Windows 8.1 will not recognise my buffalo removable hard drive

the hard drive worked until I had my laptop camera fixed & they have removed the driver & now it wont recognise it at all

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Similar Messages

  • Windows 7 installation will not recognise the Bootcamp disc!

    I have a 2008 Macbook running Snow leopard.
    Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
    Any ideas
    Thanks in advance

    If you used your Leopard DVD then it won't work.
    As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
    Stefan

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

  • Illustrator Cs5 will not open.  Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    Illustrator Cs5 will not open.  Recently upgraded hard drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    gj,
    Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Elements 5.0 will not download photos onto our hard drive into folders, only individually.    *

    Elements 5.0 will not download photos onto our hard drive into folders, only individually. We have recently changed to Win 7.

    Sorry – I was having trouble using the forum and accidentally doubled up.  Thanks for your suggestion.  We will give it a go.

  • Itunes will not store in an external hard drive

    I use an external hard drive to store my music.
    The last few CDs we have put onto itunes do not appear in the external hard drive, why?

    Hello compsec1951,
    It sounds like the content may have been saved in the default iTunes folder location in the Music folder.
    Use this article to determine how iTunes is setup and where it is saving the new content. While it may be accessing the library on the external drive, it may be saving new media to a different location.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Mac OS X: Click the iTunes menu and choose Preferences.
    Windows: Click the Edit menu and choose Preferences.
    Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
    You can then:
    Note where your media folder is, such as for backing up your media.
    Use the Reset button to reset it's location to the default (which is the iTunes folder).
    Click the Change button to select a folder for a new location. Once you change this location:
    If you make a new or alternate iTunes library, the new location will be used by that library.
    Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
    Regards,
    Sterling

  • My macbook pro will not recognize my Seagate external hard drive.

    Last night it was working fine, but I noticed that  every time I plug in my hard drive there is a bunch of files in my trash bin.  I tried to delete them and my trash bin goes into the negatives and never stops.  I tried dragging those files from the trash bin into the shredder on mackeeper, but that did not work.  I then gave up on trying to delete the files and went to bed.  I woke up and now my hard drive does not work.  It still glows but nothing comes up on the screen.  I plugged it in my brothers computer which is windows and it recognized it (It started to install the hard drive on his computer, so I stopped it).  I also recently removed programs/ applications like ichat, garage band,  and other applications that I never used on my computer.  Just wondering what I need to do to get this to work because all my school stuff is on the hard drive.  And I tried a new cable and it still does not show up.  Please help.
    I guess never mind, literally 25 seconds after I posted this message, all of the sudden it recognized my hard drive.  I hope it does not take this long for it to recognize it everytime I use my computer.

    I suggest you delete Mackeeper and do not use the Mackeeper uninstaller.  Look at some of the discussions on this forum and you will understand that it is at best a nuisance and at worst malware that has a negative impact on the performance of your MBP.  Here are instructions that you may use to get rid of it:
    http://applehelpwriter.com/2011/09/
    Ciao.

  • Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one

    I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
    to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
    Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
    the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
    appreciated.
    PS I have no idea which forum this should go under, so pretty much just picked one randomly.

