Windows 8 and Ubuntu 14.04 - error recovery F11.
Help please at least someone. There HP Pavilion 15-p010sr installed on it from the factory Win 8, next to her, I installed ubuntu 14.04, ubuntu install a boot loader grub2. Everything worked fine but then fails and the loader completely broke, do not download anything.
I had to reinstall ubuntu, but then can not boot windows at the beginning of the load if you press F11 to begin restoration of the system but it does not happen, instead be happening loading grub2 console.
Is there any possibility to start the recovery windows?
Windows on the C: drive is not damaged can eat any possibility to download it via grub2, or otherwise?
Maybe there is some possibility to download the windows recovery console via grub?
If the recovery of the affected ubuntu, it is not critical. The main task to restore windows.
Did you create the usb HP recovery media as the setup script asked you when you first setup your notebook?
Unfortunately, it would seem that you may not have done that.
If not you can contact HP and request usb recovery media. HP may send it to you without cost if your notebook is still in warranty, but I cannot guarantee that.
You can also purchase usb recovery media from HP or an HP partner. Use the following URL.
http://h10010.www1.hp.com/ewfrf/wc/document?cc=nl&lc=nl&dlc=nl&docname=bph07143
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?
mine do the same thing... its one of the bugs from the 10.6.8 update
-
4GB Flash Drive not loading on Mac (but on Windows and Ubuntu)
Hello,
I have a 4GB flash drive (probably from LG) that I bought about 3 years ago. It was working just fine all this time but now, all of a sudden, it's gone. Not working, showing up neither in Finder nor in Disk Utility. But it works just fine on Windows 7 and Ubuntu. Files are even readable there. I tried re-formatting it on Ubuntu in FAT-32 but it still won't show up on a Mac.
Any other flash drive is showing up on my computer (tested with 2 different ones).
Any clue?I don't claim to know the solution to your problem, but in your situation I would try either or both administrator install methods: 1) Right-click the downloaded install file, choose "Run as Administrator" and install the software as usual. 2) Try using a different Windows account that you are positively certain has full administrator rights or the actual Administrator login name, install with that account.
Also, make sure you empty the browser cache before retrying the http pages. What about other browser settings, like security or privacy settings? Any add-ons or antivirus browser helper objects?
Do you only use Internet Explorer, or is this issue the same in Firefox, Opera, Chrome and Safari?
Good luck, hope you get the error fixed. -
Tripple boot: Mac os, Windows and Ubuntu
Dear All I need some help....
I installed mac os (leaopard) on my macBook and then used the boot camp to install windows, and it is installed successfully. I then created a partition in macos for ubuntu and restarted to isntall ubuntu. I installed the ubuntu in the second last partition created by mac os. now I have three operating system installed but when I open to boot from windows operating system It try to starts but it give me an error option that there were some hardware or something might be changed and there are some options to start windows, one is "Start windows normally" when I select this option, it restarts the mac book. I am not able to use windows xp on my macbook while macos and ubuntu are working correctly....
Can any one help me????
IrfanI have followed the same procedure to install these operating system. And infact I have installed these successfully. But when the windows is started in the mid of the startup it stop and gives me a black screen with some options like
- start in safe mode
- start with support of networking
- start in command mode
- start windows normally
when I select the option "start windows normally" it then restarts and give me the rEFIt options....
Irfan -
What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
work under Mac OS based Parallels (running Windows or Ubuntu) - WHY? Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released. This is an HP problem, not an Apple problem.
Exacty what printers are you having problems with?
If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything). This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers. -
Differences and Similarities between Windows and Ubuntu...
