Windows 8.1 x64 and sluggish screen

Hello. I have Windows 8.1 x64 installed to Dell M4600 laptop (using Nvidia Quadro 1000M) and Nvidia driver version 332.21 (newest atm). I have a weard problem. Screen is somekind sluggish and slow when browsing web pages and in windows explorer too.
It's not that slow like eg. using old windows xp without display driver. I have tried 3 different Nvidia drivers and everytime when I reinstall the driver everything works normally but after some time the sluggish screen comes back. Weard.

Hi,
Glad that you got your issue resolved.
Thanks for your efforts put on this issue and your sharing will benifit others who encounter the similar issue.
Just copy out the answers for others' using:
Here is the fix:
1. regedit
2. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
3. "Layers" might not exist, if so create it (New - Key)
4. Create a new String Value in Layers and name it "c:\windows\explorer.exe"
5. Modify it's "Value data" to " NoDTToDITMouseBatch"
6. Click ok and close regedit
7. Open cmd.exe as admin and enter "Rundll32 apphelp.dll,ShimFlushCache"
8. Reboot and enjoy
Note to Microsoft: If it ain't broke, don't try to "fix" it.
Kate Li
TechNet Community Support

Similar Messages

Windows 7 pro x64 and palm centro

I'm running windows 7 pro X64 and the software installed just fine, but not the driver. Does Palm have any plans for a solution? Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS. Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture.
Palm Inc. has historically not divulged any "future plans" for software (or hardware). Will a third-party develop a desktop client? I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

MOVED: Windows Xp Peo X64 and Via k8t neo2

This topic has been moved to Operating Systems.
Windows Xp Peo X64 and Via k8t neo2

Hello SeanTek and welcome to the Palm forums.
It has been years since I last performed a IR HotSync with a Windows box. It was really slow. I do think that you are on the right track. The trick will be to find a vendor who sells a IR adapter and has a 64-bit Windows driver.
Is running 32-bit Windows XP inside Microsoft's Virtual PC (now free) and option for cabled HotSyncing?
Alan G
Post relates to: Treo 755p (Sprint)

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64 and other microssoft x64 OS-s.

BUG! Not system locale Filenames support for 32-bit applications error in Windows 8.1 x64.
All Windows x64 (XP,2003,2007,Vista,7,8) have no support for not system locale filenames|foldernames for all 32-bit applications. I think it is BUG!
For example, it is possible to read files|folders with French or Chinese in English locale windows installed, rename it, but it is not possible open it, edit or delete. (ERRORS: File not found OR Unknown format)
With using 64-bit programs no such problems. How does it works and how can I fix this? Is it problem with encoding in translating kernel instructions for 32-bit apps in x64 Windows OS's? Whether there are
solutions to this problem OR some hacks|fixes?

Hi,
Have you installed the language package for French or Chinese?
If no, please download the language package and install them.
To download language package, please click the link below,
http://windows.microsoft.com/en-US/windows/language-packs#lptabs=win7
Best Regards.
Steven Lee
TechNet Community Support

Windows 8 not starting and black screen

HI!
My laptop is a HP Pavilion TouchSmart 15-n232sa. A few weeks ago when I tried to turn it on, it came up with a black screen and the HP logo with either a "Please Wait" or "Preparing Automatic Recovery" sign at the bottom of the screen. I've been on the troubleshoot pages and have tried all the steps applied for this problem and have spoken to someone on HPChat and they have said that there may be a problem with the motherboard. What do I need to do?

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
According to the message you have posted I suspect this could be because of the recent changes made if any.
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the battery too
Step 03. Press and Hold the Power Button on the Notebook for a full minute
Step 04. Test your Notebook with Power/AC Adapter and Battery alone [One at a time]
Step 05. Start the Notebook.
Step 06. Select "Safe mode" from the Advance Boot Option list
Note: Wait till you get to the Windows Desktop
Step 05. Please remove unwanted startup items and uninstall unwanted applications
Step 06. Please reboot/restart the PC the normal way
Note: Incase if these steps doesn't work you can continue troubleshooting the issue again
Step 01. Turn OFF the PC
Step 02. Power ON the PC and keep tapping F8 Key
Step 03. Select "Last known good configuration" from the Advance Boot Option list
Note: Wait till you get to the Windows Desktop
Step 04. Please remove unwanted startup items and uninstall unwanted applications
Step 05. Please reboot/restart the PC the normal way
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

I just upgraded to Firefox 4 and I get this error window that displays off and on screen this what I can read " ug-in object: TypeError:" and the second line "id] is undefined" but when I click the OK button the Firefox opens ok. What's wrong?

