Windows 8.1 will not keep the correct time on Dell PC - Clock worked fine when the machine had Windows 7 as OS.

I can set it manually or by Internet time sync but it does not keep time or update again from the Internet automatically.
Another real time wasting feature of Windows 8? Gosh Microsoft, I really need to get some productive work done!

Hi,
Meanwhile, you can also re-register time service in your Windows 8.1 system as a test
Open commmand prompt
In the Command window type net stop w32time
Type w32tm /unregister
Type w32tm /register
Type net start w32time
Check whether the time in your BIOS is correct.
If the Windows 8.1 and Windows 7 use different machines, and this issue only happened after you shut down your Windows 8.1 machine, then it might be the CMOS battery issue in your Windows 8.1 machine, you can consider to change a cmos battery.
Yolanda Zhu
TechNet Community Support

Similar Messages

My Bose Companion 5 speakers are not getting detected in mac pro. They are working fine with other machines (including mac).

My bose companion 5 speakers are not getting detected on Mac Pro. They are working fine with other machines (including friend's mac)

Same Issue here. I had a similar issue with my Bose USB speakers when I upgraded to Maverick. I've had the speakers since 2010 and had no issue with my 2006 Mac Pro or my iMac till the Maverick upgrade, contacted both Apple and Bose with no luck but an Apple update fixed the issue.
I wonder if other USB speakers have an issue or is it just BOSE USB speakers. But my Companions did work fine with my Mac Pro and iMac 27 till the Yosemite update with an initial issue with the Maverick upgrade it was definitely an Apple issue not Bose. I have both Boise Airplay and Blue tooth speakers that seem OK it is only the USB Companions that don't work.
Will look forward to a solution.
Thanks,
Rich

I get the question mark in the folder on start up, but if i connect the same hard drive via usb it works fine is the hard drive faulty?

but if i connect the same hard drive via usb it works fine is the hard drive faulty?

It sort of sounds like a startup disk issue. Have you tried starting up holding down the "Option" key? This should generally give you the option of which drive you want to boot from after a few seconds. Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive. If it can't find it, it just sort of hangs there. Try holding down the "Option" key and see if your internal drive is shown as an option. If it is, select it. If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).

Got wet while walking home in the rain it looks like everything is working fine except the touch screen ?can someone point me in the right direction to solve this problem or to get it fixed!

Got wet walking home in the rain it looks like everything is working fine except the touch screen wont work. Can anybody point me in the right direction to solve this problem, or who to talk to about getting it fixed???

Do not use, charge or turn on your iPod until it is dry:
How to fix a wet iPod or iPhone | eHow.com

TS1424 i downloaded an album from i tunes, but it will not play back correctly,tracks stop half way through and skip to the next one. what can i do???

I downloaded an album from i tunes, but it will not play back correctly,
it starts a track and then stops randomly and jumps to the next track
and then does the same thing ad ainfinitum! What to do??

Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and use the 'Report a Problem' link.

I am having trouble installing itunes. I get so far and it will not finish installing Quick time. Error %appdata%/ what does this mean? We had itunes before and it vanished? I have Windows 7 and explorer 9

I having trouble reinstalling itunes. I have windows 7 and explorer 9. Keep getting as for as itunes installed and it will not finish installing Quick time.also, keep getting error message "could not find location %appdata%/. What does this mean?

http://www.apple.com/support/itunes/contact/

My new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine

my new iPhone 6 will not pair with BMW. Previous iPhones have always worked fine

Hi, thanks for the reply - it's on 8.1 already!

When trying to save a bookmark to a specific pre-established folder the window disappears and will not allow me to make a selection. If I hover in the area it will flash on the screen and disappear again, it's annoying please help!

When I attempt to save a new bookmark and want to save it in a folder the window that typically appears just below the address bar will not stay on the screen. It flashes on the screen and as soon as I move my cursor over it, it disappears. It will not allow me to make a selection of any kind. If I randomly hover over the general area the window will flash back in view but disappear again just as quickly. If I then show all my bookmarks, the bookmark was saved and I have to move it to the folder I actually want it in. Just a few extra steps, but still very annoying. Please help!

DID YOU FIND A SOLUTION???I HAVE TH ASAME THING AS WELL

Windows Phone 8 Lync 2013 will not sign in. Although Apple and Android mobility works fine.

