Windows 8.1 x64 Bit Black border in non-native resolution

Hello : i have a GMA 4500mhd GPU & i installed windows 8.1 & the default driver was fine all screen resolution havn't got the black borders but after i did the windows update it installed the
WDDM 1.1 driver. after a restart all non-native (under 1366x768) are not scaled to the monitor
.. when i had windows 7 x64 ; the recommended driver 15.17.19.64.2869 was fine
& it comes with it's own interface to adjust the options like performance & quality , scale full screen & stuff but windows 8.1 didn't let me install this driver so help me

Hello YellowMenace，
When you use the default driver, it works normally? After the Windows Update installing the WDDM 1.1 driver, the monitor resolution is changed?
Please share us a screenshot for better analyzation.
Please change the scaling option as MVP S.Sengupta mentioned.
If a new driver for your video card is causing problems, or an incorrect registry setting is preventing Windows from starting correctly, you can restart your computer using Last Known Good Configuration.
http://windows.microsoft.com/en-us/windows/using-last-known-good-configuration#1TC=windows-7
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

Ideapad U410 Touch (Windows 8 X64 Bit) Black screen upon start-up

Hi,
Two days back my pad suddendly stopped working. When i tried to power it on using the power button, all i see is a black screen. It does not load anything.
I have tried to start it using the recovery button as well but it only displayes black screen.
Can someone advise how this can be fixed.
Thanks

PROHIL10 wrote:
Hi LenBlazer,
I did and they seem fine.
I contacted Lenovo customer service this afternoon and they have advised me to send my machine to them. They also mentioned that they have recently been receiving same complain from other users as well and this seems to be caused by recent windows upgrades.
I agree that the next thing that you should do is to send the unit to Lenovo for repair. Just be sure that you have backup all your files and data since Lenovo might restore the drive to factory condition. Use one Key recovery and chose a location that can accomodate the backup image files.

Dear,Mozilla Firfox team. I wonder if there is a virsion for windows 7 X64-bit Arabic interface language ...,please send me in my mail and I will be thankfull.

windows 7 Ultimate X64-bit Arabic - HP pc (desktop) microtower 3300 serise MT

Before I answer, it should be clarified that the people in here are not developers or Mozilla employees. The people that answer questions here are users just like you, volunteering their time.
You can get downloads for different languages at http://www.mozilla.org/firefox/all/
Just download and install the Arabic version version, and your current data (bookmarks, passwords, etc.) should still be there.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Trackpoint autoscrolling in Windows 8.1Pro x64

I upgraded from Windows 7 Pro x64 bit to Windows 8.1 Pro x64 bit and now the track-point on my T61p 6457 doesn't scrollautomatically and there is no setting under Mouse settings/Track-point properties to effect this - I can only adjust sensitivity!
It is using Synaptics 16.2.19.13 (Sept 26, 2013).
Could you please advise how to get back autoscrolling in Windows 8.1!
Thankyou very much.
Philip

Additionally you can try > control panel > mouse > ultranav.
(see pic)
Cheers Paul :-)
T61,T9300,4gb,SSD,DVDRW,3G,Sata2,14.1-(4:3),IntelX3100,x2usb3 express,Win8.1

I-tunes for Windows XP Professional x64

I tried a lot to find out i-tunes for Windows XP Professional x64 bit
but i didn't get any solution for installing i-tunes in my laptop which had Windows XP Professional x64 bit.
when i asked to other person then at last i found only one reply that,
"If i want to install i-tunes in my laptop then i has to CHANGE OPERATING SYSTEM

iTunes is a 32 bit program.
The 64 bit installer has 64 bit drivers for burning and the iPhone.
If you don't have an iPhone you should be able to install the 32 bit iTunes and then download the 64 bit Gear drivers for burning from the Gear download site:
http://www.gearsoftware.com/support/drivers.cfm
You may need to enable scripts if you are using Firefox with Noscript.
If you have an iphone and want to try to get the 64 bit installer to work here are some links that may help:
http://yukichigai.googlepages.com/iphonex64
http://pctech.invisibill.net/?page_id=36
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/