I'm running Mac OS 10.6

I also have the same issue with McAfee SiteAdvisor and FF4 on a MacBook Pro running the latest version of Snow Leopard. I have put in a service request with McAfee and will update this post in approx 48 hours unless they respond sooner. Seems like a far to common app to somehow have "missed" testing on a browser release that was scheduled for a while.

Windows Vista RC1 x64 and Audi

Anyone gotten their Audigy2 to work under this version? If so, please share what you did to get it to a state where you have sound. I've been installing/uninstalling and reinstalling for two days now, but I have NO sound.
Oddly enough... the game port on the card gets installed fine.

I've got the Audigy Platinum on a 64bit install, I've managed to get the drivers to install and vista to like them, but I can't actually hear anything. Yet the volume levels in vista do move, so sound is being produced, just not so I can hear it...

Driver for Deskjet 1220c (Windows 7 x64 and Windows Server 2008 R2)

Hi,
I've got a Deskjet 1220c and have recently upgraded two machines; one to Windows 7 Ultimate x64 and the other to Windows Server 2008 R2. Any idea where I can get printer drivers?
I'd like to try the Vista x64 drivers, though these were included on the Vista CD from MS, and not available as a separate download from HP (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762).
I'd be grateful for any suggestions.
Thanks,
Mt

Hi
I had this trobule too. Below is the instructions to install driver. Disconnect your printer. In printers select add printer. Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port. Once installed go into printer properites and update to USB port.
Bingo it works!
Refer to the below link for full instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
Good luck
RB

ITunes 10.1.1 Windows 7 Ultimate x64 Issues

I have recently upgraded my windows system to Windows 7 Ultimate x64 and after installing the latest iTunes i realised that i couldn't connect any of my mobile devices (2x iPhone 3G's or my iTouch 4G).
After hours of researching the web i came to the conclusion that the latest version of iTunes doesnt contain the proper driver files for my specific system.
Has anyone else had this problem ? Or is my (brand new) pc busted ?
P.S. After uninstalling iTunes 10.1.1 for the Millionth time, i installed the older 10 version and it worked perfectly.
I am going to try updating through the iTunes updater to see what happens.

No problems about the late response. Discussions has been quirky for a lot of people lately.
Since we last spoke, labnut2 has posted a nice step-by-step version of the RandomBehavior instructions in the following post:
http://discussions.apple.com/thread.jspa?messageID=12739276#12739276
Good luck for next week!

Adobe CS4 Design Center Premium Installation issues on Windows 7 Ultimate x64 (RTM)