    Thank you for the reply. Below is the diagnostic report:
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0x8004FE21
    Cached Online Validation Code: 0x0
    Windows Product Key: *****-*****-*****-*****-XVH7B
    Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
    Windows Product ID: 55041-011-1350732-86681
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_gdr.130828-1532
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 100 Genuine
    Microsoft Office Enterprise 2007 - 100 Genuine
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
    File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
    File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
    Inc.</Manufacturer><Model>Latitude E4300                  </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
    major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL 
    </OEMID><OEMTableID>M09    </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
    Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
    Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
    Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>  
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
    Installation ID: 017002020180881956515246274583104396790522223804443953
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: XVH7B
    License Status: Licensed
    Remaining Windows rearm count: 3
    Trusted time: 6/6/2014 2:38:03 PM
    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: N/A
    HealthStatus: 0x000000000001EFF0
    Event Time Stamp: 5:30:2014 15:10
    ActiveX: Registered, Version: 7.1.7600.16395
    Admin Service: Registered, Version: 7.1.7600.16395
    HealthStatus Bitmask Output:
    Tampered File: %systemroot%\system32\sppobjs.dll
    Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Tampered File: %systemroot%\system32\sppwinob.dll
    Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
    Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
    Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Tampered File: %systemroot%\system32\drivers\spsys.sys
    HWID Data-->
    HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes
    Windows marker version: 0x20001
    OEMID and OEMTableID Consistent: yes
    BIOS Information:
      ACPI Table Name    OEMID Value    OEMTableID Value
      APIC            DELL          M09    
      FACP            DELL          M09    
      HPET            DELL          M09    
      BOOT            DELL          M09    
      MCFG            DELL          M09    
      ____            DELL          M09    
      ASF!            DELL          M09    
      TCPA                    
      SLIC            DELL          M09    
      SSDT            PmRef        CpuPm
    scott cohen

  • Time Machine - Not Seeing My Buffalo LinkStation Hard Drive

    Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
    When trying to start Time Machine, I click "Choose Backup Disk" but the only drive listed is my Maxtor 750GB that I had when I purchased my iMac a couple of years ago. The Maxtor was purchased when I first bought the iMac because I wanted to use Time Machine (my iMac has a 750GB internal hard drive).
    Because the Maxtor 750GB is the only backup drive listed, I click "Set Up Time Capsule" but the "AirPort Utility" says it was unable to find any AirPort wireless devices. The only thing I can do at this point is "Rescan" which only proves the same result. There is a "Manual Setup" button at the bottom but it is greyed out and I can't select it.
    How do I configure the Buffalo LinkStation so Time Machine will view it as an available backup drive?
    Also, how would I do this if I added an additional hard drive (or two or three more)?
    I have a feeling this is probably obvious and I'm just missing it.
    Any help would be appreciated! Thanks in advance!
    Gtroop

    Gtrcoop007 wrote:
    Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
    Time Machine does not work well, if at all, with some NAS devices. See #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

  • Touchsceen will not work after installing new hard drive

    Hello,
    My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week.  I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working.  The only issue so far is that my touchscreen will not work.  HP support says it's a hardware issue and was no help. 
    Please help.
    Thanks,
    Mike

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Newly installed OS X will not start up on new hard drive

    Hello helpers,
    I have many problems with my Power book g4 titanium. Most critical: I have just replaced my Hard drive with a new 120 gb. I also, purchased a new dvd OS X 10.4 full retail version. I installed it onto the new hard drive. It loaded properly and said to restart. Well thats it. It will not restart. It acts like it is going to restart. But, all I get is the apple with a little wheel timer thing. I waited for several hours and that is all it does. Please help.
    Many grateful thanks,
    Rembrandt0328

    I suggest you re-prep your new drive then reinstall OS X.
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button and select the Apple Partition Map scheme, then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    When formatting has completed and the new volume has re-mounted on the Desktop quit DU and return to the installer. Proceed to install OS X.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • My macbook pro will not recognize my WD external hard drive 1tb

    My macbook pro will not recognize my WD 1 tb external hard drive that I have as my time machine backup. I worked just fine for a long time now The only way I can see it is through Disk utility. And when I try to repair the disk it say it cant be repaired, and i need to back up files and reformat. All my backups are on the hard drive. How do I back up the back if I cant get it recognized? Uggghhhhh I have several years of info on the hard drive .. PLEASE HELP!!!

