Windows 8.1 wake problems on MBA using latest Boot Camp drivers?

I'm using the latest Boot Camp drivers: 5.0.5033 and when the mac goes to sleep I can't wake it. Either auto sleep or manual sleep, it won't wake until I hard reset the mac. Please help? Do I need newer boot camp drivers? These are the newest drivers on the website, so... Do I need to wait for Apple to release new drivers?

there currently are not newer drivers apple does not officially support 8.1 so we're in the wild west in terms of if things works
live it with and wait for official support
or
reinstall win8

Similar Messages

Sound in xp using latest boot camp drivers

Hey all - I have a problem in xp that I am wondering if anyone else has...
I cannot get sound out of the "line out" (I have the computer hooked up to speakers). I can only get sound out of the headphone jack - and NEVER get the sound out of the front (internal) speaker in xp. Anyone know what's going on?
I have looked at the RealTek controls, and I can't seem to select or otherwise enable the "line out" or internal speaker. I'm lost - anyone have any help for me? Thanks!

I found something that may be helpfull... I email this guy who is an expert on drivers for boot camp- this is the discussion so far...
On Sep 6, 2007, at 22:42 , Brandon Coppin wrote:
Hey Makel,
After hours of searching I finally found a useful website... yours.
I recently purchased a new 24" imac with 2.8ghz extreme, 4gigs of ram
and the ati radeon 2600 with 256mb memory. I installed windows xp and
the so-called Macintosh drivers cd... the sound is echoing really bad
and very patchy. The video card appears to be operating normally most
of the time- until I try to play a video in media
player- it only shows shades of blue... Also Simcity 4 runs far more
slowly than it should on a system of this caliber. Do you have any
suggestions for drivers or any other insights. I really appreciate
your input,
Brandon Coppin
Hi Brandon,
I'm glad you found my article on Boot Camp drivers useful. Keep in mind I only have experience with MacBook Pros and Boot Camp, but I think I have a few pointers for you which can get you back up and running. Regarding your system spec, remember that unless you're running Windows 64bit (Vista or XP) you will not get the full benefit of those 4 gigs of ram - the most you'll see is a bit over 3 gigs. If you are running a 64bit version of Windows, stop, wipe it clean and start over with a 32bit version.
Your assumption that the iMac running XP should be a 'screamer' is correct. If SimCity 4 isn't isn't blazing fast, there's something iffy going on. First thing you should do is grab the latest driver release for your Radeon 2600. You can download those here: http:// ati.amd.com/support/drivers/xp/radeonx-xp.html
Regarding your other driver issues, I would suggest skipping the Boot Camp installer and do the driver installation manually. You'll need to know what's actually inside your system, and to do this you'll need a utility to analyze the hardware. I recommend SiSoft Sandra (http://www.sisoftware.co.uk/index.html?
dir=&location=pinformation&langx=en&a), there's a free version available for download.
Once you know what's inside your new iMac (because to be honest, I
don't) you can selectively install the drivers that Apple provides you with via the Boot Camp Assistant.
Before doing this though, nuke the Windows install you currently have and start fresh.
I hope that clears up your problems, let me know if it does, or if there's any other snags you come across.
Cheers,
Niels Mäkel
[email protected]

Can install Windows 7 Pro, but not Boot Camp drivers

I have used Boot Camp assistant to install Windows 7 Pro (64 bit), and built the USB drive with Boot Camp drivers.
Installed on a separate drive on my Mac Pro.
When I install the drivers and reboot, I get an error. Basically Windows says there is an error and it needs to run System Restore in order to roll back to the previous status (ie. remove Boot Camp drivers).
I am using the latest Boot Camp drivers for a Mac Pro (4,1) and 64 bit Windows.
I tried downloading the drivers from Apple's website in Windows, unzipped and installed - same issue.
Windows is not yet registered.... (might that be an issue?)
Grateful for some ideas. I have previously had Win7 running on this machine, and even Win 8 (which crashed - necessitating a roll back to Win 7 whcih is nicer).
TIA

the drivers have a root setup.exe if people have problems with that they can manually navigate to the sub dirs and run the driver installs for the various hardware manually
the various driver exe install will only install if they detect the hardware is there so it's safe to run installers for say a video card ones computer does not have
and if one of the driver don't work of the hardware related to it is defect in some way you can identify which one as the restore would happen right over that driver install
that windows is not registered should not play apart as far as I know

