Windows 8.1 with bad_pool_caller when USB is plugged. Tryed almost everything. Need serious help!

Hail thee, noble ones.
After updating my Windows 8.0 to 8.1, I got this problem while plugging any USB pendrive - bad_pool_caller.
What have I to do to fix this?
3rd time I installed Windows 8.1, same problem.

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need
to allow the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for
all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the
system log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Similar Messages

  • I have an early 2011 macbook air 13..just installed windows 7 64 bit and my trackpad does not works and also my backlit keyboard does not function.tried almost everything. No help

    I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
    I did try all possible help i could found on internet. But no go.

    Hi Thank you,     the apple  mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    I tried this one but it did not work.
    iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

  • Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

    Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

    Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
    1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
    2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

  • I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. W

    I uninstalled Adobe Acrobat Pro due to Windows 8 malfunction with starting up. I am trying to reinstall as I am an owner of the Creative Suite CS6 and I cannot access my serial number. I purchased the software in 2013 and never registered i, apparently. When directed on Adobe's site to access the serial number, it takes me to an outside 3rd party site, which I tried but it does not actually work. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hey beccac85068042,
    Adobe will provide you the serial number only if you are a registered user.
    Please refer the following link to know more on registration for Adobe products:
    Adobe product registration FAQ
    You might Contact Customer Care and seek help on the same.
    Regards,
    Anubha

  • I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

    I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

    If not successful:
    Try DFU mode and then restore
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try another USB port and cable
    Try another computer to help determine if you have an iPod or computer problem

  • I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • HT201412 apple iphone 4 ringer does not respond, mute switch is off,no volume indication on screen. Tried hard restart and reconfigured via itunes, and nothing. Can hear ringtone via earphones. Have tried almost everything with no result. Any  suggestions

    Apple iphone 4 no ringer, mute switch is off, no volume indicator on screen. tried hard restart and reconfigured via itunes, have IOs 6.1.2, no jailbreak. Can hear ringer  with earphone- Have tried almost everything, buit nothing happens. Any suggestions?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Im unable to use my apple ID with imessage or FaceTime on my mobile. Ive tried almost everything but still no success. Please help!!!

    Im unable to use my apple ID with imessage or FaceTime on my mobile. Ive tried almost everything but still no success. Please help!!!
    Im getting the please try again youve used an incorrect password notification on the screen when I know for certain that im entering the correct password.

    This Apple doc might help ya out -> iOS: Troubleshooting FaceTime and iMessage activation
    Troubleshooting Apple ID activation
    After each step, toggle  iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that you have an active Internet connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
    If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    In Settings > General > Date & Time, ensure that Set Automatically  is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Enable  iMessage and FaceTime while connected to another Wi-Fi network in a different location.

  • Cold boot problem with X-FI Fata1ty card... Need serious help!

    Hey guys:
    I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
    . Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
    2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
    3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
    4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
    Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
    My rig specs:
    DFI Lanparty nF4 SLI-DR Venus
    AMD Opteron 65 CCBE 609 - Stock speed
    4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
    CPU Cooling - Tuniq tower 20
    2 x EVGA 7900 GTX Stock - SLI
    3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
    x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
    Pioneer Black DVR 0 DVD+/-RW - IDE /0
    Lian-li PC-V 200B Plus-2 with little case mod
    OCZ GameXstream 600W
    Creative Fatalty Sound Card w/ Front Panel
    Logitech Z5500 5. speakers
    I need serious help. This problem is so annoying.
    Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

    The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

  • Windows will not load while a USB is plugged into P67A-GD53 (B3)

    There are a couple issues here but that is the main one that I'm dealing with. I just built a new rig a few days ago and for some reason Windows 7 Ultimate 64bit will freeze at the Windows logo if I have any external devices (USB, speaker jack, etc.) plugged into it. If I unplug everything from it, Windows will start as normal, I'll just plug everything back in after the Windows logo screen and I'll experience no issues while running. I've installed all drivers that I could from the Windows device manager however, I was not able to boot from the drivers and utilities disk that came with the P67A-GD53 (B3). The CD would load to the Winki install options screen, I'd select to install and then the screen would go black. When I load the disk from the desktop the online update option sends me to a 404 page . No beeps on start up. Any ideas?

     Did you do a fresh install of Windows on the HDD or is it an old install and simply transferred HDD from old system?

