Windows 8 activation is not working !!!

I just bought a brand new laptop Toshiba Stellite P75 2 months ago, and then there's no problem with it until yesterday. I started the windows and got an error message that i need to active the window. So when i when to Windows Activation and hit the active button, it brought another error message
I've never got this problem before and I was so pissed off. What am i suppossed to do now?

Attachments:
1.jpg ‏204 KB
2.jpg ‏399 KB

Similar Messages

HT2188 iPad 1 requested activation after being low on power. Activation does not work.

Hi
My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes. this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
Thanks

I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
I plugged in the USB monitor and boom - I could log in.
Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
So the issue is the detection / setup of monitors in/out of the dock.
I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connect

Hi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Windows 2008 R2 does not work on Sunfire X4170

Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
Log Name:
System
Source:
Microsoft-Windows-WHEA-Logger
Date:
6/21/2014 12:24:59 AM
Event ID:
17
Task Category: None
Level:
Warning
Keywords:
User:
LOCAL SERVICE
Computer:
WIN-SOGS2TPM334
Description:
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x0:0x0
Vendor ID:Device ID: 0x8086:0x3406
Class Code: 0x30000
I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

Hello
Thank you for the update.
Please refer the below Knowledge document related to this issue:
Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
Best Regards
Bhavyesh

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

Right click on your Desktop and select Screen Resolution
Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
Then move the slider under Change the Size of All Items to Smaller and restart windows 8

Hierarchical Tree: When-Tree-Node-Activated is not working

I'm working Forms 10G rel.2.1 and also using application server 10G 2.
my problem is in Hierarchical Tree [When-Tree-Node-Activated] is not working in Enter this is working in Enter+Tab
I want to this trigger is working in only Enter.
I'm waiting quick response

node_value is only item which have transfer the form or report name
Trigger Name : WHEN-TREE-NODE-ACTIVATED
Declare
     htree                Item ;
Begin
     --clear_values;
--           htree := Find_Item('tree.htree');
-- Find the value of the node clicked on.
:node_value := ftree.Get_Tree_Node_Property(htree, :SYSTEM.trigger_NODE, Ftree.NODE_VALUE);
----Above node value transfer the procedure and call the form with node_value(Form Name)
     Execute_CMD_PROC;
Exception
     When Others Then Null;
End ;
when i enter then no value but when i enter+tab then show the form

Mysites Activity feed not working

Hi,
I have restored Mysite Content database.After restoring it, Profile pictures coming correctly but activity feed and trending tags not working(coming blank).
After restore db i did following:
IIS reset
Server reboot
Mysite setup settings(activity feed enabled)
Alernate access mapping.
Still activity feed not working.Please suggest.

Hello
Have you checked the timer job ?
http://technet.microsoft.com/en-us/library/hh344225(v=office.15).aspx
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Windows media player will not work as no DVD driver

Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

Hi
Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
To watch DVD movies you can use the programs like WinDVD or PowerDVD.
Such programs were designed especially for the DVD playing!
But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
Then you could download and install it to play DVD with WMP
Best regards

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

Windows media player is not working

windows media player is not working while i am playing any audio/video. it is saying server execution is failed

Please post your Product number (please don’t post your serial number).
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser

Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
Baskar

Hi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara

Windows 8 activation is not working !!!

Similar Messages

Maybe you are looking for