Hey everyone,
I have a fully functional Lync deployment as it seems so far. However, the only thing that refuses to connect successfully is the Windows phone 8 lync 2013 mobile app. It keeps getting the general "Can't sign in" error.
I've read that if the SAN lyncdiscover.domain.com does not exist on the certificate that is being used by the External Web Site, then this will happen. The cert I'm using is an internal published certificate from my internal CA, the SAN lyncdiscover.domain.com
and lyncdiscoverinternal.domain.com is added.
My public cert on the RP / public facing side of the Edge is a go daddy cert. This cert does NOT have the lyncdiscover / lyncdiscoverinternal SANs added to it. I am currently unable to get my manager to purchase a new cert with this included because this
Lync deployment is really just for testing and there is no point in buying a new cert just for this one piece.
So in result, I am forcing the lyncdiscover to fail over to HTTP 80 traffic instead of 443; and this works great. My Android and iOS clients are able to connect fine but every windows phone in my environment are not working.
I have tried turning off auto-detect server and manually putting in
https://lync.domain.com/autodiscover/autodiscoverservice.svc/root
as the internal and external addresses on the phone settings, but this does not work either.
I am running the latest updates from the January 2014 update on my servers.
When I turn logging on within the device, I repeatedly see these errors in the logs:
ERROR UTILITIES CHttpConnection.cpp/1113:Request failed with the WININET errorCode (UcwaAutoDiscoveryRequest): -2147467260
ERROR TRANSPORT CMetaDataManager.cpp/591:Unable to get a response to an unauthenticated get to url https://lync.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
Now, this may or may not be normal due to me forcing the lyncdiscover to fail over to HTTP 80.
If anyone has any ideas or needs any more information please let me know.

Please check the Authentication Delegation is set to No delegation, but client may authenticate directly when you create a web server publishing for Lync Server Web Service.
Lisa Zheng
TechNet Community Support

My mac app store cannot get a secure connection although my internet is fine and i have the correct time and date. I cannot get onto the app store to update. It just keeps saying cannot make a secure connection do i want to continue anyway

see above

This procedure is complicated, but you probably won't have to do all of it.
Take each of the following steps that you haven't already tried until the issue is resolved. Back up all data before making any changes.
Step 1
Check the status of the service. If it's down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Check that the date (including the year) and time shown by your system clock are correct.
Step 3
Restart your router and your broadband device, if they're separate.
Step 4
If you connect to the Internet through an HTTPS or SOCKS proxy server, follow the instructions in this support article, or deselect the proxy entirely.
Step 5
Boot in safe mode and test.
Step 6
Make sure Parental Controls aren't active for your account.
Step 7
Follow the instructions in this support article to change your DNS settings. If there's no change, revert the settings.
Step 8
If possible, test on a different network, such as a public Wi-Fi hotspot or the cellular network of your phone.
Step 9
Launch the Keychain Access application. In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings. Never again change any of those settings.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Next, select the login keychain. Delete any expired or otherwise invalid certificates.
Log out, log back in, and test.
Step 10
Launch the Activity Monitor application. Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, back up all data, then triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Move all the files in the folder that opens to the Trash. You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.
Step 11
If you've moved to a different country, select
Store ▹ View My Account
from the App Store menu bar, then click
Change Country or Region
and update your billing information.

LG Octane will not keep Daylight Savings Time

My cellphone will not go forward one hour when DST began on March 9, 2014. I've tried rebooting the phone, and it momentarily went forward one hour, but several minutes it reverted back to the old hour.
Two days later, my cellphone still can't decide to keep DST. It keeps going back and forth between 7:00am and 8:00am, so I wonder what is up with that.

I have the same problem.....I tried *228 - it worked momentarily then reverted back an hour again. Frustrating.....

Suddenly firefox will not open unless I turn off my firewall (thru McAfee). When the firewall is on, I get an error messsage that it cannot connect to the server. Any thoughts? Thanks

when opening firefox, the connection goes to www.aol.com, and the eror states it cannot establish the connection. I am not comfortable with on-line banking to leave the firewall off, and this was never a problem until last night.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

After a crash and update firefox will not connect to any webpages. Internet explorer is working fine. What's going on?

Firefox crashed. Closed all my windows - did the auto update thingy with accompanying message. Brought up the windows that had closed as usual - all said "problem loading page". Firefox will now not connect to internet. It's not a problem with my connection etc - internet explorer is working fine. Anyone else have this problem today?

So, it's been 13 hours now and no answers. From reading the Airport Discussion board "
Airport has a self assigned IP address, 169.254.175.198 and will not be able to connect to the internet"
is a very common problem and I find it hard to believe Apple has not responded with a fix. I may have to take it into a Genius Bar and see what they can do but I do not have high hopes.
You know, I was talking to someone last week and the name Apple came up. "Ah", he said, "the Evil Empire". Their success has made them much more brash than MS ever was.

TS4425 I tried this on my iPad. The but did not get any terms and conditions. Photo stream works fine on the iPad but not on Apple TV. What do I do?

Followed the instructions but they don't work. On the iPad I got no new T&Cs and it works fine. So I have no means to agree the new T&Cs and because of that it does not work on Apple TV.

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Windows 8.1 will not keep the correct time on Dell PC - Clock worked fine when the machine had Windows 7 as OS.

Similar Messages

Maybe you are looking for