Windows 8 64bit - VPN 5.0.07.0440 - Disables all internet after installation

I am able to successfully install this version in Windows 8 and use it with the 442 error registry re-name workaround. Once I restart my computer, my internet access will no longer work. The adapter and settings aren't listed in ipconfig. I have a broadcom netlink integrated adapter. I was able to install this exact same version on my Windows 7 64bit laptop without issues. I don't know if there's a Windows 8 issue or a conflict with the network adapter. Please help!
Thanks in advance...

I have troubleshooted the issue further and discovered that if I disable "Deterministc Network Enhancer" and then re-enable it everything works. Is Cisco's Deterministic Network Enhancer conflicting with my Broadcom integrated network card? I upgraded to the latest version of the broadcom drivers and that didn't help.

Similar Messages

The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

Upgrade your browser to Firefox 8 and check
* getfirefox.com

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Customizing Calendar to disable all dates After Sysdate (Current Date)

Hi All,
I have a Requirement In OAF to Disable All Dates in the Calendar After the Sysdate
Ex: In Air Ticket Booking We can't Enter Previous Dates in the Calendar Like that I need to make the
my calendar dates after Sysdate Non Entarable
Please let me know if you have any sample code or We can fire any action before selecting a date to disable a particular set of Dates
Thanks,
Krishna

Hi ,
As per my opinion ,u shud put a check in PFR method at select event fire of date field ,capture the selected date anc check it shud be <= sysdate else throw a message using
throw new OAException ("this date should not exceed current date", OAException.ERROR);
Thanks
Pratap

Possible to disable all internet access on iPhone?

I'd like to get rid of all browsing on my phone. I've disabled Safari and App Store using restrictions. The problem is that there are several downloaded apps I'd like to keep that have built-in browsing. Is there a way I can keep these apps but get rid of their browsing capability?
Simply put, I don't want there to be any way to browse on my phone. How can this be done?
Thanks!

And switch Settings > General > Cellular > Cellular Data : OFF

SonicWall SourceNAT VPN setup as default route for all traffic!

Hi,OK hope someone can help with this mess.....Our customer has been taken over by a US company who have said all outgoing internet traffic must go via their data centre. They want us to create an IPSEC vpn from our SonicWALL TZ215 to them then route all traffic locally via this VPN.In principle this didn't sound too bad. Then there were some more options:Our local subnet 172.x.x.x has to be NAT'd to a single /32 address. 192.x.x.131They also require our destination network to be set as 0.0.0.0. as they wont specify the range at the datacenter.I have managed to get the VPN up but using the the NAT address as my local subnet and using the option on the SonicWALL "Use this VPN Tunnel as default route for all Internet traffic" on the remote network. Phase 1 and Phase 2 work ok. The problem i now have is i need to route all LAN traffic...
This topic first appeared in the Spiceworks Community

Hi Norbert,
I am sorry to say that configuring routes in Azure Virtual network is not supported. I recommend you to submit your reuqirement on Azure Feedback and hope it would be released soon:
http://feedback.azure.com/forums/217313-networking-dns-traffic-manager-vpn-vnet
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

What iis the status of 64Bit Windows 7 VPN client???

Any word on if or when they will post a 64 Bit Windows 7 VPN client??

Chris,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Disable creation of VPN "*Session" credential in Credential Manager without disabling all of Credential Manager?

Is there a way to disable creation of the VPN "*Session" credential in Credential Manager without disabling all of Credential Manager?
I know that you can disallow storing all domain creds in Credential Manager by setting the following registry entry to 1 (but this doesn't fix my issue):
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa
Value Name: DisableDomainCreds
Value Type: REG_DWORD
Value: 1
On my Windows 8 Enterprise workstation, I use mapped drives with one domain account and Outlook with a different domain account. Using the fix above fixes my issue with mapped drives (after sleep mode, reconnect to VPN and my mapped drives won't reconnect until
I delete the '*Session' credential) but then I cannot use Outlook at all. Note: I do not log on to Windows 8 with either of the domain
accounts mentioned above (I use a local admin account) and I do not 'save my password' in Outlook.

I should clarify my question: Is there a way to disable creation of the VPN "*Session" credential in Credential Manager
without disabling all domain creds in Credential Manager?
On my Windows 8 Enterprise workstation, I use mapped drives with one domain account and Outlook with a different domain account.
Normally I can use Outlook if I am connected to the vpn and I can use it if I am not connected to the vpn.
Normally I can use the mapped drives if I am connected to the vpn and I I can use the mapped drives if I am not connected to the vpn.
The vpn is essential for me to do my work for reasons other than the mapped drives and the usage of Outlook, but I need to be able to use the mapped drives and Outlook whether I am connected to the vpn or not.
Let's say my two domain accounts are these: drive-account and outlook-account. I must use the outlook-account for the connection to the vpn. When I connect to the vpn, it creates the '*Session' credential in the Credential Manager for outlook-account,
the mapped drives disconnect and they will not reconnect until I delete the newly created '*Session' credential. The error is 'An error occurred while reconnecting <drive letter1:> to <\\network\path> Microsoft Windows Network: The
local device name is already in use. This connection has not been restored.' Further evidence that it is the '*Session' credential causing the failure to reconnect is that I have two mapped drives and if I disconnect one of them and try to reconnect
the other one, I get a different error, 'An error occurred while reconnecting <drive letter2:> to <\\network\path2> Microsoft Windows Network: Multiple connections to a server or shared resource by the same user, using more than one user name,
are not allowed. Disconnect all previous connections to the server or shared resource and try again. This connection has not been restored.' Manually recreating that first connection then allows me to get back into both, but I should not have to
manually delete and recreate a mapped drive every time my computer goes to sleep. At least the manual deletion of the '*Session' credential is slightly less intrusive, but I'd still appreciate if there is a way to disable the creation of the '*Session'
credential without disabling all domain creds in Credential Manager. As I have said, if I disable domain creds using the registry fix some have suggested, I do not get the drive errors (after sleep mode and reconnecting to vpn), but I cannot use Outlook
at all.
Note: I do not log on to Windows 8 with either of the domain accounts mentioned above (I use a local admin account) and I do not 'save my password' in Outlook.

I have disabled all Kaspersky security, windows firewall and windows defender and Itunes still will not update my Ipod touch 4th gen to IOS 5, Helppppp!

I can't get the IOS 5 to work for windows Vista. I'm running kaspersky pure 2.0, windows firewall and windows defender. I have turned them all off, I then attach my Ipod 4th gen and I get the "cannot connect to itunes update server". I ran diagnostics in itunes and it tells me I dont have a internet connection. I'm on the internet right now, and I DO have a internet connection, but it tells me Itunes says otherwise. I'm able to send this message on the same pc with internet connection but keep running into this error. I have now read discussiong boards through apple and disabled all my firewalls, still no luck. I was able to update the lates version of itunes, and just waiting to get my ipod updated now, please help me.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Install oracle 10g (32bits) on windows (64bits)

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

Oracle 11G Express Windows 64bit Version

I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello Taleh,
Wer're just other users here trying to help other users, you'll have to contact Apple, maybe calmly ask to speak to a Customer representative, & see if they can help you.
Good luck & wishes.

Windows 8 64bit - VPN 5.0.07.0440 - Disables all internet after installation

Similar Messages

Maybe you are looking for