Windows 8 and hp office jet 6700 not compatible

Bought new computer with windows 8. Tried to load printer install disc for wireless printer..message tells me printer is not compatible with Windows 8. Need to know if this can be fixed and the steps to do so

Hi,
That's true for the CD because it was born before Windows 8. Please use the following package for your Windows 8 computer:
  http://ftp.hp.com/pub/softlib/software12/COL41871/mp-109007-2/OJ6700_1315.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HT2477 Are documentS created with Microsoft office for windows and Microsoft office for mac are compatible with each other

    Are documents created with Microsoft office for windows and Microsoft office for mac are compatible with each other?

    As with a lot of software, it depends on the version of Word, and what features the author used.
    Technically, Office 2010 for Windows and 2011 for Mac are supposed to be feature compatible. As are Office 2007 for Windows, and 2008 for Mac.
    However, if a person using Office 2010 / 2011 used a feature that only exists in that version and sends the file to someone using Office 2007 / 2008, they would very likely have trouble opening the file, or having it display as intended.

  • Wireless is not working on my new HP office jet 6700 premium

    Gents,
    i have a new HP office jet 6700 premium all in one printer and i coneccted to the network via wireless and its works only for 2 minutes and after that its not working via wireless unless i disconnected and reconected again please advice.
    FYI it is working very good by USB, and im using Mac OS X 10.9.3 version 
    Regards,

    Hi Kattoa,
    Welcome to the HP forums!
    I'm sorry to hear your Officejet 6700  doesn't seem to be holding it's wireless connection but I'd be happy to help determine what the problem could be
    I think it would be best if you followed this Printer Does Not Maintain Wireless Connection document as it should be able to help determine why the printer has to be reconnected so frequently.
    Let me know how that goes for you!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

    I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
    It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
    The Power on the actual printer is flashing slowly as well.
    I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is. 
    This question was solved.
    View Solution.

    Hello there! Welcome to the forums @Chinadoll702 
    I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
    Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
    Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
    Try printing from Text Edit on your Mac as well, and get back to me with the results.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How do I enable the e-cloud on my office jet 6700 and set up its email address

    I have a new iPad that I'm trying to enable to print. (I never had any trouble syncing my old one.) I have followed the instructions but it's still not working. It seems perhaps it's because the printer is not set up for Cloud? Yet, There is an icon on my office jet 6700 that indicates it is cloud capable.

    Hi @Mes17333
    Welcome to the HP Support Forums.  I gather that you are trying to print from your new iPad to your Officejet 6700 printer. 
    I am presuming that the printer is connected to your wireless network as you indicated that you were able to print with your older iPad.  To use Apple’s AirPrint feature you only need to have the printer connected to your wireless network and that the router supports Bonjour communication.
    If you are using the HP ePrint Mobile app or the HP All-in-One Printer Remote app, then please click on either app’s name and it will bring up the appropriate FAQ document which will have the trouble shooting steps to get the iPad printing. 
    Please let me know how things turn out.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

    I just purchased Acrobat and it says it is not compatible with Windows Vista. Is this true?

    Hi joe beischel,
    Kindly post this query in Acrobat forums:Acrobat
    Regards,
    Florence

  • The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

    The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.

    Upgrade your browser to Firefox 8 and check
    * getfirefox.com

  • Hp office jet 6700

    I would like to know how to change the order that my printer prints. It is now printing from last to first. I want to change it to first to last. I have a Mac with operating 10.9 operating system. I checked in Hp Utility could find whern to change page settings. I have two printers one is a Photosmart 7510 and the other is HP office jet 6700.IW would like to this on both printers.I had received a post but that ninformation was for windows not a Mac.
    Thanks, WCG

    Hello wlliam,
    I see that you are looking for some instructions on how to change the page order.
    I am attaching a screen shot that will show you where to go to make the changes.
    When you get the document ready that you want to print, click on File and then go to print and this window will pop up.
    Depending on the operating system on the Mac you are using, some minor differences may appear. 
    You can make the changes on the Page Order drop down arrow.
    Please let me know how you make out and if you need any other assistance, please feel free to write me back at any time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

    I have a new HP Office Jet 6700 Premium
    It had been working just fine, wireless printing from my iPad.
    iPad shows a window that recognizes the printer, but it does not print.
    There is no error message.
    This question was solved.
    View Solution.

    The steps below typically resolve the issue you’re experiencing:
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HT3669 Can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro

    Hi there, I can't scan from my HP Office Jet 6700 (Fax) to my MacBook Pro. I've tried all of the tips I've found online but when I try to 'Enable Scan to Computer' it says that there is a communication error. Anyone got any tips for me?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Dissatisfi​ed with HP Office jet 6700 Premium Printer

    I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer.  I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads.  I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment.  Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

    Please read this post then provide some details.   What operating system?  What are the error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hello  I have an I mac with Yosemite operating system.  I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows  without parallels my windows and my office is activated ,but if i run my parallel

    Hello
    I have an I mac with Yosemite operating system.
    I installed a windows seven 64 bit on it.
    also i have a parallels desk top with version 10.
    if i run my windows  without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
    My problem is activating my windows and office through parallels desktop .
    i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
    all of my application in windows works properly through parallels desktop except 
    activation of office and windows .
    I do not no any solution for my problem , i need for helps .thanks 

    It is not W10, it is the Technical Preview version of W10.
    Search on the Windows forums (fora for the latinist) for activation in the TP W10.

  • I have an app that is in my update section and it says it is not compatible with the I pad.  How do I get rid of it?

    I have an app that is in my update section and it says it is not compatible with the I pad.  How do I get rid of it?

    Never mind, I just needed to delete the app!  Which I thought I had done it was hiding right in front of my face!

  • Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office.  Is there a conversion program?

    Hi!
    Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office.  Is there a conversion program?

    Making changes to PDF file: Apple Support Communities
    Have just noticed this in a thread today.   The link from Klaus1's post may allow you to use PDF and work on it.   I haven't tried it but it may give you some extra ammunition.

  • "The source and output audio channels are not compatible or a conversion does not exist" - ?

    I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
    Thanks for any help!

    Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file.  Or something along those lines.

Maybe you are looking for

  • Browsing issue

    Ok so I have been running arch smoothly for about 6 months or so. in the past week for what ever reason in both firefix and chrome i have been unable to access imgur, every other site has been working fine when i try to get on the site it just times

  • S430 - Win 8.1 - WWAN Ericsson H5321 gw not working

    I have a ThinkPad S430 with a WWAN card preinstalled. The machine came with Windows 7, but I've actually wiped it and installed Win 8.1 However, I never managed to get the WWAN to work. When I enter the device manager I see some random flashes / upda

  • How to dereference objects during export flow

    Hello! I would like to export information from a referenced object during export flow but the referenced object is not part of the connector space object of the affected management agent. This is my demo configuration: testEmployeeData: - employeeId

  • Query_only and normal mode issue

    a form, consists of 5 columns from a data block is been called from a menu where it decides it should be query_only mode or noraml mode. my issue is query_only mode out of five only three are getting displyed whereas in normal mode all the five colum

  • Is it possible to download a song off of youtube?

    Is it possible to download a song off of you tube to your music?