Installing Windows 7 Without Using The Boot Camp Installer (MacBook Pro)

I don't know if anyone knows this or not, but I was able to install Windows 7 on my MacBook Pro just using the Windows 7 install disk.
I restarted with the windows CD in, and when the screen said press any key to boot from CD, I pressed the space bar. When it got to the part to select the installation drive, I went into advanced and removed all the partitions and formatted the whole thing. There was a small system partition the cannot be deleted (probably reserved for the system). I was able to install Windows 7 and use the whole drive for it.
After running Windows 7, I was still able to install the Boot Camp Control Panel to set the keyboard, track pad, sound, and all the other funtions. If I tell it to reboot to the Apple OS, it just reboots to Window 7 with no problems.
Anyway, I thought it was pretty cool and might be helpful for people who want to run only Widows 7 on their MacBook Pro.
CAUTION... DO THIS AT YOUR OWN RISK!!!

People have been using Mac as Windows-only.
On Mac Pro, with 4 internal drives, it is normal to not use anything other than the Windows DVD and install onto a dedicated drive, same as you did, only change it from GPT to MBR first.
There is no risk.
(Well, some feel that someone might 'need' OS X to do something like a firmware update I guess.)

I am trying to install Windows XP Professional using Apple Boot Camp.

I partioned the hard drive using Apple Boot Camp. Inserted with Windows XP disk into CD drive and hit Start Installation. I got a black screen with blinking white underline in top left corner. Computer will not do anything. What do I do now?

http://www.microcenter.com/category/4294967276,4294965769/Microsoft-Operating%20 Systems
Decent prices, there.
Things to note: 32-bit XP only recognizes 3.5 GB RAM. 64-bit XP Home recognizes 16 GB RAM. 64-bit Pro recognizes 192 GB RAM.
If you have Core2Duo or better processor you have 64-bit system.
Darn to heck ... XP is needed. Sorry.

How much does windows 7 version that is used with boot camp?

hello everybody
combien coute une version windows 7 que l'on utilise avec boot camp?
how much does windows 7 version that is used with boot camp?
thanks

Wait for Windows 8 2012-10-25 and use the free Preview or Trial version for now is another option.
Windows 8:
http://msdn.microsoft.com/en-us/windows/apps/default
https://blogs.msdn.com/b/b8/
http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/

HT1846 I tried to download latest windows support using the boot camp , but the download stopped beacause of a network proplem , can you help?!

I tried to download latest windows support using the boot camp , but the download stopped beacause of a network proplem , can you help?!

I have the same issues. I keep getting a "network error" even though my connections are fine. I have installed Bootcamp fine on another Macbook, but am having major issues with my brand new one. I have read the support forums where they say to keep trying because the servers are notoriously slow, but this seems a little ridiculous. Hope I can get some help as well.
Thanks!

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
If you can reply with the brand and model of printer you have then we may be able to provide more information.

Which version of Windows to use with boot camp & Lion?

Which version of Windows can I use with Boot Camp and Lion 10.7.1?
Don't want to run Parallel or any other 3rd party program.
Thanks.