Drivers audio para HPG60 WIn XP x64 bits

hola a todos necesito por favor el driver de sonido que es el unico que me falta ¨Audio device on high Definition Audio bus¨
y tambien el ¨Modem device on hight Definition Audio Bus¨ Ya me han ayudado con los demas drivers necesito estos dos muchas gracias mi sistema operativo es windows XP SP2 x64 bits
hi all Please I need sound driver is the only one I need
· Audio device on high Definition Audio Bus Routes ·
and also the ¨ Modem device on hight Definition Audio Bus · You have helped me with
the other two drivers need thank you very much my operating system is
x64-bit Windows XP SP2
sorry I not speak English !! lol
HPG60-445DX
p/n : NV225UAR#ABA

Alright, here's the lowdown on x64 drivers for integrated SB Live! 24-bit sound cards (ala the one in the MSI NEO4 Plat SLI).
Creative has a beta x64 driver program. You can find it here http://preview.creativelabs.com however, if you read the release notes these drivers EXCLUDE 24bit versions of SB Live!. From reading the preview site, it seems that it's not that the 24-bit drivers have not been written yet. It is that they will NEVER be written, AFAIK they are currently not under development (so bitching about it on the preview site wont help).
This leads me to creative main forums, where I find this lovely post. Apparently it is Creative's position that the motherboard manufacturer is responsible for providing the drivers to the integrated sb live card.
Hurrah for screw ups. MSI, it looks like Creative is screwing you on this one, please don't integrate anymore of their sound cards. Realtek has official x64 drivers on thier site already.
Does anyone know if MSI is planning to release sb live 24-bit drivers? Cause it looks like Creative sure as hell isn't.
BTW, There are x64 drivers for every other component on the MSI NEO4 Plat SLI except for the SB Live! 24-bit.
(This opinions are my own and not of my employer)

Black Border Box

Hello! My 20 month old did something to my computer that I don't know how to fix/get rid of.
When ever something is selected (desktop file, firefox window, any window, etc) there is a black border to the window.
How can I get rid of this?
Thank you!
Chris

Open the Universal Access pane of System Preferences, click on Seeing, and turn VoiceOver off.
(52710)

Native resolution problem on Boot Camp running Windows 8.1 on Macbook PRO 15 (2011)

Hello
Couple days ago I purchased a DELL U2414h display, and I came across some problems while trying to use it with Windows 8.1 on Boot Camp.
Everything works like a charm on MAC OS X and I get 1680x1050 resolution on my 2011 15 inch Macbook PRO, and 1920x1080 on the external DELL display.
The problem starts when I run Windows 8.1... I get my native resolution on the Macbook, but the maximum usable resolution on the external display is 1776x1000. There's an option to choose 1920x1080, but when I do that, the screen looks blurry. Is there any way to overcome this problem?
I'm using HDMI Adapter, and I installed all the drivers which were downloaded while installing the Boot Camp
Cheers
Patryk

No I haven't, but could it be the case? The same display with the same adapter works fine while running the MAC OS X.
But yeah, the adapter converts the mini display port to HDMI (as far as I know)
Thanks for the reply

Windows 7 Pro (x64) - Boot Camp 2.0 or 2.1? Boot Camp (64-bit)?

I recently got Windows 7 Professional (x64) - note it's NOT the beta - installed on my late '08 MBP (this was no cake walk...), and I have a question regarding Boot Camp versions. I'm pretty sure I have only Boot Camp 2.0 installed. When I try to run/install the 64 bit Boot Camp 2.1 version/upgrade for 64-bit Vista (BCUpdateVista64.exe), it simply won't start.
I read someplace that this is supposed to happen, as 2.0 is better for my current situation (Windows 7). Other posts seem to suggest I should download and install 2.1 in order to get everything working properly. Which is it?
Under Control Panel in W7, I have a blank icon that says "Boot Camp (32-bit)" and says application not found when clicked. Is there a 64-bit Boot Camp I can install?
I ask all this mainly because I suspect it may bring about some answers regarding trackpad support in Windows 7 (x64). Thanks in advance!