I am in the process of moving my systems to Windows 7; as part of that I have attempted to install the Adobe CS 4 Design Center Premium version that I purchased on August 16th. Thus far my experience with this has been disappointing.
My previous system (Windows Vista x64 Ultimate) was running Adobe CS 4 Production Premium version without problems. Upgrading this to Windows 7 worked just fine (so, Win 7 upgrade over Production Premium worked.) However, for unrelated reasons I decided to reinstall a fresh version of Windows 7. and the Adobe CS 4 Design Center Premium version in question.
What I observe is a highly repeatable failure during installation, in which as soon as I get to the phase where it displays "Currently installing LangPack(English) for Device Central" and then dies. Applications are half installed at that point (I can actually use most of the tools, which is why I keep setting this aside to look at it later.) This was a clean system and Adobe CS 4 Design Center Premium was the first thing I tried to install on the box.
Since that failure, I have tried to install it on a completely different system (my laptop) running Windows 7 Ultimate x64 and experienced the same error. The desktop system is a Dell, the laptop is an HP.
The event log indicates a generic "event ID 1000" error. The detailed information shows that something returns STATUS_INVALID_PARAMETER (0xC000000D) as an exception, which is not handled and the program then dies.
Log Name:      Application
Source:        Application Error
Date:          9/11/2009 6:56:19 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      wam-mps1730
Description:
Faulting application name: Setup.exe_Adobe Setup, version: 2.0.138.0, time stamp: 0x48bf0040
Faulting module name: Setup.exe, version: 2.0.138.0, time stamp: 0x48bf0040
Exception code: 0xc000000d
Fault offset: 0x000ab71f
Faulting process id: 0xb20
Faulting application start time: 0x01ca32e6eed97c22
Faulting application path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Faulting module path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Report Id: e0e73da0-9eda-11de-8e4a-001e4ce53d44
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-09-11T13:56:19.000000000Z" />
    <EventRecordID>2221</EventRecordID>
    <Channel>Application</Channel>
    <Computer>wam-mps1730</Computer>
    <Security />
</System>
<EventData>
    <Data>Setup.exe_Adobe Setup</Data>
    <Data>2.0.138.0</Data>
    <Data>48bf0040</Data>
    <Data>Setup.exe</Data>
    <Data>2.0.138.0</Data>
    <Data>48bf0040</Data>
    <Data>c000000d</Data>
    <Data>000ab71f</Data>
    <Data>b20</Data>
    <Data>01ca32e6eed97c22</Data>
    <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
    <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
    <Data>e0e73da0-9eda-11de-8e4a-001e4ce53d44</Data>
</EventData>
</Event>
In attempting to find a work-around (since I would like to be able to actually use everything here) I have tried to run the installer in compatibility mode - both XPSP2 and Vista SP2 mode. Both fail in the same fashion.
At this point I've now installed a post-mortem debugger (WinDBG) and will attempt to capture more information about the specific failure. I am hoping that someone has seen this issue previously and has found a successful work-around. I see that others have installed the Master Suite version successfully and I suppose that is one potential solution to the problem that I may explore if i cannot get this package to work properly.

Additional information that I have collected (the wonders of a post-mortem debugger):
0:016> kv
Child-SP          RetAddr           : Args to Child                                                           : Call Site
00000000`024ce7e8 00000000`74b0a2df : 00000000`0c12faec 00000000`0c12fb04 00000000`04fda3e0 00000000`74b0a74c : ntdll!NtWaitForWorkViaWorkerFactory+0xa
00000000`024ce7f0 00000000`74aecf87 : 00000000`00000000 00000000`00001000 00000000`0c12fd30 00000000`7efa7000 : wow64!whNtWaitForWorkViaWorkerFactory+0x23
00000000`024ce840 00000000`74ad276d : 00000000`755d0f09 00000000`00000023 00000000`00000001 00000000`0c12fae4 : wow64!Wow64SystemServiceEx+0xd7
00000000`024cf100 00000000`74aed07e : 00000000`00000000 00000000`74ad1920 00000000`00000000 00000000`00000000 : wow64cpu!TurboDispatchJumpAddressEnd+0x24
00000000`024cf1c0 00000000`74aec549 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
00000000`024cf210 00000000`76f4d177 : 00000000`00000000 00000000`7efdf000 00000000`7efa7000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x429
00000000`024cf760 00000000`76f0308e : 00000000`024cf820 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x2bfe4
00000000`024cf7d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
0:016> !analyze -v
Last event: 770.978: Exit process 0:770, code c000000d
debugger time: Fri Sep 11 07:33:12.750 2009 (GMT-7)
0:016> r
rax=00000000000000c0 rbx=000000000c12fedc rcx=0000000000000000
rdx=0000000000000000 rsi=000000007efa7000 rdi=000000007efa9000
rip=0000000076f217ba rsp=00000000024ce7e8 rbp=000000000c12ff88
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000074b0a2bc r13=00000000024cfd20
r14=00000000024cf170 r15=0000000074ad2450
iopl=0         nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00000200
ntdll!NtWaitForWorkViaWorkerFactory+0xa:
00000000`76f217ba c3              ret
Thus, this appears to be related to WoW64 behavior in some fashion. I am unfamiliar with NtWaitForWorkViaWorkerFactory, so I'm not sure why it would be returning STATUS_INVALID_PARAMETER.
So, I've collected a mini-dump for the process, but it's 300MB. In the unlikely event someone is interested in analyzing it, let me know and I'll gladly provide it.
I'm now wondering if I should re-wipe this drive, install Vista, Adobe CS 4 Design Center Premium and then upgrade to Windows 7. But that is a lot of effort to work around an app compat issue.

