Windows 8 64 bit OS + Dell Inspiron 15 7000 webcam is not working. Please help me.. It's urgent.

Hi Forum,
Till yesterday, my dell pc with w-8 64 OS webcam is working perfectly. Don't know what happen it's not working now.
Maximum tried for google solutions and tired of searching for solution .
I found that Unknow USB problem. Find below image. Please help me.

Hi Nitro,
Tried your advise but that too failed. Problem still continues. Again that same error "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor".
Please advise.

Similar Messages

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

Installed new update on my windows 7 laptop. Now I tunes does not work! Help!

See Troubleshooting issues with iTunes for Windows updates.
tt2

I just bought my I pad 2 and im trying to charge it via a USB cord connected to my Dell. It's not working please help

I just bought an I pad 2 and im trying to charge it via a USB cord connected to my Dell. It's not working please help

Not all USB ports provide enough power to charge the iPad. It may charge very slowly while the screen is off. Charge it using the included charger and you should be fine.

Webcam not working- Please Help

Hi,
I have a Pavillion g7, and the webcam will not work
I tried updating the drivers,
Uninstalling and reinstalling the webcam
and rebooting my computer.
I experienced this issue once before and it fixed itself.
When i open youcam, it says " new webcam found, would you like to use (HP-101), when I say yes, the same message just pops up again and again.
Device manager says that it is working properly.
Any help or ideas would be greatly appreciated

Maybe some help here:
http://support.apple.com/kb/ht2090
Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself

My G580 i5 Laptop Bluetooth Not Working Please Help me. Operating system - Window 7

Hi
My lapotp Bluetooth not working after update Lenovo readyCommn 5
Please help me and shotout my Problem
Laptop Detail
Ram -4 GB
Processor - i5
Operating System - Window 7 64 Bit
Wireless working fine only bluetooth problem
Please reslove my issue

I would suggest reinstalling the Bluetooth drivers for your G580
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

Windows not working, please help me

Hi ... I have a problem with windows 8 in my macbook pro, in the past year it happens twice, first time it was solved by itself and now happened again and take too long around tow weeks, the problem is " Whenever i turn the windows 8 it just gives me the windows 8 logo then usually gives me black screen but you can hear the computer working and some times after the windows 8 logo appears it come a blue background with message said " it looks like windows hasn't loaded correctly ", and with tow options restart ( and it dose not works with me ), and use advanced tools ... pleaaaase i need help i dont know what to do.
Best Regards,
Amro

Windows 8 Support

Dell Inspiron 1521 suspend/hibernate not working

Hi all, new Arch user here. I've tried working through the Acpid and Pm-utils wiki articles, but it's all just too confusing. I installed both the programs, and when I run either pm-suspend or pm-hibernate as root, All I get is my screen goes black. I press keys, open close the lid, but it just doesn't do anything, and power remains on when testing pm-hibernate. The only way out of it is to hard-reboot the laptop.
I am not sure where to start with all this. Here is my log from running pm-suspend:
Initial commandline parameters:
Sun May 22 11:52:38 MDT 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux Archy 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 07:54:18 UTC 2011 i686 AMD Turion(tm) 64 X2 Mobile Technology TL-58 AuthenticAMD GNU/Linux
Module Size Used by
cryptd 6445 0
aes_i586 6908 2
aes_generic 25638 1 aes_i586
snd_seq_dummy 1095 0
dell_wmi 1185 0
sparse_keymap 2468 1 dell_wmi
radeon 861119 3
snd_seq_oss 24256 0
snd_seq_midi_event 4416 1 snd_seq_oss
snd_seq 40160 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4220 3 snd_seq_dummy,snd_seq_oss,snd_seq
joydev 7343 0
ttm 43957 1 radeon
drm_kms_helper 23644 1 radeon
usbhid 30269 0
uvcvideo 54060 0
drm 141490 5 radeon,ttm,drm_kms_helper
hid 61230 1 usbhid
firewire_ohci 24615 0
videodev 56207 1 uvcvideo
snd_pcm_oss 33120 0
sdhci_pci 6718 0
firewire_core 41741 1 firewire_ohci
snd_mixer_oss 12487 1 snd_pcm_oss
crc_itu_t 1069 1 firewire_core
video 9652 0
i2c_algo_bit 4263 1 radeon
ac 2441 0
sdhci 14805 1 sdhci_pci
processor 21396 0
thermal 6403 0
wmi 7071 1 dell_wmi
battery 8609 0
button 3858 0
psmouse 54703 0
snd_hda_codec_idt 47489 1
i2c_piix4 7084 0
snd_hda_intel 18909 4
i2c_core 15688 6 radeon,drm_kms_helper,videodev,drm,i2c_algo_bit,i2c_piix4
snd_hda_codec 63981 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 4719 1 snd_hda_codec
snd_pcm 58607 4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15182 3 snd_seq,snd_pcm
snd 42019 17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 4858 1 snd
snd_page_alloc 5805 2 snd_hda_intel,snd_pcm
ohci_hcd 19364 0
ehci_hcd 34949 0
shpchp 22177 0
serio_raw 3358 0
dell_laptop 7047 0
sp5100_tco 3664 0
dcdbas 4148 1 dell_laptop
pci_hotplug 21458 1 shpchp
usbcore 113751 5 uvcvideo,usbhid,ohci_hcd,ehci_hcd
pcspkr 1375 0
k8temp 2583 0
ati_agp 4449 0
agpgart 21456 3 ttm,drm,ati_agp
b44 22473 0
mii 3246 1 b44
evdev 7086 10
arc4 1086 2
ecb 1573 2
b43 275118 0
ssb 39707 2 b44,b43
mmc_core 56619 3 sdhci,b43,ssb
pcmcia 30510 2 b43,ssb
pcmcia_core 9762 1 pcmcia
mac80211 181766 1 b43
cfg80211 123549 2 b43,mac80211
rfkill 11894 2 dell_laptop,cfg80211
ext4 304408 2
mbcache 4185 1 ext4
jbd2 58650 1 ext4
crc16 1069 1 ext4
sg 20662 0
sr_mod 12668 0
cdrom 30893 1 sr_mod
sd_mod 24780 4
ata_generic 2455 0
pata_acpi 2292 0
pata_atiixp 2856 0
ahci 17797 3
libahci 15830 1 ahci
libata 150345 5 ata_generic,pata_acpi,pata_atiixp,ahci,libahci
scsi_mod 105460 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 1803256 484756 1318500 0 22188 212416
-/+ buffers/cache: 250152 1553104
Swap: 1052220 0 1052220
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun May 22 11:52:39 MDT 2011: performing suspend