Windows version Ubuntu’s version
Microsoft Office OpenOffice Suite
Word OpenOffice Word Processing
Excel OpenOffice Spreadsheet
PowerPoint OpenOffice Presentation
Access OpenOffice Database
Internet Explorer Firefox
Outlook Evolution
advanced e-mail client Thunderbird
MSN / AIM / Yahoo / Gtalk / IRC Pidgen
Photoshop Gimp
Quicken / Quickbooks GnuCash
Microsoft Publisher Scribus
Microsoft Project OpenProj
Adobe Acrobat Professional “print to a PDF file” is built-in
Adobe Illustrator Sodipodi
Windows Media Player VLC
iTunes Rhythmbox
Picasa F-Spot
Nero CD/DVD burning Brasero
CD ripping Sound Juicer
BitTorrent / uTorrent Deluge
Windows Image Viewer F-Spot
Final Cut Pro / Avid Liquid Kino
Visio Dia
FrontPage KompoZer
DreamWeaver Screem
Skype Ekiga
Notepad Text Editor
muti-user collaborative editor Gobby
wifi network manager Wifi Radar
audio editing and/or recording Audacity
hyperlinked post-it notes Tomboy
desktop sharing / VNC / virtual Vinagre
WinZip File Roller, 7zip
Window Media Center / TiVo MythTV
WinFax GFax
graphic charting Inkscape
charting for programmers Umbrello
backup —to local or network Simple Backup
backup —to CDs or DVDs Home User Backup
backup —including config files QuickStart
WinRAR File Roller, 7zip
eMule downloading aMule
karaoke KMid
3-D Studio Blender
FTP client FileZilla
database management MySQL
audio handler PulseAudio
anti-virus / anti-spyware none needed
run Windows applications Wine, Wine Doors, Playonlinux
disk usage analysis Disk Usage Analyzer
And HERE is a link to Ubuntu's "Switching from Windows Page"
***I did NOT create the above list, I cut it from the NET. It does seem to be an up to date list of FREE tools/ application that doeswhat the windows version does***
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!Mrpeter1985,
Hmm.. I'm not sure that's how I'd interpret the warranty statement in the EULA.
I don't think it means that your license is void if you get a virus, but rather that the warranty of the performance of the software might be void. I would also postulate that it's not a permanent void. Reloading should be fine.
My interpretation is that MS is reasonably saying that if the OS malfunctions because it is infected by a virus that they aren't responsible to fix the code. I.e. if you escalate a bug as a normal course of action, they would support it under the terms of the warranty, but if the bug were the result of virus corruption, then they aren't on the hook.
In any event - interesting discussion, but in practice... clean the virus or reload, right?
Plenty of good reasons to like Windows or to like Linux.
Different strokes for different folks, right?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Windows and system recovery won't launch
I have HP Pavilion dv7-2015TX. It is running Windows Vista when it used to work. It stopped loading windows and initially offered me the recovery mode or starting windows normally. When I chose the recovery mode it kept asking me to find the operating software to repair which it couldn't find. Now I'm not even being offered that option. Hitting esc on startup brings me to the startup menu. I've run System Diagnostics and done a start-up test where it came up with no errors, stating startup test passed. The Error log comes up with 0305 @ Time 07132013-185631; 0601 @ time 06082013-080914; 0601 @ time 06062013-183504; and 0305 @ time 11152012-033540.
Choosing the system recovery option just makes it start to try and load windows and I end up back with a blue screen and an arrow.
If I just let the system continue its boot without hitting the esc key and going to the startup menu, then it starts to load windows but eventually also ends up on the blue screen with the white arrow.
I have made a set of recovery discs but can't get the system to load from them either. Repeatedly hitting F11 on startup doesn't stop the system from trying to load windows and then the blue screen. Hitting F9 just gets me to a black screen with a line of incomprehensible characters.
Any suggestions would be greatly appreciated.
Thanks!I really suspect that your hard drive is bad and will have to be replaced. Not sure though if this would also be causing the problem of booting from Recovery Disks. Can you boot from any other disk?
Get a utility cd such as PW. It will allow you to test hard drive, format it if possible.Scroll down on the page and get> Bootable CD ISO and> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is Here. Once created, boot from it. Delete any hdd partitions, create one and format.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
T430s fingerprint reader fails in both windows 7 (64 bit) and ubuntu.
Hi,
I have 4 months with my new t430s, and so far so good, I created a partition to instal ubuntu and I was able to have the finger print reader work in it.
The last week I left the laptop's battery to drain completely, but I did not notice it... I tried to wake it up but my fingerprint would not turn it on... I plug the charger on and the laptop started working again but now, my fingerprint log on was disabled, I had to type my pasword to log in...
From that moment on, this issue consistently occurs in both windows & and ubuntu...
The funny thing is that I can still turn on the laptop with my finger, the fingerprint reader indicator leds are working but the device only works to start the laptop. I have tried to delete the fingerprint data from teh BIOS, but I can still start the laptop, so I dont think this clear data command on the BIOS is doing anything...
I have tried re-installing the device, updating the driver, etc and nothing works, the device appears as unnavailable on the windows biometric devices section of my control panel, so I cannot enroll any new finger print using the lenovo fingerprint software since I get these 3 errors in any attempt:
E7210005 Cannot enroll user.
E7210005 Cannot update passport.