Adobe Flash Player 9 Windows 2003 Enterprise x64 - Nav Buttons don't do anything

I'm curious if anyone has run into this out there. I'm using
the latest flash player, Windows Server 2k3 x64, and trying to
click some buttons which are characterized by the following:
<object classid="clsid27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="https://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6, 0,29,0"
height="24" width="140">
<param name="movie" value="*">
<param name="quality" value="high">
<param name="wmode" value="transparent">
<param name="FlashVars" value="*">
<embed src="*" flashvars="*" wmode="transparent"
quality="high"
pluginspage="https://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" height="24" width="140">
</object>
where * in the script are the url locations. The same buttons
have been verified to work on Windows XP and Windows Vista. I
dropped the IE security feature as well as all security features
down to there lowest possible setting with no luck.
Has anyone else seen this or does anyone out there have any
ideas on how to get 2k3 to function like the rest of the OS's?

As it turns out, another Windows 2003 machine is able to
click through the buttons..so this topic changes to ...does anyone
know what security or privacy feature may be hindering the ability
to click through these buttons?

Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64

GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data
Driver up to date - Sep 2014
First you need to download and have ready the following softwares:
Classic Shell V4.1: To get back the Start Button like Windows 7
http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
http://download.lenovo.com/consumer/desktop/h1100174.exe
Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
http://download.lenovo.com/consumer/desktop/h1101061.exe
NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
http://download.lenovo.com/consumer/desktop/h1100842.exe
Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
http://download.lenovo.com/consumer/desktop/h1100547.exe
Windows 8.1 x64 Installation DVD and Office 2013 x64
Follow this procedure for the installation:
Install Windows 8.1 Pro x64 using the general or personal key
Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
Install Office 2013 x64
Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in  “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
     Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
                                                                        BTW_12.0.0.9820.zip
    directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
     Windows will not be able to see the device in the “Device Manager”
Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
Final, enjoy.
This guide was creates for me to help peoples like me in this community.

bump

Windows 7 Pro x64 now BSOD just as it is starting and Startup Repair has failed

As the title says, a few days ago my Windows 7 Pro x64 started to BSOD just as Windows is starting but the error screen disappears immediately.
Startup Repair fails and has Problem Signature 04: 21199350
I have used the Windows 7 Pro installation DVD and opened its Command Prompt option and then run the chkdsk and sfc programs but no errors were reported. Also, I ran bootrec with /fixmbr then with /fixboot and finally with /rebuildbcd but it made no difference.
After a failure, the next time I turn on the PC I am offered to repair Windows or to start windows normally. Using the repair from here didn't work as also happened when I chose the repair option from the Windows 7 Pro installation DVD.
Holding down the f8 key when Windows is starting doesn't make any difference.
BTW, the crash happens as the 4 small parts of windows are approaching each other on the Windows start screen.
I can access my hard disk by attaching it to my laptop. If the error 21199350 reported by Startup Repair failure is not the BSOD error, will this be recorded in a file each time it happens? If so, which file?
Any help will be greatly appreciated as I dread having to reinstall Windows 7 Pro from scratch again and all the many programs I spent ages installing.
Thanks
Paul

Sorry for the delay in replying.
This evening I managed to modify the PC registry from the Startup Repair command window so it wouldn't reboot on BSOD.
Used regedit.exe to modify the following in the PC's registry (I followed the 17 July 2011 Terra-byte "Modify the Windows Registry from Startup Repair" article):
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CrashControl] and set AutoReboot to 0x00000000.
and also for ControlSet002.
The BSOD error is: 0x0000007B which seems to be a device driver problem.
Would my problem be caused by my installing 2x 2GB DIMMs that I bought on eBay into my Abit AB9 Pro motherboard's two free slots (the other two slots each have 1GB DIMMs) but on power on nothing happened?
Removing the two new DIMMs the PC powered on but then resulted in BSOD.
Thanks
Paul
Error 0x000000tB is a very often reported error. It means INACCESSIBLE BOOT DEVICE. Either something in your BIOS changed the type of storage device (AHCI -> IDE) or your HDD is experiencing a possible failure.
See info @ 0x0000007B (INACCESSIBLE BOOT DEVICE): Fix for Windows XP, Vista, 7, 8, 8.1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Windows 8.1 x64 and sluggish screen

Similar Messages

Maybe you are looking for