karol wrote:Can poweroff and reboot successfully?
I was so happy for the successful suspend and I didn't check the hibernation or reboot.
I read your post and I checked it at once.
Fortunately, everything works fine.
penguin geek wrote:I applied the fix as described on the site, and suspend works! Sadly, hibernate does not. It still does not power down
I use the uswsusp method for suspending to disk: https://wiki.archlinux.org/index.php/Su … ate-script

Compaq Presario Cq 60 116-ee Os-Xp Built In Webcam Mic doesnt work,,Please Help

Hi
I have a Compaq Presario Cq 60 116-ee Os-Xp
the mic on the webcam doesnt work
can anyone help me with the driver
I would appreciate the help
Ciao

How did you install xorg? What is your hardware? (lspci -vv) Please provide details.

My ipad mini is asking for a passcode and i havent set one up ive tried to reset bit its not working please help

I just

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Dell Inspiron 7000 Windows 8 Dual Monitor Setup

Dell Inspiron 7000 Windows 8
DVI and HDMI video outputs.
I want to connect two monitors. The Best Buy rep says use and DVI to VGA cable with splitter. However, I spoke to tech support reps here at work who set up and support computers and they said that may not work and if it does the displays may not extended but be mirrors of each other.. At work I use a higher end dell with the traditional docking station. The Dell Inspiron does not have that option. Using a cable is easier that purchasing what amounts to a usb hub that is called a USB 3.0 dual video docking station.

Hi,
I have the same issue here... I tried the adapter either for VGA or HDMI, but it still didn't work....Could you please let me know how to fix it? I used Dell before and everything was fine but only for this series... really waste me a lot of time to find an answer to fix it but didn't work....sigh..Thanks

Dell Inspiron 7000 - Dragon Assistant 3.0 Software Missing?

I purchased a 15.6" Dell Inspiron 7000 Laptop on 1-10-15 and it was supposed to come wiht Dragon Assistant, Voice Recognition Software pre-installed. It is NOT, however anywhere on this machine. It is advertised as being on the Laptop - both in the store, and on bestbuy.com. The following is the Laptop information:
Model: I7547-3020SLV
SKU: 8733845
I do NOT wish to return this system because I have already spent hours setting it up and tranferring files from my old system. Is there some download or a CD that you can send me? Thank you!

Hi danbon94,
I’m sorry to hear that your Dell laptop doesn’t have the Dragon Assistant installed as it should have. We entrust the manufacturers to deliver their devices to us with all of the appropriate pre-installed software. I greatly appreciate you sharing this information with me in regards to your Dell laptop, as it is concerning if devices are not arriving with all of the software advertised.
While the easiest way for us to correct this would be to process an exchange in hopes the new laptop would come with the software, I completely understand why you wouldn’t want to do that. In my experience, it can take some time to set up a new computer to your exact specifications and transfer any existing files from a previous computer. Please know I’m sending you a private message to gather further information in regards to your purchase and to see what options we may have for you. You may check your private messages by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
Best wishes,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

HP 3210 printer to Dell Inspiron 7000 series laptop.

Will HP3210 printer effectively connect to the Dell Inspiron 7000 series laptop?
Older model printer works extremely well. What portals/connections will be neede?
Thanks!

The Photosmart 3210 can connect either with a USB cable or a network cable. If you have an available port on your router the network connection may be preferred.
I have a similar setup, the printer is connected to my router with a LAN cable, I access the printer wirelessly from my notebook computer through the router.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
Thanks!

WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
so if anyone else has the same problem or any advice on how to fix the problem, please comment.

Windows 8 64 bit OS + Dell Inspiron 15 7000 webcam is not working. Please help me.. It's urgent.

Similar Messages

Maybe you are looking for