  • Airport Express - Noise when USB is plugged

    Hi I just bought a laserjet printer and after I plugged the USB cable into the Airport Express, I hear some noise on the speakers of my stereo which is connected to my AEX. When I remove the USB cable everything is ok but with
    the USB cable plugged..there are serious noise
    I tried with another USB cable but same issue...
    Anyone experienced the same issue ?
    Thanks
    Vadim

    If you power-off and unplug the laser printer from power, but still leave it connected to the AX with a USB cable, does the noise stop? If so, reconnect the laser printer to power, but leave it power-off. How about now?
    Normally do you have the laser printer and/or AirPort Express Base Station (AX) plugged directly into a wall power outlet. If so, the same outlet? ... or do you use a power-strip for either?

  • Need serious help with my Zen Microphoto

    My Zen Microphoto controls are messed up. evrytime i try to use the vertical pad it actually forwards me to the next song. When i press back to return to the previous menu, instead of doing that it played music that i did not even select?
    I REALLY need some help here!!! Its a new Zen Microphoto bought only for a month....

    What did you do to control the senstivity of the touchpad. Do you set it to low or med or high I tried all, it is very upsetting not to be able to master something as simple as this. I love the player I just got it yesterday the sound is beautifull although I accidently had it turn to high when it started to play.
    Need a reply
    thanks:womanwink:

  • I need serious help with my nano!!

    So I was running the lastest iPod updater tool from Apple and I hit restore. The line went all the way then it said factory settings have been restored, although both the restore and update buttons were blacked out in the updater tool. The iPod never restarted like its supposed to when you restore it, it just kept on blinking do not disconnect. So I held down menu and the center button to manually restart it. It restarted in black and while blinking do not disconnect. The iPod updater program froze. I went to my computer and it said something like "Removable device" instead of "Andrew's iPod" and I clicked on it and it said it had to be formated. I hit no and then clicked "safely disconnect" and safely disconnected the iPod. I unplugged it and it showed a check mark saying "ok to disconnect". So then I disconnected to cable and it showed some battery ion then shut off. That makes no sense because it had been sharging for hours prior to this. Now when I plug it in it doesn't do anything. Nothing shows up on the iPod and I hit every button and nothing happens. The computer doesn't recognize anything. I need some help big time.

    figured it out myself

  • BSOD with BAD_POOL_CALLER when uploading jpg using webutil

    Forms 9.0.4, WebUtil 1.05, JInitiator 1.3.1.13, Oracle Drive 10.2.0.0.3, client OS XP SP2
    I use the following code on a WHEN-BUTTON-PRESSED trigger to upload jpg images to the database:
    declare
       myfilename varchar2(240);
       r_upload boolean;
       v_fabase_code fabase.base%type;
    begin
       default_value('c:\','global.default_directory');
       myfilename := webutil_file.file_open_dialog(
          :global.default_directory
          ,null
          ,'JPG|*.jpg|TIFF|*.tiff'
          ,'Select image...');
       if myfilename is not null then
          :global.default_directory := substr(myfilename,1,instr(myfilename,'\',-1));
          r_upload := webutil_file_transfer.client_to_db_with_progress(
             myfilename
             ,'FADRAWING'
             ,'PROFILE'
             ,'FABASE_BASE = '''||:FADRAWING.FABASE_BASE||''' and lv_drawing_type_id = '||:fadrawing.lv_drawing_type_id
             ,'Uploading...'
             ,'File upload in progress...'
             ,false);
       end if;
       commit;
       execute_query;
    end;This works excellent, except the file to upload resides on a OCS drive to which I'm connected via Oracle Drive.
    Steps to reproduce:
    Press button,
    select a file on the OCS drive,
    after upload press the button again -> BSOD ("Blue screen of death")
    I can reproduce this on three different machines, all running XP SP2. If I default the starting directory of the file_open_dialog to 'c:\' instead of :global.default_directory then it works. If I default the starting directory of the file_open_dialog to the directory on the OCS drive I straightly get the BSOD after pressing the button.
    I know that the Oracle Drive is quite slow and often defers file actions, but would this cause a BSOD?
    Any comments are appreciated.
    Thanks
    Gerald

    CREATE TABLE FADRAWING
      FABASE_BASE         VARCHAR2(10 BYTE),
      LV_DRAWING_TYPE_ID  NUMBER(20)       ,
      PROFILE             BLOB,
    )Then create a simple form including webutil with a data block for the table and 2 items for FABASE_BASE and LV_DRAWING_TYPE_ID and a button for my code (comment the line
    v_fabase_code fabase.base%type;)
    Enter values and save. Then press the button as previously described.
    Gerald

  • Need serious help with quicktime for windows. PLEASE HELP!!! : (

    So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

    i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Maybe you are looking for