Windows 7

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

Dear Nathan,
Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it. The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see how much I can learn.
I appreciate your interest in this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
In any case, many thanks, Paul

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

Windows 8.1 Not Working Properly after Updating Boot Camp Drivers to 5.1

Hi all!
Recently I had a problem with the sound in Windows 8.1 using BC v5. That problem was resolved by updating the Boot Camp Drivers to 5.1. Now I've more problems than before.
1. Some service are not loading at all at the startup (which did before)
The Boot Camp service is not loading automatically at startup, other Windows Services are not loading at the startup after updating the Boot Camp Drivers (Windows Update)
2. Microsoft Office cannot verify license for the product.
This problem is due to the services that won't start automatically. I can't even do a repair of MS Office 2013... Even though it's a legal version of MS Office.
There are many many more problems I think... I just haven't discovered them yet which is very very annoying. When I was using Windows 8.1 with the Boot Camp Drivers version 5 there were few bugs than now...
Please is there any notice of these errors? Or am I the only one who is experiencing these errors??? Please give me some answers!
Thanks in advance!!

I updated them by downloading the zip file from the Apple site...
I've just updated Mac OS X and it seems that this was the solution... Everything works fine! (For now)

Windows 8 crashes and with the error "kernel_security_check_failure" after installing Boot Camp drivers.

Hi!
I've got a new 27" iMac (late 2013), and I was going to install Windows 8.1 (64-bit) to be able to play a few games.
Everything went smoothly (installed normally via Boot Camp Assistant), and after the Windows setup, the Boot Camp drivers needed to be installed. After this, the computer rebooted, but crashed at a blue screen with the error called "kernel_security_check_failure".
It rebooted a few times on its own, but after a few times, I got some options, and I chose to "refresh" the Windows 8 install, meaning it would reset the install while keeping my files (even though I didn't have any, as I never got to use it). This took some time, but it worked, and it booted into W8.
The Boot Camp drivers had been removed though, so I had to reinstall them. After they had reinstalled, the computer rebooted and the same blue screen with the same error hit me.
Something tells me that some of the BC drivers are messing things up. I can't find any information on this elsewhere.
Would it be possible to install only selected drivers, to eventually find out which driver is causing the problem?
All help is greatly appreciated!