E7210005 Cannot find fingerprint sensor device.
Any ideas?
Is there a way to reset my device from the BIOS so al its data and its state is cleared?
Thanks!
Roberto O.rortegah
I have heard of this exact situation one other time, where fingerprint sensor stops working properly after PC unexpectedly turns off due to low battery. I think your fingerprint sensor has malfunctioned and needs replacement under warranty. Currently, I do not know of any other solution.
But can you please tell me:
1. how many fingers do you have enrolled?
2. do you use any BIOS passwords (such as administrator password, power-on password, or HDD password)? -
Network drivers not working and Windows Error Recovery Message issues
I have a ThinkPad laptop T530 series in which about five of my network adapters are showing the exclamation mark in a yellow triangle next to them. When clicking on properties, it states that" this device will not start--code 10." I have tried the network sharing troubleshooter and this has not worked.
The second issue I am having is that upon starting my computer I am constantly getting a Windows Error Recovery message which I have to press on the proceed to Windows as the startup repairs do not seem to rectify the issue.
I would very much appreciate if someone could help me resolve these issuesI don't have a solution to your main problem, but I have one for the error message.
If I am right, then Airport is causing the problem. 192.168.1.1 is the address that the Airport Base Station will take right away. To fix this, you need to go into Airport Admin Utility. Click on your base station and click "Configure." Click on the "Network" tab. Now it should look something like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture2.png
The problem is that the Airport is using the same IP number set as the router that you have. If you disconnect or unplug the Airport, then that would fix it easily, but if you want to keep your Airport connected, then all you need to do is pick one of the other number formats, like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture4.png
Now, I'm no expert on this stuff, but from what I understand, this could get you one step closer to your destination. Good luck! -
HP G62 Windows Startup error recovery Failure
Notebook:
HP G62 - 228CL
Running Windows 7 64-bit
Hello everyone, I need a bit of help.
My computer will boot windows 7. When I start it up, it tries to boot up. I then get a Windows failed to boot message on the windows error recovery screen and asks me if I would like to use Windows Startup Repair Tool to fix the Problem. But the tool never starts up. It just leads to a windows background and does nothing. I have also tried using f11 System recovery but it does nothing.Hi,
Firstly, regarding your existing files.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Secondly, regarding the replacement of the Hard Drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 52 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - the procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards and happy holidays,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Could use help dual booting windows 8 and ubuntu 13.04
I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS'sI have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's -
I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
Windows and iTunes won't recognize my iPad outside of recovery mode
Okay, so there's a lot.
1) Unless I put the iPad into recovery mod, plugging in my iPad to my laptop gets no alert sound whatsoever, meaning it's not being recognized. The only thing that I DO get, is the iPad charging. However, there's more! My iPad sometimes appears like it's not even being plugged in, no charging, no recognition. But it's not my cable, I tried my brother's newer cable and the same thing happened. I plugged my cable into my wall charger and into a socket -- works perfectly.
2) Sometimes, the iPad would get detected by Windows and install drivers, but iTunes still wouldn't pick it up or start automatically. I checked into the device manager and Devices and Printers, it was listed there and the status said it was working fine. I tried updating the drivers, it said the drivers were the best ones available. This is no longer happening however, due to further developments listed lower.
3) I tried everything here: iOS: Device not recognized in iTunes for Windows and nothing works there. That includes uninstalling all iTunes/Apple related software in the specified order somewhere in the help sections, restarting the laptop, and then installing iTunes and restarting again. Didn't work.
4) I tried stopping/starting the Apple Mobile Device process in Control Panel>Services. No effect.
4) I tried the steps where you go into Common Files>apple>x>xdrivers and using the file there, but it would say it's incompatible or something to that effect. So that didn't work.
5) I restored my iPad without iTunes. When I attempted to restore the iPad with iTunes, it gave me an error message (4005,I think), and said it could not be restored. Full stop. Thus why I wiped the iPad using the option in Settings>General on the iPad itself. But wiping it achieved nothing.
6) I put my iPad back into recovery mode to get it recognized in iTunes and Windows again, where before I could get out of recovery mode, I can no longer do that and it appears to be stuck on that screen. Turning it off doesn't change that, because when I turn it back on, it goes directly back to the screen with the Cable + iTunes logo image.
7)Note again, that being in recovery mode will *almost* always allow my laptop and iTunes to recognize the iPad. If I look into Devices and Printers now, it doesn't show up as iPad, it shows up as Apple Mobile USB Device Driver. in iTunes, it shows up as iPad and I get the notice "iTunes has detected an iPad in recovery..."