    Hi cterry66,
    Welcome to the Apple Support Communities!
    I understand you would like to reset the user account password on your computer but do not know the original password. If you set up your Apple ID with that user account, you can use that Apple ID to reset your OS X user password. Please use the information provided in the attached article to complete the process. 
    OS X: Apple ID can be used to reset your user account password - Apple Support
    Cheers,
    Joe

  • Time machine will not backup to empty external hard drive after replacing Mac's internal hard drive and restoring

    First - I live in a tiny fishing village in Belize, so getting support here is virtually non-existent. There is no one else in my village who even uses a Mac. Recently, my hard drive in my 2012 Macbook Pro 13" went bad (said it suffered a "shock"?) and I was traveling to Cozumel, Mexico, so had it replaced there. We used an external hard drive backup to restore the data to it's last time machine backup (October of 2014). Everything was working fine, until I returned home, added some pictures, and wanted to do a fresh backup. Now, time machine will start the backup, but gets about 113,000 of 181,000 done, and it locks up. I can do nothing - everything freezes, and I have to eventually power down the computer. I even tried deleting the old backup from the external hard drive, erasing it completely, and reformatting the external hard drive using disk utility. Still locking up. It is a 5 GB external hard drive, so space shouldn't be an issue, and it was backed up to the same external hard drive previously with no issues. I'm still running Mavericks, and don't want to try to upgrade to Yosemite until I can be sure I have a backup of my old data and pictures. I am a writer, and use that to make my meager living LOL
    I'm stumped. I've looked through the files endlessly but can't find anything similar to my issue. Any suggestions? I know just enough to be dangerous, and don't want to lose everything we worked so hard to retrieve when my hard drive crashed last month.
    Thanks!

    SMH5206 - I tried letting it sit and crank overnight twice. First time I thought it was my error causing it to lock up. Now I know better. I haven't changed any of my time machine settings - and actually never used time machine regularly. Only reason I had a fresh backup from last Oct was because I did one before I upgraded to mavericks. Everything worked fine then - and we used that to restore when the hard drive crashed and was replaced. I have actually deleted hundreds of pictures off my hard drive and one entire user, so it should actually be a much smaller backup - so if it did it before on the same external hard disk, I don't understand why it won't now.  I'm really confused.
    Kahjot - the external hard drive is the same one I backed up to previously - and I have completely erased it and reformatted, and the information I'm backing up now is less, so there should be no reason why it doesn't have enough room now, when there is actually less information on my current hard drive (see my reply to SMH5206). When I plug it in, it says it is a 500.07 GB WD "My Passport"
    I've even tried to have time machine only backup certain files, and not the whole thing. Still locking up.
    I'm sure it's my error somewhere, - I just don't know how or where

  • TIme Machine will not back up to External Hard Drive

    I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions. I right click on my "Backup" drive and change the permissions to Read + Write but it just sets it back to "Custom". I'm guessing that the reinstallation changed my account information but I'm not sure how to fix this. My External HD shows in Disk Utility that it is still almost full of Time Machine backups but I have no way to access them or to continue to use Time Machine for future backups. Any help would be much appreciated. Thanks!

    crash888 wrote:
    I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions.
    What message did you get? You should never change permissions (or anything else) on a Time Machine drive -- TM does that for you.
    Start with #C2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    It will show you how to locate the message(s) that describe the problem, then help you fix it.
    If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.

  • Aperture 3 will not import image files on hard drives (need bug check).

    For the past several days, I've been encountering an issue where Aperture will not recognize photos on a local hard drive (internal or external) for import, but will recognize the exact same image if it is located on a flash card. In fact, I can drag an image from a card to my desktop and it will not be recognized. If I drag it back to the card, it is available for import again. It is not a 100% occurrence however, but doesn't seem to have any rhyme or reason. Restarting Aperture does not help, but this is not to say it won't be working fine the next day.
    I am investigating whether anyone else has this issue for a possible bug report.
    Thanks

    I'm having this problem right now. If I switch to a flash card reader with a card inserted, it immediately shows the thumbnails of files available for import. I just finished importing a backup folder of images and that worked as expected, but going back to other folders show nothing inside of them to import.
    The File Types panel from Import Settings shows no exclusions checked and the RAW+JPEG Pairs settings do nothing (in any case, this should only apply to RAW+JPEG pairs, which I don't have).
    Anybody else find anything that worked?

Maybe you are looking for