to the menus it just stays with the logo. When I hold down the play/pause on the click wheel to put it to sleep a symbol of a triangle with an exclamation point in th
-
When I open Pages and get a blank page, the curser is no longer working. Meaning, I am now unable to type a document as there's no place to begin. Never had this happen before. Interestingly, if I create a text box, I AM able to type, but not with
-
When I installed Firefox on my new computer, it came with a new thing called incredimail and My Start. It screwed up everything, making it impossible to restore my settings. I deleted Incredimail using the Control Panel but My Start continues to uplo
-
Photos limited in shared photo stream in a album
As topics, also how many recipients is max. if the shared photo stream album which is not public? Thanks:)
-
Problem installing weblogic server 8.11
I have a problem while installing weblogic server 8.11 on a solaris 9 machine. I use the following instruction: ./filename.bin and I see the following message: Illegal instruction (memory dumped) (in french: instruction incorrecte (vidage memoire)) A