8) My iPhone works fine and can update, get immediately recognized, etc. So I'm also sure there's no problem with my USB ports in terms of being functional.
Please help me. This has been really frustrating.You should use a USB port on the back of your computer when you connect. What other devices do you have connected to the USB chain (other than your keyboard and mouse)?
You need to read this article: http://docs.info.apple.com/article.html?artnum=305136 Even if no new driver is available for your computer, reload the USB Driver following the instructions in the article.
Once your iPod can be seen in Device Manager in Windows, change the drive letter on the iPod to something higher (try M or P) and then reformat it (FAT32 format, don't do a quick format). After this Restore it in iTunes. -
Ipod touch stuck in recovery mode and will not restore. error code 3194
ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help
Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it. -
NEED HELP w/ P35 Neo Combo and Windows XP Install Stop 0x24 error BSOD
First a little background, in case it's relevant:
I was running a 865PE Neo2 with 4 x 1gig Corsair DDR2 6400. Otherwise, same specs as below. Ran it for 2 years without a hitch, then got a virus that corrupted my profile and had trouble booting, logging on, and persistent virus messages. Long story short, I fried the BIOS and decided to replace the mobo and upgrade the memory, keeping the rest of the system intact. I previously had windows installed on both partitions of the HDD but changed the name of the directory for Windows on the C: drive so it would boot from the D: drive.
I have replaced 865PE with the P35 and changed the boot sequence to boot from CD. The BIOS loads fine, and I get to the windows setup screen ok. Whether I opt for Recovery Console, or a new install of Windows, I get a BSOD error message below.
STOP: 0x00000024 (0x001902FA, 0xf7906700, 0xf7906400, 0xf7103bef)
ntfs.sys Address F7103BEF base at F709f00, Datestamp 3d6de5c1
I tried with both new and old memory (in the right slots) and get the same message. I booting with no memory because I read in another post that the system should beep to indicate no memory and there was no beep.
BIOS recognizes the HDD, CPU and Memory so not sure what the problem is. Should I try taking the HDD out and reformatting it on another PC? (not easy since I don't have another desktop pc) Please help with some suggestions. Thank you.
System Specs
P35 Neo Combo Mobo
BIOS ver 1.3
E6400 Intel Dual Core
1 x 2 gig Crucial PC3 8500 DDR3 1066 mhz
nVidia 8800 GTS graphics
WD 250 gig Sata HD w/ 2 partitions of 125 ea.
Antec 500W SmartPower PSU
Installation disk is Windows XP Pro sp1STOP: 0x00000024 indicates corrupt NTFS file system on the hard drive
Reformat would be the best thing to do. Download WD Data Lifeguard for your HDD, make the disk and run it.
http://support.wdc.com/product/download.asp?level1=6&lang=en
Quote from: FlyingSteve on 18-August-09, 10:29:00
I didn't know that the P35 Neo board ran ddr3...
That's where the 'Combo' part in the name comes into play, 2 DDR2 or 2 DDR3.
From MSI description of MB:
Main Memory
• Supports two unbuffered DIMM of 1.8 Volt DDR2 667/800 SDRAM. (Max: 4GB)
• Supports two unbuffered DIMM of 1.5 Volt DDR3 800/1066 SDRAM. (Max: 4GB)
Maybe you are looking for
-
I am trying to instal CS5 onto my new computer. My other one was stolen. Serial number doesn't work.
I am trying to instal CS5 onto my new computer. My other one was stolen. Serial number doesn't work.
-
How to create a table in mysql tool kit
Hello Sir/Madam, H How to create a table in mysql using the labview tool kit,,,I need the hyperlink to download this tool kit, Thanks and regards Jack Jayavel
-
BPM 11g integration with UCM11g using Java Enbedded acitivity
Hi Friends, Can anyone throw some idea how to integration with BPM11g and UCM11g We need to have a java code using Java Enbedded acitivity. 1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC) 2)
-
How to I get my iWeb website online without a domain name and using iCloud or .mac....
I want to publish my iweb website online. Since we no longer have mobile me do I use icloud, and if so how do I do it?
-
Read report - deleted without reading
Sent a letter with the "read report", and Icamethe message status. "was delivered and not read" - in Outlook and "was deleted without reading" - in the mail client Iphone, Windows Phone In this case, the recipient has not read the letter, and it was