I finally gave up, reloaded everything, this time, using WIn 8.1 Pro, not Enterprise. After I did the updates, patches, Norton 360, shut computer down and connected the external drives, and booted up...and got the BSOD. This time, I went to Microsoft and downloaded the Windows Debugger, and think I may have found the problem...NORTON!
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Am conrtacting them, but, here's the Debugger output:
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Dump\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff802`0f87e000 PsLoadedModuleList = 0xfffff802`0fb482d0
Debug session time: Tue Jun 17 00:48:52.131 2014 (UTC - 6:00)
System Uptime: 0 days 0:03:09.864
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 139, {3, ffffd0002852d3e0, ffffd0002852d338, 0}
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMDS64.SYS ( SYMDS64+71be6 )
Followup: MachineOwner
6: kd> !analyze -v
*                        Bugcheck Analysis                                    *
KERNEL_SECURITY_CHECK_FAILURE (139)
A kernel component has corrupted a critical data structure. The corruption
could potentially allow a malicious user to gain control of this machine.
Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd0002852d3e0, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd0002852d338, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
Debugging Details:
TRAP_FRAME: ffffd0002852d3e0 -- (.trap 0xffffd0002852d3e0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=ffffe00059c129f0 rbx=0000000000000000 rcx=0000000000000003
rdx=ffffe0005718d2a0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8020f9e8cdb rsp=ffffd0002852d570 rbp=0000000000000000
r8=0000000000005aa0 r9=00000000000007ff r10=ffffd00066cc8000
r11=ffffe00059963040 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na pe cy
nt! ?? ::FNODOBFM::`string'+0x682b:
fffff802`0f9e8cdb cd29            int     29h
Resetting default scope
EXCEPTION_RECORD: ffffd0002852d338 -- (.exr 0xffffd0002852d338)
ExceptionAddress: fffff8020f9e8cdb (nt! ?? ::FNODOBFM::`string'+0x000000000000682b)
   ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: 0000000000000003
DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT
BUGCHECK_STR: 0x139
PROCESS_NAME: System
CURRENT_IRQL: 2
ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
EXCEPTION_PARAMETER1: 0000000000000003
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff8020f9ddae9 to fffff8020f9d1fa0
STACK_TEXT:
ffffd000`2852d0b8 fffff802`0f9ddae9 : 00000000`00000139 00000000`00000003 ffffd000`2852d3e0 ffffd000`2852d338 : nt!KeBugCheckEx
ffffd000`2852d0c0 fffff802`0f9dde10 : ffffe000`59c8cc40 00000000`00000000 ffffe000`54b71040 fffff800`1d6d40b6 : nt!KiBugCheckDispatch+0x69
ffffd000`2852d200 fffff802`0f9dd034 : 00000000`00000000 00000000`00000000 ffff6d2d`50094127 fffff802`0f81458f : nt!KiFastFailDispatch+0xd0
ffffd000`2852d3e0 fffff802`0f9e8cdb : ffffc000`061df4e0 ffffc000`061df4e0 ffffc000`061dfbf8 00000000`00000000 : nt!KiRaiseSecurityCheckFailure+0xf4
ffffd000`2852d570 fffff800`1d7a0be6 : ffffe000`59e10120 fffff800`1d794388 ffffe000`54dfe9c8 fffff800`1d735f7c : nt! ?? ::FNODOBFM::`string'+0x682b
ffffd000`2852d5a0 fffff800`1d7a54e2 : ffffc000`061df4e0 ffffc000`061dfbf8 ffffc000`061df550 fffff800`1d7367ea : SYMDS64+0x71be6
ffffd000`2852d5d0 fffff800`1d737f20 : ffffc000`061df378 ffffc000`061dfbf8 00000000`00000000 ffffc000`05a9bf18 : SYMDS64+0x764e2
ffffd000`2852d620 fffff800`1d73e171 : ffffc000`051e6a88 ffffc000`05a9bf18 ffffc000`05a9bf18 ffffe000`5988cb00 : SYMDS64+0x8f20
ffffd000`2852d650 fffff800`1d782027 : ffffc000`061ea018 00000000`00000000 ffffe000`58409008 fffff800`1d794388 : SYMDS64+0xf171
ffffd000`2852d680 fffff800`1d79af21 : ffffc000`061ea018 ffffd000`2852d8c9 ffffe000`58409008 00000000`10000004 : SYMDS64+0x53027
ffffd000`2852d6c0 fffff800`1d9a3bb3 : ffffe000`58409078 fffff800`1d98b3e8 ffffe000`58409008 ffffd000`2852d8c9 : SYMDS64+0x6bf21
ffffd000`2852d6f0 fffff800`1d9a91fa : ffffe000`5840a1a8 ffffe000`58409008 00000000`00000000 ffffe000`00000000 : SYMEFA64+0xe9bb3
ffffd000`2852d720 fffff800`1d9ae015 : 00000000`00000000 00000000`00000000 ffffd000`2852d8c9 ffffe000`58a10e60 : SYMEFA64+0xef1fa
ffffd000`2852d760 fffff800`1d9adf4c : 00000000`01820201 ffffe000`58a10e60 ffffe000`58a10e60 ffffe000`58a10be0 : SYMEFA64+0xf4015
ffffd000`2852d790 fffff800`1d9b294c : ffffe000`59e0a150 ffffe000`58a10e60 ffffe000`5988ca80 ffffe000`58a10e60 : SYMEFA64+0xf3f4c
ffffd000`2852d7c0 fffff800`1d9a2435 : ffffd000`2852d8a0 ffffe000`599a4010 ffffd000`00000000 ffffe000`59e0a010 : SYMEFA64+0xf894c
ffffd000`2852d7f0 fffff800`1d6d528a : 00000000`00000000 ffffe000`59e0a070 ffffe000`5604e300 ffffe000`58a10e60 : SYMEFA64+0xe8435
ffffd000`2852d820 fffff800`1d71bf76 : ffffd000`2852d960 00000000`00000000 ffffe000`5604f900 ffffe000`571dab10 : fltmgr!FltpPerformPreCallbacks+0x31a
ffffd000`2852d930 fffff800`1d6d413a : ffffe000`57170dd0 ffffe000`571dabd0 ffffe000`59cf18c0 fffff802`0fd411a7 : fltmgr!FltpProcessShutdownRequest+0x122
ffffd000`2852d9b0 fffff802`0fbf7518 : ffffe000`57170dd0 00000000`00000001 ffffe000`571dabd0 fffff802`0fb54a90 : fltmgr!FltpDispatch+0x13a
ffffd000`2852da10 fffff802`0fbf7273 : 00000000`00000001 00000000`00000000 00000000`00000001 00000000`00000000 : nt!IopShutdownBaseFileSystems+0xb8
ffffd000`2852da90 fffff802`0fbfb722 : fffff802`0fbfb4b0 00000000`00000000 ffffe000`59963040 ffffe000`59963040 : nt!IoShutdownSystem+0x127
ffffd000`2852db10 fffff802`0f8d1adb : fffff802`0fbfb4b0 ffffd000`2852dbd0 00000000`00000000 ffffe000`59963040 : nt!PopGracefulShutdown+0x272
ffffd000`2852db50 fffff802`0f94d794 : ffffe000`59965800 ffffe000`59963040 ffffe000`59963040 ffffe000`54b71040 : nt!ExpWorkerThread+0x293
ffffd000`2852dc00 fffff802`0f9d85c6 : ffffd000`66c40180 ffffe000`59963040 ffffe000`59965800 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`2852dc60 00000000`00000000 : ffffd000`2852e000 ffffd000`28528000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMDS64+71be6
fffff800`1d7a0be6 33d2            xor     edx,edx
SYMBOL_STACK_INDEX: 5
SYMBOL_NAME: SYMDS64+71be6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMDS64
IMAGE_NAME: SYMDS64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 51f84c44
FAILURE_BUCKET_ID: 0x139_3_SYMDS64+71be6
BUCKET_ID: 0x139_3_SYMDS64+71be6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x139_3_symds64+71be6
FAILURE_ID_HASH: {bf9be68b-5f04-08d4-3152-3d420dc362f6}
Followup: MachineOwner