Snow Leopard changed things

ITunes 7.6 and Windows XP Pro x64 ---- 64 bit version of Windows XP Pro

My wife was given an iPod nano, so I downloaded the current version of iTunesSetup.exe from www.apple.com and tried to run the executable. It told me that it wasn't designed to install iTunes on my 64 bit version of Windows XP Pro, and that I should go back to www.apple.com and download the 64 bit installer. I went back to www.apple.com and searched for the 64 bit installer in vain. There is only one main link to the current installer and the website determines which version of the installer you're given. After a few google searches I managed to aquire iTunes64setup.exe from the Apple site. I ran the executable and it told me "This iTunes installer requires that your computer is running Windows Vista 64-bit" and then it gave me the option to exit. I ended up installing iTunes from the executable I had originally downloaded. I have iTunes 7.6.2.9 installed now but it doesn't detect, or can't operate my DVD burner, so I can't rip music with iTunes for use on my wife's nano. I get this error report when I run the Diagnostic test built into iTunes.
"Microsoft Windows XP Professional x64 Edition Service Pack 2 (Build 3790)
System manufacturer System Product Name
iTunes 7.6.2.9
QuickTime 7.4.5
CD Driver Not Available
CD Driver DLL Not Available
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number xxxxxxxxxxxxxxxx
Current user is an administrator.
The current local date and time is 2008-04-30 23:34:07.
iTunes is not running in safe mode.
Video Display Information
Standard VGA Graphics Adapter
NVIDIA GeForce 8800 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: Afc
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel."
And there was no change in the diagnostic when I first tried to repair the install and then tried to reinstall iTunes. I'm sure the burner is working because I can play music, watch movies and all the normal stuff a DVD burner can do using Nero.
I'm guessing I need an iTunes version of 64 bit optical drive driver.
Any help would be appreciated!
Cinder's
<Edited by Moderator>

I got the iTunes 7 to work on XP Pro 64bit. What I did was this:
1. Downloaded DriverInstaller_AMD64EM64T.exe
2. Installed it.
3. Created this file tree: C:\Windows\Sysnative\drivers (Easier terminology, I went into the Windows folder and created a folder named "sysnative", opened that folder and created another folder called "drivers".
4. Then I located the folder where I installed DriverInstaller_AMD64EM64T.exe ..
5. I took the file called GEARAspiWDM and COPIED IT. I DID NOT MOVE THIS FILE!!!
6. I pasted a COPY of this file into sysnative\drivers. The folder I just made.
7. I installed iTunes 7, not 7.6. 7.6 and this method won't solve the burning issue. That would require more programs and more patients.
Note, you will have to manipulate iTunes when you want to burn. The best way to do this, I found, was to simply make a playlist and right click the playlist on the left column and select burn to disk. It should act normally.
Message was edited by: Nexis

10.5.2 iTunes on Windows 7 x64 bit laptop - Quick Time will play videos but not iTunes

I'm hoping you can help, I've looked for a solution to this for a while now.
I store my itunes library on an external hard drive. I completed a clean install of x64 bit Windows 7 on my laptop - all went perfectly. Downloaded and installed the 64 bit version of 10.5.2 iTunes and located my library...the music plays fine but no videos. I opened iTunes in safe mode and it said that I needed the up to date version of Quick Time. Downloaded and installed that...no problems. Now my vidoes will play in the Quick Player but still not in iTunes! They apprear in the "Now Playing" pane but the timer doesn't move - even after pressing pause and play. Can anyone help me please? Do I need to open iTunes in 32 bit mode? If so, how do I do that in Windows 7? i can only find solutions for Mac's....
Thanks in advance

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Windows 7 x64 bit and iTunes not recognizing iPhone 3GS

Hello,
I'm sorry to bring this up again and I know the community has seen it a million times but I'm definately needing someone to point me in the right direction. I have an Acer 5552 Laptop with Windows 7 x64 bit. It does not have the Intel P55 chipset as what I have read before in these discussions, so updating the BIOS will not work. I have tried uninstalling and reinstalling iTunes x64 bit, removed and reinstalled the drivers and Apple Mobile Support software (which should do it by removing iTunes as a whole) and whenever I hook my iPhone to my laptop for a second sync it takes a long time to back up and then it gives an error, then when i try to connect it again iTunes says that the iPhone cannot be recognized and needs to be restored. I have done this 3 times in the past 2 months. This is a brand new laptop that I have. There should be no reason for this to happen unless I'm missing something. Is there any workaround to this? for the time being I'm syncing everything on an old, slow desktop that has Windows XP. It's worked with my old laptop which had XP on it great but sadly I gave my old laptop to my dad which he now uses to sync his iPhone with now.
Any help would be greatly appreciated..also if anyone has the same laptop model I have and have Windows 7 x64 on it..please let me know what you did if you got your 3GS to sync all the time with no problems.
Thank you very much.

4 days and no response...really??

Windows 8.1 x64 Bit Black border in non-native resolution

Similar Messages

Maybe you are looking for