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Windows 7 Build 7100 (release candidate): Boot Camp drivers not compatible?

I had a go at installing Windows 7 Build 7100 on my MacBook (aluminium) via Boot Camp. Windows 7 installed fine, but the Boot Camp drivers of the chipset and DVD drive don't seem to work.
I'll have a look at Intel's website for the chipset driver, but what's really annoying me is that I can't eject my optical discs.
Anyone else tried 7100 yet? I had none of the above problems in build 7000.

Tried 7077. A word or two of caution, these (Apple Boot Camp) is known to cause problems and was blocked.
Programs and drivers/installers that worked previously aren't, but that is the purpose of an RC.
Also, Apple iTunes has used GEAR drivers which have also disabled optical drives in the past and may do so again.
*What you will see when a program is incompatible:*
this has been formalized with an appearance by the familiar Program Compatibility Assistant window shown here.
http://community.winsupersite.com/blogs/paul/archive/2009/04/25/security-softwar e-changes-in-windows-7-rc.aspx
Everything works well except Apple TimeServices when you change OS; OSSwitcher (control panel "Boot Camp" to change the default boot OS). Otherwise 7077 has run smooth, fewer problems than Vista (including SP1 and SP2(RC), and definitely much much better than build 7000.

Windows 8.1 wake problems on MBA using latest Boot Camp drivers?

Similar Messages

Maybe you are looking for